dmesg - test_pbzip2
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-13-generic (buildd@yellow) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #56-Ubuntu SMP Tue Feb 14 12:39:59 UTC 2012 (Ubuntu 2.6.38-13.56-generic 2.6.38.8)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A77D, BIOS 0403 10/21/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ cff8e000-cff90000
[ 0.000000] RAMDISK: 35a1c000 - 36d06000
[ 0.000000] ACPI: RSDP 00000000000fb500 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff90100 00054 (v01 102109 XSDT1612 20091021 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 102109 FACP1612 20091021 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557)
[ 0.000000] ACPI: DSDT 00000000cff90450 0CD3A (v01 A1461 A1461001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cffa8000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 0007C (v01 102109 APIC1612 20091021 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 102109 OEMMCFG 20091021 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 102109 OEMB1612 20091021 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff9f450 00038 (v01 102109 OEMHPET 20091021 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff9f490 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048350
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
[ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s84416 r8192 d22080 u262144
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031320
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 3dfe000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 3968932k/4980736k available (5968k kernel code, 787336k absent, 224468k reserved, 4990k data, 960k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 41943040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3114.093 MHz processor.
[ 0.010004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6228.18 BogoMIPS (lpj=31140930)
[ 0.010008] pid_max: default: 32768 minimum: 301
[ 0.010028] Security Framework initialized
[ 0.010040] AppArmor: AppArmor initialized
[ 0.010042] Yama: becoming mindful.
[ 0.010349] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011676] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012266] Mount-cache hash table entries: 256
[ 0.012368] Initializing cgroup subsys ns
[ 0.012372] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.012374] Initializing cgroup subsys cpuacct
[ 0.012377] Initializing cgroup subsys memory
[ 0.012385] Initializing cgroup subsys devices
[ 0.012387] Initializing cgroup subsys freezer
[ 0.012388] Initializing cgroup subsys net_cls
[ 0.012390] Initializing cgroup subsys blkio
[ 0.012414] tseg: 0000000000
[ 0.012426] CPU: Physical Processor ID: 0
[ 0.012427] CPU: Processor Core ID: 0
[ 0.012428] mce: CPU supports 6 MCE banks
[ 0.013665] ACPI: Core revision 20110112
[ 0.020013] ftrace: allocating 24402 entries in 96 pages
[ 0.030066] Setting APIC routing to flat
[ 0.030358] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.132022] CPU0: AMD Phenom(tm) II X2 550 Processor stepping 03
[ 0.140000] Performance Events: AMD PMU driver.
[ 0.140000] ... version: 0
[ 0.140000] ... bit width: 48
[ 0.140000] ... generic registers: 4
[ 0.140000] ... value mask: 0000ffffffffffff
[ 0.140000] ... max period: 00007fffffffffff
[ 0.140000] ... fixed-purpose events: 0
[ 0.140000] ... event mask: 000000000000000f
[ 0.140000] Booting Node 0, Processors #1
[ 0.300008] Brought up 2 CPUs
[ 0.300010] Total of 2 processors activated (12456.21 BogoMIPS).
[ 0.301265] devtmpfs: initialized
[ 0.301265] print_constraints: dummy:
[ 0.301265] Time: 8:47:35 Date: 02/28/12
[ 0.301265] NET: Registered protocol family 16
[ 0.301265] Trying to unpack rootfs image as initramfs...
[ 0.301265] node 0 link 0: io port [1000, ffffff]
[ 0.301265] TOM: 00000000d0000000 aka 3328M
[ 0.301265] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.301265] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.301265] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.301265] node 0 link 0: mmio [a0000, bffff]
[ 0.301265] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.301265] TOM2: 0000000130000000 aka 4864M
[ 0.301265] bus: [00, 07] on node 0 link 0
[ 0.301265] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.301265] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
[ 0.301265] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.301265] bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
[ 0.301265] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.301265] Extended Config Space enabled on 1 nodes
[ 0.301265] ACPI: bus type pci registered
[ 0.301265] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.301265] PCI: not using MMCONFIG
[ 0.301265] PCI: Using configuration type 1 for base access
[ 0.301265] PCI: Using configuration type 1 for extended access
[ 0.320055] bio: create slab at 0
[ 0.320904] ACPI: EC: Look up EC in DSDT
[ 0.322328] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.420516] ACPI: Interpreter enabled
[ 0.420521] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.420540] ACPI: Using IOAPIC for interrupt routing
[ 0.420560] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.421601] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.442435] ACPI: No dock devices found.
