dmesg - 201410-pts-audio
0
wlan0: beacon received
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=28)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 3
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: authenticate with 00:17:df:3b:99:60 (try 1)
wlan0: authenticate with 00:17:df:3b:99:60 (try 2)
wlan0: authenticated
wlan0: associate with 00:17:df:3b:99:60 (try 1)
wlan0: associate with 00:17:df:3b:99:60 (try 2)
wlan0: RX ReassocResp from 00:17:df:3b:99:60 (capab=0x111 status=0 aid=1)
wlan0: associated
wlan0: moving STA 00:17:df:3b:99:60 to state 1
wlan0: moving STA 00:17:df:3b:99:60 to state 2
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: moving STA 00:17:df:3b:99:60 to state 3
wlan0: authenticate with 00:17:df:37:9d:90 (try 1)
wlan0: authenticated
wlan0: moving STA 00:17:df:3b:99:60 to state 2
wlan0: moving STA 00:17:df:3b:99:60 to state 1
wlan0: moving STA 00:17:df:3b:99:60 to state 0
wlan0: waiting for beacon from 00:17:df:37:9d:90
wlan0: authenticate with 00:17:df:3b:99:60 (try 1)
wlan0: authenticated
wlan0: associate with 00:17:df:3b:99:60 (try 1)
wlan0: RX ReassocResp from 00:17:df:3b:99:60 (capab=0x111 status=0 aid=1)
wlan0: associated
wlan0: moving STA 00:17:df:3b:99:60 to state 1
wlan0: moving STA 00:17:df:3b:99:60 to state 2
wlan0: deauthenticated from 00:17:df:3b:99:60 (Reason: 2)
wlan0: moving STA 00:17:df:3b:99:60 to state 1
wlan0: moving STA 00:17:df:3b:99:60 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: authenticate with 00:14:1b:64:21:10 (try 1)
wlan0: authenticate with 00:14:1b:64:21:10 (try 2)
wlan0: authenticated
wlan0: associate with 00:14:1b:64:21:10 (try 1)
wlan0: associate with 00:14:1b:64:21:10 (try 2)
wlan0: RX ReassocResp from 00:14:1b:64:21:10 (capab=0x111 status=0 aid=2)
wlan0: associated
wlan0: moving STA 00:14:1b:64:21:10 to state 1
wlan0: moving STA 00:14:1b:64:21:10 to state 2
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: moving STA 00:14:1b:64:21:10 to state 3
usb 1-1.4: USB disconnect, device number 8
wlan0: authenticate with 00:14:1b:60:24:c0 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:64:21:10 to state 2
wlan0: moving STA 00:14:1b:64:21:10 to state 1
wlan0: moving STA 00:14:1b:64:21:10 to state 0
wlan0: associate with 00:14:1b:60:24:c0 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:24:c0 (capab=0x431 status=0 aid=4)
wlan0: associated
wlan0: moving STA 00:14:1b:60:24:c0 to state 1
wlan0: moving STA 00:14:1b:60:24:c0 to state 2
wlan0: moving STA 00:14:1b:60:24:c0 to state 3
wlan0: authenticate with 00:14:1b:64:21:10 (try 1)
wlan0: authenticate with 00:14:1b:64:21:10 (try 2)
wlan0: authenticate with 00:14:1b:64:21:10 (try 3)
wlan0: authentication with 00:14:1b:64:21:10 timed out
wlan0: moving STA 00:14:1b:60:24:c0 to state 2
wlan0: deauthenticating from 00:14:1b:60:24:c0 by local choice (reason=2)
wlan0: moving STA 00:14:1b:60:24:c0 to state 1
wlan0: moving STA 00:14:1b:60:24:c0 to state 0
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 00:14:1b:60:24:c0 (try 1)
wlan0: authenticated
wlan0: associate with 00:14:1b:60:24:c0 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:24:c0 (capab=0x431 status=0 aid=4)
wlan0: associated
wlan0: moving STA 00:14:1b:60:24:c0 to state 1
wlan0: moving STA 00:14:1b:60:24:c0 to state 2
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
wlan0: moving STA 00:14:1b:60:24:c0 to state 3
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: deauthenticating from 00:14:1b:60:24:c0 by local choice (reason=3)
wlan0: moving STA 00:14:1b:60:24:c0 to state 2
wlan0: moving STA 00:14:1b:60:24:c0 to state 1
wlan0: moving STA 00:14:1b:60:24:c0 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
ACPI handle has no context!
ACPI handle has no context!
