dmesg - asd
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.39.4 (root@free.ds) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #3 SMP Thu Jan 5 10:23:00 MSK 2012
[ 0.000000] Command line: ro root=/dev/sda3
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000da94b000 (usable)
[ 0.000000] BIOS-e820: 00000000da94b000 - 00000000da996000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da996000 - 00000000da99e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000da99e000 - 00000000dabbb000 (reserved)
[ 0.000000] BIOS-e820: 00000000dabbb000 - 00000000dabbc000 (usable)
[ 0.000000] BIOS-e820: 00000000dabbc000 - 00000000dabcc000 (reserved)
[ 0.000000] BIOS-e820: 00000000dabcc000 - 00000000dabda000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dabda000 - 00000000dac02000 (reserved)
[ 0.000000] BIOS-e820: 00000000dac02000 - 00000000dac45000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dac45000 - 00000000dae80000 (reserved)
[ 0.000000] BIOS-e820: 00000000dae80000 - 00000000db000000 (usable)
[ 0.000000] BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000021fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: /DH61SA, BIOS BEH6110H.86A.0034.2011.1018.1937 10/18/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 21FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fce20] fce20
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 8192
[ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000
[ 0.000000] 0000000000 - 00db000000 page 2M
[ 0.000000] kernel direct mapping tables up to db000000 @ daffb000-db000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000021fe00000
[ 0.000000] 0100000000 - 021fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 21fe00000 @ 21fdf6000-21fe00000
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000da996068 0004C (v01 INTEL DH61SA 00000034 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000da99d320 000F4 (v04 INTEL DH61SA 00000034 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000da996140 071DB (v02 INTEL DH61SA 00000012 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000dabd1f80 00040
[ 0.000000] ACPI: APIC 00000000da99d418 00072 (v03 INTEL DH61SA 00000034 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000da99d490 00102 (v01 INTEL DH61SA 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000da99d598 0003C (v01 INTEL DH61SA 00000034 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000da99d5d8 00038 (v01 INTEL DH61SA 00000034 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000021fe00000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-000000021fe00000
[ 0.000000] NODE_DATA [000000021fdfb000 - 000000021fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217400000-ffff88021e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0021fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000da94b
[ 0.000000] 0: 0x000dabbb -> 0x000dabbc
[ 0.000000] 0: 0x000dae80 -> 0x000db000
[ 0.000000] 0: 0x00100000 -> 0x0021fe00
[ 0.000000] On node 0 totalpages: 2073689
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2 pages reserved
[ 0.000000] DMA zone: 3923 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 876292 pages, LIFO batch:31
[ 0.000000] Normal zone: 16121 pages used for memmap
[ 0.000000] Normal zone: 1163015 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:1f31c000)
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 23 pages/cpu @ffff88021fa00000 s72768 r0 d21440 u524288
[ 0.000000] pcpu-alloc: s72768 r0 d21440 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2043230
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ro root=/dev/sda3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 8100296k/8910848k available (6066k kernel code, 616092k absent, 194460k reserved, 3649k data, 556k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3292.822 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.64 BogoMIPS (lpj=3292822)
[ 0.000186] pid_max: default: 32768 minimum: 301
[ 0.000297] Security Framework initialized
[ 0.000840] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002243] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002844] Mount-cache hash table entries: 256
[ 0.003010] Initializing cgroup subsys ns
[ 0.003103] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.003255] Initializing cgroup subsys cpuacct
[ 0.003348] Initializing cgroup subsys freezer
[ 0.003451] CPU: Physical Processor ID: 0
[ 0.003543] CPU: Processor Core ID: 0
[ 0.003636] mce: CPU supports 9 MCE banks
[ 0.003736] CPU0: Thermal monitoring enabled (TM1)
[ 0.003832] using mwait in idle threads.
[ 0.003971] ACPI: Core revision 20110316
[ 0.229515] Setting APIC routing to flat
[ 0.229949] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.240013] CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
[ 0.341094] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.341358] ... version: 3
[ 0.341449] ... bit width: 48
[ 0.341539] ... generic registers: 8
[ 0.341630] ... value mask: 0000ffffffffffff
[ 0.341721] ... max period: 000000007fffffff
[ 0.341813] ... fixed-purpose events: 3
[ 0.341904] ... event mask: 00000007000000ff
[ 0.342082] Booting Node 0, Processors #1
[ 0.342173] smpboot cpu 1: start_ip = 9b000
[ 0.432895] #2
[ 0.432941] smpboot cpu 2: start_ip = 9b000
[ 0.523562] #3 Ok.