[ 0.442437] HEST: Table not found.
[ 0.442440] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.442501] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.442624] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.442626] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.442628] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.442630] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.442632] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.442634] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.442647] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
[ 0.442690] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.442716] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.442719] pci 0000:00:02.0: PME# disabled
[ 0.442740] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.442766] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.442768] pci 0000:00:0a.0: PME# disabled
[ 0.442797] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.442817] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
[ 0.442826] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
[ 0.442836] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
[ 0.442846] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
[ 0.442855] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
[ 0.442865] pci 0000:00:11.0: reg 24: [mem 0xfcfffc00-0xfcffffff]
[ 0.442910] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.442924] pci 0000:00:12.0: reg 10: [mem 0xfcffe000-0xfcffefff]
[ 0.442988] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.443002] pci 0000:00:12.1: reg 10: [mem 0xfcffd000-0xfcffdfff]
[ 0.443072] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.443091] pci 0000:00:12.2: reg 10: [mem 0xfcfff800-0xfcfff8ff]
[ 0.443162] pci 0000:00:12.2: supports D1 D2
[ 0.443164] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.443167] pci 0000:00:12.2: PME# disabled
[ 0.443188] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.443202] pci 0000:00:13.0: reg 10: [mem 0xfcffc000-0xfcffcfff]
[ 0.443266] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.443280] pci 0000:00:13.1: reg 10: [mem 0xfcffb000-0xfcffbfff]
[ 0.443350] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.443369] pci 0000:00:13.2: reg 10: [mem 0xfcfff400-0xfcfff4ff]
[ 0.443441] pci 0000:00:13.2: supports D1 D2
[ 0.443442] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.443446] pci 0000:00:13.2: PME# disabled
[ 0.443470] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.443566] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.443583] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.443593] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.443602] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.443611] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.443621] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.443671] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.443693] pci 0000:00:14.2: reg 10: [mem 0xfcff4000-0xfcff7fff 64bit]
[ 0.443752] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.443755] pci 0000:00:14.2: PME# disabled
[ 0.443768] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.443845] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.443885] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.443899] pci 0000:00:14.5: reg 10: [mem 0xfcffa000-0xfcffafff]
[ 0.443966] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.443983] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.443997] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.444013] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.444030] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.444083] pci 0000:01:00.0: [10de:0de0] type 0 class 0x000300
[ 0.444093] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.444103] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.444114] pci 0000:01:00.0: reg 1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.444121] pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f]
[ 0.444129] pci 0000:01:00.0: reg 30: [mem 0xfe980000-0xfe9fffff pref]
[ 0.444172] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403
[ 0.444182] pci 0000:01:00.1: reg 10: [mem 0xfe97c000-0xfe97ffff]
[ 0.460021] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.460027] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.460029] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 0.460033] pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.460074] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.460088] pci 0000:02:00.0: reg 10: [io 0xd800-0xd8ff]
[ 0.460109] pci 0000:02:00.0: reg 18: [mem 0xfbfff000-0xfbffffff 64bit pref]
[ 0.460122] pci 0000:02:00.0: reg 20: [mem 0xfbff8000-0xfbffbfff 64bit pref]
[ 0.460131] pci 0000:02:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
[ 0.460162] pci 0000:02:00.0: supports D1 D2
[ 0.460163] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.460167] pci 0000:02:00.0: PME# disabled
[ 0.480020] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.480025] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.480028] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.480031] pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
[ 0.480069] pci 0000:03:06.0: [1106:3038] type 0 class 0x000c03
[ 0.480133] pci 0000:03:06.0: reg 20: [io 0xec00-0xec1f]
[ 0.480179] pci 0000:03:06.0: supports D1 D2
[ 0.480181] pci 0000:03:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.480186] pci 0000:03:06.0: PME# disabled
[ 0.480208] pci 0000:03:06.2: [1106:3104] type 0 class 0x000c03
[ 0.480230] pci 0000:03:06.2: reg 10: [mem 0xfebffc00-0xfebffcff]
[ 0.480316] pci 0000:03:06.2: supports D1 D2
[ 0.480317] pci 0000:03:06.2: PME# supported from D0 D1 D2 D3hot
[ 0.480321] pci 0000:03:06.2: PME# disabled
[ 0.480351] pci 0000:03:08.0: [1106:3044] type 0 class 0x000c00
[ 0.480374] pci 0000:03:08.0: reg 10: [mem 0xfebff000-0xfebff7ff]
[ 0.480387] pci 0000:03:08.0: reg 14: [io 0xe880-0xe8ff]
[ 0.480469] pci 0000:03:08.0: supports D2
[ 0.480470] pci 0000:03:08.0: PME# supported from D2 D3hot D3cold
[ 0.480475] pci 0000:03:08.0: PME# disabled
[ 0.480518] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.480522] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.480526] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.480530] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.480533] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.480535] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.480537] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.480539] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.480541] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.480543] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.480559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.480713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.480741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.480776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.480832] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.483664] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[ 0.483694] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.483721] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.483747] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.483774] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.483800] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
[ 0.483826] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.483852] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.483941] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.483944] vgaarb: loaded
[ 0.484069] SCSI subsystem initialized
[ 0.484123] libata version 3.00 loaded.