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
PM: suspend of devices complete after 587.838 msecs
pcieport 0000:00:1c.6: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
PM: late suspend of devices complete after 44.182 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 41
CPU 1 is now offline
Broke affinity for irq 42
CPU 2 is now offline
Broke affinity for irq 43
CPU 3 is now offline
Broke affinity for irq 44
CPU 4 is now offline
CPU 5 is now offline
CPU 6 is now offline
CPU 7 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
microcode: CPU0 updated to revision 0x4, date = 2010-04-05
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU1 updated to revision 0x4, date = 2010-04-05
hpet: hpet3 irq 41 for MSI
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
smpboot cpu 2: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU2 updated to revision 0x4, date = 2010-04-05
hpet: hpet4 irq 42 for MSI
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
smpboot cpu 3: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU3 updated to revision 0x4, date = 2010-04-05
hpet: hpet5 irq 43 for MSI
CPU3 is up
Booting Node 0 Processor 4 APIC 0x4
smpboot cpu 4: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU4 updated to revision 0x4, date = 2010-04-05
hpet: hpet6 irq 44 for MSI
CPU4 is up
Booting Node 0 Processor 5 APIC 0x5
smpboot cpu 5: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU5 updated to revision 0x4, date = 2010-04-05
CPU5 is up
Booting Node 0 Processor 6 APIC 0x6
smpboot cpu 6: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU6 updated to revision 0x4, date = 2010-04-05
CPU6 is up
Booting Node 0 Processor 7 APIC 0x7
smpboot cpu 7: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU7 updated to revision 0x4, date = 2010-04-05
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
PM: early resume of devices complete after 2.131 msecs
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1e.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
thinkpad_acpi: EC reports that Thermal Table has changed
firewire_core: skipped bus generations, destroying all nodes
usb 1-1.6: reset high-speed USB device number 6 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata6: SATA link down (SStatus 0 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/66
usb 1-1.3: reset full-speed USB device number 4 using ehci_hcd
sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
firewire_core: rediscovered device fw0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 1917.538 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em1: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:18:f8:f9:28:d6 (try 1)
wlan0: authenticated
wlan0: associate with 00:18:f8:f9:28:d6 (try 1)
wlan0: RX AssocResp from 00:18:f8:f9:28:d6 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: moving STA 00:18:f8:f9:28:d6 to state 3
wlan0: no IPv6 routers present
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
thinkpad_acpi: EC reports that Thermal Table has changed
wlan0: deauthenticating from 00:18:f8:f9:28:d6 by local choice (reason=3)
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
ACPI handle has no context!
ACPI handle has no context!
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
PM: suspend of devices complete after 616.913 msecs
pcieport 0000:00:1c.6: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
PM: late suspend of devices complete after 44.109 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 41
CPU 1 is now offline
Broke affinity for irq 42
CPU 2 is now offline
Broke affinity for irq 43
CPU 3 is now offline
Broke affinity for irq 44
CPU 4 is now offline
CPU 5 is now offline
CPU 6 is now offline
CPU 7 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
microcode: CPU0 updated to revision 0x4, date = 2010-04-05
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU1 updated to revision 0x4, date = 2010-04-05
hpet: hpet3 irq 41 for MSI
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
smpboot cpu 2: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU2 updated to revision 0x4, date = 2010-04-05
hpet: hpet4 irq 42 for MSI
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
smpboot cpu 3: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU3 updated to revision 0x4, date = 2010-04-05
hpet: hpet5 irq 43 for MSI
CPU3 is up
Booting Node 0 Processor 4 APIC 0x4
smpboot cpu 4: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU4 updated to revision 0x4, date = 2010-04-05
hpet: hpet6 irq 44 for MSI
CPU4 is up
Booting Node 0 Processor 5 APIC 0x5
smpboot cpu 5: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU5 updated to revision 0x4, date = 2010-04-05
CPU5 is up
Booting Node 0 Processor 6 APIC 0x6
smpboot cpu 6: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU6 updated to revision 0x4, date = 2010-04-05
CPU6 is up
Booting Node 0 Processor 7 APIC 0x7
smpboot cpu 7: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU7 updated to revision 0x4, date = 2010-04-05
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
