dmesg - byte
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.0-12-generic (buildd@vernadsky) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU!
NX (Execute Disable) protection: approximated by x86 segment limits
DMI 2.3 present.
DMI: Hewlett-Packard HP d330 uT(DC579AV)/085Ch, BIOS 786B2 v2.44 08/07/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x5fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 040000000 mask FE0000000 write-back
2 base 0FEDA0000 mask FFFFE0000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000060000000 - 00000000feda0000 (usable) ==> (reserved)
found SMP MP-table at [c00faa60] faa60
initial memory mapped : 0 - 01c00000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
RAMDISK: 36606000 - 372fb000
ACPI: RSDP 000e9e10 00014 (v00 COMPAQ)
ACPI: RSDT 000e5640 00080 (v01 COMPAQ CPQ0064 20080807 00000000)
ACPI: FACP 000e56f8 00074 (v01 COMPAQ SPRINGD 00000001 00000000)
ACPI: DSDT 000e5808 00D7D (v01 COMPAQ DSDT 00000001 MSFT 0100000E)
ACPI: FACS 000e5600 00040
ACPI: SSDT 000e6585 00685 (v01 COMPAQ PROJECT 00000001 MSFT 0100000E)
ACPI: SSDT 000e6c0a 0054C (v01 COMPAQ CORE_PNP 00000001 MSFT 0100000E)
ACPI: SSDT 000e7156 001F2 (v01 COMPAQ CORE_UTL 00000001 MSFT 0100000E)
ACPI: SSDT 000e7348 0032E (v01 COMPAQ VILLTBL1 00000001 MSFT 0100000E)
ACPI: SSDT 000e7676 0053F (v01 COMPAQ LGCYLITE 00000001 MSFT 0100000E)
ACPI: SSDT 000e7bb5 00167 (v01 COMPAQ UART2 00000001 MSFT 0100000E)
ACPI: SSDT 000e7d1c 0014E (v01 COMPAQ FLOPPY 00000001 MSFT 0100000E)
ACPI: APIC 000e576c 00068 (v01 COMPAQ SPRINGD 00000001 00000000)
ACPI: SSDT 000e9b2c 000B2 (v01 COMPAQ APIC 00000001 MSFT 0100000E)
ACPI: ASF! 000e57d4 00034 (v16 COMPAQ SPRINGD 00000001 00000000)
ACPI: SSDT 000e82d8 0040F (v01 COMPAQ PNP_PRSS 00000001 MSFT 0100000E)
ACPI: SSDT 000e86e7 0016D (v01 COMPAQ UR2_PRSS 00000001 MSFT 0100000E)
ACPI: SSDT 000e8854 00119 (v01 COMPAQ FPY_PRSS 00000001 MSFT 0100000E)
ACPI: SSDT 000e8a22 00167 (v01 COMPAQ S3 00000001 MSFT 0100000E)
ACPI: SSDT 000e8b89 000DD (v01 COMPAQ CORE_S3 00000001 MSFT 0100000E)
ACPI: SSDT 000e8c66 00144 (v01 COMPAQ PIDETM 00000001 MSFT 0100000E)
ACPI: SSDT 000e9200 001B5 (v01 COMPAQ GTF0 00000001 MSFT 0100000E)
ACPI: SSDT 000e8daa 00155 (v01 COMPAQ SIDETM 00000001 MSFT 0100000E)
ACPI: SSDT 000e956f 001BA (v01 COMPAQ GTF2 00000001 MSFT 0100000E)
ACPI: SSDT 000e9729 001BA (v01 COMPAQ GTF3 00000001 MSFT 0100000E)
ACPI: SSDT 000e98e3 000F0 (v01 COMPAQ L08 00000001 MSFT 0100000E)
ACPI: SSDT 000e9d30 00078 (v01 COMPAQ FINIS 00000001 MSFT 0100000E)
ACPI: Local APIC address 0xfee00000
647MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0005fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0005fff0
On node 0 totalpages: 393087
free_area_init_node: node 0, pgdat c17b11c0, node_mem_map f5a06200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 1296 pages used for memmap
HighMem zone: 164578 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f5400000 s26240 r0 d22912 u2097152
pcpu-alloc: s26240 r0 d22912 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390015
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 6290944 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0005fff0)
Memory: 1530180k/1572800k available (5329k kernel code, 42168k reserved, 2589k data, 696k init, 663496k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc17bc000 - 0xc186a000 ( 696 kB)
.data : 0xc1534784 - 0xc17bbd80 (2589 kB)
.text : 0xc1000000 - 0xc1534784 (5329 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f4808000 soft=f480a000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2793.216 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.43 BogoMIPS (lpj=11172864)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
SMP alternatives: switching to UP code
ACPI: Core revision 20110413
ftrace: allocating 24885 entries in 49 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
Brought up 1 CPUs
Total of 1 processors activated (5586.43 BogoMIPS).
