dmesg - first
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.0.0-17-generic (buildd@roseapple) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #30-Ubuntu SMP Thu Mar 8 17:34:21 UTC 2012 (Ubuntu 3.0.0-17.30-generic 3.0.22)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
Disabled fast string operations
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003be90000 (usable)
BIOS-e820: 000000003be90000 - 000000003be9e000 (ACPI data)
BIOS-e820: 000000003be9e000 - 000000003bf00000 (ACPI NVS)
BIOS-e820: 000000003bf00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
NX (Execute Disable) protection: approximated by x86 segment limits
DMI present.
DMI: Itautec Philco S.A. Infoway/W7635, BIOS G.4B-2310-8A20 06/05/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3be90 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03BF00000 mask FFFF00000 uncachable
2 base 03C000000 mask FFC000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 959MB, range: 1MB, type UC
reg 2, base: 960MB, range: 64MB, type UC
total RAM covered: 959M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 959MB, range: 1MB, type UC
reg 2, base: 960MB, range: 64MB, type UC
found SMP MP-table at [c00f7460] f7460
initial memory mapped : 0 - 01c00000
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
RAMDISK: 365ea000 - 372ed000
ACPI: RSDP 000f73b0 00014 (v00 PTLTD )
ACPI: RSDT 3be97ebb 00038 (v01 ITINFO 06040000 LTP 00000000)
ACPI: FACP 3be9dd70 00074 (v01 VN896 PTLTW 06040000 PTL_ 000F4240)
ACPI: DSDT 3be988f0 05480 (v01 FIC LM10W 06040000 MSFT 0100000E)
ACPI: FACS 3be9efc0 00040
ACPI: APIC 3be9dde4 0006A (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 3be9de4e 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: SLIC 3be9de8a 00176 (v01 ITINFO 06040000 00000000)
ACPI: SSDT 3be97ef3 00519 (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
70MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003be90
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0003be90
On node 0 totalpages: 245277
free_area_init_node: node 0, pgdat c17b54c0, node_mem_map f5e6a200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 142 pages used for memmap
HighMem zone: 17924 pages, LIFO batch:3
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f5800000 s26240 r0 d22912 u2097152
pcpu-alloc: s26240 r0 d22912 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243359
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 3926016 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0003be90)
Memory: 945792k/981568k available (5340k kernel code, 35316k reserved, 2595k data, 696k init, 72264k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc17c1000 - 0xc186f000 ( 696 kB)
.data : 0xc15371c4 - 0xc17c0140 (2595 kB)
.text : 0xc1000000 - 0xc15371c4 (5340 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f5408000 soft=f540a000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1596.058 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.11 BogoMIPS (lpj=6384232)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110413
ftrace: allocating 24903 entries in 49 pages
Enabling APIC mode: Flat. Using 2 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
CPU0: Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c
Performance Events: Core events, core PMU driver.
... version: 1
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
CPU 1 irqstacks, hard=f54a4000 soft=f54a6000
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 99000
Initializing CPU#1
Disabled fast string operations
Brought up 2 CPUs
Total of 2 processors activated (6384.37 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 3be9e000 (401408 bytes)
print_constraints: dummy:
Time: 12:35:32 Date: 04/15/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: BIOS BUG #81[49435000] found
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 3be98681 001E8 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001E8 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: SSDT 3be9840c 001F0 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001F0 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
ACPI: SSDT 3be98869 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: SSDT 3be985fc 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: Power Resource [PFAN] (off)
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfff7ffff] (ignored)
pci 0000:00:00.0: [1106:0364] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
pci 0000:00:00.1: [1106:1364] type 0 class 0x000600
pci 0000:00:00.2: [1106:2364] type 0 class 0x000600
pci 0000:00:00.3: [1106:3364] type 0 class 0x000600
pci 0000:00:00.4: [1106:4364] type 0 class 0x000600
pci 0000:00:00.5: [1106:5364] type 0 class 0x000800
pci 0000:00:00.6: [1106:6364] type 0 class 0x000600
pci 0000:00:00.7: [1106:7364] type 0 class 0x000600
pci 0000:00:01.0: [1106:b198] type 1 class 0x000604
pci 0000:00:02.0: [1106:a364] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: [1106:c364] type 1 class 0x000604
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:0f.0: [1106:0591] type 0 class 0x000101
pci 0000:00:0f.0: reg 10: [io 0x60b8-0x60bf]
pci 0000:00:0f.0: reg 14: [io 0x60b0-0x60b3]
