dmesg - Nocache
0 irq 17
[ 1.157584] ata10: SATA max UDMA/133 abar m8192@0xfb6fe000 port 0xfb6fe180 irq 17
[ 1.157597] ahci 0000:0d:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.167772] ahci 0000:0d:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.167776] ahci 0000:0d:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.167783] ahci 0000:0d:00.0: setting latency timer to 64
[ 1.168075] scsi10 : ahci
[ 1.168140] scsi11 : ahci
[ 1.168222] ata11: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 19
[ 1.168225] ata12: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe180 irq 19
[ 1.169046] pata_jmicron 0000:0c:00.1: enabling device (0000 -> 0001)
[ 1.169056] pata_jmicron 0000:0c:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.169082] pata_jmicron 0000:0c:00.1: setting latency timer to 64
[ 1.169371] scsi12 : pata_jmicron
[ 1.169442] scsi13 : pata_jmicron
[ 1.169827] ata13: PATA max UDMA/100 cmd 0x9f00 ctl 0x9e00 bmdma 0x9b00 irq 18
[ 1.169829] ata14: PATA max UDMA/100 cmd 0x9d00 ctl 0x9c00 bmdma 0x9b08 irq 18
[ 1.169843] pata_jmicron 0000:0d:00.1: enabling device (0000 -> 0001)
[ 1.169849] pata_jmicron 0000:0d:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.169870] pata_jmicron 0000:0d:00.1: setting latency timer to 64
[ 1.170188] scsi14 : pata_jmicron
[ 1.170251] scsi15 : pata_jmicron
[ 1.170659] ata15: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16
[ 1.170661] ata16: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 16
[ 1.171564] Fixed MDIO Bus: probed
[ 1.171593] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
[ 1.171684] I2O subsystem v1.325
[ 1.171686] i2o: max drivers = 8
[ 1.171770] I2O Configuration OSM v1.323
[ 1.171816] I2O Bus Adapter OSM v1.317
[ 1.171832] I2O Block Device OSM v1.325
[ 1.171905] I2O SCSI Peripheral OSM v1.316
[ 1.171922] I2O ProcFS OSM v1.316
[ 1.171942] Fusion MPT base driver 3.04.20
[ 1.171943] Copyright (c) 1999-2008 LSI Corporation
[ 1.171946] Fusion MPT SPI Host driver 3.04.20
[ 1.171976] Fusion MPT FC Host driver 3.04.20
[ 1.172011] Fusion MPT SAS Host driver 3.04.20
[ 1.172041] Fusion MPT misc device (ioctl) driver 3.04.20
[ 1.172091] mptctl: Registered with Fusion MPT base driver
[ 1.172092] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 1.172094] Fusion MPT LAN driver 3.04.20
[ 1.172162] Initializing USB Mass Storage driver...
[ 1.172187] usbcore: registered new interface driver usb-storage
[ 1.172189] USB Mass Storage support registered.