devtmpfs: initialized
print_constraints: dummy:
Time: 19:39:09 Date: 04/20/12
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.20 entry at 0xec1a9, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [mem 0x60100000-0xfebfffff]
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
pci 0000:00:00.0: Enabling MCH 'Overflow' Device
pci 0000:00:00.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
pci 0000:00:01.0: [8086:2571] type 1 class 0x000604
pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0x2440-0x245f]
pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0x2460-0x247f]
pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0x2480-0x249f]
pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xf0a00000-0xf0a003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: Enabled i801 SMBus device
pci 0000:00:1f.0: quirk: [io 0xf800-0xf87f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH4 GPIO
pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
pci 0000:00:1f.1: reg 10: [io 0x24e0-0x24e7]
pci 0000:00:1f.1: reg 14: [io 0x2800-0x2803]
pci 0000:00:1f.1: reg 18: [io 0x24e8-0x24ef]
pci 0000:00:1f.1: reg 1c: [io 0x2804-0x2807]
pci 0000:00:1f.1: reg 20: [io 0x24c0-0x24cf]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0x24f0-0x24f7]
pci 0000:00:1f.2: reg 14: [io 0x2808-0x280b]
pci 0000:00:1f.2: reg 18: [io 0x24f8-0x24ff]
pci 0000:00:1f.2: reg 1c: [io 0x280c-0x280f]
pci 0000:00:1f.2: reg 20: [io 0x24d0-0x24df]
pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
pci 0000:00:1f.5: reg 10: [io 0x2000-0x20ff]
pci 0000:00:1f.5: reg 14: [io 0x2400-0x243f]
pci 0000:00:1f.5: reg 18: [mem 0xf0a00400-0xf0a005ff]
pci 0000:00:1f.5: reg 1c: [mem 0xf0a00600-0xf0a006ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:01:00.0: [1002:4150] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:00.0: reg 14: [io 0x1000-0x10ff]
pci 0000:01:00.0: reg 18: [mem 0xf0500000-0xf050ffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:4170] type 0 class 0x000380
pci 0000:01:00.1: reg 10: [mem 0xe0000000-0xefffffff pref]
pci 0000:01:00.1: reg 14: [mem 0xf0510000-0xf051ffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:01.0: bridge window [mem 0xf0500000-0xf07fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xf01fffff pref]
pci 0000:05:02.0: [14e4:1696] type 0 class 0x000200
pci 0000:05:02.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
pci 0000:05:02.0: PME# supported from D3hot D3cold
pci 0000:05:02.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xf0200000-0xf04fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [mem 0x60100000-0xfebfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:06.0: no compatible bridge window for [mem 0xfecf0000-0xfecf0fff]
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000005fff0000 - 000000005fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x60100000-0xfebfffff window]
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x00f0-0x00ff]
pnp 00:01: [irq 13]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [irq 12]
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:06: [io 0x0060]
pnp 00:06: [io 0x0064]
pnp 00:06: [irq 1]
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: [irq 7]
pnp 00:07: [dma 3]
pnp 00:07: [io 0x0378-0x037f]
pnp 00:07: [io 0x0778-0x077d]
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:08: [irq 4]
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:09: [irq 6]
pnp 00:09: [dma 2]
pnp 00:09: [io 0x03f0-0x03f5]
pnp 00:09: [io 0x03f7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:0b: [io 0x0010-0x001f]
pnp 00:0b: [io 0x0050-0x0053]
pnp 00:0b: [io 0x0072-0x0077]
pnp 00:0b: [io 0x0090-0x009f]
pnp 00:0b: [io 0x04d0-0x04d1]
system 00:0b: [io 0x04d0-0x04d1] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x0400-0x041f]
pnp 00:0c: [io 0x0420-0x043f]
pnp 00:0c: [io 0x0440-0x045f]
pnp 00:0c: [io 0x0460-0x047f]
pnp 00:0c: [io 0xf800-0xf81f]
pnp 00:0c: [io 0xf820-0xf83f]
pnp 00:0c: [io 0xf840-0xf85f]
pnp 00:0c: [io 0xf860-0xf87f]
pnp 00:0c: [io 0xfa00-0xfa3f]
pnp 00:0c: [io 0xfc00-0xfc7f]