pci 0000:00:0f.0: reg 18: [io 0x6008-0x600f]
pci 0000:00:0f.0: reg 1c: [io 0x6004-0x6007]
pci 0000:00:0f.0: reg 20: [io 0x6010-0x601f]
pci 0000:00:0f.0: reg 24: [io 0x6400-0x64ff]
pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
pci 0000:00:0f.1: reg 20: [io 0x60a0-0x60af]
pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.0: reg 20: [io 0x6020-0x603f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.1: reg 20: [io 0x6040-0x605f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.2: reg 20: [io 0x6060-0x607f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
pci 0000:00:10.3: reg 20: [io 0x6080-0x609f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
pci 0000:00:10.4: reg 10: [mem 0xc9400000-0xc94000ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
pci 0000:00:11.0: [1106:3337] type 0 class 0x000601
pci 0000:00:11.7: [1106:287e] type 0 class 0x000600
pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
pci 0000:00:12.0: reg 10: [io 0x6800-0x68ff]
pci 0000:00:12.0: reg 14: [mem 0xc9400400-0xc94004ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:13.0: [1106:337b] type 1 class 0x000604
pci 0000:00:13.1: [1106:337a] type 1 class 0x000604
pci 0000:01:00.0: [1106:3371] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xbfffffff pref]
pci 0000:01:00.0: reg 14: [mem 0xc8000000-0xc8ffffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xc8000000-0xc8ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:03.0: bridge window [mem 0xc9000000-0xc90fffff]
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:01.0: [1106:3288] type 0 class 0x000403
pci 0000:04:01.0: reg 10: [mem 0xc9100000-0xc9103fff 64bit]
pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
pci 0000:04:01.0: PME# disabled
pci 0000:04:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:13.0: PCI bridge to [bus 04-04]
pci 0000:00:13.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:13.0: bridge window [mem 0xc9100000-0xc91fffff]
pci 0000:00:13.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:01.0: [168c:001a] type 0 class 0x000200
pci 0000:05:01.0: reg 10: [mem 0xc9000000-0xc900ffff]
pci 0000:00:13.1: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:13.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:13.1: bridge window [mem 0xc9000000-0xc90fffff]
pci 0000:00:13.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:13.1: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:13.1: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE0C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *3, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *3
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:13.1: address space collision: [mem 0xc9000000-0xc90fffff] conflicts with PCI Bus 0000:03 [mem 0xc9000000-0xc90fffff]
pci 0000:05:01.0: address space collision: [mem 0xc9000000-0xc900ffff] conflicts with PCI Bus 0000:03 [mem 0xc9000000-0xc90fffff]
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 000000003be90000 - 000000003bffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x40000000-0xfff7ffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [mem 0xf0012000-0xf0012fff]
pnp 00:01: [mem 0xf0013000-0xf0013fff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xf0012000-0xf0012fff] has been reserved
system 00:01: [mem 0xf0013000-0xf0013fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x00f0-0x00ff]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0070-0x0075]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [mem 0x00000000-0x0009ffff]
pnp 00:06: [mem 0x000c0000-0x000cffff]
pnp 00:06: [mem 0x000e0000-0x000fffff]
pnp 00:06: [mem 0xe0000000-0xe01010ff]
pnp 00:06: [mem 0xe00100ff-0xe00190fe]
pnp 00:06: [mem 0xe00700ff-0xe007a0fe]
pnp 00:06: [mem 0xe00800ff-0xe00a00fe]
pnp 00:06: [mem 0xe01000ff-0xe06000fe]
pnp 00:06: [mem 0xf00120ff-0xf00140fe]
pnp 00:06: [mem 0xffb80000-0xffc7ffff]
pnp 00:06: [mem 0xfff00000-0xffffffff]
pnp 00:06: [mem 0xffee0000-0xffefffff]
pnp 00:06: [mem 0xfec00000-0xfec0ffff]
pnp 00:06: [mem 0xfee00000-0xfee0ffff]
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:06: [mem 0xe0000000-0xe01010ff] has been reserved
system 00:06: [mem 0xe00100ff-0xe00190fe] has been reserved
system 00:06: [mem 0xe00700ff-0xe007a0fe] has been reserved
system 00:06: [mem 0xe00800ff-0xe00a00fe] has been reserved
system 00:06: [mem 0xe01000ff-0xe06000fe] could not be reserved
system 00:06: [mem 0xf00120ff-0xf00140fe] could not be reserved
system 00:06: [mem 0xffb80000-0xffc7ffff] has been reserved
system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
system 00:06: [mem 0xffee0000-0xffefffff] has been reserved
system 00:06: [mem 0xfec00000-0xfec0ffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee0ffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:07: [io 0x0061-0x0063]
pnp 00:07: [io 0x0065-0x006f]
pnp 00:07: [io 0x0072-0x0075]
pnp 00:07: [io 0x00a8-0x00a9]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0022]
pnp 00:07: [io 0x002e]
pnp 00:07: [io 0x0092]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0xfe10-0xfe11]
pnp 00:07: [io 0xfe00]
pnp 00:07: [io 0x4000-0x407f]
