dmesg - default
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-12-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M4N75TD, BIOS 1701 04/14/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ cff8d000-cff90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ 12fffe000-130000000
[ 0.000000] RAMDISK: 35a82000 - 36d39000
[ 0.000000] ACPI: RSDP 00000000000fbcd0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff90100 0006C (v01 041411 XSDT1530 20110414 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 041411 FACP1530 20110414 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff90460 0B56B (v01 A1582 A1582000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cffa8000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 00090 (v01 041411 APIC1530 20110414 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff90420 0003C (v01 041411 OEMMCFG 20110414 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffa8040 00073 (v01 041411 OEMB1530 20110414 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cff9b9d0 000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cff9bac0 00038 (v01 041411 OEMHPET0 20110414 MSFT 00000097)
[ 0.000000] ACPI: INFO 00000000cffa80c0 00124 (v01 041411 AMDINFO 20110414 MSFT 00000097)
[ 0.000000] ACPI: NVHD 00000000cffa81f0 00554 (v01 041411 NVHDCP 20110414 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff9bb00 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-130000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
[ 0.000000] NUMA: Node 0 [0,d0000000) + [100000000,130000000) -> [0,130000000)
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fff9000 - 000000012fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048350
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
[ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
[ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s79616 r8192 d22784 u262144
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031321
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ f97c000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 3969116k/4980736k available (6104k kernel code, 787336k absent, 224284k reserved, 4880k data, 984k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3000.479 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.95 BogoMIPS (lpj=12001916)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004027] Security Framework initialized
[ 0.004038] AppArmor: AppArmor initialized
[ 0.004039] Yama: becoming mindful.
[ 0.004363] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005493] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006001] Mount-cache hash table entries: 256
[ 0.006101] Initializing cgroup subsys cpuacct
[ 0.006105] Initializing cgroup subsys memory
[ 0.006112] Initializing cgroup subsys devices
[ 0.006114] Initializing cgroup subsys freezer
[ 0.006115] Initializing cgroup subsys net_cls
[ 0.006117] Initializing cgroup subsys blkio
[ 0.006122] Initializing cgroup subsys perf_event
[ 0.006143] tseg: 0000000000
[ 0.006155] CPU: Physical Processor ID: 0
[ 0.006156] CPU: Processor Core ID: 0
[ 0.006158] mce: CPU supports 6 MCE banks
[ 0.006165] using AMD E400 aware idle routine
[ 0.009078] ACPI: Core revision 20110413
[ 0.013155] ftrace: allocating 25651 entries in 101 pages
[ 0.016535] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058873] CPU0: AMD Athlon(tm) II X4 640 Processor stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 99000
[ 0.148020] System has AMD C1E enabled
[ 0.148034] Switch to broadcast mode on CPU1
[ 0.148064] #2
[ 0.148065] smpboot cpu 2: start_ip = 99000
[ 0.240029] Switch to broadcast mode on CPU2
[ 0.240072] #3
[ 0.240073] smpboot cpu 3: start_ip = 99000
[ 0.332034] Brought up 4 CPUs
[ 0.332036] Total of 4 processors activated (24001.06 BogoMIPS).
[ 0.332033] Switch to broadcast mode on CPU3
[ 0.332577] Switch to broadcast mode on CPU0
[ 0.332577] devtmpfs: initialized
[ 0.332577] PM: Registering ACPI NVS region at cffa8000 (229376 bytes)
[ 0.333091] print_constraints: dummy:
[ 0.333147] Time: 17:07:17 Date: 02/06/12
[ 0.333175] NET: Registered protocol family 16
[ 0.333262] node 0 link 0: io port [1000, ffffff]
[ 0.333264] node 0 link 0: io port [1000, 1fff]
[ 0.333270] TOM: 00000000d0000000 aka 3328M
[ 0.333271] Fam 10h mmconf [e0000000, efffffff]
[ 0.333273] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.333276] node 0 link 0: mmio [a0000, bffff]
[ 0.333277] node 0 link 0: mmio [d0000000, fe0bffff] ==> [d0000000, dfffffff] and [f0000000, fe0bffff]
[ 0.333281] TOM2: 0000000130000000 aka 4864M
[ 0.333282] bus: [00, 07] on node 0 link 0
[ 0.333285] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.333286] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.333288] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.333289] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.333291] bus: 00 index 4 [mem 0x130000000-0xfcffffffff]
[ 0.333298] Extended Config Space enabled on 1 nodes
[ 0.333310] ACPI: bus type pci registered
[ 0.333359] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.333183] Trying to unpack rootfs image as initramfs...