PM: early resume of devices complete after 2.667 msecs
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1e.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
firewire_core: skipped bus generations, destroying all nodes
usb 1-1.3: reset full-speed USB device number 4 using ehci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/66
usb 1-1.6: reset high-speed USB device number 6 using ehci_hcd
sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
firewire_core: rediscovered device fw0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 1973.921 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em1: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:18:f8:f9:28:d6 (try 1)
wlan0: authenticated
wlan0: associate with 00:18:f8:f9:28:d6 (try 1)
wlan0: RX AssocResp from 00:18:f8:f9:28:d6 (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: moving STA 00:18:f8:f9:28:d6 to state 3
wlan0: no IPv6 routers present
wlan0: deauthenticating from 00:18:f8:f9:28:d6 by local choice (reason=3)
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:18:f8:f9:28:d6 (try 1)
wlan0: authenticated
wlan0: associate with 00:18:f8:f9:28:d6 (try 1)
wlan0: RX AssocResp from 00:18:f8:f9:28:d6 (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: moving STA 00:18:f8:f9:28:d6 to state 3
wlan0: no IPv6 routers present
gnome-shell[4719]: segfault at 0 ip 00007ff5f2f1515e sp 00007fff3062f480 error 4 in libaccountsservice.so.0.0.0[7ff5f2efd000+3b000]
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
source:src[6011]: segfault at 7f37ac02b003 ip 00007f37d2828482 sp 00007f37cb7fd9b0 error 4 in libgstrsvg.so[7f37d2825000+6000]
source:src[6041]: segfault at 7f1254649003 ip 00007f1269826482 sp 00007f126346d9b0 error 4 in libgstrsvg.so[7f1269823000+6000]
wlan0: deauthenticating from 00:18:f8:f9:28:d6 by local choice (reason=3)
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
ACPI handle has no context!
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
ACPI handle has no context!
PM: suspend of devices complete after 586.875 msecs
pcieport 0000:00:1c.6: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
PM: late suspend of devices complete after 44.126 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 41
CPU 1 is now offline
Broke affinity for irq 42
CPU 2 is now offline
Broke affinity for irq 43
CPU 3 is now offline
Broke affinity for irq 44
CPU 4 is now offline
CPU 5 is now offline
CPU 6 is now offline
CPU 7 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
microcode: CPU0 updated to revision 0x4, date = 2010-04-05
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU1 updated to revision 0x4, date = 2010-04-05
hpet: hpet3 irq 41 for MSI
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
smpboot cpu 2: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU2 updated to revision 0x4, date = 2010-04-05
hpet: hpet4 irq 42 for MSI
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
smpboot cpu 3: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU3 updated to revision 0x4, date = 2010-04-05
hpet: hpet5 irq 43 for MSI
CPU3 is up
Booting Node 0 Processor 4 APIC 0x4
smpboot cpu 4: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU4 updated to revision 0x4, date = 2010-04-05
hpet: hpet6 irq 44 for MSI
CPU4 is up
Booting Node 0 Processor 5 APIC 0x5
smpboot cpu 5: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU5 updated to revision 0x4, date = 2010-04-05
CPU5 is up
Booting Node 0 Processor 6 APIC 0x6
smpboot cpu 6: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU6 updated to revision 0x4, date = 2010-04-05
CPU6 is up
Booting Node 0 Processor 7 APIC 0x7
smpboot cpu 7: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU7 updated to revision 0x4, date = 2010-04-05
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
PM: early resume of devices complete after 2.776 msecs
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
pci 0000:00:1e.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ahci 0000:00:1f.2: setting latency timer to 64
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: setting latency timer to 64
firewire_core: skipped bus generations, destroying all nodes
usb 1-1.6: reset high-speed USB device number 6 using ehci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
usb 1-1.3: reset full-speed USB device number 4 using ehci_hcd
sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/66
firewire_core: rediscovered device fw0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 1976.027 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em1: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:18:f8:f9:28:d6 (try 1)
wlan0: authenticated
wlan0: associate with 00:18:f8:f9:28:d6 (try 1)
wlan0: RX AssocResp from 00:18:f8:f9:28:d6 (capab=0x411 status=0 aid=1)
wlan0: associated
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: moving STA 00:18:f8:f9:28:d6 to state 3
wlan0: no IPv6 routers present
wlan0: deauthenticating from 00:18:f8:f9:28:d6 by local choice (reason=3)
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
ACPI handle has no context!
ACPI handle has no context!
