dmesg - complexCPUdefault
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-17-generic (buildd@roseapple) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #30-Ubuntu SMP Thu Mar 8 17:34:21 UTC 2012 (Ubuntu 3.0.0-17.30-generic 3.0.22)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bffc0000 - 00000000bfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68C-S UCC, BIOS P1.60 09/19/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 365ea000 - 372ed000
[ 0.000000] ACPI: RSDP 000fb580 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT bffb0000 0003C (v01 A_M_I OEMRSDT 09001119 MSFT 00000097)
[ 0.000000] ACPI: FACP bffb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT bffb0460 0495C (v01 AS361 AS361151 00000151 INTL 20051117)
[ 0.000000] ACPI: FACS bffc0000 00040
[ 0.000000] ACPI: APIC bffb0390 00090 (v01 A_M_I OEMAPIC 09001119 MSFT 00000097)
[ 0.000000] ACPI: MCFG bffb0420 0003C (v01 A_M_I OEMMCFG 09001119 MSFT 00000097)
[ 0.000000] ACPI: OEMB bffc0040 00061 (v01 A_M_I AMI_OEM 09001119 MSFT 00000097)
[ 0.000000] ACPI: SRAT bffb4dc0 000C0 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: AAFT bffb4e80 00027 (v01 A_M_I OEMAAFT 09001119 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2183MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bffb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffb0
[ 0.000000] On node 0 totalpages: 786239
[ 0.000000] free_area_init_node: node 0, pgdat c17b54c0, node_mem_map f4dea200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4368 pages used for memmap
[ 0.000000] HighMem zone: 554658 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
[ 0.000000] PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f4800000 s26240 r0 d22912 u524288
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780095
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 12581376 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bffb0)
[ 0.000000] Memory: 3084052k/3145408k available (5340k kernel code, 60904k reserved, 2595k data, 696k init, 2236104k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc17c1000 - 0xc186f000 ( 696 kB)
[ 0.000000] .data : 0xc15371c4 - 0xc17c0140 (2595 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15371c4 (5340 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:728 16
[ 0.000000] CPU 0 irqstacks, hard=f380a000 soft=f380c000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2310.772 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4621.54 BogoMIPS (lpj=9243088)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004038] Security Framework initialized
[ 0.004063] AppArmor: AppArmor initialized
[ 0.004066] Yama: becoming mindful.
[ 0.004131] Mount-cache hash table entries: 512
[ 0.004286] Initializing cgroup subsys cpuacct
[ 0.004293] Initializing cgroup subsys memory
[ 0.004303] Initializing cgroup subsys devices
[ 0.004306] Initializing cgroup subsys freezer
[ 0.004309] Initializing cgroup subsys net_cls
[ 0.004312] Initializing cgroup subsys blkio
[ 0.004320] Initializing cgroup subsys perf_event
[ 0.004350] CPU: Physical Processor ID: 0
[ 0.004353] CPU: Processor Core ID: 0
[ 0.004356] mce: CPU supports 6 MCE banks
[ 0.008071] ACPI: Core revision 20110413
[ 0.012015] ftrace: allocating 24903 entries in 49 pages
[ 0.016076] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020526] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.060342] CPU0: AMD Phenom(tm) 9600 Quad-Core Processor stepping 02
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] CPU 1 irqstacks, hard=f38b2000 soft=f38b4000
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.152085] CPU 2 irqstacks, hard=f38de000 soft=f38e0000
[ 0.152087] #2
[ 0.152089] smpboot cpu 2: start_ip = 9b000
[ 0.008000] Initializing CPU#2
[ 0.244079] CPU 3 irqstacks, hard=f38ea000 soft=f38ec000
[ 0.244081] #3
[ 0.244082] smpboot cpu 3: start_ip = 9b000
[ 0.008000] Initializing CPU#3
[ 0.336027] Brought up 4 CPUs
[ 0.336029] Total of 4 processors activated (18487.13 BogoMIPS).
[ 0.337592] devtmpfs: initialized
[ 0.337592] PM: Registering ACPI NVS region at bffc0000 (196608 bytes)
[ 0.338034] print_constraints: dummy:
[ 0.340059] Time: 11:37:06 Date: 04/18/12
[ 0.340099] NET: Registered protocol family 16
[ 0.340209] EISA bus registered
[ 0.340214] node 0 link 0: io port [1000, ffffff]
[ 0.340218] TOM: 00000000c0000000 aka 3072M
[ 0.340221] Fam 10h mmconf [mem 0xfc000000-0xfdffffff]
[ 0.340224] node 0 link 0: mmio [fc000000, fdffffff] ==> none
[ 0.340228] node 0 link 0: mmio [c0000000, fbffffff]
[ 0.340230] node 0 link 0: mmio [fe000000, fe0bffff]
[ 0.340233] node 0 link 0: mmio [a0000, bffff]
[ 0.340237] bus: [00, 07] on node 0 link 0
[ 0.340239] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.340241] bus: 00 index 1 [mem 0xc0000000-0xfbffffff]
[ 0.340243] bus: 00 index 2 [mem 0xfe000000-0xffffffff]
[ 0.340245] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
[ 0.340253] Extended Config Space enabled on 1 nodes
[ 0.340265] ACPI: bus type pci registered
[ 0.340111] Trying to unpack rootfs image as initramfs...
