dmesg - test1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:04:25 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0E0000000 mask FF8000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 2f7e2000 - 3003350d
[ 0.000000] ACPI: RSDP 000fa9f0 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 3fff0000 0002C (v01 AMIINT VIA_K7 00000010 MSFT 00000097)
[ 0.000000] ACPI: FACP 3fff0030 00081 (v01 AMIINT VIA_K7 00000011 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3fff0120 03718 (v01 VIA VIA_K7 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 3fff8000 00040
[ 0.000000] ACPI: APIC 3fff00c0 00054 (v01 AMIINT VIA_K7 00000009 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 139MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccd2c] TEXT DATA BSS ==> [0001000000 - 00014ccd2c]
[ 0.000000] #4 [002f7e2000 - 003003350d] RAMDISK ==> [002f7e2000 - 003003350d]
[ 0.000000] #5 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000]
[ 0.000000] #6 [00014cd000 - 00014d3108] BRK ==> [00014cd000 - 00014d3108]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00fb990] fb990
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c13b48c0, node_mem_map c14d5200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 280 pages used for memmap
[ 0.000000] HighMem zone: 35546 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34328 r0 d23016 u4194304
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003fff0)
[ 0.000000] Memory: 1025112k/1048512k available (2506k kernel code, 22564k reserved, 1326k data, 380k init, 143304k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1272a57 - 0xc13be4c4 (1326 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272a57 (2506 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2093.830 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4187.66 BogoMIPS (lpj=8375320)
[ 0.004033] Security Framework initialized
[ 0.004044] SELinux: Disabled at boot.
[ 0.004055] Mount-cache hash table entries: 512
[ 0.004242] Initializing cgroup subsys ns
[ 0.004247] Initializing cgroup subsys cpuacct
[ 0.004252] Initializing cgroup subsys devices
[ 0.004256] Initializing cgroup subsys freezer
[ 0.004260] Initializing cgroup subsys net_cls
[ 0.004293] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004296] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004302] mce: CPU supports 4 MCE banks
[ 0.004331] Performance Events: AMD PMU driver.
[ 0.004339] ... version: 0
[ 0.004341] ... bit width: 48
[ 0.004343] ... generic registers: 4
[ 0.004345] ... value mask: 0000ffffffffffff
[ 0.004348] ... max period: 00007fffffffffff
[ 0.004350] ... fixed-purpose events: 0
[ 0.004352] ... event mask: 000000000000000f
[ 0.004357] Checking 'hlt' instruction... OK.
[ 0.020350] SMP alternatives: switching to UP code
[ 0.023984] Freeing SMP alternatives: 13k freed
[ 0.024017] ACPI: Core revision 20090903
[ 0.029026] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.030219] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069902] CPU0: AMD Athlon(tm) XP 2800+ stepping 00
[ 0.072001] Brought up 1 CPUs
[ 0.072001] Total of 1 processors activated (4187.66 BogoMIPS).
[ 0.072001] CPU0 attaching NULL sched-domain.
[ 0.072001] devtmpfs: initialized
[ 0.072001] regulator: core version 0.5
[ 0.072001] NET: Registered protocol family 16
[ 0.072001] ACPI: bus type pci registered
[ 0.072001] PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1
[ 0.072001] PCI: Using configuration type 1 for base access
[ 0.072001] bio: create slab at 0
[ 0.072021] ACPI: EC: Look up EC in DSDT
[ 0.077369] ACPI: Interpreter enabled
[ 0.077373] ACPI: (supports S0 S1 S4 S5)
[ 0.077393] ACPI: Using IOAPIC for interrupt routing
[ 0.081491] ACPI: Power Resource [URP1] (off)
[ 0.081523] ACPI: Power Resource [URP2] (off)
[ 0.081554] ACPI: Power Resource [FDDP] (off)
[ 0.081585] ACPI: Power Resource [LPTP] (off)
[ 0.081713] ACPI: No dock devices found.