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
PM: suspend of devices complete after 623.963 msecs
pcieport 0000:00:1c.6: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
PM: late suspend of devices complete after 44.111 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 41
CPU 1 is now offline
Broke affinity for irq 42
CPU 2 is now offline
Broke affinity for irq 43
CPU 3 is now offline
Broke affinity for irq 44
CPU 4 is now offline
CPU 5 is now offline
CPU 6 is now offline
CPU 7 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
microcode: CPU0 updated to revision 0x4, date = 2010-04-05
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU1 updated to revision 0x4, date = 2010-04-05
hpet: hpet3 irq 41 for MSI
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
smpboot cpu 2: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU2 updated to revision 0x4, date = 2010-04-05
hpet: hpet4 irq 42 for MSI
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
smpboot cpu 3: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU3 updated to revision 0x4, date = 2010-04-05
hpet: hpet5 irq 43 for MSI
CPU3 is up
Booting Node 0 Processor 4 APIC 0x4
smpboot cpu 4: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU4 updated to revision 0x4, date = 2010-04-05
hpet: hpet6 irq 44 for MSI
CPU4 is up
Booting Node 0 Processor 5 APIC 0x5
smpboot cpu 5: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU5 updated to revision 0x4, date = 2010-04-05
CPU5 is up
Booting Node 0 Processor 6 APIC 0x6
smpboot cpu 6: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU6 updated to revision 0x4, date = 2010-04-05
CPU6 is up
Booting Node 0 Processor 7 APIC 0x7
smpboot cpu 7: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU7 updated to revision 0x4, date = 2010-04-05
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
PM: early resume of devices complete after 2.607 msecs
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ahci 0000:00:1f.2: setting latency timer to 64
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: setting latency timer to 64
usb 1-1.6: reset high-speed USB device number 6 using ehci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/66
usb 1-1.3: reset full-speed USB device number 4 using ehci_hcd
firewire_core: skipped bus generations, destroying all nodes
sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
firewire_core: rediscovered device fw0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 1971.112 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em1: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:18:f8:f9:28:d6 (try 1)
wlan0: authenticated
wlan0: associate with 00:18:f8:f9:28:d6 (try 1)
wlan0: RX AssocResp from 00:18:f8:f9:28:d6 (capab=0x411 status=0 aid=3)
wlan0: associated
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: moving STA 00:18:f8:f9:28:d6 to state 3
------------[ cut here ]------------
WARNING: at kernel/time/timekeeping.c:863 do_timer+0x371/0x520()
Hardware name: 438924U
Adjusting tsc more then 11% (10818456 vs 10771570)
Modules linked in: tun binfmt_misc fuse nvidia(PO) ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables iptable_nat nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack rfcomm nf_conntrack bnep arc4 uvcvideo iwlwifi btusb videobuf2_vmalloc videobuf2_memops videobuf2_core videodev bluetooth mac80211 v4l2_compat_ioctl32 thinkpad_acpi cfg80211 snd_hda_codec_hdmi media i2c_i801 rfkill microcode i2c_core i7core_edac edac_core iTCO_wdt snd_hda_codec_conexant e1000e iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore uinput firewire_ohci firewire_core crc_itu_t usb_storage sdhci_pci sdhci mmc_core video mxm_wmi wmi [last unloaded: scsi_wait_scan]
Pid: 0, comm: swapper/0 Tainted: P W O 3.3.0-8.fc17.x86_64 #1
Call Trace:
[] warn_slowpath_common+0x7f/0xc0
[] warn_slowpath_fmt+0x46/0x50
[] ? hrtimer_try_to_cancel+0x4a/0xd0
[] do_timer+0x371/0x520
[] tick_do_update_jiffies64+0x78/0xc0
[] tick_check_idle+0xac/0xe0
[] irq_enter+0x79/0x80
[] do_IRQ+0x3e/0xe0
[] common_interrupt+0x6e/0x6e
[] ? intel_idle+0xe6/0x150
[] ? intel_idle+0xc7/0x150
[] cpuidle_idle_call+0xb7/0x230
[] cpu_idle+0xaf/0x120
[] rest_init+0x72/0x74
[] start_kernel+0x3ba/0x3c5
[] x86_64_start_reservations+0x131/0x135
[] x86_64_start_kernel+0x100/0x10f
---[ end trace ba760225befbcc1a ]---
wlan0: no IPv6 routers present
hrtimer: interrupt took 21670 ns
wlan0: deauthenticating from 00:18:f8:f9:28:d6 by local choice (reason=3)
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
ACPI handle has no context!
ACPI handle has no context!