[ 0.484157] usbcore: registered new interface driver usbfs
[ 0.484164] usbcore: registered new interface driver hub
[ 0.484183] usbcore: registered new device driver usb
[ 0.484317] wmi: Mapper loaded
[ 0.484318] PCI: Using ACPI for IRQ routing
[ 0.484321] PCI: pci_cache_line_size set to 64 bytes
[ 0.484401] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.484403] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.484475] NetLabel: Initializing
[ 0.484476] NetLabel: domain hash size = 128
[ 0.484477] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.484487] NetLabel: unlabeled traffic allowed by default
[ 0.484514] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.484518] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.486538] Switching to clocksource hpet
[ 0.486810] Switched to NOHz mode on CPU #0
[ 0.486716] Switched to NOHz mode on CPU #1
[ 0.486716] AppArmor: AppArmor Filesystem Enabled
[ 0.486716] pnp: PnP ACPI init
[ 0.486716] ACPI: bus type pnp registered
[ 0.486716] pnp 00:00: [bus 00-ff]
[ 0.486716] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.486716] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.486716] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.486716] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.486716] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.486716] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.486716] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.486716] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.486716] pnp 00:01: [dma 4]
[ 0.486716] pnp 00:01: [io 0x0000-0x000f]
[ 0.486716] pnp 00:01: [io 0x0081-0x0083]
[ 0.486716] pnp 00:01: [io 0x0087]
[ 0.486716] pnp 00:01: [io 0x0089-0x008b]
[ 0.486716] pnp 00:01: [io 0x008f]
[ 0.486716] pnp 00:01: [io 0x00c0-0x00df]
[ 0.486716] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.486716] pnp 00:02: [io 0x0070-0x0071]
[ 0.486716] pnp 00:02: [irq 8]
[ 0.486716] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.486716] pnp 00:03: [io 0x0061]
[ 0.486716] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.486716] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.486716] pnp 00:04: [irq 13]
[ 0.486716] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.486716] pnp 00:05: [io 0x0378-0x037f]
[ 0.486716] pnp 00:05: [irq 7]
[ 0.486716] pnp 00:05: [dma 0 disabled]
[ 0.486716] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.486716] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.486716] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.486716] pnp 00:07: [io 0x0060]
[ 0.486716] pnp 00:07: [io 0x0064]
[ 0.486716] pnp 00:07: [irq 1]
[ 0.486716] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.486716] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.486716] pnp 00:08: [irq 4]
[ 0.486716] pnp 00:08: [dma 0 disabled]
[ 0.486716] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.486716] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.486716] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.486716] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.486716] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.486716] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.486716] pnp 00:0a: [io 0x0010-0x001f]
[ 0.486716] pnp 00:0a: [io 0x0022-0x003f]
[ 0.486716] pnp 00:0a: [io 0x0062-0x0063]
[ 0.486716] pnp 00:0a: [io 0x0065-0x006f]
[ 0.486716] pnp 00:0a: [io 0x0072-0x007f]
[ 0.486716] pnp 00:0a: [io 0x0080]
[ 0.486716] pnp 00:0a: [io 0x0084-0x0086]
[ 0.486716] pnp 00:0a: [io 0x0088]
[ 0.486716] pnp 00:0a: [io 0x008c-0x008e]
[ 0.486716] pnp 00:0a: [io 0x0090-0x009f]
[ 0.486716] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.486716] pnp 00:0a: [io 0x00b1]
[ 0.486716] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.486716] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.486716] pnp 00:0a: [io 0x040b]
[ 0.486716] pnp 00:0a: [io 0x04d6]
[ 0.486716] pnp 00:0a: [io 0x0c00-0x0c01]
[ 0.486716] pnp 00:0a: [io 0x0c14]
[ 0.486716] pnp 00:0a: [io 0x0c50-0x0c51]
[ 0.486716] pnp 00:0a: [io 0x0c52]
[ 0.486716] pnp 00:0a: [io 0x0c6c]
[ 0.486716] pnp 00:0a: [io 0x0c6f]
[ 0.486716] pnp 00:0a: [io 0x0cd0-0x0cd1]
[ 0.486716] pnp 00:0a: [io 0x0cd2-0x0cd3]
[ 0.486716] pnp 00:0a: [io 0x0cd4-0x0cd5]
[ 0.486716] pnp 00:0a: [io 0x0cd6-0x0cd7]
[ 0.486716] pnp 00:0a: [io 0x0cd8-0x0cdf]
[ 0.486716] pnp 00:0a: [io 0x0b00-0x0b3f]
[ 0.486716] pnp 00:0a: [io 0x0800-0x089f]
[ 0.486716] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.486716] pnp 00:0a: [io 0x0b00-0x0b0f]
[ 0.486716] pnp 00:0a: [io 0x0b20-0x0b3f]
[ 0.486716] pnp 00:0a: [io 0x0900-0x090f]
[ 0.486716] pnp 00:0a: [io 0x0910-0x091f]
[ 0.486716] pnp 00:0a: [io 0xfe00-0xfefe]
[ 0.486716] pnp 00:0a: [io 0x0060-0x005f disabled]
[ 0.486716] pnp 00:0a: [io 0x0064-0x0063 disabled]
[ 0.486716] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[ 0.486716] pnp 00:0a: [mem 0xfec10000-0xfec1001f]
[ 0.486716] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.486716] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.486716] system 00:0a: [io 0x040b] has been reserved
[ 0.486716] system 00:0a: [io 0x04d6] has been reserved
[ 0.486716] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.486716] system 00:0a: [io 0x0c14] has been reserved
[ 0.486716] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.486716] system 00:0a: [io 0x0c52] has been reserved
[ 0.486716] system 00:0a: [io 0x0c6c] has been reserved