[ 0.333366] PCI: not using MMCONFIG
[ 0.333368] PCI: Using configuration type 1 for base access
[ 0.333369] PCI: Using configuration type 1 for extended access
[ 0.333834] bio: create slab at 0
[ 0.336078] ACPI: EC: Look up EC in DSDT
[ 0.337244] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.424320] ACPI: Interpreter enabled
[ 0.424324] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.424341] ACPI: Using IOAPIC for interrupt routing
[ 0.424365] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.425015] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.447507] ACPI: No dock devices found.
[ 0.447510] HEST: Table not found.
[ 0.447512] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.447671] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.447808] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.447810] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.447811] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.447813] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.447815] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.447816] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.447851] pci 0000:00:00.0: [10de:0754] type 0 class 0x000500
[ 0.448086] pci 0000:00:01.0: [10de:075d] type 0 class 0x000601
[ 0.448092] pci 0000:00:01.0: reg 10: [io 0x0900-0x09ff]
[ 0.448125] pci 0000:00:01.1: [10de:0752] type 0 class 0x000c05
[ 0.448136] pci 0000:00:01.1: reg 10: [io 0x0e00-0x0e3f]
[ 0.448151] pci 0000:00:01.1: reg 20: [io 0x0600-0x063f]
[ 0.448156] pci 0000:00:01.1: reg 24: [io 0x0700-0x073f]
[ 0.448175] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.448180] pci 0000:00:01.1: PME# disabled
[ 0.448189] pci 0000:00:01.2: [10de:0751] type 0 class 0x000500
[ 0.448233] pci 0000:00:01.3: [10de:0753] type 0 class 0x000b40
[ 0.448249] pci 0000:00:01.3: reg 10: [mem 0xf7e80000-0xf7efffff]
[ 0.448355] pci 0000:00:01.4: [10de:0568] type 0 class 0x000500
[ 0.448419] pci 0000:00:02.0: [10de:077b] type 0 class 0x000c03
[ 0.448428] pci 0000:00:02.0: reg 10: [mem 0xf7e7e000-0xf7e7efff]
[ 0.448457] pci 0000:00:02.0: supports D1 D2
[ 0.448458] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448461] pci 0000:00:02.0: PME# disabled
[ 0.448471] pci 0000:00:02.1: [10de:077c] type 0 class 0x000c03
[ 0.448481] pci 0000:00:02.1: reg 10: [mem 0xf7e7fc00-0xf7e7fcff]
[ 0.448514] pci 0000:00:02.1: supports D1 D2
[ 0.448515] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448518] pci 0000:00:02.1: PME# disabled
[ 0.448534] pci 0000:00:04.0: [10de:077d] type 0 class 0x000c03
[ 0.448543] pci 0000:00:04.0: reg 10: [mem 0xf7e7d000-0xf7e7dfff]
[ 0.448572] pci 0000:00:04.0: supports D1 D2
[ 0.448573] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448576] pci 0000:00:04.0: PME# disabled
[ 0.448586] pci 0000:00:04.1: [10de:077e] type 0 class 0x000c03
[ 0.448595] pci 0000:00:04.1: reg 10: [mem 0xf7e7f800-0xf7e7f8ff]
[ 0.448629] pci 0000:00:04.1: supports D1 D2
[ 0.448630] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448633] pci 0000:00:04.1: PME# disabled
[ 0.448650] pci 0000:00:07.0: [10de:0774] type 0 class 0x000403
[ 0.448658] pci 0000:00:07.0: reg 10: [mem 0xf7e78000-0xf7e7bfff]
[ 0.448687] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.448690] pci 0000:00:07.0: PME# disabled
[ 0.448699] pci 0000:00:08.0: [10de:075a] type 1 class 0x000604
[ 0.448732] pci 0000:00:09.0: [10de:0ad4] type 0 class 0x000106
[ 0.448740] pci 0000:00:09.0: reg 10: [io 0xc080-0xc087]
[ 0.448744] pci 0000:00:09.0: reg 14: [io 0xc000-0xc003]
[ 0.448748] pci 0000:00:09.0: reg 18: [io 0xbc00-0xbc07]
[ 0.448751] pci 0000:00:09.0: reg 1c: [io 0xb880-0xb883]
[ 0.448755] pci 0000:00:09.0: reg 20: [io 0xb800-0xb80f]
[ 0.448759] pci 0000:00:09.0: reg 24: [mem 0xf7e76000-0xf7e77fff]
[ 0.448784] pci 0000:00:0a.0: [10de:0760] type 0 class 0x000200
[ 0.448793] pci 0000:00:0a.0: reg 10: [mem 0xf7e7c000-0xf7e7cfff]
[ 0.448797] pci 0000:00:0a.0: reg 14: [io 0xb480-0xb487]
[ 0.448800] pci 0000:00:0a.0: reg 18: [mem 0xf7e7f400-0xf7e7f4ff]
[ 0.448804] pci 0000:00:0a.0: reg 1c: [mem 0xf7e7f000-0xf7e7f00f]
[ 0.448825] pci 0000:00:0a.0: supports D1 D2
[ 0.448826] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.448830] pci 0000:00:0a.0: PME# disabled
[ 0.448884] pci 0000:00:10.0: [10de:0778] type 1 class 0x000604
[ 0.449050] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449057] pci 0000:00:10.0: PME# disabled
[ 0.449138] pci 0000:00:11.0: [10de:0779] type 1 class 0x000604
[ 0.449304] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449311] pci 0000:00:11.0: PME# disabled
[ 0.449393] pci 0000:00:13.0: [10de:077a] type 1 class 0x000604
[ 0.449559] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449566] pci 0000:00:13.0: PME# disabled
[ 0.449647] pci 0000:00:14.0: [10de:077a] type 1 class 0x000604
[ 0.449813] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.449820] pci 0000:00:14.0: PME# disabled
[ 0.449863] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.449875] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.449885] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.449897] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.449909] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.449953] pci 0000:01:0a.0: [1106:3044] type 0 class 0x000c00
[ 0.449966] pci 0000:01:0a.0: reg 10: [mem 0xf7fff800-0xf7ffffff]
[ 0.449973] pci 0000:01:0a.0: reg 14: [io 0xdc00-0xdc7f]
[ 0.450016] pci 0000:01:0a.0: supports D2
[ 0.450017] pci 0000:01:0a.0: PME# supported from D2 D3hot D3cold
[ 0.450020] pci 0000:01:0a.0: PME# disabled
[ 0.450043] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.450046] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff]