[ 0.523652] smpboot cpu 3: start_ip = 9b000
[ 0.614252] Brought up 4 CPUs
[ 0.614343] Total of 4 processors activated (26338.22 BogoMIPS).
[ 0.615848] xor: automatically using best checksumming function: generic_sse
[ 0.620149] generic_sse: 14704.000 MB/sec
[ 0.620241] xor: using function: generic_sse (14704.000 MB/sec)
[ 0.620361] NET: Registered protocol family 16
[ 0.620607] ACPI: bus type pci registered
[ 0.620740] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.620883] PCI: not using MMCONFIG
[ 0.620972] PCI: Using configuration type 1 for base access
[ 0.623962] bio: create slab at 0
[ 0.640088] raid6: int64x1 3523 MB/s
[ 0.657031] raid6: int64x2 3464 MB/s
[ 0.673968] raid6: int64x4 3187 MB/s
[ 0.690917] raid6: int64x8 2457 MB/s
[ 0.707856] raid6: sse2x1 8894 MB/s
[ 0.724797] raid6: sse2x2 10925 MB/s
[ 0.741737] raid6: sse2x4 12750 MB/s
[ 0.741830] raid6: using algorithm sse2x4 (12750 MB/s)
[ 0.742559] ACPI: EC: Look up EC in DSDT
[ 0.743287] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.745352] ACPI: SSDT 00000000dabd0c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.745751] ACPI: Dynamic OEM Table Load:
[ 0.745927] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.746167] ACPI: SSDT 00000000dabd1e18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.746527] ACPI: Dynamic OEM Table Load:
[ 0.746700] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.747290] ACPI: Interpreter enabled
[ 0.747381] ACPI: (supports S0 S5)
[ 0.747558] ACPI: Using IOAPIC for interrupt routing
[ 0.747663] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.747853] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[ 0.753423] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.756988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.757289] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.757541] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
[ 0.757637] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
[ 0.757733] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
[ 0.757830] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.757926] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.758066] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.758207] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xffffffff]
[ 0.759610] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[ 0.759635] pci 0000:00:02.0: [8086:0102] type 0 class 0x000300
[ 0.759642] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.759647] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.759650] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.759711] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.759742] pci 0000:00:16.0: reg 10: [mem 0xfe429000-0xfe42900f 64bit]
[ 0.759829] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.759834] pci 0000:00:16.0: PME# disabled
[ 0.759877] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200
[ 0.759904] pci 0000:00:19.0: reg 10: [mem 0xfe400000-0xfe41ffff]
[ 0.759916] pci 0000:00:19.0: reg 14: [mem 0xfe428000-0xfe428fff]
[ 0.759928] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f]
[ 0.760005] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.760010] pci 0000:00:19.0: PME# disabled
[ 0.760041] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.760070] pci 0000:00:1a.0: reg 10: [mem 0xfe427000-0xfe4273ff]
[ 0.760173] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.760178] pci 0000:00:1a.0: PME# disabled
[ 0.760209] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.760231] pci 0000:00:1b.0: reg 10: [mem 0xfe420000-0xfe423fff 64bit]
[ 0.760314] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.760318] pci 0000:00:1b.0: PME# disabled
[ 0.760343] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.760436] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.760440] pci 0000:00:1c.0: PME# disabled
[ 0.760487] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.760516] pci 0000:00:1d.0: reg 10: [mem 0xfe426000-0xfe4263ff]
[ 0.760619] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.760623] pci 0000:00:1d.0: PME# disabled
[ 0.760652] pci 0000:00:1f.0: [8086:1c5c] type 0 class 0x000601
[ 0.760807] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
[ 0.760838] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
[ 0.760850] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
[ 0.760861] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
[ 0.760873] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
[ 0.760885] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.760897] pci 0000:00:1f.2: reg 24: [mem 0xfe425000-0xfe4257ff]
[ 0.760953] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.760957] pci 0000:00:1f.2: PME# disabled
[ 0.760982] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.761005] pci 0000:00:1f.3: reg 10: [mem 0xfe424000-0xfe4240ff 64bit]
[ 0.761037] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.761167] pci 0000:01:00.0: [1283:8892] type 1 class 0x000604
[ 0.761344] pci 0000:01:00.0: supports D1 D2
[ 0.761345] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.761353] pci 0000:01:00.0: PME# disabled
[ 0.761385] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[ 0.761480] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.761485] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.761493] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.761702] pci 0000:01:00.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.761812] pci 0000:01:00.0: bridge window [io 0xfff000-0x0000] (disabled)
[ 0.761820] pci 0000:01:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.761835] pci 0000:01:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.761837] pci 0000:01:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.761839] pci 0000:01:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.761840] pci 0000:01:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.761841] pci 0000:01:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.761869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.761948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.761967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.BR21._PRT]
[ 0.762042] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.762222] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.764213] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.764833] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.765445] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.766018] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.766588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.767202] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.767900] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.768516] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.769165] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.769308] vgaarb: loaded
[ 0.769459] SCSI subsystem initialized
[ 0.769589] libata version 3.00 loaded.