[ 1.172210] usbcore: registered new interface driver libusual
[ 1.172230] usbcore: registered new interface driver ums-alauda
[ 1.172249] usbcore: registered new interface driver ums-cypress
[ 1.172268] usbcore: registered new interface driver ums-datafab
[ 1.172289] usbcore: registered new interface driver ums-freecom
[ 1.172310] usbcore: registered new interface driver ums-isd200
[ 1.172330] usbcore: registered new interface driver ums-jumpshot
[ 1.172352] usbcore: registered new interface driver ums-karma
[ 1.172372] usbcore: registered new interface driver ums-onetouch
[ 1.172391] usbcore: registered new interface driver ums-sddr09
[ 1.172419] usbcore: registered new interface driver ums-sddr55
[ 1.172444] usbcore: registered new interface driver ums-usbat
[ 1.172521] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.205486] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.205487] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.449465] ata8: SATA link down (SStatus 0 SControl 330)
[ 1.455195] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.455328] mousedev: PS/2 mouse device common for all mice
[ 1.455586] rtc_cmos 00:04: RTC can wake from S4
[ 1.455675] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.455699] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.455719] md: linear personality registered for level -1
[ 1.455721] md: raid0 personality registered for level 0
[ 1.455722] md: raid1 personality registered for level 1
[ 1.455723] md: raid10 personality registered for level 10
[ 1.455724] md: raid6 personality registered for level 6
[ 1.455726] md: raid5 personality registered for level 5
[ 1.455727] md: raid4 personality registered for level 4
[ 1.455728] md: multipath personality registered for level -4
[ 1.455730] md: faulty personality registered for level -5
[ 1.455860] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.456499] cpuidle: using governor ladder
[ 1.457510] cpuidle: using governor menu
[ 1.457562] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 1.458220] usbcore: registered new interface driver usbhid
[ 1.458221] usbhid: USB HID core driver
[ 1.458309] TCP bic registered
[ 1.458311] NET: Registered protocol family 17
[ 1.458335] Registering the dns_resolver key type
[ 1.460147] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.460184] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.470793] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.470830] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.601989] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.602320] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 1.603602] ata1.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
[ 1.605454] ata1.00: configured for UDMA/100
[ 1.607827] ata7.00: ATA-8: KINGSTON SH100S3120G, 320ABBF0, max UDMA/133
[ 1.607831] ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.608329] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
[ 1.610340] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.610344] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.610459] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.610527] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.618235] ata7.00: configured for UDMA/133
[ 1.835815] Refined TSC clocksource calibration: 2833.697 MHz.
[ 1.835820] Switching to clocksource tsc
[ 2.065966] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.094818] ata2.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 2.094823] ata2.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.136923] ata2.00: configured for UDMA/133
[ 2.137017] scsi 1:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 2.137224] sd 1:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.137261] sd 1:0:0:0: [sda] Write Protect is off
[ 2.137263] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.137278] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.137289] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.181754] sda: sda1 sda2 sda3
[ 2.182360] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.592764] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.621570] ata3.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 2.621575] ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.663708] ata3.00: configured for UDMA/133
[ 2.663797] scsi 2:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 2.663965] sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.664032] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.664034] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.664037] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.664055] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.695294] sdb: sdb1 sdb2 sdb3
[ 2.695870] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.966714] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.269407] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.572104] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.572201] scsi 6:0:0:0: Direct-Access ATA KINGSTON SH100S3 320A PQ: 0 ANSI: 5
[ 3.572460] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 3.572464] sd 6:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 3.572560] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.572562] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.572572] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.575153] sdc: unknown partition table
[ 3.575432] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 3.895920] registered taskstats version 1
[ 3.906480] rtc_cmos 00:04: setting system clock to 2012-01-28 09:54:12 UTC (1327744452)
[ 3.909780] md: Waiting for all devices to be available before autodetect
[ 3.909781] md: If you don't use raid, use raid=noautodetect
[ 3.909910] md: Autodetecting RAID arrays.
[ 3.942777] md: Scanned 2 and added 2 devices.
[ 3.942779] md: autorun ...
[ 3.942781] md: considering sdb1 ...
[ 3.942787] md: adding sdb1 ...
[ 3.942791] md: adding sda2 ...
[ 3.942795] md: created md0
[ 3.942797] md: bind
[ 3.942815] md: bind
[ 3.942825] md: running:
[ 3.942885] bio: create slab at 1
[ 3.942893] md/raid0:md0: md_size is 4095997952 sectors.
[ 3.942896] md: RAID0 configuration for md0 - 1 zone
[ 3.942898] md: zone0=[sda2/sdb1]
[ 3.942902] zone-offset= 0KB, device-offset= 0KB, size=2047998976KB
[ 3.942905]
[ 3.942912] md0: detected capacity change from 0 to 2097150951424
[ 3.942950] md: ... autorun DONE.
[ 3.968475] md0: unknown partition table
[ 3.984334] EXT4-fs (md0): INFO: recovery required on readonly filesystem
[ 3.984336] EXT4-fs (md0): write access will be enabled during recovery
[ 6.802325] EXT4-fs (md0): recovery complete
[ 6.803488] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 6.803505] VFS: Mounted root (ext4 filesystem) readonly on device 9:0.
