dmesg - K7VMA
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-14-generic (buildd@palmer) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:34:47 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002dff0000 (usable)
[ 0.000000] BIOS-e820: 000000002dff0000 - 000000002dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002dff3000 - 000000002e000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.2 present.
[ 0.000000] DMI: VIA Technologies, Inc. VT8365/8365-686B, BIOS 6.00 PG 06/08/2001
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x2dff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-AFFFF uncachable
[ 0.000000] B0000-BFFFF write-combining
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 02E000000 mask FFE000000 uncachable
[ 0.000000] 2 base 030000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0D8000000 mask FFC000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000002dff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 002dc00000 page 2M
[ 0.000000] 002dc00000 - 002dff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 2dff0000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 2c5f9000 - 2d88d000
[ 0.000000] ACPI: RSDP 000f7de0 00014 (v00 VT8365)
[ 0.000000] ACPI: RSDT 2dff3000 00028 (v01 VT8365 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 2dff3040 00074 (v01 VT8365 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 2dff30c0 02759 (v01 VT8365 AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 2dff0000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 735MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2dff0000
[ 0.000000] low ram: 0 - 2dff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002dff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0002dff0
[ 0.000000] On node 0 totalpages: 188288
[ 0.000000] free_area_init_node: node 0, pgdat c17b3400, node_mem_map eda2f200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1440 pages used for memmap
[ 0.000000] Normal zone: 182864 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 2e000000 (gap: 2e000000:d1ff0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ec000000 s26240 r0 d22912 u4194304
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186816
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 3014144 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 714872k/753600k available (5335k kernel code, 38280k reserved, 2592k data, 696k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xee7f0000 - 0xff7fe000 ( 272 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xedff0000 ( 735 MB)
[ 0.000000] .init : 0xc17bf000 - 0xc186d000 ( 696 kB)
[ 0.000000] .data : 0xc1535d84 - 0xc17be080 (2592 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1535d84 (5335 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=ebc06000 soft=ebc08000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1001.873 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2003.74 BogoMIPS (lpj=4007492)
[ 0.004022] pid_max: default: 32768 minimum: 301
[ 0.004106] Security Framework initialized
[ 0.004191] AppArmor: AppArmor initialized
[ 0.004197] Yama: becoming mindful.
[ 0.004380] Mount-cache hash table entries: 512
[ 0.004819] Initializing cgroup subsys cpuacct
[ 0.004838] Initializing cgroup subsys memory
[ 0.004868] Initializing cgroup subsys devices
[ 0.004876] Initializing cgroup subsys freezer
[ 0.004883] Initializing cgroup subsys net_cls
[ 0.004891] Initializing cgroup subsys blkio
[ 0.004913] Initializing cgroup subsys perf_event
[ 0.005000] mce: CPU supports 4 MCE banks
[ 0.005131] SMP alternatives: switching to UP code
[ 0.022336] Freeing SMP alternatives: 24k freed
[ 0.022462] ACPI: Core revision 20110413
[ 0.022877] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x0094 (20110413/psloop-526)
[ 0.022902] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x0099 (20110413/psloop-526)
[ 0.027333] ACPI: setting ELCR to 0020 (from 1c20)
[ 0.028257] ftrace: allocating 24878 entries in 49 pages
[ 0.036387] weird, boot CPU (#0) not listed by the BIOS.
[ 0.036400] SMP motherboard not detected.
[ 0.036406] Local APIC not detected. Using dummy APIC emulation.
[ 0.036411] SMP disabled
[ 0.036418] Performance Events:
[ 0.036426] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.036431] no hardware sampling interrupt available.
[ 0.036443] AMD PMU driver.
[ 0.036455] ... version: 0
[ 0.036459] ... bit width: 48
[ 0.036463] ... generic registers: 4
[ 0.036467] ... value mask: 0000ffffffffffff
[ 0.036472] ... max period: 00007fffffffffff
[ 0.036476] ... fixed-purpose events: 0
[ 0.036481] ... event mask: 000000000000000f
[ 0.038183] Brought up 1 CPUs
[ 0.038191] Total of 1 processors activated (2003.74 BogoMIPS).
[ 0.040197] devtmpfs: initialized
[ 0.040724] PM: Registering ACPI NVS region at 2dff0000 (12288 bytes)
[ 0.046183] print_constraints: dummy:
[ 0.046241] Time: 11:07:33 Date: 01/08/12
[ 0.046386] NET: Registered protocol family 16
[ 0.046803] EISA bus registered
[ 0.046841] ACPI: bus type pci registered
[ 0.079373] PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1
[ 0.079380] PCI: Using configuration type 1 for base access
[ 0.082462] bio: create slab at 0
[ 0.083774] ACPI: EC: Look up EC in DSDT
[ 0.089043] ACPI: Interpreter enabled
[ 0.089057] ACPI: (supports S0 S1 S4 S5)
[ 0.089110] ACPI: Using PIC for interrupt routing
[ 0.096314] ACPI: No dock devices found.
[ 0.096320] HEST: Table not found.
[ 0.096333] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.096502] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.096848] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.096856] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x3fff] (ignored)
[ 0.096864] pci_root PNP0A03:00: host bridge window [io 0x4100-0x4fff] (ignored)
[ 0.096871] pci_root PNP0A03:00: host bridge window [io 0x5010-0x5fff] (ignored)
[ 0.096878] pci_root PNP0A03:00: host bridge window [io 0x6080-0xffff] (ignored)
[ 0.096885] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.096892] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.096899] pci_root PNP0A03:00: host bridge window [mem 0x2e000000-0xffefffff] (ignored)
[ 0.096938] pci 0000:00:00.0: [1106:0305] type 0 class 0x000600
[ 0.096958] pci 0000:00:00.0: reg 10: [mem 0xd8000000-0xdbffffff pref]
[ 0.097041] pci 0000:00:01.0: [1106:8305] type 1 class 0x000604
[ 0.097086] pci 0000:00:01.0: supports D1
[ 0.097121] pci 0000:00:07.0: [1106:0686] type 0 class 0x000601
[ 0.097225] pci 0000:00:07.1: [1106:0571] type 0 class 0x000101
[ 0.097273] pci 0000:00:07.1: reg 20: [io 0xd000-0xd00f]
[ 0.097341] pci 0000:00:07.2: [1106:3038] type 0 class 0x000c03
[ 0.097388] pci 0000:00:07.2: reg 20: [io 0xd400-0xd41f]
[ 0.097447] pci 0000:00:07.3: [1106:3038] type 0 class 0x000c03
[ 0.097494] pci 0000:00:07.3: reg 20: [io 0xd800-0xd81f]
[ 0.097553] pci 0000:00:07.4: [1106:3057] type 0 class 0x000680
[ 0.097627] pci 0000:00:07.4: quirk: [io 0x6000-0x607f] claimed by vt82c686 HW-mon
[ 0.097636] pci 0000:00:07.4: quirk: [io 0x5000-0x500f] claimed by vt82c686 SMB
[ 0.097681] pci 0000:00:07.5: [1106:3058] type 0 class 0x000401
[ 0.097701] pci 0000:00:07.5: reg 10: [io 0xdc00-0xdcff]
[ 0.097715] pci 0000:00:07.5: reg 14: [io 0xe000-0xe003]
[ 0.097728] pci 0000:00:07.5: reg 18: [io 0xe400-0xe403]
[ 0.097804] pci 0000:00:07.6: [1106:3068] type 0 class 0x000780
[ 0.097824] pci 0000:00:07.6: reg 10: [io 0xe800-0xe8ff]
[ 0.097914] pci 0000:00:09.0: [1045:c861] type 0 class 0x000c03
[ 0.097931] pci 0000:00:09.0: reg 10: [mem 0xde008000-0xde008fff]
[ 0.098007] pci 0000:00:0c.0: [1814:0401] type 0 class 0x000280
[ 0.098027] pci 0000:00:0c.0: reg 10: [mem 0xde000000-0xde007fff]
[ 0.098165] pci 0000:01:00.0: [5333:8a26] type 0 class 0x000300
[ 0.098188] pci 0000:01:00.0: reg 10: [mem 0xdd000000-0xdd07ffff]
[ 0.098201] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff pref]
[ 0.098241] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.098265] pci 0000:01:00.0: supports D1 D2
[ 0.098309] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.098319] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.098328] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xddffffff]
[ 0.098337] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff pref]
[ 0.098349] pci_bus 0000:00: on NUMA node 0
[ 0.098359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.098687] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.123698] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.123893] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.124160] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[ 0.124406] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.124763] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.124771] vgaarb: loaded
[ 0.124775] vgaarb: bridge control possible 0000:01:00.0
[ 0.125570] SCSI subsystem initialized
[ 0.125864] libata version 3.00 loaded.