[ 0.340327] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[ 0.340330] PCI: not using MMCONFIG
[ 0.341299] PCI: Using configuration type 1 for base access
[ 0.341300] PCI: Using configuration type 1 for extended access
[ 0.342062] bio: create slab at 0
[ 0.342062] ACPI: EC: Look up EC in DSDT
[ 0.344202] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.345750] ACPI: Interpreter enabled
[ 0.345756] ACPI: (supports S0 S1 S4 S5)
[ 0.345775] ACPI: Using IOAPIC for interrupt routing
[ 0.345793] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
[ 0.346673] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
[ 0.346675] PCI: Using MMCONFIG for extended config space
[ 0.351720] ACPI: No dock devices found.
[ 0.351722] HEST: Table not found.
[ 0.351725] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.351785] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.351909] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.351912] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.351915] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.351917] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.351920] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xff37ffff]
[ 0.351946] pci 0000:00:00.0: [10de:03e2] type 0 class 0x000500
[ 0.352126] pci 0000:00:01.0: [10de:03e1] type 0 class 0x000601
[ 0.352134] pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff]
[ 0.352169] pci 0000:00:01.1: [10de:03eb] type 0 class 0x000c05
[ 0.352180] pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc3f]
[ 0.352196] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f]
[ 0.352201] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f]
[ 0.352230] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.352236] pci 0000:00:01.1: PME# disabled
[ 0.352246] pci 0000:00:01.2: [10de:03f5] type 0 class 0x000500
[ 0.352287] pci 0000:00:02.0: [10de:03f1] type 0 class 0x000c03
[ 0.352297] pci 0000:00:02.0: reg 10: [mem 0xfbcff000-0xfbcfffff]
[ 0.352331] pci 0000:00:02.0: supports D1 D2
[ 0.352333] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.352336] pci 0000:00:02.0: PME# disabled
[ 0.352347] pci 0000:00:02.1: [10de:03f2] type 0 class 0x000c03
[ 0.352358] pci 0000:00:02.1: reg 10: [mem 0xfbcfec00-0xfbcfecff]
[ 0.352399] pci 0000:00:02.1: supports D1 D2
[ 0.352401] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.352405] pci 0000:00:02.1: PME# disabled
[ 0.352422] pci 0000:00:04.0: [10de:03f3] type 1 class 0x000604
[ 0.352463] pci 0000:00:05.0: [10de:03f0] type 0 class 0x000403
[ 0.352474] pci 0000:00:05.0: reg 10: [mem 0xfbcf8000-0xfbcfbfff]
[ 0.352516] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.352519] pci 0000:00:05.0: PME# disabled
[ 0.352537] pci 0000:00:06.0: [10de:03ec] type 0 class 0x000101
[ 0.352559] pci 0000:00:06.0: reg 20: [io 0xffa0-0xffaf]
[ 0.352589] pci 0000:00:07.0: [10de:03ef] type 0 class 0x000680
[ 0.352599] pci 0000:00:07.0: reg 10: [mem 0xfbcfd000-0xfbcfdfff]
[ 0.352604] pci 0000:00:07.0: reg 14: [io 0xd480-0xd487]
[ 0.352639] pci 0000:00:07.0: supports D1 D2
[ 0.352641] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.352645] pci 0000:00:07.0: PME# disabled
[ 0.352657] pci 0000:00:08.0: [10de:03f6] type 0 class 0x000101
[ 0.352665] pci 0000:00:08.0: reg 10: [io 0xd400-0xd407]
[ 0.352670] pci 0000:00:08.0: reg 14: [io 0xd080-0xd083]
[ 0.352674] pci 0000:00:08.0: reg 18: [io 0xd000-0xd007]
[ 0.352679] pci 0000:00:08.0: reg 1c: [io 0xcc00-0xcc03]
[ 0.352683] pci 0000:00:08.0: reg 20: [io 0xc880-0xc88f]
[ 0.352688] pci 0000:00:08.0: reg 24: [mem 0xfbcfc000-0xfbcfcfff]
[ 0.352719] pci 0000:00:08.1: [10de:03f6] type 0 class 0x000101
[ 0.352727] pci 0000:00:08.1: reg 10: [io 0xc800-0xc807]
[ 0.352731] pci 0000:00:08.1: reg 14: [io 0xc480-0xc483]
[ 0.352736] pci 0000:00:08.1: reg 18: [io 0xc400-0xc407]
[ 0.352741] pci 0000:00:08.1: reg 1c: [io 0xc080-0xc083]
[ 0.352745] pci 0000:00:08.1: reg 20: [io 0xc000-0xc00f]
[ 0.352750] pci 0000:00:08.1: reg 24: [mem 0xfbcf7000-0xfbcf7fff]
[ 0.352784] pci 0000:00:09.0: [10de:03e8] type 1 class 0x000604
[ 0.352813] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.352816] pci 0000:00:09.0: PME# disabled
[ 0.352830] pci 0000:00:0b.0: [10de:03e9] type 1 class 0x000604
[ 0.352858] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.352860] pci 0000:00:0b.0: PME# disabled
[ 0.352873] pci 0000:00:0c.0: [10de:03e9] type 1 class 0x000604
[ 0.352900] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.352903] pci 0000:00:0c.0: PME# disabled
[ 0.352922] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.352940] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.352955] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.352970] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.352988] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.353050] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.353054] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.353059] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.353062] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.353065] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.353068] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.353070] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.353073] pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.353076] pci 0000:00:04.0: bridge window [mem 0xc0000000-0xff37ffff] (subtractive decode)
[ 0.353103] pci 0000:02:00.0: [1002:5b63] type 0 class 0x000300
[ 0.353113] pci 0000:02:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.353120] pci 0000:02:00.0: reg 14: [io 0xe000-0xe0ff]
[ 0.353126] pci 0000:02:00.0: reg 18: [mem 0xfbdf0000-0xfbdfffff]
[ 0.353145] pci 0000:02:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 0.353169] pci 0000:02:00.0: supports D1 D2
[ 0.353184] pci 0000:02:00.1: [1002:5b73] type 0 class 0x000380
[ 0.353193] pci 0000:02:00.1: reg 10: [mem 0xfbde0000-0xfbdeffff]
[ 0.353237] pci 0000:02:00.1: supports D1 D2