[ 6.804246] Freeing unused kernel memory: 588k freed
[ 6.804310] BFS CPU scheduler v0.416 by Con Kolivas.
[ 6.853552] Failed to execute /linuxrc. Attempting defaults...
[ 11.131202] udevd[1815]: starting version 171
[ 13.953243] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 13.953272] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 13.953419] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 13.953421] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 13.953469] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 13.953490] ehci_hcd 0000:00:1a.7: debug port 1
[ 13.957362] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 13.957367] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000
[ 13.966560] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 13.966583] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.966586] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.966589] usb usb1: Product: EHCI Host Controller
[ 13.966592] usb usb1: Manufacturer: Linux 3.2.1-gentoo-ck1 ehci_hcd
[ 13.966594] usb usb1: SerialNumber: 0000:00:1a.7
[ 13.966666] hub 1-0:1.0: USB hub found
[ 13.966669] hub 1-0:1.0: 6 ports detected
[ 13.966770] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 13.966937] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 13.966951] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 13.966979] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 13.966998] ehci_hcd 0000:00:1d.7: debug port 1
[ 13.970868] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 13.970879] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000
[ 13.980086] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 13.980129] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.980132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.980135] usb usb2: Product: EHCI Host Controller
[ 13.980138] usb usb2: Manufacturer: Linux 3.2.1-gentoo-ck1 ehci_hcd
[ 13.980140] usb usb2: SerialNumber: 0000:00:1d.7
[ 13.980252] hub 2-0:1.0: USB hub found
[ 13.980254] hub 2-0:1.0: 6 ports detected
[ 14.087934] EDAC MC: Ver: 2.1.0
[ 14.091440] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[ 14.091467] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[ 14.091477] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 14.152603] iTCO_vendor_support: vendor-support=0
[ 14.164751] uhci_hcd: USB Universal Host Controller Interface driver
[ 14.164779] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.164786] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 14.164788] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 14.164826] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 14.164851] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 14.164878] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.164880] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.164882] usb usb3: Product: UHCI Host Controller
[ 14.164883] usb usb3: Manufacturer: Linux 3.2.1-gentoo-ck1 uhci_hcd
[ 14.164888] usb usb3: SerialNumber: 0000:00:1a.0
[ 14.164962] hub 3-0:1.0: USB hub found
[ 14.164966] hub 3-0:1.0: 2 ports detected
[ 14.165054] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 14.165059] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 14.165062] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 14.165088] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 14.165117] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 14.165141] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.165143] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.165145] usb usb4: Product: UHCI Host Controller
[ 14.165146] usb usb4: Manufacturer: Linux 3.2.1-gentoo-ck1 uhci_hcd
[ 14.165148] usb usb4: SerialNumber: 0000:00:1a.1
[ 14.165207] hub 4-0:1.0: USB hub found
[ 14.165209] hub 4-0:1.0: 2 ports detected
[ 14.165283] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 14.165287] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 14.165290] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 14.165317] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 14.165338] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 14.165360] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.165361] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.165363] usb usb5: Product: UHCI Host Controller
[ 14.165364] usb usb5: Manufacturer: Linux 3.2.1-gentoo-ck1 uhci_hcd
[ 14.165366] usb usb5: SerialNumber: 0000:00:1a.2
[ 14.165426] hub 5-0:1.0: USB hub found
[ 14.165428] hub 5-0:1.0: 2 ports detected
[ 14.165497] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 14.165502] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 14.165504] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.165529] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 14.165554] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 14.165575] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.165577] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.165579] usb usb6: Product: UHCI Host Controller
[ 14.165580] usb usb6: Manufacturer: Linux 3.2.1-gentoo-ck1 uhci_hcd
[ 14.165582] usb usb6: SerialNumber: 0000:00:1d.0
[ 14.165649] hub 6-0:1.0: USB hub found
[ 14.165652] hub 6-0:1.0: 2 ports detected