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
PM: suspend of devices complete after 584.818 msecs
pcieport 0000:00:1c.6: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
PM: late suspend of devices complete after 44.188 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 41
CPU 1 is now offline
Broke affinity for irq 42
CPU 2 is now offline
Broke affinity for irq 43
CPU 3 is now offline
Broke affinity for irq 44
CPU 4 is now offline
CPU 5 is now offline
CPU 6 is now offline
CPU 7 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
microcode: CPU0 updated to revision 0x4, date = 2010-04-05
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU1 updated to revision 0x4, date = 2010-04-05
hpet: hpet3 irq 41 for MSI
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
smpboot cpu 2: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU2 updated to revision 0x4, date = 2010-04-05
hpet: hpet4 irq 42 for MSI
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
smpboot cpu 3: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU3 updated to revision 0x4, date = 2010-04-05
hpet: hpet5 irq 43 for MSI
CPU3 is up
Booting Node 0 Processor 4 APIC 0x4
smpboot cpu 4: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU4 updated to revision 0x4, date = 2010-04-05
hpet: hpet6 irq 44 for MSI
CPU4 is up
Booting Node 0 Processor 5 APIC 0x5
smpboot cpu 5: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU5 updated to revision 0x4, date = 2010-04-05
CPU5 is up
Booting Node 0 Processor 6 APIC 0x6
smpboot cpu 6: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU6 updated to revision 0x4, date = 2010-04-05
CPU6 is up
Booting Node 0 Processor 7 APIC 0x7
smpboot cpu 7: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU7 updated to revision 0x4, date = 2010-04-05
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
PM: early resume of devices complete after 1.859 msecs
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
ehci_hcd 0000:00:1d.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
firewire_core: skipped bus generations, destroying all nodes
usb 1-1.6: reset high-speed USB device number 6 using ehci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/66
usb 1-1.3: reset full-speed USB device number 4 using ehci_hcd
sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
firewire_core: rediscovered device fw0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 1969.909 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em1: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX AssocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=19)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: moving STA 00:14:1b:60:21:10 to state 3
wlan0: no IPv6 routers present
wlan0: authenticate with 00:17:df:37:99:60 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
wlan0: associate with 00:17:df:37:99:60 (try 1)
wlan0: RX ReassocResp from 00:17:df:37:99:60 (capab=0x431 status=0 aid=9)
wlan0: associated
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 2
wlan0: deauthenticated from 00:17:df:37:99:60 (Reason: 2)
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=19)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
cfg80211: Calling CRDA for country: US
wlan0: moving STA 00:14:1b:60:21:10 to state 3
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: authenticate with 00:14:1b:64:21:10 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
wlan0: associate with 00:14:1b:64:21:10 (try 1)
wlan0: associate with 00:14:1b:64:21:10 (try 2)
wlan0: RX ReassocResp from 00:14:1b:64:21:10 (capab=0x111 status=0 aid=4)
wlan0: associated
wlan0: moving STA 00:14:1b:64:21:10 to state 1
wlan0: moving STA 00:14:1b:64:21:10 to state 2
wlan0: moving STA 00:14:1b:64:21:10 to state 3
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:64:21:10 to state 2
wlan0: moving STA 00:14:1b:64:21:10 to state 1
wlan0: moving STA 00:14:1b:64:21:10 to state 0
wlan0: waiting for beacon from 00:14:1b:60:21:10
wlan0: beacon received
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=37)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 3
wlan0: authenticate with 00:17:df:37:9d:90 (try 1)
wlan0: authenticate with 00:17:df:37:9d:90 (try 2)
wlan0: authenticated
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
wlan0: waiting for beacon from 00:17:df:37:9d:90
wlan0: beacon received
wlan0: associate with 00:17:df:37:9d:90 (try 1)
wlan0: RX ReassocResp from 00:17:df:37:9d:90 (capab=0x431 status=0 aid=2)
wlan0: associated
wlan0: moving STA 00:17:df:37:9d:90 to state 1
wlan0: moving STA 00:17:df:37:9d:90 to state 2
wlan0: moving STA 00:17:df:37:9d:90 to state 3
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: moving STA 00:17:df:37:9d:90 to state 2
wlan0: moving STA 00:17:df:37:9d:90 to state 1
wlan0: moving STA 00:17:df:37:9d:90 to state 0
wlan0: waiting for beacon from 00:14:1b:60:21:10
wlan0: beacon received
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=9)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 3
wlan0: authenticate with 00:17:df:3b:99:60 (try 1)
wlan0: authenticate with 00:17:df:3b:99:60 (try 2)
wlan0: authenticate with 00:17:df:3b:99:60 (try 3)
wlan0: authentication with 00:17:df:3b:99:60 timed out
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: deauthenticating from 00:14:1b:60:21:10 by local choice (reason=2)
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=33)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
wlan0: moving STA 00:14:1b:60:21:10 to state 3
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
gnome-shell[5710]: segfault at 0 ip 00007f3ee2b1215e sp 00007fffb6edf2d0 error 4 in libaccountsservice.so.0.0.0[7f3ee2afa000+3b000]
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
CortexCommand.b[10035] trap int3 ip:41b24e sp:7fff0a46db40 error:0
CortexCommand.b[10490] trap int3 ip:41b24e sp:7fff93f86420 error:0
CortexCommand.b[10807] trap int3 ip:41b24e sp:7fff679e9d60 error:0
CortexCommand.b[15272] trap int3 ip:41b24e sp:7fffa107bd40 error:0
CortexCommand.b[15403] trap int3 ip:41b24e sp:7fff2fdf0b90 error:0
CortexCommand.b[15556] trap int3 ip:41b24e sp:7fff30fcdf10 error:0
wlan0: deauthenticating from 00:14:1b:60:21:10 by local choice (reason=3)
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
ACPI handle has no context!