[ 0.450048] pci 0000:00:08.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.450051] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.450053] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.450055] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.450056] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.450058] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.450060] pci 0000:00:08.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.450062] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.450211] pci 0000:00:10.0: PCI bridge to [bus 02-02]
[ 0.450224] pci 0000:00:10.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.450231] pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.450244] pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.450402] pci 0000:03:00.0: [10de:0615] type 0 class 0x000300
[ 0.450408] pci 0000:03:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.450416] pci 0000:03:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.450423] pci 0000:03:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.450428] pci 0000:03:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.450433] pci 0000:03:00.0: reg 30: [mem 0xfafe0000-0xfaffffff pref]
[ 0.450477] pci 0000:00:11.0: PCI bridge to [bus 03-03]
[ 0.450490] pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
[ 0.450497] pci 0000:00:11.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.450510] pci 0000:00:11.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.450662] pci 0000:00:13.0: PCI bridge to [bus 04-04]
[ 0.450675] pci 0000:00:13.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.450682] pci 0000:00:13.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.450695] pci 0000:00:13.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.450847] pci 0000:00:14.0: PCI bridge to [bus 05-05]
[ 0.450860] pci 0000:00:14.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.450867] pci 0000:00:14.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.450880] pci 0000:00:14.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.450930] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.451079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.451130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
[ 0.451151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.451174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 0.451195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.451286] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.451408] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.451410] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.457026] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.457094] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.457160] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.457230] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *14
[ 0.457300] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 0.457365] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 0.457430] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.457495] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.457563] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *11
[ 0.457628] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.457693] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.457758] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.457824] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[ 0.457890] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.457955] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.458021] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.458088] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
[ 0.458153] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.458218] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.458284] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.458352] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *14
[ 0.458417] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.458482] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.458548] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.458614] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.458681] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.458747] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.458814] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.458880] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.458948] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.459017] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.459083] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.459149] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 0.459215] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 0.459281] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 0.459347] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 0.459415] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
[ 0.459483] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.459550] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
[ 0.459618] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[ 0.459688] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.459755] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.459823] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[ 0.459895] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.459970] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.460054] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[ 0.460123] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *14
[ 0.460209] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.460211] vgaarb: loaded
[ 0.460212] vgaarb: bridge control possible 0000:03:00.0
[ 0.460344] SCSI subsystem initialized
[ 0.460367] libata version 3.00 loaded.