[ 0.486716] system 00:0a: [io 0x0c6f] has been reserved
[ 0.486716] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.486716] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.486716] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.486716] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.486716] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.486716] system 00:0a: [io 0x0b00-0x0b3f] has been reserved
[ 0.486716] system 00:0a: [io 0x0800-0x089f] has been reserved
[ 0.486716] system 00:0a: [io 0x0b00-0x0b0f] has been reserved
[ 0.486716] system 00:0a: [io 0x0b20-0x0b3f] has been reserved
[ 0.486716] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.486716] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.486716] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.486716] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.486716] system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.486716] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.486716] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.486716] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.486716] pnp 00:0b: [io 0x0230-0x023f]
[ 0.486716] pnp 00:0b: [io 0x0290-0x029f]
[ 0.486716] pnp 00:0b: [io 0x0300-0x030f]
[ 0.486716] pnp 00:0b: [io 0x0a30-0x0a3f]
[ 0.486728] system 00:0b: [io 0x0230-0x023f] has been reserved
[ 0.486730] system 00:0b: [io 0x0290-0x029f] has been reserved
[ 0.486732] system 00:0b: [io 0x0300-0x030f] has been reserved
[ 0.486734] system 00:0b: [io 0x0a30-0x0a3f] has been reserved
[ 0.486736] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.486758] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.486790] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.486792] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.486870] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.486872] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.486873] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.486875] pnp 00:0d: [mem 0x00100000-0xcfffffff]
[ 0.486876] pnp 00:0d: [mem 0xfec00000-0xffffffff]
[ 0.486913] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.486915] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.486917] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.486919] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.486921] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.486923] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.486995] pnp: PnP ACPI: found 14 devices
[ 0.486997] ACPI: ACPI bus type pnp unregistered
[ 0.492639] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.492642] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff]
[ 0.492645] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe9fffff]
[ 0.492648] pci 0000:00:02.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.492651] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 0.492653] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.492656] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.492659] pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
[ 0.492663] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.492666] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.492671] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.492675] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.492690] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.492694] pci 0000:00:02.0: setting latency timer to 64
[ 0.492698] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.492701] pci 0000:00:0a.0: setting latency timer to 64
[ 0.492707] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.492709] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.492711] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.492713] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.492714] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.492716] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.492718] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.492720] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe9fffff]
[ 0.492722] pci_bus 0000:01: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[ 0.492724] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.492726] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.492728] pci_bus 0000:02: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
[ 0.492730] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.492731] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.492733] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.492735] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.492736] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.492738] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.492740] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.492742] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.492769] NET: Registered protocol family 2
[ 0.492886] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.493808] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.496372] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.496692] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.496694] TCP reno registered
[ 0.496702] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.496737] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.496843] NET: Registered protocol family 1
[ 0.662560] Freeing initrd memory: 19368k freed
[ 0.680075] pci 0000:01:00.0: Boot video device
[ 0.680140] PCI: CLS 64 bytes, default 64
[ 0.681151] PCI-DMA: Disabling AGP.