[ 0.126027] usbcore: registered new interface driver usbfs
[ 0.126064] usbcore: registered new interface driver hub
[ 0.126159] usbcore: registered new device driver usb
[ 0.126439] PCI: Using ACPI for IRQ routing
[ 0.126453] PCI: pci_cache_line_size set to 32 bytes
[ 0.126535] reserve RAM buffer: 000000002dff0000 - 000000002fffffff
[ 0.126910] NetLabel: Initializing
[ 0.126916] NetLabel: domain hash size = 128
[ 0.126920] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.126965] NetLabel: unlabeled traffic allowed by default
[ 0.127135] Switching to clocksource pit
[ 0.151195] AppArmor: AppArmor Filesystem Enabled
[ 0.151364] pnp: PnP ACPI init
[ 0.151433] ACPI: bus type pnp registered
[ 0.151969] pnp 00:00: [mem 0x000f0000-0x000f3fff]
[ 0.151978] pnp 00:00: [mem 0x000f4000-0x000f7fff]
[ 0.151984] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[ 0.151990] pnp 00:00: [mem 0x000fc000-0x000fffff]
[ 0.151996] pnp 00:00: [mem 0x2dff0000-0x2dffffff]
[ 0.152003] pnp 00:00: [mem 0xffff0000-0xffffffff]
[ 0.152008] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.152014] pnp 00:00: [mem 0x00100000-0x2dfeffff]
[ 0.152020] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[ 0.152186] system 00:00: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.152195] system 00:00: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.152203] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.152211] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.152219] system 00:00: [mem 0x2dff0000-0x2dffffff] could not be reserved
[ 0.152227] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.152235] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.152243] system 00:00: [mem 0x00100000-0x2dfeffff] could not be reserved
[ 0.152250] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.152263] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.152441] pnp 00:01: [bus 00-ff]
[ 0.152449] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.152456] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.152462] pnp 00:01: [io 0x0d00-0x3fff window]
[ 0.152468] pnp 00:01: [io 0x4000-0x407f]
[ 0.152473] pnp 00:01: [io 0x4080-0x40ff]
[ 0.152479] pnp 00:01: [io 0x4100-0x4fff window]
[ 0.152485] pnp 00:01: [io 0x5000-0x500f]
[ 0.152490] pnp 00:01: [io 0x5010-0x5fff window]
[ 0.152496] pnp 00:01: [io 0x6000-0x607f]
[ 0.152502] pnp 00:01: [io 0x6080-0xffff window]
[ 0.152508] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.152515] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[ 0.152521] pnp 00:01: [mem 0x2e000000-0xffefffff window]
[ 0.152619] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.152963] pnp 00:02: [io 0x0010-0x001f]
[ 0.152970] pnp 00:02: [io 0x0022-0x003f]
[ 0.152976] pnp 00:02: [io 0x0044-0x005f]
[ 0.152981] pnp 00:02: [io 0x0062-0x0063]
[ 0.152987] pnp 00:02: [io 0x0065-0x006f]
[ 0.152992] pnp 00:02: [io 0x0074-0x007f]
[ 0.152997] pnp 00:02: [io 0x0091-0x0093]
[ 0.153003] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.153008] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.153014] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.153116] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.153126] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.153164] pnp 00:03: [dma 4]
[ 0.153187] pnp 00:03: [io 0x0000-0x000f]
[ 0.153193] pnp 00:03: [io 0x0080-0x0090]
[ 0.153198] pnp 00:03: [io 0x0094-0x009f]
[ 0.153204] pnp 00:03: [io 0x00c0-0x00df]
[ 0.153288] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.153323] pnp 00:04: [io 0x0070-0x0073]
[ 0.153335] pnp 00:04: [irq 8]
[ 0.153422] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.153449] pnp 00:05: [io 0x0061]
[ 0.153516] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.153544] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.153550] pnp 00:06: [irq 13]
[ 0.153617] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.153932] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.153939] pnp 00:07: [io 0x03f7]
[ 0.153946] pnp 00:07: [irq 6]
[ 0.153951] pnp 00:07: [dma 2]
[ 0.154052] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.154612] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.154620] pnp 00:08: [irq 4]
[ 0.154754] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.155524] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.155532] pnp 00:09: [irq 3]
[ 0.155655] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active)
[ 0.156609] pnp 00:0a: [io 0x0378-0x037f]
[ 0.156616] pnp 00:0a: [io 0x0778-0x077b]
[ 0.156623] pnp 00:0a: [irq 7]
[ 0.156628] pnp 00:0a: [dma 3]
[ 0.156758] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.156898] pnp: PnP ACPI: found 11 devices
[ 0.156904] ACPI: ACPI bus type pnp unregistered
[ 0.156916] PnPBIOS: Disabled by ACPI PNP
[ 0.196500] Switching to clocksource acpi_pm
[ 0.196577] PCI: max bus depth: 1 pci_try_num: 2
[ 0.196641] pci 0000:01:00.0: BAR 6: assigned [mem 0xdc000000-0xdc00ffff pref]
[ 0.196652] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.196658] pci 0000:00:01.0: bridge window [io disabled]
[ 0.196669] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xddffffff]
[ 0.196678] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd7ffffff pref]
[ 0.196708] pci 0000:00:01.0: setting latency timer to 64
[ 0.196718] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.196725] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.196733] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xddffffff]
[ 0.196740] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff pref]
[ 0.196885] Switched to NOHz mode on CPU #0
[ 0.196994] NET: Registered protocol family 2
[ 0.197202] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.198448] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.204221] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.207151] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.207160] TCP reno registered
[ 0.207177] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.207254] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.207717] NET: Registered protocol family 1
[ 0.207779] pci 0000:00:00.0: Applying VIA southbridge workaround
[ 0.207791] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.207804] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 0.207936] pci 0000:01:00.0: Boot video device
[ 0.207943] PCI: CLS 32 bytes, default 32
[ 0.209338] audit: initializing netlink socket (disabled)
[ 0.209373] type=2000 audit(1326020852.204:1): initialized
[ 0.263331] Trying to unpack rootfs image as initramfs...
[ 0.340303] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.381154] VFS: Disk quotas dquot_6.5.2
[ 0.381350] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.383565] fuse init (API version 7.16)
[ 0.383840] msgmni has been set to 1396
[ 0.397392] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.397495] io scheduler noop registered
[ 0.397501] io scheduler deadline registered
[ 0.397542] io scheduler cfq registered (default)
[ 0.397982] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.398074] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.398493] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.398514] ACPI: Power Button [PWRB]
[ 0.398642] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.398654] ACPI: Sleep Button [SLPB]
[ 0.398786] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.398794] ACPI: Power Button [PWRF]
[ 0.398926] ACPI: Fan [FAN] (on)
[ 0.398949] ACPI: acpi_idle registered with cpuidle
[ 0.399049] Marking TSC unstable due to TSC halts in idle
[ 0.402699] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.402707] ACPI: Thermal Zone [THRM] (32 C)
[ 0.402769] ERST: Table is not found!
[ 0.408344] isapnp: Scanning for PnP cards...
[ 0.435005] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.565676] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.608331] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.677694] Linux agpgart interface v0.103
[ 0.677911] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[ 0.693337] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xd8000000
[ 0.701586] brd: module loaded
[ 0.703412] loop: module loaded
[ 0.710161] Fixed MDIO Bus: probed
[ 0.710247] PPP generic driver version 2.4.2
[ 0.710505] tun: Universal TUN/TAP device driver, 1.6
[ 0.710512] tun: (C) 1999-2004 Max Krasnyansky
[ 0.710818] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.710876] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.711725] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.711735] PCI: setting IRQ 10 as level-triggered
[ 0.711749] ohci_hcd 0000:00:09.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 0.711806] ohci_hcd 0000:00:09.0: OHCI Host Controller
[ 0.711934] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 1
[ 0.712108] ohci_hcd 0000:00:09.0: irq 10, io mem 0xde008000
[ 0.770729] hub 1-0:1.0: USB hub found
[ 0.770755] hub 1-0:1.0: 2 ports detected
[ 0.770964] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.772073] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.772083] PCI: setting IRQ 11 as level-triggered
[ 0.772097] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.776419] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 0.776755] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
[ 0.776845] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000d400
[ 0.777321] hub 2-0:1.0: USB hub found
[ 0.777339] hub 2-0:1.0: 2 ports detected
[ 0.777554] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.777577] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 0.777676] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
[ 0.777713] uhci_hcd 0000:00:07.3: irq 11, io base 0x0000d800
[ 0.778068] hub 3-0:1.0: USB hub found
[ 0.778080] hub 3-0:1.0: 2 ports detected
[ 0.778394] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.035842] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.044942] mousedev: PS/2 mouse device common for all mice
[ 1.045762] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.045811] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 1.046192] device-mapper: uevent: version 1.0.3
[ 1.046443] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.046550] EISA: Probing bus 0 at eisa.0
[ 1.046590] Cannot allocate resource for EISA slot 4
[ 1.046597] Cannot allocate resource for EISA slot 5
[ 1.046602] Cannot allocate resource for EISA slot 6
[ 1.046619] EISA: Detected 0 cards.
[ 1.046655] cpufreq-nforce2: No nForce2 chipset.
[ 1.046742] cpuidle: using governor ladder
[ 1.046864] cpuidle: using governor menu
[ 1.046870] EFI Variables Facility v0.08 2004-May-17
[ 1.047549] TCP cubic registered
[ 1.052934] NET: Registered protocol family 10
[ 1.054611] NET: Registered protocol family 17
[ 1.054716] Registering the dns_resolver key type
[ 1.054800] Using IPI No-Shortcut mode
[ 1.055217] PM: Hibernation image not present or could not be loaded.
[ 1.055279] registered taskstats version 1
[ 1.132149] isapnp: No Plug & Play device found
[ 1.132253] usb 2-1: new full speed USB device number 2 using uhci_hcd
[ 1.351484] hub 2-1:1.0: USB hub found
[ 1.353423] hub 2-1:1.0: 3 ports detected
[ 1.468236] usb 2-2: new full speed USB device number 3 using uhci_hcd
[ 1.622060] hub 2-2:1.0: USB hub found
[ 1.624662] hub 2-2:1.0: 4 ports detected
[ 1.705889] usb 2-1.1: new low speed USB device number 4 using uhci_hcd
[ 1.926842] usb 2-1.3: new full speed USB device number 5 using uhci_hcd
[ 2.016609] Freeing initrd memory: 19024k freed
[ 2.131639] Magic number: 12:797:124
[ 2.131926] rtc_cmos 00:04: setting system clock to 2012-01-08 11:07:35 UTC (1326020855)
[ 2.131937] powernow-k8: Processor cpuid 642 not supported
[ 2.131997] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.132002] EDD information not available.