pnp 00:0c: [io 0xfc80-0xfcff]
pnp 00:0c: [io 0xfe00-0xfe7f]
pnp 00:0c: [io 0xfe80-0xfeff]
pnp 00:0c: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
pnp 00:0c: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
system 00:0c: [io 0x0400-0x041f] has been reserved
system 00:0c: [io 0x0420-0x043f] has been reserved
system 00:0c: [io 0x0440-0x045f] has been reserved
system 00:0c: [io 0x0460-0x047f] has been reserved
system 00:0c: [io 0xfa00-0xfa3f] has been reserved
system 00:0c: [io 0xfc00-0xfc7f] could not be reserved
system 00:0c: [io 0xfc80-0xfcff] has been reserved
system 00:0c: [io 0xfe00-0xfe7f] has been reserved
system 00:0c: [io 0xfe80-0xfeff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x00100000-0x5fffffff]
pnp 00:0d: [mem 0x60000000-0x600fffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0xfec01000-0xffffffff]
pnp 00:0d: [mem 0x000cd000-0x000dffff]
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x00100000-0x5fffffff] could not be reserved
system 00:0d: [mem 0x60000000-0x600fffff] has been reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0xfec01000-0xffffffff] has been reserved
system 00:0d: [mem 0x000cd000-0x000dffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:06.0: BAR 0: assigned [mem 0x60100000-0x60100fff]
pci 0000:00:06.0: BAR 0: set to [mem 0x60100000-0x60100fff] (PCI address [0x60100000-0x60100fff])
pci 0000:00:1f.1: BAR 5: assigned [mem 0x60101000-0x601013ff]
pci 0000:00:1f.1: BAR 5: set to [mem 0x60101000-0x601013ff] (PCI address [0x60101000-0x601013ff])
pci 0000:01:00.0: BAR 6: assigned [mem 0xf0000000-0xf001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:01.0: bridge window [mem 0xf0500000-0xf07fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xf01fffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xf0200000-0xf04fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [mem 0x60100000-0xfebfffff]
pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf07fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xf01fffff pref]
pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf04fffff]
pci_bus 0000:05: resource 4 [mem 0x60100000-0xfebfffff]
pci_bus 0000:05: resource 5 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1334950749.148:1): initialized
Trying to unpack rootfs image as initramfs...
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.16)
msgmni has been set to 1692
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
isapnp: Scanning for PnP cards...
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 865 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x24c0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x24c8 irq 15
ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x24f0 ctl 0x2808 bmdma 0x24d0 irq 18
ata4: SATA max UDMA/133 cmd 0x24f8 ctl 0x280c bmdma 0x24d8 irq 18
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0a00000
ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
ata1.00: 160086528 sectors, multi 16: LBA
ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
ata2.01: ATAPI: ASUS DRW-1608P3S, 1.24, max UDMA/66
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002440
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002460
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002480
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/100
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
ata2.01: configured for UDMA/66
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
isapnp: No Plug & Play device found
scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi 1:0:1:0: CD-ROM ASUS DRW-1608P3S 1.24 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
sr 1:0:1:0: Attached scsi generic sg2 type 5
Freeing initrd memory: 13268k freed
Magic number: 8:638:698
block sr0: hash matches
rtc_cmos 00:03: setting system clock to 2012-04-20 19:39:10 UTC (1334950750)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 696k freed
Write protecting the kernel text: 5332k
Write protecting the kernel read-only data: 2188k
Refined TSC clocksource calibration: 2792.999 MHz.