[ 0.353248] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.353257] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.353260] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.353263] pci 0000:00:09.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.353267] pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.353299] pci 0000:03:00.0: [14f1:8852] type 0 class 0x000400
[ 0.353320] pci 0000:03:00.0: reg 10: [mem 0xfbe00000-0xfbffffff 64bit]
[ 0.353421] pci 0000:03:00.0: supports D1 D2
[ 0.353423] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.353428] pci 0000:03:00.0: PME# disabled
[ 0.353445] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.353453] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.353456] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.353459] pci 0000:00:0b.0: bridge window [mem 0xfbe00000-0xfbffffff]
[ 0.353463] pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.353484] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.353487] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.353490] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.353494] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.353503] pci_bus 0000:00: on NUMA node 0
[ 0.353506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.353635] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.353688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.353721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.353754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.353784] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.353787] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.353789] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.364896] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.364969] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.365039] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.365108] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.365177] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.365245] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *11
[ 0.365313] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.365382] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[ 0.365451] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[ 0.365519] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.365588] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 0.365657] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.365726] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[ 0.365795] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.365864] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.365933] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.366005] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 0.366074] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[ 0.366200] ACPI Exception: AE_AML_INVALID_RESOURCE_TYPE, Evaluating _CRS (20110413/pci_link-282)
[ 0.366204] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.366302] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.366306] vgaarb: loaded
[ 0.366307] vgaarb: bridge control possible 0000:02:00.0
[ 0.366518] SCSI subsystem initialized
[ 0.366539] libata version 3.00 loaded.
[ 0.366539] usbcore: registered new interface driver usbfs
[ 0.366539] usbcore: registered new interface driver hub
[ 0.366539] usbcore: registered new device driver usb
[ 0.366539] PCI: Using ACPI for IRQ routing
[ 0.366539] PCI: pci_cache_line_size set to 64 bytes
[ 0.366539] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.366539] reserve RAM buffer: 00000000bffb0000 - 00000000bfffffff
[ 0.366539] NetLabel: Initializing
[ 0.366539] NetLabel: domain hash size = 128
[ 0.366539] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.366539] NetLabel: unlabeled traffic allowed by default
[ 0.373899] AppArmor: AppArmor Filesystem Enabled
[ 0.373937] pnp: PnP ACPI init
[ 0.373956] ACPI: bus type pnp registered
[ 0.374071] pnp 00:00: [bus 00-ff]
[ 0.374074] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.374076] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.374079] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.374081] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.374083] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.374085] pnp 00:00: [mem 0xc0000000-0xff37ffff window]
[ 0.374154] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.374171] pnp 00:01: [dma 4]
[ 0.374172] pnp 00:01: [io 0x0000-0x000f]
[ 0.374174] pnp 00:01: [io 0x0081-0x0083]
[ 0.374176] pnp 00:01: [io 0x0087]
[ 0.374178] pnp 00:01: [io 0x0089-0x008b]
[ 0.374180] pnp 00:01: [io 0x008f]
[ 0.374181] pnp 00:01: [io 0x00c0-0x00df]
[ 0.374204] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.374214] pnp 00:02: [io 0x0070-0x0071]
[ 0.374230] pnp 00:02: [irq 8]
[ 0.374252] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.374259] pnp 00:03: [io 0x0061]
[ 0.374281] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.374289] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.374297] pnp 00:04: [irq 13]
[ 0.374321] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.374745] pnp 00:05: [io 0x0378-0x037f]
[ 0.374747] pnp 00:05: [io 0x0778-0x077f]
[ 0.374755] pnp 00:05: [irq 7]
[ 0.374757] pnp 00:05: [dma 3]
[ 0.374883] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.375176] pnp 00:06: [mem 0x000d0000-0x000d3fff window]
[ 0.375179] pnp 00:06: [mem 0x000d4000-0x000d7fff window]
[ 0.375181] pnp 00:06: [mem 0x000de000-0x000dffff window]
[ 0.375183] pnp 00:06: [io 0x0010-0x001f]
[ 0.375185] pnp 00:06: [io 0x0022-0x003f]
[ 0.375187] pnp 00:06: [io 0x0044-0x005f]
[ 0.375189] pnp 00:06: [io 0x0062-0x0063]
[ 0.375190] pnp 00:06: [io 0x0065-0x006f]
[ 0.375192] pnp 00:06: [io 0x0072-0x007f]
[ 0.375194] pnp 00:06: [io 0x0080]
[ 0.375196] pnp 00:06: [io 0x0084-0x0086]
[ 0.375198] pnp 00:06: [io 0x0088]
[ 0.375200] pnp 00:06: [io 0x008c-0x008e]
[ 0.375201] pnp 00:06: [io 0x0090-0x009f]
[ 0.375203] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.375205] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.375207] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.375209] pnp 00:06: [io 0x0500-0x057f]