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
ACPI handle has no context!
PM: suspend of devices complete after 594.889 msecs
pcieport 0000:00:1c.6: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
PM: late suspend of devices complete after 44.137 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 41
CPU 1 is now offline
Broke affinity for irq 42
CPU 2 is now offline
Broke affinity for irq 43
CPU 3 is now offline
Broke affinity for irq 44
CPU 4 is now offline
CPU 5 is now offline
CPU 6 is now offline
CPU 7 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
microcode: CPU0 updated to revision 0x4, date = 2010-04-05
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU1 updated to revision 0x4, date = 2010-04-05
hpet: hpet3 irq 41 for MSI
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
smpboot cpu 2: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU2 updated to revision 0x4, date = 2010-04-05
hpet: hpet4 irq 42 for MSI
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
smpboot cpu 3: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU3 updated to revision 0x4, date = 2010-04-05
hpet: hpet5 irq 43 for MSI
CPU3 is up
Booting Node 0 Processor 4 APIC 0x4
smpboot cpu 4: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU4 updated to revision 0x4, date = 2010-04-05
hpet: hpet6 irq 44 for MSI
CPU4 is up
Booting Node 0 Processor 5 APIC 0x5
smpboot cpu 5: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU5 updated to revision 0x4, date = 2010-04-05
CPU5 is up
Booting Node 0 Processor 6 APIC 0x6
smpboot cpu 6: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU6 updated to revision 0x4, date = 2010-04-05
CPU6 is up
Booting Node 0 Processor 7 APIC 0x7
smpboot cpu 7: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU7 updated to revision 0x4, date = 2010-04-05
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
PM: early resume of devices complete after 1.777 msecs
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1e.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
ahci 0000:00:1f.2: setting latency timer to 64
thinkpad_acpi: EC reports that Thermal Table has changed
firewire_core: skipped bus generations, destroying all nodes
usb 1-1.6: reset high-speed USB device number 6 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata6: SATA link down (SStatus 0 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/66
usb 1-1.3: reset full-speed USB device number 4 using ehci_hcd
sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
firewire_core: rediscovered device fw0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 1970.658 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
e1000e 0000:00:19.0: irq 55 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em1: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:18:f8:f9:28:d6 (try 1)
wlan0: authenticated
wlan0: associate with 00:18:f8:f9:28:d6 (try 1)
wlan0: RX AssocResp from 00:18:f8:f9:28:d6 (capab=0x411 status=0 aid=2)
wlan0: associated
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: moving STA 00:18:f8:f9:28:d6 to state 3
wlan0: no IPv6 routers present
wlan0: deauthenticating from 00:18:f8:f9:28:d6 by local choice (reason=3)
wlan0: moving STA 00:18:f8:f9:28:d6 to state 2
wlan0: moving STA 00:18:f8:f9:28:d6 to state 1
wlan0: moving STA 00:18:f8:f9:28:d6 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ACPI handle has no context!
ACPI handle has no context!