[ 2.132555] Freeing unused kernel memory: 696k freed
[ 2.135828] Write protecting the kernel text: 5336k
[ 2.135925] Write protecting the kernel read-only data: 2192k
[ 2.221260] udevd[79]: starting version 173
[ 2.397795] usb 2-1.2: new full speed USB device number 6 using uhci_hcd
[ 2.522089] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 2.522102] usb 2-1.2: no configuration chosen from 1 choice
[ 2.631622] Floppy drive(s): fd0 is 1.44M
[ 2.648150] FDC 0 is a post-1991 82077
[ 2.723242] pata_via 0000:00:07.1: version 0.3.4
[ 2.752607] scsi0 : pata_via
[ 2.757061] scsi1 : pata_via
[ 2.757321] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 2.757330] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 2.892862] usb 2-1.2: USB disconnect, device number 6
[ 2.893946] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input3
[ 2.894289] generic-usb 0003:05AC:0307.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[ 2.900475] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input4
[ 2.900856] generic-usb 0003:05AC:020C.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[ 2.917937] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input5
[ 2.918260] generic-usb 0003:05AC:020C.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[ 2.918327] usbcore: registered new interface driver usbhid
[ 2.918333] usbhid: USB HID core driver
[ 2.928803] ata1.00: ATA-6: SAMSUNG SV4002H, QP100-09, max UDMA/100
[ 2.928816] ata1.00: 78242976 sectors, multi 16: LBA
[ 2.928835] ata1.01: ATAPI: MATSHITADVD-ROM SR-8585, 1Z21, max UDMA/33
[ 2.936832] ata1.00: configured for UDMA/100
[ 2.944578] ata1.01: configured for UDMA/33
[ 2.945287] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SV4002H QP10 PQ: 0 ANSI: 5
[ 2.945903] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.947300] scsi 0:0:1:0: CD-ROM MATSHITA DVD-ROM SR-8585 1Z21 PQ: 0 ANSI: 5
[ 2.948598] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 2.948613] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.949057] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 2.949599] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 2.951933] sd 0:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
[ 2.952214] sd 0:0:0:0: [sda] Write Protect is off
[ 2.952224] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.952294] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.987054] sda: sda1 sda2 < sda5 >
[ 2.988347] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.733512] usb 2-1.2: new full speed USB device number 7 using uhci_hcd
[ 3.858926] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 3.858938] usb 2-1.2: no configuration chosen from 1 choice
[ 4.753677] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 4.753689] vesafb: scrolling: redraw
[ 4.753698] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 4.754292] vesafb: framebuffer at 0xd0000000, mapped to 0xee900000, using 1216k, total 1216k
[ 4.754678] fbcon: VESA VGA (fb0) is primary device
[ 4.754848] Console: switching to colour frame buffer device 80x30
[ 4.754893] fb0: VESA VGA frame buffer device
[ 5.241577] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.182529] udevd[319]: starting version 173
[ 9.789520] lp: driver loaded but no devices found
[ 9.792684] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.881515] parport_pc: VIA 686A/8231 detected
[ 10.881527] parport_pc: probing current configuration
[ 10.881549] parport_pc: Current parallel port base: 0x378
[ 10.881640] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 10.899550] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.013024] lp0: using parport0 (interrupt-driven).
[ 11.013038] parport_pc: VIA parallel port: io=0x378, irq=7
[ 13.215349] cfg80211: Calling CRDA to update world regulatory domain
[ 13.942150] ppdev: user-space parallel port driver
[ 14.520216] rt61pci 0000:00:0c.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 14.528489] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528503] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528510] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528518] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528524] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528531] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528537] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528544] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528550] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528558] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528563] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528571] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528577] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528584] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528590] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528597] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528603] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528610] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528616] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528624] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528629] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528637] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528643] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528650] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528656] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528663] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 14.528669] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 14.528677] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 15.225318] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.227239] Registered led device: rt61pci-phy0::radio
[ 15.227293] Registered led device: rt61pci-phy0::assoc
[ 15.620408] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620424] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620431] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620439] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620445] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620452] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620458] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620466] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620471] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620479] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620485] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620492] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620499] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620506] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620512] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620519] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620525] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620532] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620538] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620546] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620552] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620559] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620565] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620572] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620578] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620586] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620592] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 15.620599] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 15.620608] cfg80211: World regulatory domain updated:
[ 15.620612] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.620620] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.620627] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.620634] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.620641] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.620648] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.876935] type=1400 audit(1326020869.240:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=598 comm="apparmor_parser"
[ 15.878543] type=1400 audit(1326020869.240:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=694 comm="apparmor_parser"
[ 15.879827] type=1400 audit(1326020869.240:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=694 comm="apparmor_parser"
[ 15.882129] type=1400 audit(1326020869.244:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
[ 15.882887] type=1400 audit(1326020869.244:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
[ 15.885690] type=1400 audit(1326020869.248:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=694 comm="apparmor_parser"
[ 15.985561] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
[ 15.985574] PCI: setting IRQ 12 as level-triggered
[ 15.985591] VIA 82xx Modem 0000:00:07.6: PCI INT C -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
[ 15.988597] VIA 82xx Modem 0000:00:07.6: setting latency timer to 64
[ 16.499108] VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] -> GSI 12 (level, low) -> IRQ 12
[ 16.499288] VIA 82xx Audio 0000:00:07.5: setting latency timer to 64
[ 18.815091] init: failsafe main process (746) killed by TERM signal
[ 21.406492] type=1400 audit(1326020874.768:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=827 comm="apparmor_parser"
[ 21.408262] type=1400 audit(1326020874.772:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=827 comm="apparmor_parser"
[ 22.203102] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.404205] type=1400 audit(1326020875.768:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=882 comm="apparmor_parser"
[ 22.415389] type=1400 audit(1326020875.776:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=900 comm="apparmor_parser"
[ 22.418941] type=1400 audit(1326020875.780:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser"
[ 22.419741] type=1400 audit(1326020875.780:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser"
[ 22.751032] type=1400 audit(1326020876.112:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=901 comm="apparmor_parser"
[ 22.776559] type=1400 audit(1326020876.140:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=901 comm="apparmor_parser"
[ 22.795059] type=1400 audit(1326020876.156:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=901 comm="apparmor_parser"
[ 24.074140] type=1400 audit(1326020877.436:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=904 comm="apparmor_parser"
[ 25.886630] init: apport pre-start process (954) terminated with status 1
[ 26.067093] init: apport post-stop process (990) terminated with status 1
[ 27.405383] wlan0: authenticate with 00:26:44:f7:30:e7 (try 1)
[ 27.406899] wlan0: authenticated
[ 27.409857] wlan0: associate with 00:26:44:f7:30:e7 (try 1)
[ 27.413664] wlan0: RX AssocResp from 00:26:44:f7:30:e7 (capab=0x411 status=0 aid=3)
[ 27.413674] wlan0: associated
[ 27.418333] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.446705] Adding 751612k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:751612k
[ 30.826894] Bluetooth: Core ver 2.16
[ 30.827055] NET: Registered protocol family 31
[ 30.827061] Bluetooth: HCI device and connection manager initialized
[ 30.827070] Bluetooth: HCI socket layer initialized
[ 30.827075] Bluetooth: L2CAP socket layer initialized
[ 30.832684] Bluetooth: SCO socket layer initialized
[ 30.942315] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.942326] Bluetooth: BNEP filters: protocol multicast
[ 30.952114] Bluetooth: RFCOMM TTY layer initialized
[ 30.952141] Bluetooth: RFCOMM socket layer initialized
[ 30.952147] Bluetooth: RFCOMM ver 1.11
[ 31.901981] [drm] Initialized drm 1.1.0 20060810
[ 31.957571] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
[ 31.958173] [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0
[ 31.961414] mtrr: base(0xd2000000) is not aligned on a size(0x5000000) boundary
[ 34.622636] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 35.982186] init: plymouth-stop pre-start process (1285) terminated with status 1
[ 38.232047] wlan0: no IPv6 routers present
[ 44.144668] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 156.083082] usb 2-1.2: USB disconnect, device number 7
[ 156.928178] usb 2-1.2: new full speed USB device number 8 using uhci_hcd
[ 157.013952] usb 2-1.2: device descriptor read/64, error -71
[ 157.561189] usbcore: registered new interface driver uas
[ 157.651223] Initializing USB Mass Storage driver...
[ 157.656297] scsi2 : usb-storage 2-1.2:1.0
[ 157.659525] usbcore: registered new interface driver usb-storage
[ 157.659541] USB Mass Storage support registered.