[ 0.375210] pnp 00:06: [io 0x0580-0x05ff]
[ 0.375212] pnp 00:06: [io 0x0800-0x087f]
[ 0.375214] pnp 00:06: [io 0x0880-0x08ff]
[ 0.375216] pnp 00:06: [io 0x0d00-0x0d7f]
[ 0.375218] pnp 00:06: [io 0x0d80-0x0dff]
[ 0.375220] pnp 00:06: [io 0x1100-0x117f]
[ 0.375221] pnp 00:06: [io 0x1180-0x11ff]
[ 0.375223] pnp 00:06: [mem 0xfec80000-0xfd93ffff]
[ 0.375226] pnp 00:06: [mem 0xfefe0000-0xfefe01ff]
[ 0.375227] pnp 00:06: [mem 0xfefe1000-0xfefe1fff]
[ 0.375229] pnp 00:06: [mem 0xfee01000-0xfeefffff]
[ 0.375315] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.375318] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.375321] system 00:06: [io 0x0580-0x05ff] has been reserved
[ 0.375323] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.375326] system 00:06: [io 0x0880-0x08ff] has been reserved
[ 0.375328] system 00:06: [io 0x0d00-0x0d7f] has been reserved
[ 0.375330] system 00:06: [io 0x0d80-0x0dff] has been reserved
[ 0.375333] system 00:06: [io 0x1100-0x117f] has been reserved
[ 0.375335] system 00:06: [io 0x1180-0x11ff] has been reserved
[ 0.375338] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.375341] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.375344] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.375347] system 00:06: [mem 0xfec80000-0xfd93ffff] could not be reserved
[ 0.375350] system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.375352] system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.375355] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.375359] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.375538] pnp 00:07: [io 0x0060]
[ 0.375540] pnp 00:07: [io 0x0064]
[ 0.375542] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.375544] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.375586] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.375589] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.375592] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.375830] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.375838] pnp 00:08: [irq 4]
[ 0.375840] pnp 00:08: [dma 0 disabled]
[ 0.375898] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.375971] pnp 00:09: [io 0x0000-0xffffffff disabled]
[ 0.375974] pnp 00:09: [io 0x0280-0x028f]
[ 0.375976] pnp 00:09: [io 0x0290-0x029f]
[ 0.376018] system 00:09: [io 0x0280-0x028f] has been reserved
[ 0.376027] system 00:09: [io 0x0290-0x029f] has been reserved
[ 0.376030] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.376070] pnp 00:0a: [mem 0xfc000000-0xfdffffff]
[ 0.376109] system 00:0a: [mem 0xfc000000-0xfdffffff] has been reserved
[ 0.376112] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.376313] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.376315] pnp 00:0b: [mem 0x00000000-0xffffffff disabled]
[ 0.376317] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.376319] pnp 00:0b: [mem 0x00100000-0xbfffffff]
[ 0.376321] pnp 00:0b: [mem 0xff380000-0xffffffff]
[ 0.376340] pnp 00:0b: [Firmware Bug]: [mem 0x00000000-0xffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xfc000000-0xfdffffff]; adding more reservations
[ 0.376379] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.376382] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.376385] system 00:0b: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.376388] system 00:0b: [mem 0xff380000-0xffffffff] could not be reserved
[ 0.376391] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.376631] pnp: PnP ACPI: found 12 devices
[ 0.376633] ACPI: ACPI bus type pnp unregistered
[ 0.376636] PnPBIOS: Disabled by ACPI PNP
[ 0.412645] Switching to clocksource acpi_pm
[ 0.412689] PCI: max bus depth: 1 pci_try_num: 2
[ 0.412708] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.412710] pci 0000:00:04.0: bridge window [io disabled]
[ 0.412713] pci 0000:00:04.0: bridge window [mem disabled]
[ 0.412716] pci 0000:00:04.0: bridge window [mem pref disabled]
[ 0.412721] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.412723] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.412726] pci 0000:00:09.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.412730] pci 0000:00:09.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.412734] pci 0000:00:0b.0: PCI bridge to [bus 03-03]
[ 0.412735] pci 0000:00:0b.0: bridge window [io disabled]
[ 0.412738] pci 0000:00:0b.0: bridge window [mem 0xfbe00000-0xfbffffff]
[ 0.412741] pci 0000:00:0b.0: bridge window [mem pref disabled]
[ 0.412744] pci 0000:00:0c.0: PCI bridge to [bus 04-04]
[ 0.412746] pci 0000:00:0c.0: bridge window [io disabled]
[ 0.412749] pci 0000:00:0c.0: bridge window [mem disabled]
[ 0.412751] pci 0000:00:0c.0: bridge window [mem pref disabled]
[ 0.412762] pci 0000:00:04.0: setting latency timer to 64
[ 0.412767] pci 0000:00:09.0: setting latency timer to 64
[ 0.412771] pci 0000:00:0b.0: setting latency timer to 64
[ 0.412775] pci 0000:00:0c.0: setting latency timer to 64
[ 0.412778] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.412781] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.412783] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.412786] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.412788] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xff37ffff]
[ 0.412791] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.412793] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.412795] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.412798] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.412800] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xff37ffff]
[ 0.412803] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.412805] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.412807] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.412810] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbffffff]
[ 0.412855] NET: Registered protocol family 2