[ 0.769653] usbcore: registered new interface driver usbfs
[ 0.769763] usbcore: registered new interface driver hub
[ 0.769872] usbcore: registered new device driver usb
[ 0.770021] PCI: Using ACPI for IRQ routing
[ 0.770113] PCI: pci_cache_line_size set to 64 bytes
[ 0.770161] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.770162] reserve RAM buffer: 00000000da94b000 - 00000000dbffffff
[ 0.770165] reserve RAM buffer: 00000000dabbc000 - 00000000dbffffff
[ 0.770167] reserve RAM buffer: 00000000db000000 - 00000000dbffffff
[ 0.770168] reserve RAM buffer: 000000021fe00000 - 000000021fffffff
[ 0.770259] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.770725] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.772823] Switching to clocksource hpet
[ 0.773637] Switched to NOHz mode on CPU #0
[ 0.773679] Switched to NOHz mode on CPU #2
[ 0.773708] Switched to NOHz mode on CPU #1
[ 0.773713] Switched to NOHz mode on CPU #3
[ 0.774061] pnp: PnP ACPI init
[ 0.774153] ACPI: bus type pnp registered
[ 0.774331] pnp 00:00: [bus 00-ff]
[ 0.774332] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.774334] pnp 00:00: [io 0x0000-0x03af window]
[ 0.774335] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 0.774336] pnp 00:00: [io 0x03b0-0x03df window]
[ 0.774337] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.774338] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.774339] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.774341] pnp 00:00: [mem 0xdfa00000-0xffffffff window]
[ 0.774342] pnp 00:00: [mem 0x00000000 window]
[ 0.774379] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.774414] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[ 0.774415] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.774416] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.774418] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.774419] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.774451] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.774547] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.774643] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.774740] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.774836] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.774932] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.775034] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.775035] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.775037] pnp 00:02: [io 0x0778-0x077f]
[ 0.775067] system 00:02: [io 0x0778-0x077f] has been reserved
[ 0.775162] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.775362] pnp 00:03: [io 0x03f8-0x03ff]
[ 0.775368] pnp 00:03: [irq 4]
[ 0.775369] pnp 00:03: [dma 0 disabled]
[ 0.775411] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.775639] pnp 00:04: [io 0x0378-0x037f]
[ 0.775643] pnp 00:04: [irq 5]
[ 0.775644] pnp 00:04: [dma 3]
[ 0.775740] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.775747] pnp 00:05: [dma 4]
[ 0.775748] pnp 00:05: [io 0x0000-0x000f]
[ 0.775749] pnp 00:05: [io 0x0081-0x0083]
[ 0.775750] pnp 00:05: [io 0x0087]
[ 0.775751] pnp 00:05: [io 0x0089-0x008b]
[ 0.775752] pnp 00:05: [io 0x008f]
[ 0.775753] pnp 00:05: [io 0x00c0-0x00df]
[ 0.775777] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.775782] pnp 00:06: [io 0x0070-0x0071]
[ 0.775786] pnp 00:06: [irq 8]
[ 0.775809] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.775813] pnp 00:07: [io 0x0061]
[ 0.775839] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.775852] pnp 00:08: [io 0x0010-0x001f]
[ 0.775853] pnp 00:08: [io 0x0022-0x003f]
[ 0.775854] pnp 00:08: [io 0x0044-0x005f]
[ 0.775855] pnp 00:08: [io 0x0062-0x0063]
[ 0.775856] pnp 00:08: [io 0x0065-0x006f]
[ 0.775857] pnp 00:08: [io 0x0072-0x007f]
[ 0.775858] pnp 00:08: [io 0x0080]
[ 0.775859] pnp 00:08: [io 0x0084-0x0086]
[ 0.775859] pnp 00:08: [io 0x0088]
[ 0.775860] pnp 00:08: [io 0x008c-0x008e]
[ 0.775861] pnp 00:08: [io 0x0090-0x009f]
[ 0.775862] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.775863] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.775864] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.775897] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.776016] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.776021] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.776025] pnp 00:09: [irq 13]
