dmesg - M600-2CPU-4GB-1.SOLO
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.el6.x86_64 (mockbuild@sl6.fnal.gov) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Tue Nov 23 06:49:13 CST 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfffb000 (usable)
BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
last_pfn = 0xdfffb max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000dfffb000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfffb000 page 4k
kernel direct mapping tables up to dfffb000 @ 8000-e000
init_memory_mapping: 0000000100000000-0000000120000000
0100000000 - 0120000000 page 2M
kernel direct mapping tables up to 120000000 @ c000-12000
RAMDISK: 37323000 - 37fef6ac
ACPI: RSDP 00000000000f80c0 00014 (v00 BOCHS )
ACPI: RSDT 00000000dfffddc0 00030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000dffffdf0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000dfffdf30 01E4B (v01 BXPC BXDSDT 00000001 INTL 20090123)
ACPI: FACS 00000000dffffd80 00040
ACPI: SSDT 00000000dfffdee0 00044 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 00000000dfffddf0 0007A (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Bootmem setup node 0 0000000000000000-0000000120000000
NODE_DATA [000000000000d000 - 0000000000040fff]
bootmap [0000000000041000 - 0000000000064fff] pages 24
(8 early reservations) ==> bootmem [0000000000 - 0120000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001c9eff8] TEXT DATA BSS ==> [0001000000 - 0001c9eff8]
#3 [0037323000 - 0037fef6ac] RAMDISK ==> [0037323000 - 0037fef6ac]
#4 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
#5 [0001c9f000 - 0001c9f079] BRK ==> [0001c9f000 - 0001c9f079]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
found SMP MP-table at [ffff8800000f8110] f8110
Reserving 129MB of memory at 32MB for crashkernel (System RAM: 4608MB)
kvm-clock: Using msrs 12 and 11
kvm-clock: cpu 0, msr 0:18bf901, boot clock
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00120000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009c
0: 0x00000100 -> 0x000dfffb
0: 0x00100000 -> 0x00120000
On node 0 totalpages: 1048470
DMA zone: 56 pages used for memmap
DMA zone: 107 pages reserved
DMA zone: 3832 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 899123 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 129280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfffb000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000fffbc000
PM: Registered nosave memory: 00000000fffbc000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:1ffbc000)
Booting paravirtualized kernel on KVM
NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s95064 r8192 d23720 u1048576
pcpu-alloc: s95064 r8192 d23720 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
kvm-clock: cpu 0, msr 0:28216901, primary cpu clock
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032235
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
AMD-Vi disabled by default: pass amd_iommu=on to enable
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3909544k/4718592k available (4935k kernel code, 524712k absent, 284336k reserved, 3927k data, 1220k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:424
Console: colour dummy device 80x25
console [ttyS0] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Detected 2992.930 MHz processor.
Calibrating delay loop (skipped) preset value.. 5985.86 BogoMIPS (lpj=2992930)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
mce: CPU supports 10 MCE banks
Performance Events: p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
alternatives: switching to unfair spinlock
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20276 entries in 80 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel QEMU Virtual CPU version (cpu64-rhel6) stepping 03
Booting Node 0, Processors #1 Ok.
kvm-clock: cpu 1, msr 0:28316901, secondary cpu clock
Brought up 2 CPUs
Total of 2 processors activated (11971.72 BogoMIPS).
Testing NMI watchdog ...
WARNING: CPU#0: NMI appears to be stuck (0->0)!
Please report this to bugzilla.kernel.org,
and attach the output of the 'dmesg' command.
WARNING: CPU#1: NMI appears to be stuck (0->0)!
Please report this to bugzilla.kernel.org,
and attach the output of the 'dmesg' command.
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2600 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: your CPUs had inconsistent MTRRdefType settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 20 io port: [0xc000-0xc00f]
pci 0000:00:01.2: reg 20 io port: [0xc020-0xc03f]
pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10 io port: [0xc040-0xc05f]
pci 0000:00:02.0: reg 14 32bit mmio: [0xf0000000-0xf0000fff]
pci 0000:00:02.0: reg 30 32bit mmio pref: [0xf0010000-0xf001ffff]
pci 0000:00:03.0: reg 10 io port: [0xc080-0xc0bf]
pci 0000:00:03.0: reg 14 32bit mmio: [0xf0020000-0xf0020fff]
pci 0000:00:04.0: reg 10 io port: [0xc0c0-0xc0df]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 6 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13105k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1331334879.565:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7661
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 26761D6873307FAB
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:01: setting system clock to 2012-03-09 23:14:39 UTC (1331334879)
Initalizing network drop monitor service
Freeing unused kernel memory: 1220k freed
Write protecting the kernel read-only data: 7176k
dracut: dracut-004-32.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
virtio-pci 0000:00:02.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, high) -> IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 24 for MSI/MSI-X
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 25 for MSI/MSI-X
vda: vda1 vda2 vda3
EXT4-fs (vda3): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/vda3
dracut: Loading SELinux policy
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1331334883.105:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy: No such file or directory
dracut: Switching root
readahead-collector: starting
udev: starting version 147
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:02.0: irq 26 for MSI/MSI-X
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:02.0: irq 27 for MSI/MSI-X
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:02.0: irq 28 for MSI/MSI-X
EXT4-fs (vda1): mounted filesystem with ordered data mode
Adding 1048568k swap on /dev/vda2. Priority:-1 extents:1 across:1048568k
microcode: CPU0 sig=0x6d3, pf=0x1, revision=0x0
platform microcode: firmware: requesting intel-ucode/06-0d-03
microcode: CPU1 sig=0x6d3, pf=0x1, revision=0x0
platform microcode: firmware: requesting intel-ucode/06-0d-03
Microcode Update Driver: v2.00 , Peter Oruba
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
type=1305 audit(1331335186.106:101799): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1
type=1305 audit(1331335186.106:101800): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1
readahead-collector: sorting
readahead-collector: finished
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)