[ 158.741743] usb 2-1.2: reset full speed USB device number 8 using uhci_hcd
[ 158.855844] scsi 2:0:0:0: Direct-Access DISNEY MIX STICK 0100 PQ: 0 ANSI: 4
[ 158.856782] scsi: killing requests for dead queue
[ 158.856950] scsi: killing requests for dead queue
[ 158.857067] scsi: killing requests for dead queue
[ 158.857173] scsi: killing requests for dead queue
[ 158.857277] scsi: killing requests for dead queue
[ 158.857411] scsi: killing requests for dead queue
[ 158.857517] scsi: killing requests for dead queue
[ 158.857646] scsi: killing requests for dead queue
[ 158.864009] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 158.867713] sd 2:0:0:0: [sdb] 248320 512-byte logical blocks: (127 MB/121 MiB)
[ 158.870703] sd 2:0:0:0: [sdb] Write Protect is off
[ 158.870723] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 158.873958] sd 2:0:0:0: [sdb] No Caching mode page present
[ 158.873980] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 158.891712] sd 2:0:0:0: [sdb] No Caching mode page present
[ 158.891737] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 158.900101] sdb: sdb1
[ 158.913706] sd 2:0:0:0: [sdb] No Caching mode page present
[ 158.913728] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 158.913742] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 189.022689] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 189.281575] usb 2-1.2: reset full speed USB device number 8 using uhci_hcd
[ 189.369516] usb 2-1.2: device descriptor read/64, error -71
[ 189.557513] usb 2-1.2: device descriptor read/64, error -71
[ 189.733484] usb 2-1.2: reset full speed USB device number 8 using uhci_hcd
[ 195.077600] usb 2-1.2: reset full speed USB device number 8 using uhci_hcd
[ 195.564251] usb 2-1.2: device not accepting address 8, error -71
[ 195.637486] usb 2-1.2: reset full speed USB device number 8 using uhci_hcd
[ 243.077580] usb 2-1.2: reset full speed USB device number 8 using uhci_hcd
[ 243.161593] usb 2-1.2: device descriptor read/64, error -71
[ 243.349617] usb 2-1.2: device descriptor read/64, error -71
[ 243.526229] usb 2-1.2: reset full speed USB device number 8 using uhci_hcd
[ 243.709470] usb 2-1.2: reset full speed USB device number 8 using uhci_hcd
[ 245.077515] usb 2-1.2: reset full speed USB device number 8 using uhci_hcd
[ 245.162259] usb 2-1.2: device descriptor read/64, error -71
[ 245.424243] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 245.424265] usb 2-1: USB disconnect, device number 2
[ 245.424272] usb 2-1.1: USB disconnect, device number 4
[ 245.427322] usb 2-1.2: USB disconnect, device number 0
[ 245.752214] usb 2-1.2: device not accepting address 8, error -22
[ 245.752249] hub 2-1:1.0: cannot disable port 2 (err = -19)
[ 245.752277] hub 2-1:1.0: cannot reset port 2 (err = -19)
[ 245.752286] hub 2-1:1.0: cannot disable port 2 (err = -19)
[ 245.752295] hub 2-1:1.0: cannot disable port 2 (err = -19)
[ 245.765511] scsi: killing requests for dead queue
[ 245.769319] usb 2-1.3: USB disconnect, device number 5
[ 246.020199] usb 2-1: new full speed USB device number 9 using uhci_hcd
[ 246.202235] hub 2-1:1.0: USB hub found
[ 246.204194] hub 2-1:1.0: 3 ports detected
[ 246.486043] usb 2-1.1: new low speed USB device number 10 using uhci_hcd
[ 246.643422] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input6
[ 246.643873] generic-usb 0003:05AC:0307.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[ 246.722026] usb 2-1.3: new full speed USB device number 11 using uhci_hcd
[ 246.877809] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input7
[ 246.878277] generic-usb 0003:05AC:020C.0005: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[ 246.892380] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input8
[ 246.892821] generic-usb 0003:05AC:020C.0006: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[ 247.145900] usb 2-1.2: new full speed USB device number 12 using uhci_hcd
[ 247.270334] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 247.270346] usb 2-1.2: no configuration chosen from 1 choice
[ 253.602783] usb 2-1.2: USB disconnect, device number 12
[ 254.441635] usb 2-1.2: new full speed USB device number 13 using uhci_hcd
[ 254.567057] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 254.567070] usb 2-1.2: no configuration chosen from 1 choice
[ 254.754586] usb 2-1.2: USB disconnect, device number 13
[ 255.593484] usb 2-1.2: new full speed USB device number 14 using uhci_hcd
[ 255.731986] scsi3 : usb-storage 2-1.2:1.0
[ 256.736369] scsi 3:0:0:0: Direct-Access DISNEY MIX STICK 0100 PQ: 0 ANSI: 4
[ 256.736500] scsi: killing requests for dead queue
[ 256.736639] scsi: killing requests for dead queue
[ 256.736750] scsi: killing requests for dead queue
[ 256.736857] scsi: killing requests for dead queue
[ 256.736962] scsi: killing requests for dead queue
[ 256.737070] scsi: killing requests for dead queue
[ 256.737175] scsi: killing requests for dead queue
[ 256.737300] scsi: killing requests for dead queue
[ 256.745848] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 256.748754] sd 3:0:0:0: [sdb] 248320 512-byte logical blocks: (127 MB/121 MiB)
[ 256.751350] sd 3:0:0:0: [sdb] Write Protect is off
[ 256.751367] sd 3:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 256.754352] sd 3:0:0:0: [sdb] No Caching mode page present
[ 256.754371] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 256.771363] sd 3:0:0:0: [sdb] No Caching mode page present
[ 256.771383] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 256.778707] sdb: sdb1
[ 256.793399] sd 3:0:0:0: [sdb] No Caching mode page present
[ 256.793423] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 256.793434] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 257.205199] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 257.290193] usb 2-1.2: device descriptor read/64, error -71
[ 257.477137] usb 2-1.2: device descriptor read/64, error -71
[ 257.653110] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 257.950131] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 258.034065] usb 2-1.2: device descriptor read/64, error -71
[ 258.222013] usb 2-1.2: device descriptor read/64, error -71
[ 258.398026] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 258.481994] usb 2-1.2: device descriptor read/64, error -71
[ 258.669978] usb 2-1.2: device descriptor read/64, error -71
[ 258.845950] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 259.256069] usb 2-1.2: device not accepting address 14, error -71
[ 259.329853] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 259.621815] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 259.705799] usb 2-1.2: device descriptor read/64, error -71
[ 259.893752] usb 2-1.2: device descriptor read/64, error -71
[ 260.069741] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 260.153780] usb 2-1.2: device descriptor read/64, error -71
[ 290.921578] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 321.193502] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 352.169333] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 352.281350] sd 3:0:0:0: [sdb] Unhandled error code
[ 352.281370] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
[ 352.281382] sd 3:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 01 e8 00 00 08 00
[ 352.281405] end_request: I/O error, dev sdb, sector 488
[ 352.281423] quiet_error: 12 callbacks suppressed
[ 352.281431] Buffer I/O error on device sdb, logical block 61
[ 373.649790] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 373.733739] usb 2-1.2: device descriptor read/64, error -71
[ 373.917719] usb 2-1.2: device descriptor read/64, error -71
[ 374.093691] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 374.177662] usb 2-1.2: device descriptor read/64, error -71
[ 374.365679] usb 2-1.2: device descriptor read/64, error -71
[ 374.542439] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 374.952210] usb 2-1.2: device not accepting address 14, error -71
[ 375.025554] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 406.121316] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 437.161140] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 468.137964] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 480.328189] INFO: task udisks-part-id:2863 blocked for more than 120 seconds.
[ 480.328205] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 480.328213] udisks-part-id D e9b97c28 0 2863 2197 0x00000004
[ 480.328226] e9b97c90 00000046 00000000 e9b97c28 c10e8777 0000000e c175ffe0 c186bec0
[ 480.328240] c186bec0 417130c9 00000052 ec005ec0 eb6cbfc0 c175ffe0 00000001 e9b97c58
[ 480.328254] 00000001 00000002 00000092 06b0f103 c10e6b80 c17aa300 e9b97c90 c107114b
[ 480.328267] Call Trace:
[ 480.328309] [] ? pagevec_lookup_tag+0x27/0x30
[ 480.328321] [] ? set_page_dirty_lock+0x50/0x50
[ 480.328334] [] ? ktime_get_ts+0xeb/0x120
[ 480.328356] [] schedule+0x35/0x50
[ 480.328363] [] io_schedule+0x78/0xb0
[ 480.328384] [] sleep_on_page+0xd/0x20
[ 480.328393] [] __wait_on_bit_lock+0x47/0x90
[ 480.328400] [] ? find_get_pages+0x2e/0x110
[ 480.328408] [] ? __lock_page+0x80/0x80
[ 480.328417] [] __lock_page+0x78/0x80
[ 480.328438] [] ? autoremove_wake_function+0x50/0x50
[ 480.328449] [] truncate_inode_pages_range+0x31c/0x330
[ 480.328462] [] ? smp_call_function_many+0x1c7/0x200
[ 480.328478] [] ? buffer_cpu_notify+0x80/0x80
[ 480.328486] [] ? buffer_cpu_notify+0x80/0x80
[ 480.328493] [] ? invalidate_bh_lru+0x24/0x40
[ 480.328501] [] ? buffer_cpu_notify+0x80/0x80
[ 480.328510] [] truncate_inode_pages+0x1f/0x30
[ 480.328518] [] __blkdev_put+0x147/0x1a0
[ 480.328525] [] blkdev_put+0x28/0x120
[ 480.328532] [] blkdev_close+0x1d/0x20
[ 480.328552] [] __fput+0x98/0x1c0
[ 480.328560] [] fput+0x1d/0x30
[ 480.328568] [] filp_close+0x54/0x80
[ 480.328580] [] put_files_struct.part.14+0x5b/0xa0
[ 480.328588] [] put_files_struct+0x17/0x20
[ 480.328595] [] exit_files+0x46/0x60
[ 480.328603] [] do_exit+0x15d/0x3a0
[ 480.328617] [] ? recalc_sigpending+0x17/0x40
[ 480.328625] [] do_group_exit+0x38/0xa0
[ 480.328636] [] get_signal_to_deliver+0x215/0x3c0
[ 480.328645] [] ? do_sync_read+0xa4/0xe0
[ 480.328656] [] do_signal+0x61/0x110
[ 480.328676] [] ? security_file_permission+0x90/0xb0
[ 480.328685] [] ? rw_verify_area+0x6c/0x120
[ 480.328693] [] ? vfs_read+0x8c/0x160
[ 480.328701] [] ? do_sync_write+0xe0/0xe0
[ 480.328709] [] ? sys_read+0x3d/0x70
[ 480.328716] [] do_notify_resume+0x75/0x90
[ 480.328725] [] work_notifysig+0x13/0x1b
[ 499.113790] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 530.089620] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 530.200645] sd 3:0:0:0: [sdb] Unhandled error code
[ 530.200665] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
[ 530.200676] sd 3:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 530.200700] end_request: I/O error, dev sdb, sector 0
[ 530.200717] Buffer I/O error on device sdb, logical block 0
[ 561.193429] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 592.169276] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 623.150077] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 647.390146] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 647.478057] usb 2-1.2: device descriptor read/64, error -71
[ 647.610113] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 647.869951] usb 2-1.2: device descriptor read/64, error -71
[ 648.045966] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 648.133958] usb 2-1.2: device descriptor read/64, error -71
[ 648.321996] usb 2-1.2: device descriptor read/64, error -71
[ 648.441963] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 648.701813] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 649.112168] usb 2-1.2: device not accepting address 14, error -71
[ 649.185740] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 678.026013] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 678.113957] usb 2-1.2: device descriptor read/64, error -71
[ 678.301882] usb 2-1.2: device descriptor read/64, error -71
[ 678.478418] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 678.964072] usb 2-1.2: device not accepting address 14, error -71
[ 679.037770] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 679.173753] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 679.281869] sd 3:0:0:0: [sdb] Unhandled error code
[ 679.281887] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 679.281898] sd 3:0:0:0: [sdb] CDB: Read(10): 28 00 00 03 c9 28 00 00 08 00
[ 679.281921] end_request: I/O error, dev sdb, sector 248104
[ 679.281941] Buffer I/O error on device sdb1, logical block 31008
[ 687.606401] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 687.695350] usb 2-1.2: device descriptor read/64, error -71
[ 687.882280] usb 2-1.2: device descriptor read/64, error -71
[ 688.057266] usb 2-1.2: reset full speed USB device number 14 using uhci_hcd
[ 688.191319] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 688.192543] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.193230] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.196683] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.197204] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.197212] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 688.198240] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 688.199195] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.200736] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.201205] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.202213] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.203222] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.203232] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 688.204738] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 688.205209] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.206218] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.207218] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.208770] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.209210] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.209218] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 688.210218] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 688.211269] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.213076] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.214708] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.215213] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.216644] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 688.216658] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 688.217202] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 688.218242] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 688.218482] sd 3:0:0:0: [sdb] Unhandled error code