[ 0.081845] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.081896] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.081977] pci 0000:00:01.0: supports D1
[ 0.082014] pci 0000:00:0b.0: reg 10 32bit mmio: [0xdfff8000-0xdfff9fff]
[ 0.082049] pci 0000:00:0b.0: supports D1 D2
[ 0.082051] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.082056] pci 0000:00:0b.0: PME# disabled
[ 0.082089] pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]
[ 0.082095] pci 0000:00:0f.0: reg 14 io port: [0xe800-0xe803]
[ 0.082102] pci 0000:00:0f.0: reg 18 io port: [0xe400-0xe407]
[ 0.082108] pci 0000:00:0f.0: reg 1c io port: [0xe000-0xe003]
[ 0.082115] pci 0000:00:0f.0: reg 20 io port: [0xdc00-0xdc0f]
[ 0.082121] pci 0000:00:0f.0: reg 24 io port: [0xd800-0xd8ff]
[ 0.082183] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.082253] pci 0000:00:10.0: reg 20 io port: [0xc800-0xc81f]
[ 0.082275] pci 0000:00:10.0: supports D1 D2
[ 0.082277] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.082281] pci 0000:00:10.0: PME# disabled
[ 0.082326] pci 0000:00:10.1: reg 20 io port: [0xcc00-0xcc1f]
[ 0.082348] pci 0000:00:10.1: supports D1 D2
[ 0.082350] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.082354] pci 0000:00:10.1: PME# disabled
[ 0.082396] pci 0000:00:10.2: reg 20 io port: [0xd000-0xd01f]
[ 0.082418] pci 0000:00:10.2: supports D1 D2
[ 0.082420] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.082425] pci 0000:00:10.2: PME# disabled
[ 0.082466] pci 0000:00:10.3: reg 20 io port: [0xd400-0xd41f]
[ 0.082488] pci 0000:00:10.3: supports D1 D2
[ 0.082490] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.082494] pci 0000:00:10.3: PME# disabled
[ 0.082523] pci 0000:00:10.4: reg 10 32bit mmio: [0xdfffbe00-0xdfffbeff]
[ 0.082558] pci 0000:00:10.4: supports D1 D2
[ 0.082561] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.082565] pci 0000:00:10.4: PME# disabled
[ 0.082620] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.082668] pci 0000:00:11.5: reg 10 io port: [0xc400-0xc4ff]
[ 0.082706] pci 0000:00:11.5: supports D1 D2
[ 0.082755] pci 0000:01:00.0: reg 10 32bit mmio: [0xde000000-0xdeffffff]
[ 0.082761] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.082777] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfee0000-0xdfefffff]
[ 0.082827] pci 0000:00:01.0: bridge 32bit mmio: [0xdde00000-0xdfefffff]
[ 0.082832] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcdd00000-0xddcfffff]
[ 0.082839] pci_bus 0000:00: on NUMA node 0
[ 0.082844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.085056] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.085163] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.085267] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.085370] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 0.085473] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.085576] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.085679] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.085783] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.085897] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.085900] vgaarb: loaded
[ 0.085971] PCI: Using ACPI for IRQ routing
[ 0.086140] Switching to clocksource tsc
[ 0.087730] pnp: PnP ACPI init
[ 0.087749] ACPI: bus type pnp registered
[ 0.088783] pnp: PnP ACPI: found 11 devices
[ 0.088786] ACPI: ACPI bus type pnp unregistered
[ 0.088791] PnPBIOS: Disabled by ACPI PNP
[ 0.088806] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.088810] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 0.088813] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.088817] system 00:01: ioport range 0x400-0x40f has been reserved
[ 0.088820] system 00:01: ioport range 0x820-0x821 has been reserved
[ 0.088825] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.123611] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.123614] pci 0000:00:01.0: IO window: disabled
[ 0.123619] pci 0000:00:01.0: MEM window: 0xdde00000-0xdfefffff
[ 0.123624] pci 0000:00:01.0: PREFETCH window: 0xcdd00000-0xddcfffff
[ 0.123641] pci 0000:00:01.0: setting latency timer to 64
[ 0.123647] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.123650] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.123653] pci_bus 0000:01: resource 1 mem: [0xdde00000-0xdfefffff]
[ 0.123656] pci_bus 0000:01: resource 2 pref mem [0xcdd00000-0xddcfffff]
[ 0.123702] NET: Registered protocol family 2
[ 0.123812] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.124383] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.126342] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.127346] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.127349] TCP reno registered
[ 0.127483] NET: Registered protocol family 1
[ 0.127508] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.127592] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 0.127607] pci 0000:01:00.0: Boot video device
[ 0.127686] Unpacking initramfs...