[ 14.165728] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 14.165733] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 14.165735] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.165761] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 14.165783] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 14.165805] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.165807] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.165809] usb usb7: Product: UHCI Host Controller
[ 14.165810] usb usb7: Manufacturer: Linux 3.2.1-gentoo-ck1 uhci_hcd
[ 14.165811] usb usb7: SerialNumber: 0000:00:1d.1
[ 14.165872] hub 7-0:1.0: USB hub found
[ 14.165874] hub 7-0:1.0: 2 ports detected
[ 14.165994] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 14.165999] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 14.166001] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.166030] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 14.166051] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 14.166073] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.166075] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.166076] usb usb8: Product: UHCI Host Controller
[ 14.166078] usb usb8: Manufacturer: Linux 3.2.1-gentoo-ck1 uhci_hcd
[ 14.166079] usb usb8: SerialNumber: 0000:00:1d.2
[ 14.166137] hub 8-0:1.0: USB hub found
[ 14.166140] hub 8-0:1.0: 2 ports detected
[ 14.178750] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.178862] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 14.178865] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 14.178907] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 14.179012] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfb9fe000
[ 14.179051] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 14.179055] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 14.179059] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 14.179062] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
[ 14.179066] xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
[ 14.179070] xhci_hcd 0000:02:00.0: irq 52 for MSI/MSI-X
[ 14.179074] xhci_hcd 0000:02:00.0: irq 53 for MSI/MSI-X
[ 14.179078] xhci_hcd 0000:02:00.0: irq 54 for MSI/MSI-X
[ 14.179157] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
[ 14.179159] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.179160] usb usb9: Product: xHCI Host Controller
[ 14.179162] usb usb9: Manufacturer: Linux 3.2.1-gentoo-ck1 xhci_hcd
[ 14.179163] usb usb9: SerialNumber: 0000:02:00.0
[ 14.179267] xHCI xhci_add_endpoint called for root hub
[ 14.179268] xHCI xhci_check_bandwidth called for root hub
[ 14.179287] hub 9-0:1.0: USB hub found
[ 14.179292] hub 9-0:1.0: 2 ports detected
[ 14.179380] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 14.179402] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10
[ 14.182383] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
[ 14.182385] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.182387] usb usb10: Product: xHCI Host Controller
[ 14.182388] usb usb10: Manufacturer: Linux 3.2.1-gentoo-ck1 xhci_hcd
[ 14.182389] usb usb10: SerialNumber: 0000:02:00.0
[ 14.182441] xHCI xhci_add_endpoint called for root hub
[ 14.182443] xHCI xhci_check_bandwidth called for root hub
[ 14.182460] hub 10-0:1.0: USB hub found
[ 14.182468] hub 10-0:1.0: 2 ports detected
[ 14.186110] firewire_ohci 0000:10:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.188275] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.188366] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
[ 14.188383] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 14.229010] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 14.229143] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 14.236322] firewire_ohci: Added fw-ohci device 0000:10:06.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 14.259898] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 14.265844] Error: Driver 'pcspkr' is already registered, aborting...
[ 14.283293] hda_codec: ALC889: BIOS auto-probing.
[ 14.289218] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 14.289301] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 14.289306] snd_hda_intel 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.289308] hda_intel: Disabling MSI
[ 14.289399] snd_hda_intel 0000:05:00.1: setting latency timer to 64
[ 14.297473] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 14.297490] r8169 0000:0e:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.297615] r8169 0000:0e:00.0: setting latency timer to 64
[ 14.297671] r8169 0000:0e:00.0: irq 56 for MSI/MSI-X
[ 14.297753] r8169 0000:0e:00.0: eth0: RTL8168e/8111e at 0xffffc90005788000, 6c:f0:49:e8:f8:64, XID 0c100000 IRQ 56
[ 14.297758] r8169 0000:0e:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 14.297768] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 14.297785] r8169 0000:0f:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.297811] r8169 0000:0f:00.0: setting latency timer to 64
[ 14.297899] r8169 0000:0f:00.0: irq 57 for MSI/MSI-X
[ 14.298006] r8169 0000:0f:00.0: eth1: RTL8168e/8111e at 0xffffc9000578a000, 6c:f0:49:e8:f8:66, XID 0c100000 IRQ 57
[ 14.298011] r8169 0000:0f:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 14.448240] Disabling lock debugging due to kernel taint
[ 14.448245] nvidia: module license 'NVIDIA' taints kernel.