[ 688.218490] sd 3:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 688.218501] sd 3:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 688.218522] end_request: I/O error, dev sdb, sector 0
[ 688.218534] Buffer I/O error on device sdb, logical block 0
[ 688.221142] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 688.222007] sdb: detected capacity change from 127139840 to 0
[ 688.368239] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 688.368264] usb 2-1: USB disconnect, device number 9
[ 688.368271] usb 2-1.1: USB disconnect, device number 10
[ 688.369329] usb 2-1.2: USB disconnect, device number 14
[ 688.382347] scsi: killing requests for dead queue
[ 688.387027] usb 2-1.3: USB disconnect, device number 11
[ 688.640190] usb 2-1: new full speed USB device number 15 using uhci_hcd
[ 688.821318] hub 2-1:1.0: USB hub found
[ 688.823164] hub 2-1:1.0: 3 ports detected
[ 689.106057] usb 2-1.1: new low speed USB device number 16 using uhci_hcd
[ 689.267023] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input9
[ 689.267761] generic-usb 0003:05AC:0307.0007: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[ 689.342046] usb 2-1.3: new full speed USB device number 17 using uhci_hcd
[ 689.492796] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input10
[ 689.493266] generic-usb 0003:05AC:020C.0008: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[ 689.504430] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input11
[ 689.504827] generic-usb 0003:05AC:020C.0009: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[ 689.826017] usb 2-1.2: new full speed USB device number 18 using uhci_hcd
[ 689.953430] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 689.953444] usb 2-1.2: no configuration chosen from 1 choice
[ 689.955946] usb 2-1.2: USB disconnect, device number 18
[ 690.849811] usb 2-1.2: new full speed USB device number 19 using uhci_hcd
[ 690.935434] usb 2-1.2: device descriptor read/64, error -71
[ 691.121754] usb 2-1.2: device descriptor read/64, error -71
[ 691.301776] usb 2-1.2: new full speed USB device number 20 using uhci_hcd
[ 691.385699] usb 2-1.2: device descriptor read/64, error -71
[ 691.501666] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.502635] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.503633] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.504643] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.505634] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.505642] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 691.506633] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 691.507632] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.508639] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.509634] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.510631] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.511630] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.511637] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 691.512639] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 691.513633] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.514630] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.515629] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.516638] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.517632] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 691.517639] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 691.518630] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 691.518641] hub 2-1:1.0: unable to enumerate USB device on port 2
[ 691.519631] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 691.521160] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 691.592114] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 691.592136] usb 2-1: USB disconnect, device number 15
[ 691.592143] usb 2-1.1: USB disconnect, device number 16
[ 691.593144] usb 2-1.3: USB disconnect, device number 17
[ 691.848066] usb 2-1: new full speed USB device number 23 using uhci_hcd
[ 692.025552] hub 2-1:1.0: USB hub found
[ 692.027633] hub 2-1:1.0: 3 ports detected
[ 692.309519] usb 2-1.1: new low speed USB device number 24 using uhci_hcd
[ 692.467318] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input12
[ 692.468681] generic-usb 0003:05AC:0307.000A: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[ 692.541515] usb 2-1.3: new full speed USB device number 25 using uhci_hcd
[ 692.693145] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input13
[ 692.693595] generic-usb 0003:05AC:020C.000B: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[ 692.702763] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input14
[ 692.703180] generic-usb 0003:05AC:020C.000C: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[ 693.025471] usb 2-1.2: new full speed USB device number 26 using uhci_hcd
[ 693.159904] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 693.159916] usb 2-1.2: no configuration chosen from 1 choice
[ 693.164416] usb 2-1.2: USB disconnect, device number 26
[ 694.049265] usb 2-1.2: new full speed USB device number 27 using uhci_hcd
[ 694.540144] usb 2-1.2: device not accepting address 27, error -71
[ 694.614209] usb 2-1.2: new full speed USB device number 28 using uhci_hcd
[ 694.736956] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 694.736971] usb 2-1.2: no configuration chosen from 1 choice
[ 728.544145] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 728.544167] usb 2-1: USB disconnect, device number 23
[ 728.544174] usb 2-1.1: USB disconnect, device number 24
[ 728.545164] usb 2-1.2: USB disconnect, device number 28
[ 728.545314] usb 2-1.3: USB disconnect, device number 25
[ 728.796076] usb 2-1: new full speed USB device number 29 using uhci_hcd
[ 728.974796] hub 2-1:1.0: USB hub found
[ 728.976641] hub 2-1:1.0: 3 ports detected
[ 729.257350] usb 2-1.1: new low speed USB device number 30 using uhci_hcd
[ 729.414751] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input15
[ 729.415216] generic-usb 0003:05AC:0307.000D: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[ 729.489312] usb 2-1.3: new full speed USB device number 31 using uhci_hcd
[ 729.640010] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input16
[ 729.641185] generic-usb 0003:05AC:020C.000E: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[ 729.650590] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input17
[ 729.651019] generic-usb 0003:05AC:020C.000F: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[ 729.885243] usb 2-1.2: new full speed USB device number 32 using uhci_hcd
[ 730.012698] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 730.012711] usb 2-1.2: no configuration chosen from 1 choice
[ 730.707114] usb 2-1.2: USB disconnect, device number 32
[ 731.545994] usb 2-1.2: new full speed USB device number 33 using uhci_hcd
[ 731.670396] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 731.670408] usb 2-1.2: no configuration chosen from 1 choice
[ 734.000144] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 734.000168] usb 2-1: USB disconnect, device number 29
[ 734.000174] usb 2-1.1: USB disconnect, device number 30
[ 734.001156] usb 2-1.2: USB disconnect, device number 33
[ 734.001307] usb 2-1.3: USB disconnect, device number 31
[ 734.260061] usb 2-1: new full speed USB device number 34 using uhci_hcd
[ 734.438706] hub 2-1:1.0: USB hub found
[ 734.440713] hub 2-1:1.0: 3 ports detected
[ 734.721434] usb 2-1.1: new low speed USB device number 35 using uhci_hcd
[ 734.878845] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input18
[ 734.879306] generic-usb 0003:05AC:0307.0010: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[ 734.953396] usb 2-1.3: new full speed USB device number 36 using uhci_hcd
[ 735.104204] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input19
[ 735.104670] generic-usb 0003:05AC:020C.0011: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[ 735.113694] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input20
[ 735.114059] generic-usb 0003:05AC:020C.0012: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[ 735.386419] usb 2-1.2: new full speed USB device number 37 using uhci_hcd
[ 735.508104] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 735.508117] usb 2-1.2: no configuration chosen from 1 choice
[ 735.701196] usb 2-1.2: USB disconnect, device number 37
[ 736.538173] usb 2-1.2: new full speed USB device number 38 using uhci_hcd
[ 736.622219] usb 2-1.2: device descriptor read/64, error -71
[ 736.810122] usb 2-1.2: device descriptor read/64, error -71
[ 736.990153] usb 2-1.2: new full speed USB device number 39 using uhci_hcd
[ 737.078079] usb 2-1.2: device descriptor read/64, error -71
[ 737.266025] usb 2-1.2: device descriptor read/64, error -71
[ 737.369982] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 737.370977] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 737.371975] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 737.372983] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 737.373974] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 737.374973] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 737.374980] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 737.375971] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 737.376986] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 737.377972] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 737.378973] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 737.379970] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 737.380980] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 737.380988] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 737.381974] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 737.381987] hub 2-1:1.0: unable to enumerate USB device on port 2
[ 737.382972] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 737.383971] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 737.384000] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 737.384049] usb 2-1: USB disconnect, device number 34
[ 737.384056] usb 2-1.1: USB disconnect, device number 35
[ 737.391042] usb 2-1.3: USB disconnect, device number 36
[ 737.636081] usb 2-1: new full speed USB device number 42 using uhci_hcd
[ 737.815967] hub 2-1:1.0: USB hub found
[ 737.818008] hub 2-1:1.0: 3 ports detected
[ 738.097872] usb 2-1.1: new low speed USB device number 43 using uhci_hcd
[ 738.264249] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input21
[ 738.264718] generic-usb 0003:05AC:0307.0013: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[ 738.337840] usb 2-1.3: new full speed USB device number 44 using uhci_hcd
[ 738.488629] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input22
[ 738.489084] generic-usb 0003:05AC:020C.0014: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[ 738.498129] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input23
[ 738.498562] generic-usb 0003:05AC:020C.0015: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[ 738.841863] usb 2-1.2: new full speed USB device number 45 using uhci_hcd
[ 739.328067] usb 2-1.2: device not accepting address 45, error -71
[ 739.401658] usb 2-1.2: new full speed USB device number 46 using uhci_hcd
[ 739.888129] usb 2-1.2: device not accepting address 46, error -71
[ 739.961592] usb 2-1.2: new full speed USB device number 47 using uhci_hcd
[ 740.372105] usb 2-1.2: device not accepting address 47, error -71
[ 740.445566] usb 2-1.2: new full speed USB device number 48 using uhci_hcd
[ 740.856097] usb 2-1.2: device not accepting address 48, error -71
[ 740.857438] hub 2-1:1.0: unable to enumerate USB device on port 2
[ 4480.042053] usb 2-1.2: new full speed USB device number 49 using uhci_hcd
[ 4480.167670] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 4480.167685] usb 2-1.2: no configuration chosen from 1 choice
[ 5421.507842] usb 2-1.2: USB disconnect, device number 49
[ 5422.349715] usb 2-1.2: new full speed USB device number 50 using uhci_hcd
[ 5422.474134] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 5422.474149] usb 2-1.2: no configuration chosen from 1 choice
[ 6947.524991] usb 2-1.2: USB disconnect, device number 50
[ 6948.369874] usb 2-1.2: new full speed USB device number 51 using uhci_hcd
[ 6948.502344] scsi4 : usb-storage 2-1.2:1.0
[ 6949.504762] scsi 4:0:0:0: Direct-Access DISNEY MIX STICK 0100 PQ: 0 ANSI: 4
[ 6949.504898] scsi: killing requests for dead queue
[ 6949.505031] scsi: killing requests for dead queue
[ 6949.505135] scsi: killing requests for dead queue
[ 6949.505242] scsi: killing requests for dead queue
[ 6949.505346] scsi: killing requests for dead queue
[ 6949.505450] scsi: killing requests for dead queue
[ 6949.505556] scsi: killing requests for dead queue
[ 6949.505683] scsi: killing requests for dead queue
[ 6949.516583] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 6949.519791] sd 4:0:0:0: [sdb] 248320 512-byte logical blocks: (127 MB/121 MiB)
[ 6949.523790] sd 4:0:0:0: [sdb] Write Protect is off
[ 6949.523810] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 6949.526757] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6949.526774] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6949.542765] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6949.542787] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6949.549892] sdb: sdb1
[ 6949.563817] sd 4:0:0:0: [sdb] No Caching mode page present
[ 6949.563836] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6949.563850] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7532.089404] usb 2-1.2: reset full speed USB device number 51 using uhci_hcd
[ 7540.118058] usb 2-1.2: reset full speed USB device number 51 using uhci_hcd
[ 7542.109729] usb 2-1.2: reset full speed USB device number 51 using uhci_hcd
[ 8726.078013] usb 2-1.2: reset full speed USB device number 51 using uhci_hcd
