dmesg - bionsey
new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f400 - 000000000009ffff
reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0x00000000-0xffffffff disabled]
pnp 00:01: [mem 0x00000000-0xffffffff disabled]
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [mem 0xfed00000-0xfed003ff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
pnp 00:07: [mem 0xfec00000-0xfec00fff]
pnp 00:07: [mem 0xfee00000-0xfee00fff]
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00b1]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x040b]
pnp 00:08: [io 0x04d6]
pnp 00:08: [io 0x0c00-0x0c01]
pnp 00:08: [io 0x0c14]
pnp 00:08: [io 0x0c50-0x0c51]
pnp 00:08: [io 0x0c52]
pnp 00:08: [io 0x0c6c]
pnp 00:08: [io 0x0c6f]
pnp 00:08: [io 0x0cd0-0x0cd1]
pnp 00:08: [io 0x0cd2-0x0cd3]
pnp 00:08: [io 0x0cd4-0x0cd5]
pnp 00:08: [io 0x0cd6-0x0cd7]
pnp 00:08: [io 0x0cd8-0x0cdf]
pnp 00:08: [io 0x0800-0x089f]
pnp 00:08: [io 0x0000-0xffffffff disabled]
pnp 00:08: [io 0x0b00-0x0b0f]
pnp 00:08: [io 0x0b20-0x0b3f]
pnp 00:08: [io 0x0900-0x090f]
pnp 00:08: [io 0x0910-0x091f]
pnp 00:08: [io 0xfe00-0xfefe]
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [mem 0xffb80000-0xffbfffff]
pnp 00:08: [mem 0xfec10000-0xfec1001f]
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x040b] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c51] has been reserved
system 00:08: [io 0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0800-0x089f] has been reserved
system 00:08: [io 0x0b00-0x0b0f] has been reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0900-0x090f] has been reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0000-0xffffffff disabled]
pnp 00:09: [io 0x0e80-0x0f5f]
pnp 00:09: [io 0x0ae0-0x0aef]
system 00:09: [io 0x0e80-0x0f5f] has been reserved
system 00:09: [io 0x0ae0-0x0aef] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xe0000000-0xefffffff]
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0x00000000-0x0009ffff]
pnp 00:0b: [mem 0x000c0000-0x000cffff]
pnp 00:0b: [mem 0x000e0000-0x000fffff]
pnp 00:0b: [mem 0x00100000-0xcfffffff]
pnp 00:0b: [mem 0xfec00000-0xffffffff]
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02-02]
pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:05.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:05.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 03-03]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:06.0: bridge window [mem pref disabled]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:14.4: bridge window [io disabled]
pci 0000:00:14.4: bridge window [mem disabled]
pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff pref]
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1000k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
microcode: CPU0: patch_level=0x010000c7
microcode: CPU1: patch_level=0x010000c7
microcode: Microcode Update Driver: v2.00 , Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1327142556.616:1): initialized
highmem bounce pool size: 64 pages
fuse init (API version 7.16)
SGI XFS with security attributes, large block/inode numbers, no debug enabled
Btrfs loaded
msgmni has been set to 1706
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
Real Time Clock Driver v1.12b
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI: processor limited to max C-state 1
loop: module loaded
Uniform Multi-Platform E-IDE driver
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xf801e000, 40:61:86:5c:d6:20, XID 081000c0 IRQ 42
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.0.6-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.0.6-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.0.6-gentoo ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.0.6-gentoo ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.0.6-gentoo ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.0.6-gentoo ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fa000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.0.6-gentoo ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Linux video capture interface: v2.00
i2c-core: driver [msp3400] using legacy suspend method
i2c-core: driver [msp3400] using legacy resume method
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Bt87x 0000:04:06.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
bt87x0: Using board 1, analog, digital (rate 32000 Hz)
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
usb 1-5: new high speed USB device number 2 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
hda_codec: ALC889: BIOS auto-probing.
ALSA device list:
#0: HDA ATI SB at 0xfe7f4000 irq 16
#1: Brooktree Bt878 at 0xfdffe000, irq 21
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
powernow-k8: Found 1 AMD Athlon(tm) II X2 240e Processor (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2800 MHz)
powernow-k8: 1 : pstate 1 (2100 MHz)
powernow-k8: 2 : pstate 2 (1600 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
usb 1-5: New USB device found, idVendor=0424, idProduct=2514
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
ata1.00: ATA-8: OCZ-SOLID3, 2.11, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-SOLID3 2.11 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 368k freed
usb 4-3: new full speed USB device number 2 using ohci_hcd
Refined TSC clocksource calibration: 2800.116 MHz.