ACPI handle has no context!
e1000e 0000:00:19.0: wake-up capability enabled by ACPI
PM: suspend of devices complete after 638.047 msecs
pcieport 0000:00:1c.6: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
PM: late suspend of devices complete after 45.041 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 41
CPU 1 is now offline
Broke affinity for irq 42
CPU 2 is now offline
Broke affinity for irq 43
CPU 3 is now offline
Broke affinity for irq 44
CPU 4 is now offline
CPU 5 is now offline
CPU 6 is now offline
CPU 7 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Extended CMOS year: 2000
microcode: CPU0 updated to revision 0x4, date = 2010-04-05
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU1 updated to revision 0x4, date = 2010-04-05
hpet: hpet3 irq 41 for MSI
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
smpboot cpu 2: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU2 updated to revision 0x4, date = 2010-04-05
hpet: hpet4 irq 42 for MSI
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
smpboot cpu 3: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU3 updated to revision 0x4, date = 2010-04-05
hpet: hpet5 irq 43 for MSI
CPU3 is up
Booting Node 0 Processor 4 APIC 0x4
smpboot cpu 4: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU4 updated to revision 0x4, date = 2010-04-05
hpet: hpet6 irq 44 for MSI
CPU4 is up
Booting Node 0 Processor 5 APIC 0x5
smpboot cpu 5: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU5 updated to revision 0x4, date = 2010-04-05
CPU5 is up
Booting Node 0 Processor 6 APIC 0x6
smpboot cpu 6: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU6 updated to revision 0x4, date = 2010-04-05
CPU6 is up
Booting Node 0 Processor 7 APIC 0x7
smpboot cpu 7: start_ip = 94000
Calibrating delay loop (skipped) already calibrated this CPU
NMI watchdog enabled, takes one hw-pmu counter.
microcode: CPU7 updated to revision 0x4, date = 2010-04-05
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
pcieport 0000:00:1c.6: wake-up capability disabled by ACPI
PM: early resume of devices complete after 2.006 msecs
e1000e 0000:00:19.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
pci 0000:00:1e.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ahci 0000:00:1f.2: setting latency timer to 64
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: setting latency timer to 64
thinkpad_acpi: EC reports that Thermal Table has changed
firewire_core: skipped bus generations, destroying all nodes
usb 1-1.6: reset high-speed USB device number 6 using ehci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
ata2.00: configured for UDMA/66
usb 1-1.3: reset full-speed USB device number 4 using ehci_hcd
sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:17:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
firewire_core: rediscovered device fw0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Starting disk
Extended CMOS year: 2000
PM: resume of devices complete after 1965.844 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
e1000e 0000:00:19.0: irq 54 for MSI/MSI-X
ADDRCONF(NETDEV_UP): em1: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: waiting for beacon from 00:14:1b:60:21:10
wlan0: beacon received
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX AssocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=20)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: moving STA 00:14:1b:60:21:10 to state 3
wlan0: no IPv6 routers present
wlan0: authenticate with 00:17:df:37:99:60 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
wlan0: associate with 00:17:df:37:99:60 (try 1)
wlan0: RX ReassocResp from 00:17:df:37:99:60 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 2
wlan0: moving STA 00:17:df:37:99:60 to state 3
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: moving STA 00:17:df:37:99:60 to state 2
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 0
wlan0: waiting for beacon from 00:14:1b:60:21:10
wlan0: beacon received
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=17)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 3
wlan0: authenticate with 00:17:df:37:99:60 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
wlan0: waiting for beacon from 00:17:df:37:99:60
wlan0: beacon received
wlan0: associate with 00:17:df:37:99:60 (try 1)
wlan0: RX ReassocResp from 00:17:df:37:99:60 (capab=0x431 status=0 aid=6)
wlan0: associated
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 2
wlan0: moving STA 00:17:df:37:99:60 to state 3
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: moving STA 00:17:df:37:99:60 to state 2
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 0
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=7)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 3
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: EC reports that Thermal Table has changed
wlan0: authenticate with 00:17:df:37:99:60 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
wlan0: waiting for beacon from 00:17:df:37:99:60
wlan0: beacon received
wlan0: associate with 00:17:df:37:99:60 (try 1)
wlan0: RX ReassocResp from 00:17:df:37:99:60 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 2
wlan0: moving STA 00:17:df:37:99:60 to state 3
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: moving STA 00:17:df:37:99:60 to state 2