[ 0.460367] usbcore: registered new interface driver usbfs
[ 0.460367] usbcore: registered new interface driver hub
[ 0.460367] usbcore: registered new device driver usb
[ 0.460367] PCI: Using ACPI for IRQ routing
[ 0.467054] PCI: pci_cache_line_size set to 64 bytes
[ 0.467132] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.467134] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.467202] NetLabel: Initializing
[ 0.467203] NetLabel: domain hash size = 128
[ 0.467204] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.467213] NetLabel: unlabeled traffic allowed by default
[ 0.467249] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.467254] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.467257] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.484067] Switching to clocksource hpet
[ 0.487904] Switched to NOHz mode on CPU #3
[ 0.487910] Switched to NOHz mode on CPU #1
[ 0.487914] Switched to NOHz mode on CPU #0
[ 0.487921] Switched to NOHz mode on CPU #2
[ 0.488283] AppArmor: AppArmor Filesystem Enabled
[ 0.488308] pnp: PnP ACPI init
[ 0.488321] ACPI: bus type pnp registered
[ 0.488432] pnp 00:00: [bus 00-ff]
[ 0.488434] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.488435] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.488437] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.488439] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.488440] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.488442] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.488443] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.488499] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.488522] pnp 00:01: [dma 4]
[ 0.488523] pnp 00:01: [io 0x0000-0x000f]
[ 0.488525] pnp 00:01: [io 0x0081-0x0083]
[ 0.488526] pnp 00:01: [io 0x0087]
[ 0.488528] pnp 00:01: [io 0x0089-0x008b]
[ 0.488529] pnp 00:01: [io 0x008f]
[ 0.488530] pnp 00:01: [io 0x00c0-0x00df]
[ 0.488547] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.488553] pnp 00:02: [io 0x0061]
[ 0.488565] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.488571] pnp 00:03: [io 0x00f0-0x00ff]
[ 0.488584] pnp 00:03: [irq 13]
[ 0.488596] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.488792] pnp 00:04: [mem 0x000d0000-0x000d3fff window]
[ 0.488794] pnp 00:04: [mem 0x000d4000-0x000d7fff window]
[ 0.488796] pnp 00:04: [mem 0x000de000-0x000dffff window]
[ 0.488800] pnp 00:04: [io 0x0010-0x001f]
[ 0.488801] pnp 00:04: [io 0x0022-0x003f]
[ 0.488803] pnp 00:04: [io 0x0044-0x004d]
[ 0.488804] pnp 00:04: [io 0x0050-0x005f]
[ 0.488805] pnp 00:04: [io 0x0062-0x0063]
[ 0.488807] pnp 00:04: [io 0x0065-0x006f]
[ 0.488808] pnp 00:04: [io 0x0072-0x007f]
[ 0.488810] pnp 00:04: [io 0x0080]
[ 0.488811] pnp 00:04: [io 0x0084-0x0086]
[ 0.488812] pnp 00:04: [io 0x0088]
[ 0.488814] pnp 00:04: [io 0x008c-0x008e]
[ 0.488815] pnp 00:04: [io 0x0090-0x009f]
[ 0.488816] pnp 00:04: [io 0x00a2-0x00bf]
[ 0.488818] pnp 00:04: [io 0x00e0-0x00ef]
[ 0.488819] pnp 00:04: [io 0x04d0-0x04d1]
[ 0.488821] pnp 00:04: [io 0x0800-0x080f]
[ 0.488822] pnp 00:04: [io 0x0500-0x057f]
[ 0.488824] pnp 00:04: [io 0x0580-0x05ff]
[ 0.488825] pnp 00:04: [io 0x0800-0x087f]
[ 0.488826] pnp 00:04: [io 0x0880-0x08ff]
[ 0.488828] pnp 00:04: [io 0x0d00-0x0d7f]
[ 0.488829] pnp 00:04: [io 0x0d80-0x0dff]
[ 0.488831] pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.488833] pnp 00:04: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.488835] pnp 00:04: [mem 0xfed04000-0xfed04fff]
[ 0.488836] pnp 00:04: [mem 0xfee01000-0xfeefffff]
[ 0.488888] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.488890] system 00:04: [io 0x0800-0x080f] has been reserved
[ 0.488892] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.488894] system 00:04: [io 0x0580-0x05ff] has been reserved
[ 0.488896] system 00:04: [io 0x0800-0x087f] could not be reserved
[ 0.488898] system 00:04: [io 0x0880-0x08ff] has been reserved
[ 0.488900] system 00:04: [io 0x0d00-0x0d7f] has been reserved
[ 0.488902] system 00:04: [io 0x0d80-0x0dff] has been reserved
[ 0.488904] system 00:04: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.488907] system 00:04: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.488909] system 00:04: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.488911] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved
[ 0.488914] system 00:04: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.488916] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.488993] pnp 00:05: [mem 0xfed00000-0xfed00fff]
[ 0.488995] pnp 00:05: [irq 2 disabled]
[ 0.489002] pnp 00:05: [irq 8]
[ 0.489016] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.489032] pnp 00:06: [io 0x0070-0x0071]
[ 0.489048] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.489099] pnp 00:07: [io 0x0060]
[ 0.489100] pnp 00:07: [io 0x0064]
[ 0.489102] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.489103] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.489128] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.489131] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.489133] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.489276] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.489277] pnp 00:08: [io 0x0230-0x023f]
[ 0.489279] pnp 00:08: [io 0x0290-0x029f]
[ 0.489280] pnp 00:08: [io 0x0a00-0x0a0f]