Switching to clocksource tsc
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usb 4-3: New USB device found, idVendor=046a, idProduct=0052
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: Wireless Keyboard and Mouse
usb 4-3: Manufacturer: Cherry
input: Cherry Wireless Keyboard and Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input2
generic-usb 0003:046A:0052.0001: input: USB HID v1.10 Keyboard [Cherry Wireless Keyboard and Mouse] on usb-0000:00:12.1-3/input0
input: Cherry Wireless Keyboard and Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input3
generic-usb 0003:046A:0052.0002: input: USB HID v1.10 Mouse [Cherry Wireless Keyboard and Mouse] on usb-0000:00:12.1-3/input1
ata5.01: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB02, max UDMA/33
ata5.01: configured for UDMA/33
scsi 4:0:1:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB02 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:1:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:1:0: Attached scsi CD-ROM sr0
usb 6-2: new low speed USB device number 2 using ohci_hcd
usb 6-2: New USB device found, idVendor=046a, idProduct=0101
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Wireless Desktop
usb 6-2: Manufacturer: MLK
input: MLK Wireless Desktop as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input4
generic-usb 0003:046A:0101.0003: input: USB HID v1.00 Keyboard [MLK Wireless Desktop] on usb-0000:00:13.1-2/input0
input: MLK Wireless Desktop as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/input/input5
generic-usb 0003:046A:0101.0004: input: USB HID v1.00 Mouse [MLK Wireless Desktop] on usb-0000:00:13.1-2/input1
usb 1-5.1: new high speed USB device number 4 using ehci_hcd
EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
usb 1-5.1: New USB device found, idVendor=0424, idProduct=2640
usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5.1:1.0: USB hub found
hub 1-5.1:1.0: 2 ports detected
EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 1-5.1.1: new high speed USB device number 5 using ehci_hcd
usb 1-5.1.1: New USB device found, idVendor=0424, idProduct=4064
usb 1-5.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.1.1: Product: Ultra Fast Media Reader
usb 1-5.1.1: Manufacturer: Generic
usb 1-5.1.1: SerialNumber: 000000264001
scsi6 : usb-storage 1-5.1.1:1.0
usb 1-5.1.2: new full speed USB device number 6 using ehci_hcd
udev[2354]: starting version 164
usb 1-5.1.2: New USB device found, idVendor=0a12, idProduct=0001
usb 1-5.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:01:05.0: setting latency timer to 64
[drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1462:0x7596).
[drm] register mmio base: 0xFE9F0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 436956 kiB.
[TTM] Zone highmem: Available graphics memory: 1686016 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
IR NEC protocol handler initialized
bttv: driver version 0.9.18 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv 0000:04:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
bttv0: Bt878 (rev 17) at 0000:04:06.0, irq: 21, latency: 64, mmio: 0xfdfff000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
IR RC5(x) protocol handler initialized
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
IR RC6 protocol handler initialized
radeon 0000:01:05.0: WB enabled
tveeprom 1-0050: Hauppauge model 44354, rev C242, serial# 3902432
tveeprom 1-0050: tuner model is Temic 4009FR5 (idx 42, type 20)
tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 1-0050: audio processor is MSP3415 (idx 6)
tveeprom 1-0050: has radio
bttv0: Hauppauge eeprom indicates model#44354
bttv0: tuner type=20
IR JVC protocol handler initialized
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] DVI-D
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
msp3400 1-0040: MSP3415G-B8 found @ 0x80 (bt878 #0 [sw])
msp3400 1-0040: msp3400 supports nicam and radio, mode is autodetect and autoselect
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
IR Sony protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 253
IR LIRC bridge handler initialized
tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
[drm] Radeon display connector DVI-D-1: Found valid EDID
[drm] radeon: power management initialized
tuner-simple 1-0061: creating new instance
tuner-simple 1-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 16384000
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x100
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.10.0 20080528 for 0000:01:05.0 on minor 0
scsi 6:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.90 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sda2): re-mounted. Opts: discard
Adding 4194300k swap on /dev/sda1. Priority:-1 extents:1 across:4194300k SSD
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
f71882fg: Found f71889fg chip at 0xe80, revision 21
f71882fg f71882fg.3712: Fan: 1 is in duty-cycle mode
f71882fg f71882fg.3712: Fan: 2 is in duty-cycle mode