[ 0.776050] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.776159] pnp 00:0a: [io 0x0400-0x0453]
[ 0.776160] pnp 00:0a: [io 0x0458-0x047f]
[ 0.776161] pnp 00:0a: [io 0x1180-0x119f]
[ 0.776162] pnp 00:0a: [io 0x0500-0x057f]
[ 0.776164] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.776165] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[ 0.776166] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[ 0.776167] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.776198] system 00:0a: [io 0x0400-0x0453] has been reserved
[ 0.776293] system 00:0a: [io 0x0458-0x047f] has been reserved
[ 0.776387] system 00:0a: [io 0x1180-0x119f] has been reserved
[ 0.776482] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.776577] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.776673] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.776769] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.776865] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.776967] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.776989] pnp 00:0b: [io 0x0454-0x0457]
[ 0.777022] system 00:0b: [io 0x0454-0x0457] has been reserved
[ 0.777117] system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.777178] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 0.777210] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.777303] pnp: PnP ACPI: found 13 devices
[ 0.777395] ACPI: ACPI bus type pnp unregistered
[ 0.783826] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[ 0.783919] pci 0000:01:00.0: bridge window [io disabled]
[ 0.784036] pci 0000:01:00.0: bridge window [mem disabled]
[ 0.784137] pci 0000:01:00.0: bridge window [mem pref disabled]
[ 0.784246] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[ 0.784338] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.784438] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.784535] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.784646] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.784745] pci 0000:00:1c.0: setting latency timer to 64
[ 0.784757] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.784861] pci 0000:01:00.0: setting latency timer to 64
[ 0.784866] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.784868] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.784869] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.784870] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.784871] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.784873] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.784874] pci_bus 0000:00: resource 10 [mem 0xdfa00000-0xffffffff]
[ 0.784891] NET: Registered protocol family 2
[ 0.785132] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.785900] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.787044] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.787253] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.787350] TCP reno registered
[ 0.787448] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.787566] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.787724] NET: Registered protocol family 1
[ 0.787876] RPC: Registered udp transport module.
[ 0.787988] RPC: Registered tcp transport module.
[ 0.788082] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.788187] pci 0000:00:02.0: Boot video device
[ 0.788248] PCI: CLS 64 bytes, default 64
[ 0.788259] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.788356] Placing 64MB software IO TLB between ffff8800d694b000 - ffff8800da94b000
[ 0.788497] software IO TLB at phys 0xd694b000 - 0xda94b000
[ 0.789560] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x23
[ 0.789656] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x23
[ 0.789753] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x23
[ 0.789851] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x23
[ 0.789985] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 0.790197] audit: initializing netlink socket (disabled)
[ 0.790293] type=2000 audit(1326194396.410:1): initialized
[ 0.790700] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.792762] VFS: Disk quotas dquot_6.5.2
[ 0.792897] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.793668] NTFS driver 2.1.30 [Flags: R/W].