[ 0.489282] pnp 00:08: [io 0x0a10-0x0a1f]
[ 0.489307] system 00:08: [io 0x0230-0x023f] has been reserved
[ 0.489309] system 00:08: [io 0x0290-0x029f] has been reserved
[ 0.489311] system 00:08: [io 0x0a00-0x0a0f] has been reserved
[ 0.489313] system 00:08: [io 0x0a10-0x0a1f] has been reserved
[ 0.489316] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.489527] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.489553] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.489555] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.489660] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.489662] pnp 00:0a: [mem 0x000c0000-0x000cffff]
[ 0.489665] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 0.489667] pnp 00:0a: [mem 0x00100000-0xcfffffff]
[ 0.489668] pnp 00:0a: [mem 0xfec00000-0xffffffff]
[ 0.489702] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.489704] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.489706] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.489708] system 00:0a: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.489710] system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.489713] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.490152] pnp: PnP ACPI: found 11 devices
[ 0.490154] ACPI: ACPI bus type pnp unregistered
[ 0.495606] PCI: max bus depth: 1 pci_try_num: 2
[ 0.495684] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.495686] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff]
[ 0.495689] pci 0000:00:08.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.495692] pci 0000:00:08.0: bridge window [mem pref disabled]
[ 0.495695] pci 0000:00:10.0: PCI bridge to [bus 02-02]
[ 0.495696] pci 0000:00:10.0: bridge window [io disabled]
[ 0.495705] pci 0000:00:10.0: bridge window [mem disabled]
[ 0.495712] pci 0000:00:10.0: bridge window [mem pref disabled]
[ 0.495724] pci 0000:00:11.0: PCI bridge to [bus 03-03]
[ 0.495728] pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
[ 0.495737] pci 0000:00:11.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.495744] pci 0000:00:11.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.495755] pci 0000:00:13.0: PCI bridge to [bus 04-04]
[ 0.495757] pci 0000:00:13.0: bridge window [io disabled]
[ 0.495765] pci 0000:00:13.0: bridge window [mem disabled]
[ 0.495772] pci 0000:00:13.0: bridge window [mem pref disabled]
[ 0.495783] pci 0000:00:14.0: PCI bridge to [bus 05-05]
[ 0.495784] pci 0000:00:14.0: bridge window [io disabled]
[ 0.495793] pci 0000:00:14.0: bridge window [mem disabled]
[ 0.495799] pci 0000:00:14.0: bridge window [mem pref disabled]
[ 0.495816] pci 0000:00:08.0: setting latency timer to 64
[ 0.495955] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.495970] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 0.495977] pci 0000:00:10.0: setting latency timer to 64
[ 0.496101] ACPI: PCI Interrupt Link [LN1A] enabled at IRQ 18
[ 0.496110] pci 0000:00:11.0: PCI INT A -> Link[LN1A] -> GSI 18 (level, low) -> IRQ 18
[ 0.496117] pci 0000:00:11.0: setting latency timer to 64
[ 0.496221] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
[ 0.496228] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17
[ 0.496236] pci 0000:00:13.0: setting latency timer to 64
[ 0.496338] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 16
[ 0.496346] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 16 (level, low) -> IRQ 16
[ 0.496353] pci 0000:00:14.0: setting latency timer to 64
[ 0.496358] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.496360] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.496362] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.496363] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.496365] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.496366] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.496368] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.496370] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.496371] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.496373] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.496374] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.496376] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.496378] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.496379] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.496381] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.496382] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.496384] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.496417] NET: Registered protocol family 2
[ 0.496542] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.497503] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.499647] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.499905] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.499907] TCP reno registered
[ 0.499919] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.499946] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.500079] NET: Registered protocol family 1
[ 0.659950] Freeing initrd memory: 19164k freed
[ 0.668243] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.668340] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.668440] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.668678] pci 0000:03:00.0: Boot video device
[ 0.668681] PCI: CLS 64 bytes, default 64
[ 0.671999] PCI-DMA: Disabling AGP.