f71882fg f71882fg.3712: Fan: 3 is in duty-cycle mode
r8169 0000:02:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link up
ata1.00: configured for UDMA/133
ata1: EH complete
EXT4-fs (sda2): re-mounted. Opts: discard,commit=0
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
usb 1-4: new high speed USB device number 7 using ehci_hcd
usb 1-4: New USB device found, idVendor=04e8, idProduct=681d
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: SAMSUNG_Android
usb 1-4: Manufacturer: SAMSUNG
usb 1-4: SerialNumber: 33311F3F439D00EC
scsi7 : usb-storage 1-4:1.0
scsi 7:0:0:0: Direct-Access Android UMS Composite 0001 PQ: 0 ANSI: 2
scsi 7:0:0:1: Direct-Access Android UMS Composite 0001 PQ: 0 ANSI: 2
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:1: Attached scsi generic sg4 type 0
sd 7:0:0:0: [sdc] Attached SCSI removable disk
sd 7:0:0:1: [sdd] Attached SCSI removable disk
sd 7:0:0:0: [sdc] 12124096 512-byte logical blocks: (6.20 GB/5.78 GiB)
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc:
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link up
usb 1-4: USB disconnect, device number 7
sd 7:0:0:0: [sdc] Synchronizing SCSI cache
sd 7:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
usb 1-4: new high speed USB device number 8 using ehci_hcd
usb 1-4: New USB device found, idVendor=04e8, idProduct=681d
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: SAMSUNG_Android
usb 1-4: Manufacturer: SAMSUNG
usb 1-4: SerialNumber: 33311F3F439D00EC
scsi8 : usb-storage 1-4:1.0
scsi 8:0:0:0: Direct-Access Android UMS Composite 0001 PQ: 0 ANSI: 2
scsi 8:0:0:1: Direct-Access Android UMS Composite 0001 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:1: Attached scsi generic sg4 type 0
sd 8:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:1: [sdd] Attached SCSI removable disk
sd 8:0:0:0: [sdc] 12124096 512-byte logical blocks: (6.20 GB/5.78 GiB)
sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc:
usb 6-2: USB disconnect, device number 2
usb 6-2: new low speed USB device number 3 using ohci_hcd
usb 6-2: New USB device found, idVendor=046a, idProduct=0101
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Wireless Desktop
usb 6-2: Manufacturer: MLK
input: MLK Wireless Desktop as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input6
generic-usb 0003:046A:0101.0005: input: USB HID v1.00 Keyboard [MLK Wireless Desktop] on usb-0000:00:13.1-2/input0
input: MLK Wireless Desktop as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/input/input7
generic-usb 0003:046A:0101.0006: input: USB HID v1.00 Mouse [MLK Wireless Desktop] on usb-0000:00:13.1-2/input1
libjpeg.so.62[28031]: segfault at 1 ip 00000001 sp bfd60064 error 4
usb 1-5.1: clear tt 1 (9062) error -71
usb 1-5.1: clear tt 1 (9062) error -71
usb 1-5.1: clear tt 1 (9062) error -71
usb 1-5.1: clear tt 1 (9062) error -71
usb 1-5.1: clear tt 1 (9062) error -71
usb 1-5.1: clear tt 1 (9062) error -71
usb 1-5.1: clear tt 1 (9062) error -71
usb 1-5.1: clear tt 1 (9062) error -71
usb 1-5.1: clear tt 1 (9062) error -71
usb 1-5.1: clear tt 1 (9062) error -71
usb 1-5.1: clear tt 1 (9062) error -71
usb 1-5.1: USB disconnect, device number 4
usb 1-5.1.1: USB disconnect, device number 5
btusb_intr_complete: hci0 urb f4429340 failed to resubmit (19)
usb 1-5.1: clear tt 1 (9062) error -71
btusb_bulk_complete: hci0 urb f4f66f40 failed to resubmit (19)
usb 1-5.1: clear tt 1 (9062) error -19
btusb_bulk_complete: hci0 urb f46813c0 failed to resubmit (19)
usb 1-5.1: clear tt 1 (9062) error -19
usb 1-5.1.2: USB disconnect, device number 6
btusb_send_frame: hci0 urb f4f62640 submission failed
hub 1-5:1.0: hub_port_status failed (err = -71)
hub 1-5:1.0: connect-debounce failed, port 1 disabled
usb 1-5: USB disconnect, device number 2
usb 1-4: USB disconnect, device number 8
sd 8:0:0:0: [sdc] Synchronizing SCSI cache
sd 8:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
usb 1-5: new high speed USB device number 9 using ehci_hcd
usb 1-5: New USB device found, idVendor=0424, idProduct=2514
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-5.1: new high speed USB device number 10 using ehci_hcd
usb 1-5.1: New USB device found, idVendor=0424, idProduct=2640
usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5.1:1.0: USB hub found
hub 1-5.1:1.0: 2 ports detected
usb 1-5.1.1: new high speed USB device number 11 using ehci_hcd
usb 1-5.1.1: New USB device found, idVendor=0424, idProduct=4064
usb 1-5.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5.1.1: Product: Ultra Fast Media Reader
usb 1-5.1.1: Manufacturer: Generic
usb 1-5.1.1: SerialNumber: 000000264001
scsi9 : usb-storage 1-5.1.1:1.0
usb 1-5.1.2: new full speed USB device number 12 using ehci_hcd
usb 1-5.1.2: New USB device found, idVendor=0a12, idProduct=0001
usb 1-5.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
scsi 9:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.90 PQ: 0 ANSI: 0
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdb] Attached SCSI removable disk