[ 8728.009691] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.010677] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.011697] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.013507] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.014701] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.014712] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 8728.016870] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 8728.017683] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.018683] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.019830] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.020672] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.021687] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.021698] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 8728.022659] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 8728.023677] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.024816] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.025717] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.026710] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.027671] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.027681] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 8728.028739] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 8728.029691] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.030668] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.031667] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.032685] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.032735] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 8728.032751] usb 2-1: USB disconnect, device number 42
[ 8728.032757] usb 2-1.1: USB disconnect, device number 43
[ 8728.034677] usb 2-1.2: USB disconnect, device number 51
[ 8728.034708] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8728.034717] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 8728.034731] hub 2-1:1.0: cannot disable port 2 (err = -19)
[ 8728.034740] hub 2-1:1.0: cannot disable port 2 (err = -19)
[ 8728.049757] scsi: killing requests for dead queue
[ 8728.050572] usb 2-1.3: USB disconnect, device number 44
[ 8728.292102] usb 2-1: new full speed USB device number 52 using uhci_hcd
[ 8728.470881] hub 2-1:1.0: USB hub found
[ 8728.472635] hub 2-1:1.0: 3 ports detected
[ 8728.753641] usb 2-1.1: new low speed USB device number 53 using uhci_hcd
[ 8728.911286] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input24
[ 8728.912663] generic-usb 0003:05AC:0307.0016: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[ 8728.985560] usb 2-1.3: new full speed USB device number 54 using uhci_hcd
[ 8729.135163] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input25
[ 8729.135620] generic-usb 0003:05AC:020C.0017: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[ 8729.148152] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input26
[ 8729.148517] generic-usb 0003:05AC:020C.0018: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[ 8729.445860] usb 2-1.2: new full speed USB device number 55 using uhci_hcd
[ 8729.568860] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 8729.568873] usb 2-1.2: no configuration chosen from 1 choice
[ 8730.395282] usb 2-1.2: USB disconnect, device number 55
[ 8731.237140] usb 2-1.2: new full speed USB device number 56 using uhci_hcd
[ 8731.363916] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 8731.363929] usb 2-1.2: no configuration chosen from 1 choice
[ 8953.718009] usb 2-1.2: USB disconnect, device number 56
[ 8954.561938] usb 2-1.2: new full speed USB device number 57 using uhci_hcd
[ 8954.566971] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 8955.236086] usb 2-1.2: device not accepting address 57, error -71
[ 8955.309815] usb 2-1.2: new full speed USB device number 58 using uhci_hcd
[ 8955.450821] scsi5 : usb-storage 2-1.2:1.0
[ 8956.533557] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8956.644698] scsi 5:0:0:0: Direct-Access DISNEY MIX STICK 0100 PQ: 0 ANSI: 4
[ 8956.644952] scsi: killing requests for dead queue
[ 8956.645105] scsi: killing requests for dead queue
[ 8956.645214] scsi: killing requests for dead queue
[ 8956.645325] scsi: killing requests for dead queue
[ 8956.645429] scsi: killing requests for dead queue
[ 8956.645557] scsi: killing requests for dead queue
[ 8956.645666] scsi: killing requests for dead queue
[ 8956.645772] scsi: killing requests for dead queue
[ 8956.653166] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 8956.655598] sd 5:0:0:0: [sdb] 248320 512-byte logical blocks: (127 MB/121 MiB)
[ 8956.658748] sd 5:0:0:0: [sdb] Write Protect is off
[ 8956.658769] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 8956.661856] sd 5:0:0:0: [sdb] No Caching mode page present
[ 8956.661878] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 8956.679608] sd 5:0:0:0: [sdb] No Caching mode page present
[ 8956.679626] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 8956.688466] sdb: sdb1
[ 8956.701628] sd 5:0:0:0: [sdb] No Caching mode page present
[ 8956.701649] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 8956.701662] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 8957.329417] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8957.721389] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8957.805340] usb 2-1.2: device descriptor read/64, error -71
[ 8957.994363] usb 2-1.2: device descriptor read/64, error -71
[ 8958.170294] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8958.409270] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8958.439974] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 8958.704321] usb 2-1.2: device descriptor read/64, error -71
[ 8958.898232] usb 2-1.2: device descriptor read/64, error -71
[ 8959.074153] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8959.162127] usb 2-1.2: device descriptor read/64, error -71
[ 8966.577897] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8966.665883] usb 2-1.2: device descriptor read/64, error -71
[ 8966.853828] usb 2-1.2: device descriptor read/64, error -71
[ 8967.029770] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8967.516209] usb 2-1.2: device not accepting address 58, error -71
[ 8967.589698] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8968.238191] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8968.325558] usb 2-1.2: device descriptor read/64, error -71
[ 8968.513562] usb 2-1.2: device descriptor read/64, error -71
[ 8968.689583] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8968.777523] usb 2-1.2: device descriptor read/64, error -71
[ 8968.965480] usb 2-1.2: device descriptor read/64, error -71
[ 8969.141474] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8970.210271] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8970.297289] usb 2-1.2: device descriptor read/64, error -71
[ 8970.485802] usb 2-1.2: device descriptor read/64, error -71
[ 8970.662186] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8971.152161] usb 2-1.2: device not accepting address 58, error -71
[ 8971.226104] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8971.271335] sd 5:0:0:0: [sdb] Unhandled error code
[ 8971.271354] sd 5:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 8971.271365] sd 5:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 03 80 00 00 08 00
[ 8971.271389] end_request: I/O error, dev sdb, sector 896
[ 8971.271407] Buffer I/O error on device sdb, logical block 112
[ 8986.885467] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8987.125539] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8987.213443] usb 2-1.2: device descriptor read/64, error -71
[ 8987.403070] usb 2-1.2: device descriptor read/64, error -71
[ 8987.577366] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8988.064137] usb 2-1.2: device not accepting address 58, error -71
[ 8988.137230] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8991.592198] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8992.080167] usb 2-1.2: device not accepting address 58, error -71
[ 8992.153634] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8994.926216] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8995.014205] usb 2-1.2: device descriptor read/64, error -71
[ 8995.202109] usb 2-1.2: device descriptor read/64, error -71
[ 8995.378172] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8995.870410] usb 2-1.2: device not accepting address 58, error -71
[ 8995.945955] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8996.356099] usb 2-1.2: device not accepting address 58, error -71
[ 8996.429907] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8998.346638] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8998.433555] usb 2-1.2: device descriptor read/64, error -71
[ 8998.621511] usb 2-1.2: device descriptor read/64, error -71
[ 8998.801526] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8999.097465] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8999.585197] usb 2-1.2: device not accepting address 58, error -71
[ 8999.658403] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 8999.741330] usb 2-1.2: device descriptor read/64, error -71
[ 8999.929309] usb 2-1.2: device descriptor read/64, error -71
[ 9000.105405] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 9000.141371] sd 5:0:0:0: [sdb] Unhandled error code
[ 9000.141389] sd 5:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 9000.141400] sd 5:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 03 80 00 00 08 00
[ 9000.141424] end_request: I/O error, dev sdb, sector 896
[ 9000.141441] Buffer I/O error on device sdb, logical block 112
[ 9000.225272] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 9000.317250] usb 2-1.2: device descriptor read/64, error -71
[ 9000.690183] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 9000.774156] usb 2-1.2: device descriptor read/64, error -71
[ 9000.962197] usb 2-1.2: device descriptor read/64, error -71
[ 9001.138190] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 9002.497961] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 9003.313832] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 9003.397770] usb 2-1.2: device descriptor read/64, error -71
[ 9018.497180] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 9049.134186] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 9049.245078] sd 5:0:0:0: [sdb] Unhandled error code
[ 9049.245095] sd 5:0:0:0: [sdb] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
[ 9049.245106] sd 5:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 02 00 00 00 08 00
[ 9049.245128] end_request: I/O error, dev sdb, sector 512
[ 9049.245145] Buffer I/O error on device sdb, logical block 64
[ 9051.601725] usb 2-1.2: reset full speed USB device number 58 using uhci_hcd
[ 9051.685663] usb 2-1.2: device descriptor read/64, error -71
[ 9051.873675] usb 2-1.2: device descriptor read/64, error -71
[ 9051.920369] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 9051.920394] usb 2-1: USB disconnect, device number 52
[ 9051.920401] usb 2-1.1: USB disconnect, device number 53
[ 9051.922574] usb 2-1.2: USB disconnect, device number 0
[ 9051.976663] hub 2-1:1.0: cannot disable port 2 (err = -19)
[ 9051.976699] hub 2-1:1.0: cannot reset port 2 (err = -19)
[ 9051.976709] hub 2-1:1.0: cannot disable port 2 (err = -19)
[ 9051.976717] hub 2-1:1.0: cannot disable port 2 (err = -19)
[ 9051.977851] sd 5:0:0:0: [sdb] Unhandled error code
[ 9051.977860] sd 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 9051.977871] sd 5:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 9051.977892] end_request: I/O error, dev sdb, sector 0
[ 9051.977906] Buffer I/O error on device sdb, logical block 0
[ 9051.978227] scsi: killing requests for dead queue
[ 9051.978706] usb 2-1.3: USB disconnect, device number 54
[ 9052.220241] usb 2-1: new full speed USB device number 59 using uhci_hcd
[ 9052.397735] hub 2-1:1.0: USB hub found
[ 9052.399567] hub 2-1:1.0: 3 ports detected
[ 9052.681457] usb 2-1.1: new low speed USB device number 60 using uhci_hcd
[ 9052.838902] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input27
[ 9052.839363] generic-usb 0003:05AC:0307.0019: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[ 9052.913423] usb 2-1.3: new full speed USB device number 61 using uhci_hcd
[ 9053.064188] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input28
[ 9053.064665] generic-usb 0003:05AC:020C.001A: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[ 9053.074705] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input29
[ 9053.075134] generic-usb 0003:05AC:020C.001B: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[ 9053.357410] usb 2-1.2: new full speed USB device number 62 using uhci_hcd
[ 9053.479852] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 9053.479866] usb 2-1.2: no configuration chosen from 1 choice
[ 9053.670326] usb 2-1.2: USB disconnect, device number 62
[ 9054.513165] usb 2-1.2: new full speed USB device number 63 using uhci_hcd
[ 9054.597140] usb 2-1.2: device descriptor read/64, error -71
[ 9054.786152] usb 2-1.2: device descriptor read/64, error -71
[ 9054.962139] usb 2-1.2: new full speed USB device number 64 using uhci_hcd
[ 9055.050078] usb 2-1.2: device descriptor read/64, error -71
[ 9055.640083] usb 2-1.2: device not accepting address 64, error -71
[ 9055.641951] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 9055.642947] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 9055.643944] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 9055.644956] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 9055.645946] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 9055.646944] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 9055.646952] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 9055.647942] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 9055.648955] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 9055.649945] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 9055.650943] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 9055.651940] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 9055.652952] hub 2-1:1.0: cannot reset port 2 (err = -71)
[ 9055.652960] hub 2-1:1.0: Cannot enable port 2. Maybe the USB cable is bad?