[ 0.672114] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.672116] PCI-DMA: using GART IOMMU.
[ 0.672118] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.674778] audit: initializing netlink socket (disabled)
[ 0.674796] type=2000 audit(1328548037.668:1): initialized
[ 0.696504] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.711237] VFS: Disk quotas dquot_6.5.2
[ 0.711283] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.711801] fuse init (API version 7.16)
[ 0.711891] msgmni has been set to 7918
[ 0.712447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.712549] io scheduler noop registered
[ 0.712553] io scheduler deadline registered
[ 0.712615] io scheduler cfq registered (default)
[ 0.713763] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.713782] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.713876] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.713880] ACPI: Power Button [PWRB]
[ 0.713912] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.713914] ACPI: Power Button [PWRF]
[ 0.713936] ACPI: acpi_idle registered with cpuidle
[ 0.713951] ACPI: processor limited to max C-state 1
[ 0.716644] ERST: Table is not found!
[ 0.903548] Linux agpgart interface v0.103
[ 0.904257] brd: module loaded
[ 0.904567] loop: module loaded
[ 0.904867] Fixed MDIO Bus: probed
[ 0.904883] PPP generic driver version 2.4.2
[ 0.904913] tun: Universal TUN/TAP device driver, 1.6
[ 0.904914] tun: (C) 1999-2004 Max Krasnyansky
[ 0.904966] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.905259] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 0.905277] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 0.905323] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.905326] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.905383] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.905405] ehci_hcd 0000:00:02.1: debug port 1
[ 0.905412] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.905433] ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7e7fc00
[ 0.916092] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.916206] hub 1-0:1.0: USB hub found
[ 0.916209] hub 1-0:1.0: 6 ports detected
[ 0.916548] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 22
[ 0.916565] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
[ 0.916582] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.916584] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.916651] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.916667] ehci_hcd 0000:00:04.1: debug port 1
[ 0.916674] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.916692] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf7e7f800
[ 0.928091] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.928209] hub 2-0:1.0: USB hub found
[ 0.928212] hub 2-0:1.0: 6 ports detected
[ 0.928307] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.928580] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 0.928597] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
[ 0.928614] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.928616] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.928671] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.928698] ohci_hcd 0000:00:02.0: irq 21, io mem 0xf7e7e000
[ 0.986187] hub 3-0:1.0: USB hub found
[ 0.986193] hub 3-0:1.0: 6 ports detected
[ 0.986542] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 20
[ 0.986559] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20
[ 0.986576] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.986578] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.986634] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.986664] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf7e7d000
[ 1.042179] hub 4-0:1.0: USB hub found
[ 1.042184] hub 4-0:1.0: 6 ports detected
[ 1.042279] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.042349] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.042809] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.042821] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.042939] mousedev: PS/2 mouse device common for all mice
[ 1.043024] rtc_cmos 00:06: RTC can wake from S4
[ 1.043195] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.043245] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.043323] device-mapper: uevent: version 1.0.3
[ 1.043367] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 1.043373] cpuidle: using governor ladder
[ 1.043375] cpuidle: using governor menu
[ 1.043376] EFI Variables Facility v0.08 2004-May-17
[ 1.043536] TCP cubic registered
[ 1.043612] NET: Registered protocol family 10
[ 1.043942] NET: Registered protocol family 17
[ 1.043956] Registering the dns_resolver key type
[ 1.044065] PM: Hibernation image not present or could not be loaded.
[ 1.044074] registered taskstats version 1
[ 1.057346] Magic number: 0:293:137
[ 1.057361] block ram2: hash matches
[ 1.057487] rtc_cmos 00:06: setting system clock to 2012-02-06 17:07:18 UTC (1328548038)
[ 1.057503] powernow-k8: Found 1 AMD Athlon(tm) II X4 640 Processor (4 cpu cores) (version 2.20.00)
[ 1.057529] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 1.057531] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 1.057532] powernow-k8: 2 : pstate 2 (1800 MHz)
[ 1.057533] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.058137] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.058140] EDD information not available.