[ 0.681223] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.681224] PCI-DMA: using GART IOMMU.
[ 0.681226] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.684621] audit: initializing netlink socket (disabled)
[ 0.684630] type=2000 audit(1330418855.680:1): initialized
[ 0.694590] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.695802] VFS: Disk quotas dquot_6.5.2
[ 0.695841] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.696291] fuse init (API version 7.16)
[ 0.696360] msgmni has been set to 7918
[ 0.696584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.696614] io scheduler noop registered
[ 0.696616] io scheduler deadline registered
[ 0.696645] io scheduler cfq registered (default)
[ 0.696752] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.696780] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.696848] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.696870] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.696928] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.696944] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.697038] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.697042] ACPI: Power Button [PWRB]
[ 0.697071] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.697073] ACPI: Power Button [PWRF]
[ 0.697180] ACPI: acpi_idle registered with cpuidle
[ 0.698992] ERST: Table is not found!
[ 0.719687] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.000744] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.000958] Linux agpgart interface v0.103
[ 1.001639] brd: module loaded
[ 1.001959] loop: module loaded
[ 1.002014] i2c-core: driver [adp5520] using legacy suspend method
[ 1.002015] i2c-core: driver [adp5520] using legacy resume method
[ 1.002148] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.002171] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.002405] Fixed MDIO Bus: probed
[ 1.002424] PPP generic driver version 2.4.2
[ 1.002447] tun: Universal TUN/TAP device driver, 1.6
[ 1.002448] tun: (C) 1999-2004 Max Krasnyansky
[ 1.002499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.002537] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.002554] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.002594] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.030055] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.030078] ehci_hcd 0000:00:12.2: debug port 1
[ 1.030098] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfcfff800
[ 1.050029] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.050121] hub 1-0:1.0: USB hub found
[ 1.050124] hub 1-0:1.0: 6 ports detected
[ 1.050228] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.050239] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.050266] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.050292] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.050311] ehci_hcd 0000:00:13.2: debug port 1
[ 1.050329] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfcfff400
[ 1.070029] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.070104] hub 2-0:1.0: USB hub found
[ 1.070106] hub 2-0:1.0: 6 ports detected
[ 1.070213] ehci_hcd 0000:03:06.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 1.070225] ehci_hcd 0000:03:06.2: EHCI Host Controller
[ 1.070251] ehci_hcd 0000:03:06.2: new USB bus registered, assigned bus number 3
[ 1.070309] ehci_hcd 0000:03:06.2: irq 23, io mem 0xfebffc00
[ 1.090029] ehci_hcd 0000:03:06.2: USB 2.0 started, EHCI 1.00
[ 1.090114] hub 3-0:1.0: USB hub found
[ 1.090116] hub 3-0:1.0: 2 ports detected
[ 1.090185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.090226] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.090239] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.090265] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.090302] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfcffe000
[ 1.154124] hub 4-0:1.0: USB hub found
[ 1.154130] hub 4-0:1.0: 3 ports detected
[ 1.154234] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.154245] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.154272] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 5
[ 1.154303] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfcffd000
[ 1.214107] hub 5-0:1.0: USB hub found
[ 1.214113] hub 5-0:1.0: 3 ports detected