[ 0.412933] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.413189] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.413912] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.414247] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.414249] TCP reno registered
[ 0.414253] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.414264] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.414361] NET: Registered protocol family 1
[ 0.435818] Switched to NOHz mode on CPU #1
[ 0.435823] Switched to NOHz mode on CPU #0
[ 0.435830] Switched to NOHz mode on CPU #2
[ 0.435840] Switched to NOHz mode on CPU #3
[ 0.488108] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.488158] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.488216] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.488272] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.488328] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.488389] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.488454] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.488523] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.488535] pci 0000:02:00.0: Boot video device
[ 0.488543] PCI: CLS 64 bytes, default 64
[ 0.489095] audit: initializing netlink socket (disabled)
[ 0.489114] type=2000 audit(1334749025.484:1): initialized
[ 0.515197] highmem bounce pool size: 64 pages
[ 0.515204] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.531062] VFS: Disk quotas dquot_6.5.2
[ 0.531143] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.531857] fuse init (API version 7.16)
[ 0.531949] msgmni has been set to 1656
[ 0.532565] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.532614] io scheduler noop registered
[ 0.532616] io scheduler deadline registered
[ 0.532630] io scheduler cfq registered (default)
[ 0.532752] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.532781] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.532823] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.532843] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.532876] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.532896] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.532951] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.532976] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.533115] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.533121] ACPI: Power Button [PWRB]
[ 0.533164] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.533167] ACPI: Power Button [PWRF]
[ 0.533195] ACPI: acpi_idle registered with cpuidle
[ 0.535169] ERST: Table is not found!
[ 0.535269] isapnp: Scanning for PnP cards...
[ 0.555595] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.675735] Freeing initrd memory: 13324k freed
[ 0.888749] isapnp: No Plug & Play device found
[ 0.914183] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.914442] Linux agpgart interface v0.103
[ 0.915877] brd: module loaded
[ 0.916498] loop: module loaded
[ 0.916721] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.916904] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 0.916924] pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 0.916947] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 0.916953] pata_acpi 0000:00:08.0: PCI INT A disabled
[ 0.917063] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 0.917074] pata_acpi 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 0.917090] pata_acpi 0000:00:08.1: setting latency timer to 64
[ 0.917095] pata_acpi 0000:00:08.1: PCI INT B disabled
[ 0.917395] Fixed MDIO Bus: probed
[ 0.917418] PPP generic driver version 2.4.2
[ 0.917469] tun: Universal TUN/TAP device driver, 1.6
[ 0.917471] tun: (C) 1999-2004 Max Krasnyansky
[ 0.917556] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.917669] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[ 0.917680] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
[ 0.917695] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.917699] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.917732] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.917753] ehci_hcd 0000:00:02.1: debug port 1
[ 0.917760] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.917784] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfbcfec00
[ 0.928042] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.928166] hub 1-0:1.0: USB hub found
[ 0.928171] hub 1-0:1.0: 10 ports detected
[ 0.928252] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.928368] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 0.928380] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 0.928389] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.928392] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.928423] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.928447] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfbcff000
[ 0.986115] hub 2-0:1.0: USB hub found
[ 0.986121] hub 2-0:1.0: 10 ports detected
[ 0.986190] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.986272] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.989217] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.989233] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.989418] mousedev: PS/2 mouse device common for all mice
[ 0.989550] rtc_cmos 00:02: RTC can wake from S4
[ 0.989677] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.989711] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.989832] device-mapper: uevent: version 1.0.3
[ 0.989908] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 0.989943] EISA: Probing bus 0 at eisa.0
[ 0.989946] EISA: Cannot allocate resource for mainboard
[ 0.989948] Cannot allocate resource for EISA slot 1
[ 0.989949] Cannot allocate resource for EISA slot 2
[ 0.989951] Cannot allocate resource for EISA slot 3
[ 0.989953] Cannot allocate resource for EISA slot 4
[ 0.989954] Cannot allocate resource for EISA slot 5
[ 0.989956] Cannot allocate resource for EISA slot 6
[ 0.989957] Cannot allocate resource for EISA slot 7
[ 0.989959] Cannot allocate resource for EISA slot 8
[ 0.989960] EISA: Detected 0 cards.