[ 14.466670] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 14.551291] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.560541] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.569866] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.579182] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.583931] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input4
[ 14.584033] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input5
[ 14.584140] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input6
[ 14.584206] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.0/0000:04:00.0/0000:05:00.1/sound/card1/input7
[ 14.585549] nvidia 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.585558] nvidia 0000:05:00.0: setting latency timer to 64
[ 14.585563] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 14.585684] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
[ 14.700082] usb 6-1: New USB device found, idVendor=0a12, idProduct=0001
[ 14.700084] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 14.737808] firewire_core: created device fw0: GUID 00e9ddc5006cf049, S400
[ 14.782174] Bluetooth: Core ver 2.16
[ 14.782184] NET: Registered protocol family 31
[ 14.782185] Bluetooth: HCI device and connection manager initialized
[ 14.782187] Bluetooth: HCI socket layer initialized
[ 14.782188] Bluetooth: L2CAP socket layer initialized
[ 14.782191] Bluetooth: SCO socket layer initialized
[ 14.813062] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 14.813159] usbcore: registered new interface driver btusb
[ 14.903913] usb 7-2: new low-speed USB device number 2 using uhci_hcd
[ 15.067011] usb 7-2: New USB device found, idVendor=046d, idProduct=c517
[ 15.067015] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 15.067019] usb 7-2: Product: USB Receiver
[ 15.067021] usb 7-2: Manufacturer: Logitech
[ 15.084150] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input8
[ 15.084198] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[ 15.115896] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 15.116301] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input9
[ 15.116392] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[ 16.982273] EXT4-fs (md0): re-mounted. Opts: (null)
[ 17.253691] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 24.122873] usbcore: registered new interface driver snd-usb-audio
[ 25.785977] NET: Registered protocol family 10
[ 26.219313] Adding 8191996k swap on /dev/sda3. Priority:-1 extents:1 across:8191996k
[ 26.291466] Adding 8191996k swap on /dev/sdb2. Priority:-2 extents:1 across:8191996k
[ 37.183873] r8169 0000:0e:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-1.fw (-2)
[ 37.197805] r8169 0000:0e:00.0: eth0: link down
[ 37.197810] r8169 0000:0e:00.0: eth0: link down
[ 37.198495] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.321019] r8169 0000:0e:00.0: eth0: link up
[ 39.321569] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 42.289309] r8169 0000:0e:00.0: eth0: link down
[ 42.289315] r8169 0000:0e:00.0: eth0: link down
[ 42.290153] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.323937] r8169 0000:0e:00.0: eth0: link down
[ 42.323942] r8169 0000:0e:00.0: eth0: link down
[ 42.324603] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.026215] r8169 0000:0e:00.0: eth0: link up
[ 45.026787] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 55.786422] eth0: no IPv6 routers present
[ 241.908369] usb 6-1: USB disconnect, device number 2
[ 244.108179] usb 6-1: new full-speed USB device number 3 using uhci_hcd
[ 244.701633] usb 6-1: New USB device found, idVendor=0a12, idProduct=0001
[ 244.701638] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 244.823159] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 244.823161] Bluetooth: BNEP filters: protocol multicast
[ 244.914312] Bluetooth: RFCOMM TTY layer initialized
[ 244.914317] Bluetooth: RFCOMM socket layer initialized
[ 244.914320] Bluetooth: RFCOMM ver 1.11
[ 250.595786] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 250.596233] input: Bluetooth Optic Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:43/input10