pnp 00:07: [io 0x4100-0x411f]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0xfe10-0xfe11] has been reserved
system 00:07: [io 0xfe00] has been reserved
system 00:07: [io 0x4000-0x407f] has been reserved
system 00:07: [io 0x4100-0x411f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [irq 12]
pnp 00:08: Plug and Play ACPI device, IDs STL3842 PNP0f13 (active)
pnp 00:09: [io 0x0060]
pnp 00:09: [io 0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:13.1: BAR 14: assigned [mem 0x40000000-0x400fffff]
pci 0000:00:03.0: BAR 15: assigned [mem 0x40100000-0x402fffff 64bit pref]
pci 0000:00:02.0: BAR 14: assigned [mem 0x40300000-0x404fffff]
pci 0000:00:02.0: BAR 15: assigned [mem 0x40500000-0x406fffff 64bit pref]
pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x10000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xc8000000-0xc8ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff pref]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.0: bridge window [mem 0x40300000-0x404fffff]
pci 0000:00:02.0: bridge window [mem 0x40500000-0x406fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:03.0: bridge window [mem 0xc9000000-0xc90fffff]
pci 0000:00:03.0: bridge window [mem 0x40100000-0x402fffff 64bit pref]
pci 0000:00:13.0: PCI bridge to [bus 04-04]
pci 0000:00:13.0: bridge window [io disabled]
pci 0000:00:13.0: bridge window [mem 0xc9100000-0xc91fffff]
pci 0000:00:13.0: bridge window [mem pref disabled]
pci 0000:05:01.0: BAR 0: assigned [mem 0x40000000-0x4000ffff]
pci 0000:05:01.0: BAR 0: set to [mem 0x40000000-0x4000ffff] (PCI address [0x40000000-0x4000ffff])
pci 0000:00:13.1: PCI bridge to [bus 05-05]
pci 0000:00:13.1: bridge window [io disabled]
pci 0000:00:13.1: bridge window [mem 0x40000000-0x400fffff]
pci 0000:00:13.1: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:13.0: setting latency timer to 64
pci 0000:00:13.1: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xc8000000-0xc8ffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x40300000-0x404fffff]
pci_bus 0000:02: resource 2 [mem 0x40500000-0x406fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:03: resource 1 [mem 0xc9000000-0xc90fffff]
pci_bus 0000:03: resource 2 [mem 0x40100000-0x402fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xc9100000-0xc91fffff]
pci_bus 0000:05: resource 1 [mem 0x40000000-0x400fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
Freeing initrd memory: 13324k freed
pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
audit: initializing netlink socket (disabled)
type=2000 audit(1334493334.108:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.16)
msgmni has been set to 1732
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:03.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1110
intel_idle: does not run on family 6 model 14
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (32 C)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ERST: Table is not found!
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
agpgart: Detected VIA P4M900 chipset
agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xc0000000
brd: module loaded
loop: module loaded
pata_acpi 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pata_acpi 0000:00:0f.0: setting latency timer to 64
pata_acpi 0000:00:0f.0: PCI INT B disabled
pata_acpi 0000:00:0f.1: power state changed by ACPI to D0
pata_acpi 0000:00:0f.1: power state changed by ACPI to D0
pata_acpi 0000:00:0f.1: setting latency timer to 64
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: setting latency timer to 64
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xc9400000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.0: setting latency timer to 64
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 20, io base 0x00006020
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:10.1: setting latency timer to 64
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 22, io base 0x00006040
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: setting latency timer to 64
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x00006060
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:10.3: setting latency timer to 64
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 23, io base 0x00006080
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 8:415:582
pci_bus 0000:03: hash matches
rtc_cmos 00:04: setting system clock to 2012-04-15 12:35:35 UTC (1334493335)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 696k freed
Write protecting the kernel text: 5344k
Write protecting the kernel read-only data: 2192k
udevd[80]: starting version 173
sata_via 0000:00:0f.0: version 2.6
sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0x60b8 ctl 0x60b0 bmdma 0x6010 irq 21
ata2: SATA max UDMA/133 cmd 0x6008 ctl 0x6004 bmdma 0x6018 irq 21
via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0xc9400400, 00:14:0b:37:56:78, IRQ 23
via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
pata_via 0000:00:0f.1: version 0.3.4
pata_via 0000:00:0f.1: power state changed by ACPI to D0
pata_via 0000:00:0f.1: power state changed by ACPI to D0
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
ata3: port disabled. ignoring.