[ 9055.653945] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 9055.653958] hub 2-1:1.0: unable to enumerate USB device on port 2
[ 9055.654941] hub 2-1:1.0: cannot disable port 2 (err = -71)
[ 9055.655942] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 9055.655972] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 9055.655983] usb 2-1: USB disconnect, device number 59
[ 9055.655989] usb 2-1.1: USB disconnect, device number 60
[ 9055.663001] usb 2-1.3: USB disconnect, device number 61
[ 9055.908059] usb 2-1: new full speed USB device number 67 using uhci_hcd
[ 9056.087243] hub 2-1:1.0: USB hub found
[ 9056.088929] hub 2-1:1.0: 3 ports detected
[ 9056.369844] usb 2-1.1: new low speed USB device number 68 using uhci_hcd
[ 9056.527250] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input30
[ 9056.527715] generic-usb 0003:05AC:0307.001C: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[ 9056.601808] usb 2-1.3: new full speed USB device number 69 using uhci_hcd
[ 9056.752601] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input31
[ 9056.753061] generic-usb 0003:05AC:020C.001D: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[ 9056.763088] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input32
[ 9056.763515] generic-usb 0003:05AC:020C.001E: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[ 9057.069814] usb 2-1.2: new full speed USB device number 70 using uhci_hcd
[ 9057.193162] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 9057.193175] usb 2-1.2: no configuration chosen from 1 choice
[ 9057.253722] usb 2-1.2: USB disconnect, device number 70
[ 9058.039392] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 9058.303155] usb 2-1.2: new full speed USB device number 71 using uhci_hcd
[ 9058.389514] usb 2-1.2: device descriptor read/64, error -71
[ 9058.617916] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 9058.617929] usb 2-1.2: no configuration chosen from 1 choice
[ 9058.916440] usb 2-1.2: USB disconnect, device number 71
[ 9059.761313] usb 2-1.2: new full speed USB device number 72 using uhci_hcd
[ 9059.895782] scsi6 : usb-storage 2-1.2:1.0
[ 9060.104119] usb 2-1: USB disconnect, device number 67
[ 9060.104132] usb 2-1.1: USB disconnect, device number 68
[ 9060.105124] usb 2-1.2: USB disconnect, device number 72
[ 9060.106119] usb 2-1.3: USB disconnect, device number 69
[ 9060.348080] usb 2-1: new full speed USB device number 73 using uhci_hcd
[ 9060.526385] hub 2-1:1.0: USB hub found
[ 9060.528674] hub 2-1:1.0: 3 ports detected
[ 9060.809104] usb 2-1.1: new low speed USB device number 74 using uhci_hcd
[ 9060.966539] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input33
[ 9060.967005] generic-usb 0003:05AC:0307.001F: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[ 9061.042064] usb 2-1.3: new full speed USB device number 75 using uhci_hcd
[ 9061.192860] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input34
[ 9061.193320] generic-usb 0003:05AC:020C.0020: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[ 9061.203343] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input35
[ 9061.203772] generic-usb 0003:05AC:020C.0021: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[ 9061.554056] usb 2-1.2: new full speed USB device number 76 using uhci_hcd
[ 9061.679394] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 9061.679406] usb 2-1.2: no configuration chosen from 1 choice
[ 9076.449511] usb 2-1.2: USB disconnect, device number 76
[ 9077.293401] usb 2-1.2: new full speed USB device number 77 using uhci_hcd
[ 9077.784146] usb 2-1.2: device not accepting address 77, error -71
[ 9077.857294] usb 2-1.2: new full speed USB device number 78 using uhci_hcd
[ 9077.985795] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[ 9077.985808] usb 2-1.2: no configuration chosen from 1 choice
[ 9077.989275] usb 2-1.2: USB disconnect, device number 78
[ 9078.954119] usb 2-1.2: new full speed USB device number 79 using uhci_hcd
[ 9079.093452] scsi7 : usb-storage 2-1.2:1.0
[ 9080.105644] scsi 7:0:0:0: Direct-Access DISNEY MIX STICK 0100 PQ: 0 ANSI: 4
[ 9080.106631] scsi: killing requests for dead queue
[ 9080.107603] scsi: killing requests for dead queue
[ 9080.107831] scsi: killing requests for dead queue
[ 9080.112726] scsi: killing requests for dead queue
[ 9080.114199] scsi: killing requests for dead queue
[ 9080.116717] scsi: killing requests for dead queue
[ 9080.117928] scsi: killing requests for dead queue
[ 9080.118654] scsi: killing requests for dead queue
[ 9080.131481] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 9080.134010] sd 7:0:0:0: [sdb] 248320 512-byte logical blocks: (127 MB/121 MiB)
[ 9080.136970] sd 7:0:0:0: [sdb] Write Protect is off
[ 9080.136990] sd 7:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 9080.140133] sd 7:0:0:0: [sdb] No Caching mode page present
[ 9080.140154] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 9080.156996] sd 7:0:0:0: [sdb] No Caching mode page present
[ 9080.157017] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 9080.164343] sdb: sdb1
[ 9080.178985] sd 7:0:0:0: [sdb] No Caching mode page present
[ 9080.179009] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 9080.179021] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 9084.027225] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 9084.290741] usb 2-1.2: reset full speed USB device number 79 using uhci_hcd
[ 9084.374239] usb 2-1.2: device descriptor read/64, error -71
[ 9084.563194] usb 2-1.2: device descriptor read/64, error -71
[ 9084.739050] usb 2-1.2: reset full speed USB device number 79 using uhci_hcd
[ 9084.830213] usb 2-1.2: device descriptor read/64, error -71
[ 9085.017210] usb 2-1.2: device descriptor read/64, error -71
[ 9085.194111] usb 2-1.2: reset full speed USB device number 79 using uhci_hcd
[ 9085.608180] usb 2-1.2: device not accepting address 79, error -71
[ 9085.681107] usb 2-1.2: reset full speed USB device number 79 using uhci_hcd
[ 9086.092135] usb 2-1.2: device not accepting address 79, error -71
[ 9086.097329] usb 2-1.2: USB disconnect, device number 79
[ 9086.098374] sd 7:0:0:0: [sdb] Unhandled error code
[ 9086.098383] sd 7:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 9086.098396] sd 7:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 2c 00 00 01 00
[ 9086.098418] end_request: I/O error, dev sdb, sector 44
[ 9086.098752] sd 7:0:0:0: [sdb] Unhandled error code
[ 9086.098758] sd 7:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 9086.098766] sd 7:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 2d 00 00 80 00
[ 9086.098783] end_request: I/O error, dev sdb, sector 45
[ 9086.109657] FAT-fs (sdb1): FAT read failed (blocknr 4)
[ 9086.115596] scsi: killing requests for dead queue
[ 9086.189957] usb 2-1.2: new full speed USB device number 80 using uhci_hcd
[ 9086.273870] usb 2-1.2: device descriptor read/64, error -71
[ 9086.461842] usb 2-1.2: device descriptor read/64, error -71
[ 9086.637878] usb 2-1.2: new full speed USB device number 81 using uhci_hcd
[ 9087.124184] usb 2-1.2: device not accepting address 81, error -71
[ 9087.197738] usb 2-1.2: new full speed USB device number 82 using uhci_hcd
[ 9087.276215] scsi8 : usb-storage 2-1.2:1.0
[ 9088.283727] scsi 8:0:0:0: Direct-Access DISNEY MIX STICK 0100 PQ: 0 ANSI: 4
[ 9088.283974] scsi: killing requests for dead queue
[ 9088.284916] scsi: killing requests for dead queue
[ 9088.285033] scsi: killing requests for dead queue
[ 9088.285143] scsi: killing requests for dead queue
[ 9088.285249] scsi: killing requests for dead queue
[ 9088.288881] scsi: killing requests for dead queue
[ 9088.292721] scsi: killing requests for dead queue
[ 9088.296482] scsi: killing requests for dead queue
[ 9088.303992] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 9088.307648] sd 8:0:0:0: [sdb] 248320 512-byte logical blocks: (127 MB/121 MiB)
[ 9088.310703] sd 8:0:0:0: [sdb] Write Protect is off
[ 9088.310723] sd 8:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 9088.313636] sd 8:0:0:0: [sdb] No Caching mode page present
[ 9088.313656] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 9088.329663] sd 8:0:0:0: [sdb] No Caching mode page present
[ 9088.329686] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 9088.336880] sdb: sdb1
[ 9088.350657] sd 8:0:0:0: [sdb] No Caching mode page present
[ 9088.350678] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 9088.350691] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 9089.377358] usb 2-1.2: reset full speed USB device number 82 using uhci_hcd
[ 9089.461374] usb 2-1.2: device descriptor read/64, error -71