[ 0.377840] Freeing initrd memory: 8517k freed
[ 0.392010] audit: initializing netlink socket (disabled)
[ 0.392032] type=2000 audit(1328975516.389:1): initialized
[ 0.395600] highmem bounce pool size: 64 pages
[ 0.395606] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.397332] VFS: Disk quotas dquot_6.5.2
[ 0.397405] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.397493] msgmni has been set to 1739
[ 0.397738] alg: No test for stdrng (krng)
[ 0.397771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.397774] io scheduler noop registered
[ 0.397777] io scheduler anticipatory registered
[ 0.397779] io scheduler deadline registered
[ 0.397822] io scheduler cfq registered (default)
[ 0.398048] isapnp: Scanning for PnP cards...
[ 0.751341] isapnp: No Plug & Play device found
[ 0.752897] Linux agpgart interface v0.103
[ 0.753023] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 0.760808] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 0.760941] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.761040] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.761340] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.761462] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.761613] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.761616] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.761755] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.761863] mice: PS/2 mouse device common for all mice
[ 0.761928] rtc_cmos 00:03: RTC can wake from S4
[ 0.761978] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.762024] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.762037] cpuidle: using governor ladder
[ 0.762040] cpuidle: using governor menu
[ 0.762046] No iBFT detected.
[ 0.762500] TCP cubic registered
[ 0.762658] NET: Registered protocol family 10
[ 0.763536] Mobile IPv6
[ 0.763539] NET: Registered protocol family 17
[ 0.763559] Using IPI No-Shortcut mode
[ 0.763637] PM: Resume from disk failed.
[ 0.763654] registered taskstats version 1
[ 0.763918] rtc_cmos 00:03: setting system clock to 2012-02-11 15:51:57 UTC (1328975517)
[ 0.763971] Initalizing network drop monitor service
[ 0.764007] Freeing unused kernel memory: 380k freed
[ 0.764541] Write protecting the kernel text: 2508k
[ 0.764563] Write protecting the kernel read-only data: 920k
[ 0.786156] udev[46]: starting version 164
[ 0.788076] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.994323] SCSI subsystem initialized
[ 1.025117] libata version 3.00 loaded.
[ 1.049079] Floppy drive(s): fd0 is 1.44M
[ 1.050401] usbcore: registered new interface driver usbfs
[ 1.050577] usbcore: registered new interface driver hub
[ 1.050745] usbcore: registered new device driver usb
[ 1.058425] pata_via 0000:00:0f.1: version 0.3.4
[ 1.058460] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.062219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.071140] scsi0 : pata_via
[ 1.071391] scsi1 : pata_via
[ 1.074471] FDC 0 is a post-1991 82077
[ 1.076697] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.076702] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.076789] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 1.076821] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 1.076856] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 1.076935] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdfffbe00
[ 1.088022] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.088071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.088074] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.088078] usb usb1: Product: EHCI Host Controller
[ 1.088080] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.088083] usb usb1: SerialNumber: 0000:00:10.4
[ 1.088205] usb usb1: configuration #1 chosen from 1 choice
[ 1.088246] hub 1-0:1.0: USB hub found
[ 1.088261] hub 1-0:1.0: 8 ports detected
[ 1.088487] sata_via 0000:00:0f.0: version 2.4
[ 1.088513] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.088576] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.088815] scsi2 : sata_via
[ 1.088951] scsi3 : sata_via
[ 1.088997] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
[ 1.089001] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
[ 1.141631] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.141722] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.141735] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.141754] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.141785] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c800
[ 1.141862] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.141865] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.141868] usb usb2: Product: UHCI Host Controller
[ 1.141871] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.141873] usb usb2: SerialNumber: 0000:00:10.0
[ 1.142046] usb usb2: configuration #1 chosen from 1 choice
[ 1.142125] hub 2-0:1.0: USB hub found
[ 1.142140] hub 2-0:1.0: 2 ports detected
[ 1.142206] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.142213] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.142226] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.142246] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000cc00
[ 1.142286] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.142290] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.142293] usb usb3: Product: UHCI Host Controller
[ 1.142295] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.142298] usb usb3: SerialNumber: 0000:00:10.1
[ 1.142416] usb usb3: configuration #1 chosen from 1 choice