[ 1.059434] Freeing unused kernel memory: 984k freed
[ 1.059640] Write protecting the kernel read-only data: 10240k
[ 1.059842] Freeing unused kernel memory: 20k freed
[ 1.063533] Freeing unused kernel memory: 1400k freed
[ 1.083551] udevd[123]: starting version 173
[ 1.113181] ahci 0000:00:09.0: version 3.0
[ 1.113353] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 1.113358] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.113419] ahci 0000:00:09.0: irq 40 for MSI/MSI-X
[ 1.113424] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 1.113494] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.113496] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh
[ 1.113499] ahci 0000:00:09.0: setting latency timer to 64
[ 1.116105] scsi0 : ahci
[ 1.118078] scsi1 : ahci
[ 1.118311] scsi2 : ahci
[ 1.122034] scsi3 : ahci
[ 1.122216] scsi4 : ahci
[ 1.122637] scsi5 : ahci
[ 1.122749] ata1: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76100 irq 40
[ 1.122752] ata2: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76180 irq 40
[ 1.122754] ata3: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76200 irq 40
[ 1.122756] ata4: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76280 irq 40
[ 1.122759] ata5: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76300 irq 40
[ 1.122761] ata6: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76380 irq 40
[ 1.124980] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.125147] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 1.125153] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 1.125156] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.440083] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.441561] ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB04, max UDMA/100
[ 1.444093] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.444115] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.444134] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.444151] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.448093] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.449802] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 1.449805] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.455496] ata3.00: configured for UDMA/133
[ 1.644602] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 1, addr e0:cb:4e:cf:37:34
[ 1.644605] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[ 1.652092] usb 3-2: new low speed USB device number 2 using ohci_hcd
[ 1.672105] Refined TSC clocksource calibration: 3000.000 MHz.
[ 1.672111] Switching to clocksource tsc
[ 2.180069] usb 3-3: new low speed USB device number 3 using ohci_hcd
[ 2.242397] ata1.00: configured for UDMA/100
[ 2.393871] usbcore: registered new interface driver usbhid
[ 2.393873] usbhid: USB HID core driver
[ 2.696068] usb 3-4: new full speed USB device number 4 using ohci_hcd
[ 3.044260] scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB04 PQ: 0 ANSI: 5
[ 3.047586] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.047590] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.047699] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.047767] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 3.048030] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 3.048174] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.048210] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.048315] sd 2:0:0:0: [sda] Write Protect is off
[ 3.048320] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.048345] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.094383] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 3.094917] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.097403] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
[ 3.097410] firewire_ohci 0000:01:0a.0: PCI INT A -> Link[LNKD] -> GSI 19 (level, low) -> IRQ 19
[ 3.109442] ata1.00: exception Emask 0x12 SAct 0x0 SErr 0x400 action 0x6 frozen
[ 3.109445] ata1.00: irq_stat 0x08000002, interface fatal error
[ 3.109447] ata1: SError: { Proto }
[ 3.109449] ata1.00: failed command: IDENTIFY PACKET DEVICE
[ 3.109453] ata1.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 3.109454] res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error)
[ 3.109456] ata1.00: status: { DRDY }
[ 3.109459] ata1: hard resetting link
[ 3.110202] input: Twin USB Joystick as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input2
[ 3.110274] input: Twin USB Joystick as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input3
[ 3.110325] pantherlord 0003:0810:0001.0001: input,hidraw0: USB HID v1.10 Joystick [Twin USB Joystick] on usb-0000:00:02.0-3/input0
[ 3.110339] pantherlord 0003:0810:0001.0001: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula
[ 3.160110] firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 3.336083] usb 4-3: new full speed USB device number 2 using ohci_hcd
[ 3.440088] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.565429] input: A4TECH USB Device as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/input/input4
[ 3.565544] generic-usb 0003:09DA:054F.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:04.0-3/input0
[ 3.571318] input: A4TECH USB Device as /devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.1/input/input5