[ 0.989972] cpufreq-nforce2: No nForce2 chipset.
[ 0.989975] cpuidle: using governor ladder
[ 0.989976] cpuidle: using governor menu
[ 0.989978] EFI Variables Facility v0.08 2004-May-17
[ 0.990274] TCP cubic registered
[ 0.990418] NET: Registered protocol family 10
[ 0.990996] NET: Registered protocol family 17
[ 0.991015] Registering the dns_resolver key type
[ 0.991042] Using IPI No-Shortcut mode
[ 0.991126] PM: Hibernation image not present or could not be loaded.
[ 0.991139] registered taskstats version 1
[ 1.006635] Magic number: 8:87:631
[ 1.006750] rtc_cmos 00:02: setting system clock to 2012-04-18 11:37:06 UTC (1334749026)
[ 1.006773] powernow-k8: Found 1 AMD Phenom(tm) 9600 Quad-Core Processor (4 cpu cores) (version 2.20.00)
[ 1.006785] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 1.006786] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 1.006803] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.006805] EDD information not available.
[ 1.006952] Freeing unused kernel memory: 696k freed
[ 1.007278] Write protecting the kernel text: 5344k
[ 1.007343] Write protecting the kernel read-only data: 2192k
[ 1.032094] udevd[88]: starting version 173
[ 1.065739] sata_nv 0000:00:08.0: version 3.5
[ 1.065763] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.065824] sata_nv 0000:00:08.0: setting latency timer to 64
[ 1.067011] scsi0 : sata_nv
[ 1.068765] scsi1 : sata_nv
[ 1.069124] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 23
[ 1.069128] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 23
[ 1.069182] sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 1.069238] sata_nv 0000:00:08.1: setting latency timer to 64
[ 1.070542] scsi2 : sata_nv
[ 1.071724] scsi3 : sata_nv
[ 1.071909] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 22
[ 1.071912] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 22
[ 1.071973] pata_amd 0000:00:06.0: version 0.4.1
[ 1.072148] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.073919] scsi4 : pata_amd
[ 1.074077] scsi5 : pata_amd
[ 1.074844] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.074847] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.074907] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.075049] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 1.075055] forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 1.075061] forcedeth 0000:00:07.0: setting latency timer to 64
[ 1.308041] usb 1-2: new high speed USB device number 3 using ehci_hcd
[ 1.394303] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.488038] Refined TSC clocksource calibration: 2310.647 MHz.
[ 1.488044] Switching to clocksource tsc
[ 1.536039] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.556809] ata1.00: ATA-7: WDC WD5000AAKS-22TMA0, 12.01C01, max UDMA/133
[ 1.556813] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.573082] ata1.00: configured for UDMA/133
[ 1.573250] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 12.0 PQ: 0 ANSI: 5
[ 1.573463] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.573506] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.573648] sd 0:0:0:0: [sda] Write Protect is off
[ 1.573651] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.573685] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.596892] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:22:d5:bd:6c
[ 1.596897] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 1.603254] sda: sda1 sda2 < sda5 >
[ 1.603637] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.764028] usb 1-9: new high speed USB device number 5 using ehci_hcd
[ 1.873266] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.040049] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.048147] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653N, 0609, max UDMA/33
[ 2.064133] ata2.00: configured for UDMA/33
[ 2.065331] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653N 0609 PQ: 0 ANSI: 5
[ 2.067927] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.067931] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.068052] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.068108] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.216019] usb 2-1: new low speed USB device number 2 using ohci_hcd
[ 2.390280] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.390345] ata6: port disabled. ignoring.
[ 2.732025] usb 2-4: new low speed USB device number 3 using ohci_hcd
[ 11.241606] udevd[298]: starting version 173
[ 11.276932] lp: driver loaded but no devices found
[ 11.277948] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 11.277975] i2c i2c-1: nForce2 SMBus adapter at 0x700
[ 11.331236] parport_pc 00:05: reported by Plug and Play ACPI
[ 11.331294] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 11.349403] Linux video capture interface: v2.00
[ 11.354122] Adding 3142652k swap on /dev/sda5. Priority:-1 extents:1 across:3142652k
[ 11.356541] udevd[311]: renamed network interface eth0 to eth1
[ 11.365986] [drm] Initialized drm 1.1.0 20060810
[ 11.367762] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 11.378616] altera_stapl: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.385233] cx23885 driver version 0.0.2 loaded
[ 11.385378] IR NEC protocol handler initialized
[ 11.387809] type=1400 audit(1334749036.876:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=438 comm="apparmor_parser"
[ 11.388270] type=1400 audit(1334749036.880:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=438 comm="apparmor_parser"
[ 11.388518] type=1400 audit(1334749036.880:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=438 comm="apparmor_parser"
[ 11.390070] IR RC5(x) protocol handler initialized
[ 11.392518] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[ 11.392547] cx23885 0000:03:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
[ 11.392755] CORE cx23885[0]: subsystem: 0070:71d3, board: Hauppauge WinTV-HVR1200 [card=7,autodetected]
[ 11.394534] IR RC6 protocol handler initialized
[ 11.404244] [drm] radeon defaulting to kernel modesetting.