[ 1.142495] hub 3-0:1.0: USB hub found
[ 1.142507] hub 3-0:1.0: 2 ports detected
[ 1.142559] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.142567] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.142582] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.142602] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000
[ 1.142646] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.142649] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.142652] usb usb4: Product: UHCI Host Controller
[ 1.142655] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.142657] usb usb4: SerialNumber: 0000:00:10.2
[ 1.143998] usb usb4: configuration #1 chosen from 1 choice
[ 1.144211] hub 4-0:1.0: USB hub found
[ 1.144225] hub 4-0:1.0: 2 ports detected
[ 1.144309] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.144320] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.144333] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 1.144362] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d400
[ 1.144415] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.144419] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.144422] usb usb5: Product: UHCI Host Controller
[ 1.144424] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.144426] usb usb5: SerialNumber: 0000:00:10.3
[ 1.144576] usb usb5: configuration #1 chosen from 1 choice
[ 1.144648] hub 5-0:1.0: USB hub found
[ 1.144659] hub 5-0:1.0: 2 ports detected
[ 1.240372] ata1.00: ATAPI: Hewlett-Packard CD-Writer Plus 9100, 1.0c, max UDMA/33
[ 1.240407] ata1.01: ATAPI: Lite-On LTN483S 48x Max, PD02, max UDMA/33, CDB intr
[ 1.256233] ata1.00: configured for UDMA/33
[ 1.264344] ata1.01: configured for UDMA/33
[ 1.269550] scsi 0:0:0:0: CD-ROM HP CD-Writer+ 9100 1.0c PQ: 0 ANSI: 5
[ 1.270190] scsi 0:0:1:0: CD-ROM Lite-On LTN483S 48x Max PD02 PQ: 0 ANSI: 5
[ 1.292012] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.344037] hub 1-0:1.0: over-current change on port 5
[ 1.440529] ata2.00: ATA-7: Maxtor 6E040L0, NAR61EA0, max UDMA/133
[ 1.440533] ata2.00: 80293248 sectors, multi 16: LBA
[ 1.448093] hub 1-0:1.0: over-current change on port 6
[ 1.456344] ata3.00: ATA-7: Maxtor 6Y080M0, YAR511W0, max UDMA/133
[ 1.456348] ata3.00: 160086528 sectors, multi 16: LBA
[ 1.472337] ata3.00: configured for UDMA/133
[ 1.478265] ata2.01: ATA-7: ST3120814A, 3.AAJ, max UDMA/100
[ 1.478268] ata2.01: 234441648 sectors, multi 16: LBA48
[ 1.492391] ata2.00: configured for UDMA/133
[ 1.553249] ata2.01: configured for UDMA/100
[ 1.553337] scsi 1:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
[ 1.553632] scsi 1:0:1:0: Direct-Access ATA ST3120814A 3.AA PQ: 0 ANSI: 5
[ 1.553897] scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5
[ 1.756012] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.792093] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.811567] sd 1:0:0:0: [sda] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB)
[ 1.811634] sd 1:0:0:0: [sda] Write Protect is off
[ 1.811638] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.811667] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.811834] sda:
[ 1.812183] sd 2:0:0:0: [sdc] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.812240] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.812244] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.812269] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.812405] sdc:sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 1.825478] Uniform CD-ROM driver Revision: 3.20
[ 1.825604] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.827889] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.828207] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 1.829470] sda1 sda2 <
[ 1.830708] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.852158] sd 1:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.852221] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.852225] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.852251] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.852321] sda5 >
[ 1.852816] sdb: sdb1
[ 1.876594] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.876693] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.895742] b44 0000:00:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.909444] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.909958] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.910416] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 1.913172] sd 1:0:1:0: Attached scsi generic sg3 type 0
[ 1.913968] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 1.952096] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0b.0
[ 1.952131] b44.c:v2.0
[ 1.962233] usb 3-2: New USB device found, idVendor=04b3, idProduct=310c
[ 1.962237] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.962240] usb 3-2: Product: USB Optical Mouse
[ 1.962349] usb 3-2: configuration #1 chosen from 1 choice
[ 1.973010] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0c:76:4e:4c:b9
[ 1.993705] usbcore: registered new interface driver hiddev
[ 2.006931] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input1
[ 2.007255] generic-usb 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:10.1-2/input0
[ 2.007291] usbcore: registered new interface driver usbhid
[ 2.007510] usbhid: v2.6:USB HID core driver
[ 2.361265] PM: Starting manual resume from disk
[ 2.361272] PM: Resume from partition 8:5
[ 2.361274] PM: Checking hibernation image.
[ 2.377733] PM: Error -22 checking image file
[ 2.377736] PM: Resume from disk failed.