[ 250.596335] generic-bluetooth 0005:1131:5035.0003: input,hidraw2: BLUETOOTH HID v5.15 Mouse [Bluetooth Optic Mouse] on 00:10:60:D1:EA:08
[ 253.741755] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:46/input11
[ 253.741848] generic-bluetooth 0005:045E:0762.0004: input,hidraw3: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 00:10:60:D1:EA:08
[ 271.863330] ata2.00: configured for UDMA/133
[ 271.863336] ata2: EH complete
[ 272.143236] ata3.00: configured for UDMA/133
[ 272.143242] ata3: EH complete
[ 272.190871] ata7.00: configured for UDMA/133
[ 272.190876] ata7: EH complete
[ 272.566473] EXT4-fs (md0): re-mounted. Opts: commit=0
[ 272.644912] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 2579.418030] input: Bluetooth Optic Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:43/input12
[ 2579.418104] generic-bluetooth 0005:1131:5035.0005: input,hidraw2: BLUETOOTH HID v5.15 Mouse [Bluetooth Optic Mouse] on 00:10:60:D1:EA:08
[ 2586.466830] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:46/input13
[ 2586.466927] generic-bluetooth 0005:045E:0762.0006: input,hidraw3: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 00:10:60:D1:EA:08
[ 2622.010780] fuse init (API version 7.17)
[ 2622.471083] EXT4-fs (dm-2): warning: maximal mount count reached, running e2fsck is recommended
[ 2622.471658] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 3642.493493] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:46/input14
[ 3642.493607] generic-bluetooth 0005:045E:0762.0007: input,hidraw3: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 00:10:60:D1:EA:08
[ 5179.695419] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:46/input15
[ 5179.695487] generic-bluetooth 0005:045E:0762.0008: input,hidraw3: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 00:10:60:D1:EA:08
[ 8557.113549] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:47/input16
[ 8557.113610] generic-bluetooth 0005:045E:0762.0009: input,hidraw3: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 00:10:60:D1:EA:08
[10156.081167] libfcoe_device_notification: NETDEV_UNREGISTER lo
[12438.507730] conftest[17021]: segfault at 1 ip 00007fb349f171e8 sp 00007fff0b953640 error 4 in libc-client.so.1.0.0[7fb349ec8000+127000]
[12482.344878] conftest[30317]: segfault at 1 ip 00007f06dc40e1e8 sp 00007fff53f5b970 error 4 in libc-client.so.1.0.0[7f06dc3bf000+127000]
[12524.748594] conftest[11147]: segfault at 1 ip 00007fde4360e1e8 sp 00007fff520adda0 error 4 in libc-client.so.1.0.0[7fde435bf000+127000]
[19427.421773] input: Bluetooth Optic Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:43/input17
[19427.421878] generic-bluetooth 0005:1131:5035.000A: input,hidraw2: BLUETOOTH HID v5.15 Mouse [Bluetooth Optic Mouse] on 00:10:60:D1:EA:08
[19736.461332] libfcoe_device_notification: NETDEV_UNREGISTER lo
[19784.743934] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:46/input18
[19784.743995] generic-bluetooth 0005:045E:0762.000B: input,hidraw3: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 00:10:60:D1:EA:08
[32451.533417] input: Bluetooth Optic Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:43/input19
[32451.533520] generic-bluetooth 0005:1131:5035.000C: input,hidraw2: BLUETOOTH HID v5.15 Mouse [Bluetooth Optic Mouse] on 00:10:60:D1:EA:08
[32454.689305] input: Microsoft Bluetooth Mobile Keyboard 6000 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:46/input20
[32454.689399] generic-bluetooth 0005:045E:0762.000D: input,hidraw3: BLUETOOTH HID v0.13 Keyboard [Microsoft Bluetooth Mobile Keyboard 6000] on 00:10:60:D1:EA:08
[32492.403837] libfcoe_device_notification: NETDEV_UNREGISTER lo
[34238.558192] libfcoe_device_notification: NETDEV_UNREGISTER lo
[48560.191519] input: Bluetooth Optic Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:43/input21
[48560.191622] generic-bluetooth 0005:1131:5035.000E: input,hidraw2: BLUETOOTH HID v5.15 Mouse [Bluetooth Optic Mouse] on 00:10:60:D1:EA:08
[55304.113792] EXT4-fs (md0): Unaligned AIO/DIO on inode 13107980 by fio; performance will be poor.