[ 1.214219] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.214231] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.214262] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.214300] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfcffc000
[ 1.274104] hub 6-0:1.0: USB hub found
[ 1.274109] hub 6-0:1.0: 3 ports detected
[ 1.274215] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.274226] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.274251] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 7
[ 1.274283] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfcffb000
[ 1.334103] hub 7-0:1.0: USB hub found
[ 1.334109] hub 7-0:1.0: 3 ports detected
[ 1.334223] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.334235] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.334261] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 1.340051] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfcffa000
[ 1.370039] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 1.404110] hub 8-0:1.0: USB hub found
[ 1.404115] hub 8-0:1.0: 2 ports detected
[ 1.404195] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.404266] uhci_hcd 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.404273] uhci_hcd 0000:03:06.0: UHCI Host Controller
[ 1.404300] uhci_hcd 0000:03:06.0: new USB bus registered, assigned bus number 9
[ 1.404349] uhci_hcd 0000:03:06.0: irq 21, io base 0x0000ec00
[ 1.404430] hub 9-0:1.0: USB hub found
[ 1.404433] hub 9-0:1.0: 2 ports detected
[ 1.450054] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.450056] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.450173] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.450222] mousedev: PS/2 mouse device common for all mice
[ 1.450288] rtc_cmos 00:02: RTC can wake from S4
[ 1.467759] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.490085] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.490109] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.490181] device-mapper: uevent: version 1.0.3
[ 1.490228] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.490297] device-mapper: multipath: version 1.2.0 loaded
[ 1.490299] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.490390] cpuidle: using governor ladder
[ 1.490393] cpuidle: using governor menu
[ 1.490560] TCP cubic registered
[ 1.490638] NET: Registered protocol family 10
[ 1.490970] NET: Registered protocol family 17
[ 1.490981] Registering the dns_resolver key type
[ 1.491002] powernow-k8: Found 1 AMD Phenom(tm) II X2 550 Processor (2 cpu cores) (version 2.20.00)
[ 1.491028] powernow-k8: 0 : pstate 0 (3100 MHz)
[ 1.491030] powernow-k8: 1 : pstate 1 (2400 MHz)
[ 1.491031] powernow-k8: 2 : pstate 2 (1900 MHz)
[ 1.491032] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.491445] PM: Hibernation image not present or could not be loaded.
[ 1.491452] registered taskstats version 1
[ 1.491675] Magic number: 0:163:777
[ 1.491696] misc rfkill: hash matches
[ 1.491737] rtc_cmos 00:02: setting system clock to 2012-02-28 08:47:37 UTC (1330418857)
[ 1.491739] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.491740] EDD information not available.
[ 1.492951] Freeing unused kernel memory: 960k freed
[ 1.493156] Write protecting the kernel read-only data: 10240k
[ 1.493637] Freeing unused kernel memory: 156k freed
[ 1.497169] Freeing unused kernel memory: 1432k freed
[ 1.510801] ramzswap: disk size not provided. You can use disksize_kb module param to specify size.
[ 1.510802] Using default: (25% of RAM).
[ 1.510804] ramzswap: disk size set to 1014200 kB
[ 1.514517] udev[110]: starting version 167
[ 1.567881] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.567903] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.567936] r8169 0000:02:00.0: setting latency timer to 64
[ 1.567979] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.568301] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90000674000, 90:e6:ba:c5:a9:4f, XID 083000c0 IRQ 42
[ 1.578126] firewire_ohci 0000:03:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.579008] scsi0 : pata_atiixp
[ 1.580822] scsi1 : pata_atiixp
[ 1.581269] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.581271] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.650097] firewire_ohci: Added fw-ohci device 0000:03:08.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 1.680037] Refined TSC clocksource calibration: 3113.979 MHz.