[ 2.431188] kjournald starting. Commit interval 5 seconds
[ 2.431203] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.282787] udev[289]: starting version 164
[ 4.913162] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 4.964981] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.965169] ACPI: Power Button [PWRB]
[ 4.965867] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 4.965968] ACPI: Sleep Button [SLPB]
[ 4.966090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.966160] ACPI: Power Button [PWRF]
[ 5.059843] processor LNXCPU:00: registered as cooling_device0
[ 5.144879] parport_pc 00:0a: reported by Plug and Play ACPI
[ 5.144991] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 5.288100] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.586758] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.631245] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x400-0x406]
[ 5.631298] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.047602] [drm] Initialized drm 1.1.0 20060810
[ 6.163298] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.168905] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018100a2)
[ 6.169052] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[ 6.319635] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 6.319811] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 6.319814] [drm] nouveau 0000:01:00.0: BMP version 5.39
[ 6.319818] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.22
[ 6.319822] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2
[ 6.319828] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 000088b8
[ 6.319832] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01010312 00000000
[ 6.319835] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02010321 00008803
[ 6.320042] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[ 6.320046] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x71EE
[ 6.320088] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x76C9
[ 6.320109] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x7334
[ 6.340016] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x79EF
[ 6.340029] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x7A0C
[ 6.340036] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0x7513
[ 6.364083] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0x7664
[ 6.381436] [TTM] Zone kernel: Available graphics memory: 445554 kiB.
[ 6.381440] [TTM] Zone highmem: Available graphics memory: 517206 kiB.
[ 6.381460] [drm] nouveau 0000:01:00.0: 64 MiB VRAM
[ 6.381546] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 6.381561] agpgart: modprobe tried to set rate=x12. Setting to AGP3 x8 mode.
[ 6.381570] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[ 6.381623] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[ 6.381626] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[ 6.381960] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 6.383606] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[ 6.383749] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[ 6.383757] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 6.426507] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 6.426756] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 6.426850] [drm] nouveau 0000:01:00.0: Detected a TV connector
[ 6.428249] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 6.428255] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 6.428259] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
[ 6.596219] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo efdf5a00
[ 7.258372] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 7.258378] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 7.262585] Console: switching to colour frame buffer device 128x48
[ 7.263693] fb0: nouveaufb frame buffer device
[ 7.263695] registered panic notifier
[ 7.263715] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 7.583870] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 7.584035] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 8.887884] Adding 1675256k swap on /dev/sda5. Priority:-1 extents:1 across:1675256k
[ 9.189201] EXT3 FS on sda1, internal journal
[ 9.317560] loop: module loaded
[ 11.123545] fuse init (API version 7.13)
[ 12.541112] RPC: Registered udp transport module.
[ 12.541116] RPC: Registered tcp transport module.
[ 12.541119] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.772375] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 13.038699] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6
[ 13.060881] svc: failed to register lockdv1 RPC service (errno 97).
[ 13.062021] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 13.084317] NFSD: starting 90-second grace period
[ 14.425969] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.252986] apm: BIOS not found.
[ 17.816160] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 17.816164] b44: eth0: Flow control is off for TX and off for RX.
[ 17.816503] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.940607] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 18.942243] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 20.257895] Bluetooth: Core ver 2.15
[ 20.258001] NET: Registered protocol family 31
[ 20.258003] Bluetooth: HCI device and connection manager initialized
[ 20.258007] Bluetooth: HCI socket layer initialized
[ 20.499151] Bluetooth: L2CAP ver 2.14
[ 20.499157] Bluetooth: L2CAP socket layer initialized
[ 20.501894] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.501897] Bluetooth: BNEP filters: protocol multicast
[ 20.512468] Bluetooth: RFCOMM TTY layer initialized
[ 20.512475] Bluetooth: RFCOMM socket layer initialized
[ 20.512477] Bluetooth: RFCOMM ver 1.11
[ 20.556623] Bridge firewalling registered
[ 20.687556] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.687560] Bluetooth: SCO socket layer initialized
[ 21.750068] lp0: using parport0 (interrupt-driven).
[ 21.785823] ppdev: user-space parallel port driver
[ 28.540006] eth0: no IPv6 routers present
[ 2232.727732] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 8909.872503] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[11084.729873] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[15401.156077] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[16598.773439] atkbd.c: Unknown key pressed (translated set 2, code 0x9f on isa0060/serio0).
[16598.773444] atkbd.c: Use 'setkeycodes e01f ' to make it known.
[16599.509666] atkbd.c: Unknown key released (translated set 2, code 0x9f on isa0060/serio0).
[16599.509671] atkbd.c: Use 'setkeycodes e01f ' to make it known.
[16762.142251] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[16762.812586] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[16762.812591] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A