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: SAMSUNG HM080HI, AB100-16, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM080HI AB10 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
ata4.00: ATAPI: Optiarc DVD RW AD-7560A, DX09, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DX09 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665267
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665261
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 797665
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 797664
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665266
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665256
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665264
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665263
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665262
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665259
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665260
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665249
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665258
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665248
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665252
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665233
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665255
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665251
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665253
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665250
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665245
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665246
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665243
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665247
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665244
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665241
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665242
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665209
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665227
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665216
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2490401
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665240
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665239
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665238
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665229
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665232
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665225
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665211
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665237
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665236
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665235
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665228
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665234
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665231
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665230
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665226
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665224
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665223
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665222
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665221
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665220
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665219
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665218
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665214
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665215
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665212
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665210
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 664765
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 664759
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 797152
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 797150
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 664758
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 664757
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 662020
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 656883
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1443291
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3539929
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 656881
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665174
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3539762
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 3538951
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665171
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 656895
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665169
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 656885
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 656880
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 656877
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 656874
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 656879
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665172
EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 665173
EXT4-fs (sda1): 81 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
udevd[293]: starting version 173
Adding 979964k swap on /dev/sda5. Priority:-1 extents:1 across:979964k
lp: driver loaded but no devices found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
acpi device:1c: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1a/LNXVIDEO:00/input/input4
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
cfg80211: Calling CRDA to update world regulatory domain
ath5k 0000:05:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k 0000:05:01.0: registered as 'phy0'
type=1400 audit(1334493353.351:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=615 comm="apparmor_parser"
type=1400 audit(1334493353.351:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=615 comm="apparmor_parser"
type=1400 audit(1334493353.351:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=615 comm="apparmor_parser"
type=1400 audit(1334493353.363:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=609 comm="apparmor_parser"
type=1400 audit(1334493353.375:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=609 comm="apparmor_parser"
type=1400 audit(1334493353.375:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=609 comm="apparmor_parser"
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
cfg80211: Calling CRDA for country: US
ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
cfg80211: Disabling freq 2467 MHz
cfg80211: Disabling freq 2472 MHz
cfg80211: Disabling freq 2484 MHz
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:04:01.0: setting latency timer to 64
HDA Intel 0000:04:01.0: PCI: Disallowing DAC for device
type=1400 audit(1334493353.755:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=745 comm="apparmor_parser"
type=1400 audit(1334493353.759:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=745 comm="apparmor_parser"
type=1400 audit(1334493353.759:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=745 comm="apparmor_parser"
type=1400 audit(1334493353.827:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=749 comm="apparmor_parser"
input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input5
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input6
init: failsafe main process (701) killed by TERM signal
init: apport pre-start process (834) terminated with status 1
init: apport post-stop process (866) terminated with status 1
via-rhine 0000:00:12.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xa0000000, mapped to 0xf9000000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
[drm] Initialized drm 1.1.0 20060810
init: plymouth-upstart-bridge main process (746) killed by TERM signal
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
init: plymouth-stop pre-start process (1253) terminated with status 1
wlan0: authenticate with 00:1d:1a:09:98:42 (try 1)
wlan0: authenticated
wlan0: associate with 00:1d:1a:09:98:42 (try 1)
wlan0: RX AssocResp from 00:1d:1a:09:98:42 (capab=0x431 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
usb 1-3: new high speed USB device number 2 using ehci_hcd
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
scsi4 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 4:0:0:0: Direct-Access Kingston DTLocker+ PMAP PQ: 0 ANSI: 0 CCS
scsi 4:0:0:1: CD-ROM Kingston DTLocker+ PMAP PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sr1: scsi3-mmc drive: 0x/0x writer tray
sr 4:0:0:1: Attached scsi CD-ROM sr1
sr 4:0:0:1: Attached scsi generic sg3 type 5
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
usb 1-3: USB disconnect, device number 2