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 0
wlan0: waiting for beacon from 00:14:1b:60:21:10
wlan0: beacon received
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=26)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 3
wlan0: authenticate with 00:17:df:37:99:60 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
wlan0: waiting for beacon from 00:17:df:37:99:60
wlan0: beacon received
wlan0: associate with 00:17:df:37:99:60 (try 1)
wlan0: RX ReassocResp from 00:17:df:37:99:60 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 2
wlan0: moving STA 00:17:df:37:99:60 to state 3
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: moving STA 00:17:df:37:99:60 to state 2
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 0
wlan0: waiting for beacon from 00:14:1b:60:21:10
wlan0: beacon received
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=25)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 3
wlan0: authenticate with 00:17:df:37:99:60 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
wlan0: waiting for beacon from 00:17:df:37:99:60
wlan0: beacon received
wlan0: associate with 00:17:df:37:99:60 (try 1)
wlan0: RX ReassocResp from 00:17:df:37:99:60 (capab=0x431 status=0 aid=5)
wlan0: associated
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 2
wlan0: deauthenticated from 00:17:df:37:99:60 (Reason: 2)
wlan0: moving STA 00:17:df:37:99:60 to state 1
wlan0: moving STA 00:17:df:37:99:60 to state 0
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=25)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
cfg80211: Calling CRDA for country: US
wlan0: moving STA 00:14:1b:60:21:10 to state 3
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: authenticate with 00:17:df:37:9d:90 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
wlan0: waiting for beacon from 00:17:df:37:9d:90
wlan0: beacon received
wlan0: associate with 00:17:df:37:9d:90 (try 1)
wlan0: RX ReassocResp from 00:17:df:37:9d:90 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: moving STA 00:17:df:37:9d:90 to state 1
wlan0: moving STA 00:17:df:37:9d:90 to state 2
wlan0: moving STA 00:17:df:37:9d:90 to state 3
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: moving STA 00:17:df:37:9d:90 to state 2
wlan0: moving STA 00:17:df:37:9d:90 to state 1
wlan0: moving STA 00:17:df:37:9d:90 to state 0
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=25)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 3
wlan0: authenticate with 00:17:df:3b:99:60 (try 1)
wlan0: authenticate with 00:17:df:3b:99:60 (try 2)
wlan0: authenticate with 00:17:df:3b:99:60 (try 3)
wlan0: authentication with 00:17:df:3b:99:60 timed out
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: deauthenticating from 00:14:1b:60:21:10 by local choice (reason=2)
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: associate with 00:14:1b:60:21:10 (try 1)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=25)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
wlan0: moving STA 00:14:1b:60:21:10 to state 3
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: direct probe to 00:17:df:37:9d:90 (try 1/3)
wlan0: direct probe to 00:17:df:37:9d:90 (try 2/3)
wlan0: direct probe to 00:17:df:37:9d:90 (try 3/3)
wlan0: direct probe to 00:17:df:37:9d:90 timed out
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: deauthenticating from 00:14:1b:60:21:10 by local choice (reason=2)
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=25)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
wlan0: moving STA 00:14:1b:60:21:10 to state 3
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: authenticate with 00:14:1b:64:21:10 (try 1)
wlan0: authenticate with 00:14:1b:64:21:10 (try 2)
wlan0: authenticate with 00:14:1b:64:21:10 (try 3)
wlan0: authentication with 00:14:1b:64:21:10 timed out
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: deauthenticating from 00:14:1b:60:21:10 by local choice (reason=2)
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=25)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Calling CRDA for country: CA
cfg80211: Regulatory domain changed to country: CA
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
wlan0: moving STA 00:14:1b:60:21:10 to state 3
wlan0: authenticate with 00:14:1b:60:24:c0 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 0
wlan0: associate with 00:14:1b:60:24:c0 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:24:c0 (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: moving STA 00:14:1b:60:24:c0 to state 1
wlan0: moving STA 00:14:1b:60:24:c0 to state 2
wlan0: moving STA 00:14:1b:60:24:c0 to state 3
wlan0: authenticate with 00:14:1b:60:21:10 (try 1)
wlan0: authenticated
wlan0: moving STA 00:14:1b:60:24:c0 to state 2
wlan0: moving STA 00:14:1b:60:24:c0 to state 1
wlan0: moving STA 00:14:1b:60:24:c0 to state 0
wlan0: associate with 00:14:1b:60:21:10 (try 1)
wlan0: RX ReassocResp from 00:14:1b:60:21:10 (capab=0x431 status=0 aid=6)
wlan0: associated
wlan0: moving STA 00:14:1b:60:21:10 to state 1
wlan0: moving STA 00:14:1b:60:21:10 to state 2
wlan0: moving STA 00:14:1b:60:21:10 to state 3
threaded-ml[14493]: segfault at 8b8 ip 00007f045e2eea69 sp 00007f0429eda918 error 4 in libGL.so.295.33[7f045e2c0000+3c000]