Switching to clocksource tsc
udevd[85]: starting version 173
hub 1-0:1.0: over-current condition on port 7
FDC 0 is a post-1991 82077
tg3.c:v3.119 (May 18, 2011)
tg3 0000:05:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
usb 2-1: new low speed USB device number 2 using uhci_hcd
tg3 0000:05:02.0: eth0: Tigon3 [partno(BCM95782A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:0d:9d:4f:31:8d
tg3 0000:05:02.0: eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0])
tg3 0000:05:02.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:05:02.0: eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
generic-usb 0003:0458:0056.0001: input,hidraw0: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:1d.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (loop0): mounted filesystem with ordered data mode
usb 2-2: new full speed USB device number 3 using uhci_hcd
udevd[296]: starting version 173
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ppdev: user-space parallel port driver
Linux video capture interface: v2.00
[drm] Initialized drm 1.1.0 20060810
gspca: v2.13.0 registered
input: pac207 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/input/input4
usbcore: registered new interface driver pac207
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[drm] initializing kernel modesetting (RV350 0x1002:0x4150 0x148C:0x2064).
[drm] register mmio base: 0xF0500000
[drm] register mmio size: 65536
agpgart-intel 0000:00:00.0: AGP 3.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
radeon 0000:01:00.0: putting AGP V3 device into 8x mode
radeon 0000:01:00.0: GTT: 64M 0xF4000000 - 0xF7FFFFFF
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 256M 0x00000000D0000000 - 0x00000000DFFFFFFF (256M used)
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 440324 kiB.
[TTM] Zone highmem: Available graphics memory: 772072 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 64M of GTT memory ready.
[drm] radeon: 1 quad pipes, 1 Z pipes initialized.
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
radeon 0000:01:00.0: WB disabled
[drm] Loading R300 Microcode
[drm] radeon: ring at 0x00000000F4001000
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] DFP1: INTERNAL_TMDS1
[drm] Connector 2:
[drm] S-video
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
intel8x0_measure_ac97_clock: measured 53178 usecs (2562 samples)
intel8x0: clocking to 48000
[drm] Radeon display connector VGA-1: Found valid EDID
[drm] Radeon display connector DVI-I-1: No monitor connected or invalid EDID
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
type=1400 audit(1334943557.691:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=557 comm="apparmor_parser"
type=1400 audit(1334943557.691:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=557 comm="apparmor_parser"
type=1400 audit(1334943557.691:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser"
type=1400 audit(1334943557.695:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=587 comm="apparmor_parser"
type=1400 audit(1334943557.695:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=587 comm="apparmor_parser"
type=1400 audit(1334943557.695:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=587 comm="apparmor_parser"
Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k
EXT3-fs (loop0): using internal journal
lp0: using parport0 (interrupt-driven).
type=1400 audit(1334943563.919:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=756 comm="apparmor_parser"
ADDRCONF(NETDEV_UP): eth0: link is not ready
type=1400 audit(1334943565.511:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=765 comm="apparmor_parser"
type=1400 audit(1334943565.511:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=765 comm="apparmor_parser"
type=1400 audit(1334943565.511:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=765 comm="apparmor_parser"
type=1400 audit(1334943565.827:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=764 comm="apparmor_parser"
type=1400 audit(1334943565.827:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=764 comm="apparmor_parser"
tg3 0000:05:02.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:05:02.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
type=1400 audit(1334943575.103:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=785 comm="apparmor_parser"
type=1400 audit(1334943575.107:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=785 comm="apparmor_parser"
type=1400 audit(1334943575.111:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=785 comm="apparmor_parser"
type=1400 audit(1334943575.695:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=846 comm="apparmor_parser"
type=1400 audit(1334943575.699:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=846 comm="apparmor_parser"
type=1400 audit(1334943575.703:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=847 comm="apparmor_parser"
type=1400 audit(1334943575.703:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=847 comm="apparmor_parser"
type=1400 audit(1334943575.991:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=848 comm="apparmor_parser"
init: failsafe main process (706) killed by TERM signal
init: apport pre-start process (878) terminated with status 1
init: alsa-restore main process (884) terminated with status 99
init: apport post-stop process (903) terminated with status 1
eth0: no IPv6 routers present
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
init: plymouth-upstart-bridge main process (747) killed by TERM signal
init: plymouth-stop pre-start process (1130) terminated with status 1