[ 0.793857] fuse init (API version 7.16)
[ 0.794061] msgmni has been set to 15820
[ 0.794351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.794493] io scheduler noop registered
[ 0.794584] io scheduler deadline registered
[ 0.794714] io scheduler cfq registered (default)
[ 0.794858] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.794926] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.795183] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.795327] ACPI: Power Button [PWRB]
[ 0.795453] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.795595] ACPI: Power Button [PWRF]
[ 0.795734] ACPI: acpi_idle registered with cpuidle
[ 0.795963] Monitor-Mwait will be used to enter C-2 state
[ 0.795985] Monitor-Mwait will be used to enter C-3 state
[ 1.061185] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.082018] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.082344] Non-volatile memory driver v1.3
[ 1.082437] Linux agpgart interface v0.103
[ 1.082591] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.082741] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.083566] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.083754] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.083903] [drm] Initialized drm 1.1.0 20060810
[ 1.084025] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.084125] i915 0000:00:02.0: setting latency timer to 64
[ 1.109227] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 1.109368] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 1.109790] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[ 1.109793] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.109893] [drm] Driver supports precise vblank timestamp query.
[ 1.134312] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.178665] fbcon: inteldrmfb (fb0) is primary device
[ 1.340496] Console: switching to colour frame buffer device 128x48
[ 1.341762] fb0: inteldrmfb frame buffer device
[ 1.341775] drm: registered panic notifier
[ 1.341792] No ACPI video bus found
[ 1.341836] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.342847] brd: module loaded
[ 1.343347] loop: module loaded
[ 1.343358] Compaq SMART2 Driver (v 2.6.0)
[ 1.343413] HP CISS Driver (v 3.6.26)
[ 1.343750] Adaptec aacraid driver 1.1-7[28000]-ms
[ 1.343789] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 1.343922] megasas: 00.00.05.34-rc1 Thu. Feb. 24 17:00:00 PDT 2011
[ 1.343963] mpt2sas version 08.100.00.00 loaded
[ 1.344022] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 1.344063] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 1.344103] ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
[ 1.344245] ahci 0000:00:1f.2: version 3.0
[ 1.344255] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.344315] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.344358] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.344383] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.345019] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.346465] scsi0 : ahci
[ 1.347173] scsi1 : ahci
[ 1.347846] scsi2 : ahci
[ 1.348522] scsi3 : ahci
[ 1.349218] ata1: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425100 irq 42
[ 1.349841] ata2: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425180 irq 42
[ 1.350455] ata3: DUMMY
[ 1.351051] ata4: DUMMY
[ 1.351922] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.352524] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.353138] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 1.353729] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.354333] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.354927] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.355029] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 1.598790] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 38:60:77:55:c0:3b
[ 1.599387] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.599999] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.600595] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2
[ 1.601168] Copyright (c) 2007-2011 Intel Corporation.
[ 1.601764] Intel(R) Virtual Function Network Driver - version 1.0.8-k0
[ 1.602343] Copyright (c) 2009 - 2010 Intel Corporation.
[ 1.602935] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.2.9-k2
[ 1.603525] ixgbe: Copyright (c) 1999-2011 Intel Corporation.
[ 1.604127] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 1.604722] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 1.605351] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 1.605933] Copyright (c) 2007 Atheros Corporation.
[ 1.606544] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 1.607193] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.607786] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.608454] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[ 1.609103] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.13 (Jan 31, 2011)
[ 1.609723] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.62.11-0 (2011/01/31)
[ 1.610394] sky2: driver version 1.28
[ 1.611143] PPP generic driver version 2.4.2
[ 1.611859] Fusion MPT base driver 3.04.18
[ 1.612464] Copyright (c) 1999-2008 LSI Corporation
[ 1.613065] Fusion MPT SAS Host driver 3.04.18
[ 1.613751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.614357] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 1.614368] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.614975] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.614978] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.615579] drivers/usb/core/inode.c: creating file 'devices'
[ 1.615581] drivers/usb/core/inode.c: creating file '001'
[ 1.615611] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.616204] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 1.616208] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 1.616217] ehci_hcd 0000:00:1a.0: support lpm
[ 1.616237] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.616821] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.620703] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.620704] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 1.620714] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe427000
[ 1.621291] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.625171] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.630199] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.630825] usb usb1: default language 0x0409
[ 1.630828] usb usb1: udev 1, busnum 1, minor = 0