[ 11.404249] [drm] radeon kernel modesetting enabled.
[ 11.404500] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18
[ 11.404527] radeon 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 18 (level, low) -> IRQ 18
[ 11.404534] radeon 0000:02:00.0: setting latency timer to 64
[ 11.404753] [drm] initializing kernel modesetting (RV380 0x1002:0x5B63 0x1458:0x3000).
[ 11.404777] [drm] register mmio base: 0xFBDF0000
[ 11.404779] [drm] register mmio size: 65536
[ 11.406288] [drm] Generation 2 PCI interface, using max accessible memory
[ 11.406293] radeon 0000:02:00.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (128M used)
[ 11.406297] radeon 0000:02:00.0: GTT: 512M 0x00000000D0000000 - 0x00000000EFFFFFFF
[ 11.406306] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 11.406308] [drm] Driver supports precise vblank timestamp query.
[ 11.406337] radeon 0000:02:00.0: irq 43 for MSI/MSI-X
[ 11.406342] radeon 0000:02:00.0: radeon: using MSI.
[ 11.406364] [drm] radeon: irq initialized.
[ 11.534358] lp0: using parport0 (interrupt-driven).
[ 11.536618] [drm] Detected VRAM RAM=128M, BAR=128M
[ 11.536623] [drm] RAM width 64bits DDR
[ 11.538387] IR JVC protocol handler initialized
[ 11.541402] [TTM] Zone kernel: Available graphics memory: 430984 kiB.
[ 11.541406] [TTM] Zone highmem: Available graphics memory: 1549036 kiB.
[ 11.541409] [TTM] Initializing pool allocator.
[ 11.541438] [drm] radeon: 128M of VRAM memory ready
[ 11.541440] [drm] radeon: 512M of GTT memory ready.
[ 11.541461] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 11.542101] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 11.543213] [drm] PCIE GART of 512M enabled (table at 0xF0040000).
[ 11.543241] radeon 0000:02:00.0: WB enabled
[ 11.543314] [drm] Loading R300 Microcode
[ 11.550501] cfg80211: Calling CRDA to update world regulatory domain
[ 11.554472] IR Sony protocol handler initialized
[ 11.560254] tveeprom 2-0050: Hauppauge model 71949, rev H2E9, serial# 3484660
[ 11.560260] tveeprom 2-0050: MAC address is 00:0d:fe:35:2b:f4
[ 11.560263] tveeprom 2-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
[ 11.560267] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 11.560270] tveeprom 2-0050: audio processor is CX23885 (idx 39)
[ 11.560272] tveeprom 2-0050: decoder processor is CX23885 (idx 33)
[ 11.560274] tveeprom 2-0050: has no radio
[ 11.560276] cx23885[0]: hauppauge eeprom: model=71949
[ 11.560281] cx23885_dvb_register() allocating 1 frontend(s)
[ 11.561131] cx23885[0]: cx23885 based dvb card
[ 11.563394] lirc_dev: IR Remote Control driver registered, major 251
[ 11.563702] IR LIRC bridge handler initialized
[ 11.569452] cx23885[0]: frontend initialization failed
[ 11.569462] cx23885_dvb_register() dvb_register failed err = -22
[ 11.569466] cx23885_dev_setup() Failed to register dvb on VID_C
[ 11.569471] cx23885_dev_checkrevision() Hardware revision = 0xb0
[ 11.569481] cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfbe00000
[ 11.569492] cx23885 0000:03:00.0: setting latency timer to 64
[ 11.632107] usbcore: registered new interface driver uas
[ 11.643834] Initializing USB Mass Storage driver...
[ 11.647326] scsi6 : usb-storage 1-9:1.0
[ 11.648437] usbcore: registered new interface driver usb-storage
[ 11.648441] USB Mass Storage support registered.
[ 11.656662] w83627ehf: Found W83627DHG-P chip at 0x290
[ 11.668090] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 11.668099] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 11.668103] hda_intel: Disabling MSI
[ 11.668134] HDA Intel 0000:00:05.0: setting latency timer to 64
[ 11.675913] ppdev: user-space parallel port driver
[ 11.700243] cfg80211: World regulatory domain updated:
[ 11.700248] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.700251] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.700254] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.700256] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.700259] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.700261] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.705263] input: USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
[ 11.705402] generic-usb 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:02.0-1/input0
[ 11.712309] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input3
[ 11.712411] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.0-4/input0
[ 11.726134] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input4
[ 11.726254] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.0-4/input1
[ 11.726278] usbcore: registered new interface driver usbhid
[ 11.726280] usbhid: USB HID core driver
[ 11.727807] [drm] radeon: ring at 0x00000000D0001000
[ 11.727831] [drm] ring test succeeded in 0 usecs
[ 11.727962] [drm] radeon: ib pool ready.