[ 1.680042] Switching to clocksource tsc
[ 1.754488] ahci 0000:00:11.0: version 3.0
[ 1.754507] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.754626] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.754629] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.755310] scsi2 : ahci
[ 1.755368] scsi3 : ahci
[ 1.755417] scsi4 : ahci
[ 1.755464] scsi5 : ahci
[ 1.755512] scsi6 : ahci
[ 1.755559] scsi7 : ahci
[ 1.755598] ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 22
[ 1.755601] ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 22
[ 1.755604] ata5: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 22
[ 1.755606] ata6: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 22
[ 1.755609] ata7: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcffff00 irq 22
[ 1.755612] ata8: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcffff80 irq 22
[ 1.910025] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 2.100062] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.100097] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.150073] firewire_core: created device fw0: GUID 001e8c000023cbec, S400
[ 2.300036] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.300059] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.300082] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.300316] ata6.00: ATA-8: INTEL SSDSA2CW080G3, 4PC10362, max UDMA/133
[ 2.300318] ata6.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.300619] ata6.00: configured for UDMA/133
[ 2.302089] ata5.00: ATA-8: WDC WD1001FALS-00E3A0, 05.01D05, max UDMA/133
[ 2.302091] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.303049] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL02, max UDMA/100
[ 2.304121] ata5.00: configured for UDMA/133
[ 2.306867] ata3.00: configured for UDMA/100
[ 2.315486] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL02 PQ: 0 ANSI: 5
[ 2.323890] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.323893] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.323986] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.324029] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.370022] usb 5-3: new low speed USB device using ohci_hcd and address 2
[ 2.420031] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.422346] ata4.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[ 2.422348] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.424124] ata4.00: configured for UDMA/133
[ 2.424211] scsi 3:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[ 2.424304] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.424315] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.424334] sd 3:0:0:0: [sda] Write Protect is off
[ 2.424336] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.424356] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.424381] scsi 4:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 2.424474] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.424551] scsi 5:0:0:0: Direct-Access ATA INTEL SSDSA2CW08 4PC1 PQ: 0 ANSI: 5
[ 2.424649] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 2.424702] sd 5:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.424711] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.424763] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.424765] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.424784] sd 5:0:0:0: [sdc] Write Protect is off
[ 2.424786] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.424790] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.424813] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.425364] sdc: sdc1 sdc2
[ 2.425569] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 2.444307] sda: sda1
[ 2.444497] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.460197] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 > sdb4
[ 2.460465] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.577145] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb5/5-3/5-3:1.0/input/input3
[ 2.577223] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.1-3/input0
[ 2.577236] usbcore: registered new interface driver usbhid
[ 2.577237] usbhid: USB HID core driver
[ 2.982990] vesafb: framebuffer at 0xd7000000, mapped to 0xffffc90011880000, using 3072k, total 3072k
[ 2.982993] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 2.982995] vesafb: scrolling: redraw
[ 2.982997] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.983069] Console: switching to colour frame buffer device 128x48
[ 2.983083] fb0: VESA VGA frame buffer device
[ 3.173772] Btrfs loaded
[ 3.176879] xor: automatically using best checksumming function: generic_sse
[ 3.220008] generic_sse: 12767.600 MB/sec
[ 3.220010] xor: using function: generic_sse (12767.600 MB/sec)
[ 3.221610] device-mapper: dm-raid45: initialized v0.2594b
[ 8.605157] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.970924] Adding 3999740k swap on /dev/sdb5. Priority:-1 extents:1 across:3999740k
[ 12.004808] udev[510]: starting version 167
[ 12.006017] lp: driver loaded but no devices found
[ 12.044027] EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro,user_xattr
[ 12.109109] EXT3-fs: barriers not enabled
[ 12.123542] kjournald starting. Commit interval 5 seconds
[ 12.123681] EXT3-fs (sdb4): warning: maximal mount count reached, running e2fsck is recommended
[ 12.123924] EXT3-fs (sdb4): using internal journal
[ 12.123927] EXT3-fs (sdb4): mounted filesystem with ordered data mode
[ 12.161875] MCE: In-kernel MCE decoding enabled.
[ 12.164814] EDAC MC: Ver: 2.1.0 Feb 14 2012
[ 12.188963] parport_pc 00:05: reported by Plug and Play ACPI
[ 12.189017] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 12.198158] EDAC amd64_edac: v3.3.0
[ 12.199683] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 12.199685] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.200922] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 12.201008] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 12.207241] EDAC amd64: DRAM ECC disabled.
[ 12.207247] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 12.207248] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 12.207249] (Note that use of the override may cause unknown side effects.)
[ 12.212334] type=1400 audit(1330415268.209:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=893 comm="apparmor_parser"
[ 12.212609] type=1400 audit(1330415268.209:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=893 comm="apparmor_parser"
[ 12.212774] type=1400 audit(1330415268.209:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=893 comm="apparmor_parser"
[ 12.214658] type=1400 audit(1330415268.209:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=900 comm="apparmor_parser"
[ 12.261855] lp0: using parport0 (interrupt-driven).
[ 12.435452] ppdev: user-space parallel port driver
[ 12.439479] nvidia: module license 'NVIDIA' taints kernel.