[ 1.630830] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.631428] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.632026] usb usb1: Product: EHCI Host Controller
[ 1.632624] usb usb1: Manufacturer: Linux 2.6.39.4 ehci_hcd
[ 1.633227] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.633857] usb usb1: usb_probe_device
[ 1.633858] usb usb1: configuration #1 chosen from 1 choice
[ 1.633862] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.633888] hub 1-0:1.0: usb_probe_interface
[ 1.633889] hub 1-0:1.0: usb_probe_interface - got id
[ 1.633891] hub 1-0:1.0: USB hub found
[ 1.634491] hub 1-0:1.0: 2 ports detected
[ 1.635074] hub 1-0:1.0: standalone hub
[ 1.635074] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.635075] hub 1-0:1.0: individual port over-current protection
[ 1.635077] hub 1-0:1.0: power on to power good time: 20ms
[ 1.635079] hub 1-0:1.0: local power source is good
[ 1.635080] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.635092] drivers/usb/core/inode.c: creating file '001'
[ 1.635110] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.635716] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.635719] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.636314] drivers/usb/core/inode.c: creating file '002'
[ 1.636341] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.636941] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 1.636944] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 1.636953] ehci_hcd 0000:00:1d.0: support lpm
[ 1.636965] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.637560] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.641418] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.641419] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 1.641428] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe426000
[ 1.642013] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.645885] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.651130] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.651750] usb usb2: default language 0x0409
[ 1.651753] usb usb2: udev 1, busnum 2, minor = 128
[ 1.651754] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.652347] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.652930] usb usb2: Product: EHCI Host Controller
[ 1.653511] usb usb2: Manufacturer: Linux 2.6.39.4 ehci_hcd
[ 1.654085] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.654689] usb usb2: usb_probe_device
[ 1.654690] usb usb2: configuration #1 chosen from 1 choice
[ 1.654693] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.654718] hub 2-0:1.0: usb_probe_interface
[ 1.654719] hub 2-0:1.0: usb_probe_interface - got id
[ 1.654720] hub 2-0:1.0: USB hub found
[ 1.655120] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.655136] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.656393] hub 2-0:1.0: 2 ports detected
[ 1.656572] ata1.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
[ 1.656573] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.656617] ata2.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
[ 1.656618] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.658220] ata2.00: configured for UDMA/133
[ 1.659086] ata1.00: configured for UDMA/133
[ 1.659157] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
[ 1.659260] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.659280] sd 0:0:0:0: [sda] Write Protect is off
[ 1.659282] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.659290] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.659314] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.659394] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
[ 1.659510] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.659544] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.659549] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.659550] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.659564] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.664132] sda: sda1 sda2 sda3
[ 1.666465] hub 2-0:1.0: standalone hub
[ 1.666466] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.666467] hub 2-0:1.0: individual port over-current protection
[ 1.666468] hub 2-0:1.0: power on to power good time: 20ms
[ 1.666470] hub 2-0:1.0: local power source is good
[ 1.666471] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.666483] drivers/usb/core/inode.c: creating file '001'
[ 1.666518] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.666627] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.667703] sdb: unknown partition table
[ 1.667704] ohci_hcd: block sizes: ed 80 td 96
[ 1.667732] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.667780] usbcore: registered new interface driver usblp
[ 1.667781] Initializing USB Mass Storage driver...
[ 1.667804] usbcore: registered new interface driver usb-storage
[ 1.667805] USB Mass Storage support registered.
[ 1.667827] usbcore: registered new interface driver libusual
[ 1.667916] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.670987] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.670990] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.671085] mousedev: PS/2 mouse device common for all mice
[ 1.671154] rtc_cmos 00:06: RTC can wake from S4
[ 1.671245] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.671273] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.671305] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.671362] md: linear personality registered for level -1
[ 1.671363] md: raid0 personality registered for level 0
[ 1.671364] md: raid1 personality registered for level 1
[ 1.671365] md: raid10 personality registered for level 10
[ 1.671366] md: raid6 personality registered for level 6
[ 1.671367] md: raid5 personality registered for level 5
[ 1.671368] md: raid4 personality registered for level 4
[ 1.671369] md: multipath personality registered for level -4
[ 1.671370] md: faulty personality registered for level -5
[ 1.671483] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.671513] device-mapper: multipath: version 1.3.0 loaded
[ 1.671514] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.671515] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 1.671517] device-mapper: multipath service-time: version 0.2.0 loaded
[ 1.671851] cpuidle: using governor ladder
[ 1.685599] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.686098] cpuidle: using governor menu
[ 1.687383] usbcore: registered new interface driver usbhid
[ 1.687945] usbhid: USB HID core driver
[ 1.688520] Netfilter messages via NETLINK v0.30.