[ 3.571400] generic-usb 0003:09DA:054F.0003: input,hidraw2: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:04.0-3/input1
[ 3.660169] firewire_core: created device fw0: GUID 001e8c000031f26b, S400
[ 4.711318] ata1.00: configured for UDMA/100
[ 5.512133] ata1: EH complete
[ 5.521406] ata1.00: exception Emask 0x12 SAct 0x0 SErr 0x400 action 0x6 frozen
[ 5.521409] ata1.00: irq_stat 0x08000002, interface fatal error
[ 5.521412] ata1: SError: { Proto }
[ 5.521414] ata1.00: failed command: IDENTIFY PACKET DEVICE
[ 5.521418] ata1.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 5.521419] res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error)
[ 5.521420] ata1.00: status: { DRDY }
[ 5.521424] ata1: hard resetting link
[ 5.840067] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.123455] ata1.00: configured for UDMA/100
[ 7.924133] ata1: EH complete
[ 9.090342] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 9.090345] vesafb: scrolling: redraw
[ 9.090348] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 9.090681] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90011100000, using 1216k, total 1216k
[ 9.090791] Console: switching to colour frame buffer device 80x30
[ 9.090800] fb0: VESA VGA frame buffer device
[ 9.391648] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 10.623178] udevd[431]: starting version 173
[ 11.363350] lp: driver loaded but no devices found
[ 11.538357] wmi: Mapper loaded
[ 11.559568] ata1.00: exception Emask 0x12 SAct 0x0 SErr 0x400 action 0x6 frozen
[ 11.559572] ata1.00: irq_stat 0x08000002, interface fatal error
[ 11.559574] ata1: SError: { Proto }
[ 11.559577] ata1.00: failed command: IDENTIFY PACKET DEVICE
[ 11.559581] ata1.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 11.559581] res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error)
[ 11.559583] ata1.00: status: { DRDY }
[ 11.559586] ata1: hard resetting link
[ 11.742037] Bluetooth: Core ver 2.16
[ 11.742073] NET: Registered protocol family 31
[ 11.742074] Bluetooth: HCI device and connection manager initialized
[ 11.742077] Bluetooth: HCI socket layer initialized
[ 11.742078] Bluetooth: L2CAP socket layer initialized
[ 11.742281] Bluetooth: SCO socket layer initialized
[ 11.748725] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 11.748990] usbcore: registered new interface driver btusb
[ 11.851575] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 11.851595] i2c i2c-1: nForce2 SMBus adapter at 0x700
[ 11.880139] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.088344] input: Wacom Graphire2 4x5 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input6
[ 12.090611] MCE: In-kernel MCE decoding enabled.
[ 12.099655] EDAC MC: Ver: 2.1.0
[ 12.100694] AMD64 EDAC driver v3.4.0
[ 12.100810] EDAC amd64: DRAM ECC disabled.
[ 12.100825] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 12.100826] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 12.100827] (Note that use of the override may cause unknown side effects.)
[ 12.123178] usbcore: registered new interface driver wacom
[ 12.123181] wacom: v1.52:USB Wacom tablet driver
[ 12.350759] nvidia: module license 'NVIDIA' taints kernel.
[ 12.350763] Disabling lock debugging due to kernel taint
[ 12.703910] nvidia 0000:03:00.0: PCI INT A -> Link[LN1A] -> GSI 18 (level, low) -> IRQ 18
[ 12.703922] nvidia 0000:03:00.0: setting latency timer to 64
[ 12.703927] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.704120] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011
[ 12.888023] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 12.888029] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 12.888162] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 12.888166] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 12.888168] hda_intel: Disabling MSI
[ 12.888201] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 13.161452] ata1.00: configured for UDMA/100
[ 13.455077] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 13.573999] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 13.962248] ata1: EH complete
[ 16.478620] ppdev: user-space parallel port driver
[ 17.808069] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 19.230685] Adding 5858300k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:5858300k
[ 20.105418] init: failsafe main process (961) killed by TERM signal
[ 23.167244] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.167247] Bluetooth: BNEP filters: protocol multicast
[ 23.383895] Bluetooth: RFCOMM TTY layer initialized
[ 23.383899] Bluetooth: RFCOMM socket layer initialized
[ 23.383901] Bluetooth: RFCOMM ver 1.11
[ 28.300263] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 28.446744] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 28.472084] eth0: no IPv6 routers present
[ 29.817874] init: plymouth-stop pre-start process (1774) terminated with status 1
[ 34.203049] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 34.205663] EXT4-fs (sda7): re-mounted. Opts: commit=0
[ 125.012893] hub 3-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
[ 125.012906] usb 3-2: USB disconnect, device number 2
[ 125.412132] usb 3-2: new low speed USB device number 5 using ohci_hcd
[ 125.628446] input: Wacom Graphire2 4x5 as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input7