[ 12.439482] Disabling lock debugging due to kernel taint
[ 12.494810] IR NEC protocol handler initialized
[ 12.498469] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.500164] IR RC5(x) protocol handler initialized
[ 12.509542] IR RC6 protocol handler initialized
[ 12.512793] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.512803] nvidia 0000:01:00.0: setting latency timer to 64
[ 12.512807] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.513149] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012
[ 12.515398] dib0700: loaded with support for 15 different device-types
[ 12.516098] dvb-usb: found a 'Hauppauge Nova-TD-500 (84xxx)' in cold state, will try to load a firmware
[ 12.517096] IR JVC protocol handler initialized
[ 12.521607] IR Sony protocol handler initialized
[ 12.521633] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 12.524016] lirc_dev: IR Remote Control driver registered, major 249
[ 12.524880] IR LIRC bridge handler initialized
[ 12.542630] Linux video capture interface: v2.00
[ 12.550117] hda-intel: Enable sync_write for AMD chipset
[ 12.585598] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 12.585602] hda_intel: Disable MSI for Nvidia chipset
[ 12.585641] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 12.593809] set resolution quirk: cval->res = 384
[ 12.593968] usbcore: registered new interface driver snd-usb-audio
[ 12.594239] uvcvideo: Found UVC 1.00 device (046d:0809)
[ 12.608945] input: UVC Camera (046d:0809) as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input4
[ 12.608994] usbcore: registered new interface driver uvcvideo
[ 12.608996] USB Video Class driver (v1.0.0)
[ 12.734811] dib0700: firmware started successfully.
[ 13.240148] dvb-usb: found a 'Hauppauge Nova-TD-500 (84xxx)' in warm state.
[ 13.240194] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.240272] DVB: registering new adapter (Hauppauge Nova-TD-500 (84xxx))
[ 13.495815] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 13.717096] DiB0070: successfully identified
[ 13.717098] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 13.717213] DVB: registering new adapter (Hauppauge Nova-TD-500 (84xxx))
[ 13.876246] DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
[ 14.097278] DiB0070: successfully identified
[ 14.120024] Registered IR keymap rc-dib0700-rc5
[ 14.120112] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.4/0000:03:06.2/usb3/3-1/rc/rc0/input5
[ 14.120150] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.4/0000:03:06.2/usb3/3-1/rc/rc0
[ 14.120269] dvb-usb: schedule remote query interval to 50 msecs.
[ 14.120271] dvb-usb: Hauppauge Nova-TD-500 (84xxx) successfully initialized and connected.
[ 14.120858] usbcore: registered new interface driver dvb_usb_dib0700
[ 20.281094] type=1400 audit(1330415276.279:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1466 comm="apparmor_parser"
[ 20.285529] type=1400 audit(1330415276.279:7): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1467 comm="apparmor_parser"
[ 20.290410] type=1400 audit(1330415276.289:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1466 comm="apparmor_parser"
[ 20.290581] type=1400 audit(1330415276.289:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1466 comm="apparmor_parser"
[ 20.293367] type=1400 audit(1330415276.289:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1490 comm="apparmor_parser"
[ 20.294295] type=1400 audit(1330415276.289:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1490 comm="apparmor_parser"
[ 20.297123] type=1400 audit(1330415276.289:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1492 comm="apparmor_parser"
[ 20.301174] type=1400 audit(1330415276.299:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1493 comm="apparmor_parser"
[ 20.301348] type=1400 audit(1330415276.299:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1493 comm="apparmor_parser"
[ 20.301816] type=1400 audit(1330415276.299:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1467 comm="apparmor_parser"
[ 20.365419] r8169 0000:02:00.0: eth0: link down
[ 20.365427] r8169 0000:02:00.0: eth0: link down
[ 20.381518] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.566656] S38zfs-fuse (1574): /proc/1584/oom_adj is deprecated, please use /proc/1584/oom_score_adj instead.
[ 21.089364] vboxdrv: Found 2 processor cores.
[ 21.089586] vboxdrv: fAsync=0 offMin=0x65e offMax=0x1183
[ 21.089638] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 21.089640] vboxdrv: Successfully loaded version 4.1.8 (interface 0x00190000).
[ 21.304042] vboxpci: IOMMU not found (not registered)
[ 21.744968] EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 22.126019] r8169 0000:02:00.0: eth0: link up
[ 22.126410] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.287715] EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 25.704701] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
[ 1826.203413] process `skype' is using obsolete setsockopt SO_BSDCOMPAT