[ 1.689158] IPv4 over IPv4 tunneling driver
[ 1.689903] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.690465] TCP cubic registered
[ 1.691008] NET: Registered protocol family 17
[ 1.691540] 802.1Q VLAN Support v1.8 Ben Greear
[ 1.692077] All bugs added by David S. Miller
[ 1.693090] rtc_cmos 00:06: setting system clock to 2012-01-10 11:19:57 UTC (1326194397)
[ 1.718016] md: Waiting for all devices to be available before autodetect
[ 1.718561] md: If you don't use raid, use raid=noautodetect
[ 1.719364] md: Autodetecting RAID arrays.
[ 1.719905] md: Scanned 0 and added 0 devices.
[ 1.720435] md: autorun ...
[ 1.720960] md: ... autorun DONE.
[ 1.733896] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.733903] hub 1-0:1.0: port 1: status 0501 change 0001
[ 1.748886] EXT3-fs: barriers not enabled
[ 1.756328] kjournald starting. Commit interval 5 seconds
[ 1.756400] EXT3-fs (sda3): mounted filesystem with writeback data mode
[ 1.756408] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 1.757976] Freeing unused kernel memory: 556k freed
[ 1.765794] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.765801] hub 2-0:1.0: port 1: status 0501 change 0001
[ 1.787703] Refined TSC clocksource calibration: 3292.520 MHz.
[ 1.788257] Switching to clocksource tsc
[ 1.833633] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 1.833639] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.884603] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 1.884606] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.935241] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.986272] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 1.986275] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.048976] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
[ 2.048983] ehci_hcd 0000:00:1a.0: LPM: no device attached
[ 2.049201] usb 1-1: udev 2, busnum 1, minor = 1
[ 2.049204] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.049772] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.050427] usb 1-1: usb_probe_device
[ 2.050428] usb 1-1: configuration #1 chosen from 1 choice
[ 2.050572] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 2.050704] hub 1-1:1.0: usb_probe_interface
[ 2.050705] hub 1-1:1.0: usb_probe_interface - got id
[ 2.050706] hub 1-1:1.0: USB hub found
[ 2.051317] hub 1-1:1.0: 4 ports detected
[ 2.051887] hub 1-1:1.0: standalone hub
[ 2.051888] hub 1-1:1.0: individual port power switching
[ 2.051889] hub 1-1:1.0: individual port over-current protection
[ 2.051890] hub 1-1:1.0: Single TT
[ 2.051891] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.051892] hub 1-1:1.0: power on to power good time: 100ms
[ 2.052063] hub 1-1:1.0: local power source is good
[ 2.052065] hub 1-1:1.0: enabling power on all ports
[ 2.052572] drivers/usb/core/inode.c: creating file '002'
[ 2.052586] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 2.052593] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 2.102893] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 2.102896] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.151739] hub 1-1:1.0: port 2: status 0101 change 0001
[ 2.153518] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.204560] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 2.204563] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.251203] usb 1-1: link qh256-0001/ffff880215e05d00 start 1 [1/0 us]
[ 2.268262] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
[ 2.268269] ehci_hcd 0000:00:1d.0: LPM: no device attached
[ 2.268486] usb 2-1: udev 2, busnum 2, minor = 129
[ 2.268489] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.269099] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.269782] usb 2-1: usb_probe_device
[ 2.269784] usb 2-1: configuration #1 chosen from 1 choice
[ 2.269857] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 2.269945] hub 2-1:1.0: usb_probe_interface
[ 2.269946] hub 2-1:1.0: usb_probe_interface - got id
[ 2.269948] hub 2-1:1.0: USB hub found
[ 2.270602] hub 2-1:1.0: 6 ports detected
[ 2.271195] hub 2-1:1.0: standalone hub
[ 2.271196] hub 2-1:1.0: individual port power switching