[ 11.728070] [drm] ib test succeeded in 0 usecs
[ 11.729478] [drm] Radeon Display Connectors
[ 11.729482] [drm] Connector 0:
[ 11.729484] [drm] VGA
[ 11.729486] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 11.729488] [drm] Encoders:
[ 11.729490] [drm] CRT1: INTERNAL_DAC1
[ 11.729491] [drm] Connector 1:
[ 11.729492] [drm] DVI-I
[ 11.729494] [drm] HPD1
[ 11.729496] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 11.729497] [drm] Encoders:
[ 11.729498] [drm] CRT2: INTERNAL_DAC2
[ 11.729500] [drm] DFP1: INTERNAL_TMDS1
[ 11.729501] [drm] Connector 2:
[ 11.729503] [drm] S-video
[ 11.729504] [drm] Encoders:
[ 11.729505] [drm] TV1: INTERNAL_DAC2
[ 11.788494] [drm] Radeon display connector VGA-1: Found valid EDID
[ 11.798303] [drm] Radeon display connector DVI-I-1: No monitor connected or invalid EDID
[ 11.844770] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844776] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844779] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844782] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844784] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844787] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844789] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844791] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844794] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844796] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844798] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844801] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844803] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844805] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844809] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844811] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844814] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844816] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844818] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844821] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844823] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844825] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844827] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844830] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844832] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844834] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.844837] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 11.844839] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 11.848561] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.849218] Registered led device: rt73usb-phy0::radio
[ 11.849236] Registered led device: rt73usb-phy0::assoc
[ 11.849256] Registered led device: rt73usb-phy0::quality
[ 11.849731] usbcore: registered new interface driver rt73usb
[ 11.881770] [drm] fb mappable at 0xF00C0000
[ 11.881772] [drm] vram apper at 0xF0000000
[ 11.881774] [drm] size 3145728
[ 11.881775] [drm] fb depth is 24
[ 11.881777] [drm] pitch is 4096
[ 11.881880] fbcon: radeondrmfb (fb0) is primary device
[ 11.882574] Console: switching to colour frame buffer device 128x48
[ 11.882600] fb0: radeondrmfb frame buffer device
[ 11.882602] drm: registered panic notifier
[ 11.882611] [drm] Initialized radeon 2.10.0 20080528 for 0000:02:00.0 on minor 0
[ 11.977423] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.348389] type=1400 audit(1334749037.840:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=827 comm="apparmor_parser"
[ 12.348568] type=1400 audit(1334749037.840:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=826 comm="apparmor_parser"
[ 12.349106] type=1400 audit(1334749037.840:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=828 comm="apparmor_parser"
[ 12.349524] type=1400 audit(1334749037.840:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=828 comm="apparmor_parser"
[ 12.349752] type=1400 audit(1334749037.840:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=828 comm="apparmor_parser"
[ 12.352380] type=1400 audit(1334749037.844:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=831 comm="apparmor_parser"
[ 12.352845] type=1400 audit(1334749037.844:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=831 comm="apparmor_parser"
[ 12.364099] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.367986] forcedeth 0000:00:07.0: irq 44 for MSI/MSI-X
[ 12.368381] forcedeth 0000:00:07.0: eth1: no link during initialization
[ 12.369019] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.493999] init: failsafe main process (766) killed by TERM signal
[ 12.495596] init: apport pre-start process (888) terminated with status 1
[ 12.507597] Bluetooth: Core ver 2.16
[ 12.507640] NET: Registered protocol family 31
[ 12.507642] Bluetooth: HCI device and connection manager initialized
[ 12.507647] Bluetooth: HCI socket layer initialized
[ 12.507649] Bluetooth: L2CAP socket layer initialized
[ 12.514327] init: apport post-stop process (934) terminated with status 1
[ 12.517534] Bluetooth: SCO socket layer initialized
[ 12.522892] init: gdm main process (926) killed by TERM signal
[ 12.525424] Bluetooth: RFCOMM TTY layer initialized
[ 12.525432] Bluetooth: RFCOMM socket layer initialized
[ 12.525434] Bluetooth: RFCOMM ver 1.11
[ 12.526123] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.526129] Bluetooth: BNEP filters: protocol multicast
[ 12.654716] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 12.661200] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 12.667826] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 12.674447] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 12.952318] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 12.952493] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 12.952687] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 12.952838] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 12.962963] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 12.964704] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 12.965575] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 12.966460] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 13.330443] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 13.592124] init: plymouth-stop pre-start process (1239) terminated with status 1
[ 14.815578] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 66.311964] wlan0: authenticate with 00:22:3f:5c:23:e4 (try 1)
[ 66.313975] wlan0: authenticated
[ 66.369585] wlan0: associate with 00:22:3f:5c:23:e4 (try 1)
[ 66.372098] wlan0: RX AssocResp from 00:22:3f:5c:23:e4 (capab=0x431 status=0 aid=3)
[ 66.372102] wlan0: associated
[ 66.384484] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 66.384575] cfg80211: Calling CRDA for country: GB
[ 66.391373] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391379] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391382] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391384] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391387] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391389] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391391] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391394] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391396] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391398] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391400] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391403] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391405] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391408] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391410] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391412] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391414] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391417] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391419] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391421] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391423] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391426] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391428] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391430] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391432] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 66.391435] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 66.391437] cfg80211: Disabling freq 2484 MHz
[ 66.391440] cfg80211: Regulatory domain changed to country: GB
[ 66.391442] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 66.391445] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 66.391447] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 66.391450] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 66.391452] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 76.600011] wlan0: no IPv6 routers present