[ 2.271197] hub 2-1:1.0: individual port over-current protection
[ 2.271198] hub 2-1:1.0: Single TT
[ 2.271199] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.271200] hub 2-1:1.0: power on to power good time: 100ms
[ 2.271473] hub 2-1:1.0: local power source is good
[ 2.271476] hub 2-1:1.0: enabling power on all ports
[ 2.272231] drivers/usb/core/inode.c: creating file '002'
[ 2.272248] hub 1-1:1.0: state 7 ports 4 chg 0004 evt 0000
[ 2.272351] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 2.283233] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
[ 2.345995] usb 1-1.2: new low speed USB device number 3 using ehci_hcd
[ 2.357987] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
[ 2.372521] usb 2-1: link qh256-0001/ffff880215e05c80 start 1 [1/0 us]
[ 2.435764] usb 1-1.2: skipped 1 descriptor after interface
[ 2.435769] usb 1-1.2: skipped 1 descriptor after interface
[ 2.435773] usb 1-1.2: udev 3, busnum 1, minor = 2
[ 2.435776] usb 1-1.2: New USB device found, idVendor=3333, idProduct=3333
[ 2.436385] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.437017] usb 1-1.2: usb_probe_device
[ 2.437018] usb 1-1.2: configuration #1 chosen from 1 choice
[ 2.437442] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[ 2.437477] usbhid 1-1.2:1.0: usb_probe_interface
[ 2.437479] usbhid 1-1.2:1.0: usb_probe_interface - got id
[ 2.439969] input: HID 3333:3333 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[ 2.440619] usb 1-1.2: link qh8-0e01/ffff880215e05900 start 2 [1/2 us]
[ 2.440623] generic-usb 0003:3333:3333.0001: input: USB HID v1.10 Keyboard [HID 3333:3333] on usb-0000:00:1a.0-1.2/input0
[ 2.441266] usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1)
[ 2.441285] usbhid 1-1.2:1.1: usb_probe_interface
[ 2.441286] usbhid 1-1.2:1.1: usb_probe_interface - got id
[ 2.444303] input: HID 3333:3333 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input3
[ 2.444970] generic-usb 0003:3333:3333.0002: input: USB HID v1.10 Mouse [HID 3333:3333] on usb-0000:00:1a.0-1.2/input1
[ 2.445639] drivers/usb/core/inode.c: creating file '003'
[ 2.445647] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 001e
[ 2.445788] hub 2-1:1.0: over-current change on port 1
[ 2.546222] hub 2-1:1.0: enabling power on all ports
[ 2.647052] hub 2-1:1.0: over-current condition on port 1
[ 2.647885] hub 2-1:1.0: over-current change on port 2
[ 2.748556] hub 2-1:1.0: enabling power on all ports
[ 2.850349] hub 2-1:1.0: over-current condition on port 2
[ 2.851217] hub 2-1:1.0: over-current change on port 3
[ 2.951909] hub 2-1:1.0: enabling power on all ports
[ 3.052690] hub 2-1:1.0: over-current condition on port 3
[ 3.053554] hub 2-1:1.0: over-current change on port 4
[ 3.154240] hub 2-1:1.0: enabling power on all ports
[ 3.255031] hub 2-1:1.0: over-current condition on port 4
[ 3.255758] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0004
[ 3.255970] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0000
[ 3.622766] Adding 2104508k swap on /dev/sda2. Priority:-1 extents:1 across:2104508k
[ 3.743885] EXT3-fs (sda3): using internal journal
[ 5.237587] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 5.288389] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 6.167061] sshd (1767): /proc/1767/oom_adj is deprecated, please use /proc/1767/oom_score_adj instead.
[ 8.910653] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 8263.909565] [drm:pch_irq_handler] *ERROR* PCH poison interrupt
[ 8273.935944] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0004
[ 8273.936185] hub 1-1:1.0: port 2, status 0100, change 0001, 12 Mb/s
[ 8273.936189] usb 1-1.2: USB disconnect, device number 3
[ 8273.936593] usb 1-1.2: unregistering device
[ 8273.936595] usb 1-1.2: unregistering interface 1-1.2:1.0
[ 8273.936612] usb 1-1.2: unlink qh8-0e01/ffff880215e05900 start 2 [1/2 us]
[ 8273.936617] ehci_hcd 0000:00:1a.0: shutdown urb ffff880216f9f540 ep1in-intr
[ 8273.941434] usb 1-1.2: unregistering interface 1-1.2:1.1
[ 8273.949394] usb 1-1.2: usb_disable_device nuking all URBs
[ 8274.053223] hub 1-1:1.0: debounce: port 2: total 100ms stable 100ms status 0x100