[ 9089.648436] usb 2-1.2: device descriptor read/64, error -71
[ 9089.826340] usb 2-1.2: reset full speed USB device number 82 using uhci_hcd
[ 9091.326203] usb 2-1.2: reset full speed USB device number 82 using uhci_hcd
[ 9092.081952] usb 2-1.2: reset full speed USB device number 82 using uhci_hcd
[ 9098.077969] usb 2-1.2: reset full speed USB device number 82 using uhci_hcd
[ 9100.081620] usb 2-1.2: reset full speed USB device number 82 using uhci_hcd
[ 9101.541354] usb 2-1.2: reset full speed USB device number 82 using uhci_hcd
[ 9104.022015] hub 2-1:1.0: hub_port_status failed (err = -71)
[ 9104.281885] usb 2-1.2: reset full speed USB device number 82 using uhci_hcd
[ 9104.365843] usb 2-1.2: device descriptor read/64, error -71
[ 9104.553910] usb 2-1.2: device descriptor read/64, error -71
[ 9104.729887] usb 2-1.2: reset full speed USB device number 82 using uhci_hcd
[ 9140.077871] usb 2-1.2: reset full speed USB device number 82 using uhci_hcd
[10090.027228] hub 2-1:1.0: hub_port_status failed (err = -71)
[10090.289247] usb 2-1.2: reset full speed USB device number 82 using uhci_hcd
[10090.374254] usb 2-1.2: device descriptor read/64, error -71
[10349.456166] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[10349.456191] usb 2-1: USB disconnect, device number 73
[10349.456198] usb 2-1.1: USB disconnect, device number 74
[10349.457260] usb 2-1.2: USB disconnect, device number 82
[10349.490609] scsi: killing requests for dead queue
[10349.491191] usb 2-1.3: USB disconnect, device number 75
[10349.736184] usb 2-1: new full speed USB device number 83 using uhci_hcd
[10349.915242] hub 2-1:1.0: USB hub found
[10349.917183] hub 2-1:1.0: 3 ports detected
[10350.197887] usb 2-1.1: new low speed USB device number 84 using uhci_hcd
[10350.356340] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input36
[10350.356839] generic-usb 0003:05AC:0307.0022: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[10350.429865] usb 2-1.3: new full speed USB device number 85 using uhci_hcd
[10350.580608] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input37
[10350.581084] generic-usb 0003:05AC:020C.0023: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[10350.592623] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input38
[10350.593020] generic-usb 0003:05AC:020C.0024: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[10350.937715] usb 2-1.2: new full speed USB device number 86 using uhci_hcd
[10351.080177] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[10351.080191] usb 2-1.2: no configuration chosen from 1 choice
[10358.539406] usb 2-1.2: USB disconnect, device number 86
[10359.381291] usb 2-1.2: new full speed USB device number 87 using uhci_hcd
[10359.507729] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[10359.507743] usb 2-1.2: no configuration chosen from 1 choice
[10359.819194] usb 2-1.2: USB disconnect, device number 87
[10360.662049] usb 2-1.2: new full speed USB device number 88 using uhci_hcd
[10360.791631] scsi9 : usb-storage 2-1.2:1.0
[10361.865868] usb 2-1.2: reset full speed USB device number 88 using uhci_hcd
[10362.352148] usb 2-1.2: device not accepting address 88, error -71
[10362.425931] usb 2-1.2: reset full speed USB device number 88 using uhci_hcd
[10362.509763] usb 2-1.2: device descriptor read/64, error -71
[10362.697743] usb 2-1.2: device descriptor read/64, error -71
[10362.873790] usb 2-1.2: reset full speed USB device number 88 using uhci_hcd
[10362.913872] scsi 9:0:0:0: Direct-Access DISNEY MIX STICK 0100 PQ: 0 ANSI: 4
[10362.914122] scsi: killing requests for dead queue
[10362.914268] scsi: killing requests for dead queue
[10362.914377] scsi: killing requests for dead queue
[10362.914482] scsi: killing requests for dead queue
[10362.914591] scsi: killing requests for dead queue
[10362.914724] scsi: killing requests for dead queue
[10362.914833] scsi: killing requests for dead queue
[10362.914938] scsi: killing requests for dead queue
[10362.921026] sd 9:0:0:0: Attached scsi generic sg2 type 0
[10362.924794] sd 9:0:0:0: [sdb] 248320 512-byte logical blocks: (127 MB/121 MiB)
[10362.927787] sd 9:0:0:0: [sdb] Write Protect is off
[10362.927809] sd 9:0:0:0: [sdb] Mode Sense: 38 00 00 00
[10362.930770] sd 9:0:0:0: [sdb] No Caching mode page present
[10362.930789] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[10362.947822] sd 9:0:0:0: [sdb] No Caching mode page present
[10362.947843] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[10362.956486] sdb: sdb1
[10362.969794] sd 9:0:0:0: [sdb] No Caching mode page present
[10362.969815] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[10362.969829] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[10363.157667] usb 2-1.2: reset full speed USB device number 88 using uhci_hcd
[10363.344169] hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[10363.344193] usb 2-1: USB disconnect, device number 83
[10363.344200] usb 2-1.1: USB disconnect, device number 84
[10363.345274] usb 2-1.2: USB disconnect, device number 0
[10363.644113] usb 2-1.2: device not accepting address 88, error -22
[10363.644144] hub 2-1:1.0: cannot disable port 2 (err = -19)
[10363.644168] hub 2-1:1.0: cannot reset port 2 (err = -19)
[10363.644178] hub 2-1:1.0: cannot disable port 2 (err = -19)
[10363.644186] hub 2-1:1.0: cannot disable port 2 (err = -19)
[10363.645418] scsi: killing requests for dead queue
[10363.650556] usb 2-1.3: USB disconnect, device number 85
[10363.651380] BUG: unable to handle kernel NULL pointer dereference at 00000004
[10363.651392] IP: [] sd_revalidate_disk+0x21/0x290
[10363.651424] *pde = 29d9f067 *pte = 00000000
[10363.651433] Oops: 0000 [#1] SMP
[10363.651442] Modules linked in: nls_iso8859_1 nls_cp437 vfat fat usb_storage uas savage drm bnep rfcomm bluetooth dm_crypt snd_via82xx gameport snd_via82xx_modem snd_ac97_codec ac97_bus snd_mpu401_uart snd_pcm snd_seq_midi arc4 snd_rawmidi rt61pci crc_itu_t rt2x00pci snd_seq_midi_event snd_seq ppdev rt2x00lib mac80211 snd_timer cfg80211 snd_seq_device via686a eeprom_93cx6 snd soundcore snd_page_alloc binfmt_misc serio_raw i2c_viapro shpchp parport_pc lp parport vesafb usbhid hid pata_via floppy
[10363.651522]
[10363.651530] Pid: 13500, comm: blkid Not tainted 3.0.0-14-generic #23-Ubuntu VIA Technologies, Inc. VT8365/8365-686B
[10363.651542] EIP: 0060:[] EFLAGS: 00010282 CPU: 0
[10363.651551] EIP is at sd_revalidate_disk+0x21/0x290
[10363.651557] EAX: 00000000 EBX: 00000000 ECX: 00000002 EDX: c1376820
[10363.651563] ESI: ea8d8460 EDI: ea8d8400 EBP: e9b8dd4c ESP: e9b8dd2c
[10363.651569] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[10363.651576] Process blkid (pid: 13500, ti=e9b8c000 task=ebcbd940 task.ti=e9b8c000)
[10363.651582] Stack:
[10363.651586] c1140110 eacfe000 00000000 00000002 00000001 00000000 ea8d8460 ea8d8400
[10363.651599] e9b8ddb8 c117eeb2 00000c95 c13620c7 c107f28a eec7fc20 e9b8dd6c c1343774
[10363.651613] e9b8dd7c c13620b4 ebda6600 ea8d8460 00000000 eacfe000 ea8d9c00 ffffff85
[10363.651627] Call Trace:
[10363.651649] [] ? iput+0x20/0x30
[10363.651662] [] rescan_partitions+0x82/0x350
[10363.651671] [] ? scsi_device_put+0x47/0x50
[10363.651687] [] ? module_refcount+0x7a/0x90
[10363.651704] [] ? put_device+0x14/0x20
[10363.651711] [] ? scsi_device_put+0x34/0x50
[10363.651720] [] ? sd_open+0xff/0x1d0
[10363.651729] [] __blkdev_get+0x266/0x3c0
[10363.651737] [] blkdev_get+0x47/0x180
[10363.651745] [] blkdev_open+0x53/0x70
[10363.651762] [] __dentry_open+0x121/0x2d0
[10363.651770] [] ? blkdev_get+0x180/0x180
[10363.651780] [] nameidata_to_filp+0x86/0x90
[10363.651798] [] do_last+0x327/0x660
[10363.651807] [] path_openat+0x9d/0x350
[10363.651817] [] do_filp_open+0x31/0x80
[10363.651840] [] ? strncpy_from_user+0x38/0x70
[10363.651853] [] ? alloc_fd+0xa3/0xe0
[10363.651870] [] ? do_page_fault+0x22f/0x4a0
[10363.651879] [] do_sys_open+0xe1/0x1f0
[10363.651888] [] sys_open+0x2e/0x40
[10363.651911] [] syscall_call+0x7/0xb
[10363.651916] Code: 74 26 00 8d bc 27 00 00 00 00 55 89 e5 83 ec 20 89 5d f4 89 75 f8 89 7d fc 3e 8d 74 26 00 8b 98 e4 01 00 00 89 c7 a1 40 36 94 c1 73 04 c1 e8 15 83 e0 07 83 f8 03 0f 87 fa 01 00 00 8b 86 8c
[10363.651992] EIP: [] sd_revalidate_disk+0x21/0x290 SS:ESP 0068:e9b8dd2c
[10363.652004] CR2: 0000000000000004
[10363.652231] ---[ end trace 3ce3f65333ef4dcb ]---
[10363.900180] usb 2-1: new full speed USB device number 89 using uhci_hcd
[10364.078778] hub 2-1:1.0: USB hub found
[10364.080736] hub 2-1:1.0: 3 ports detected
[10364.365459] usb 2-1.1: new low speed USB device number 90 using uhci_hcd
[10364.523585] input: Logitech Apple Optical USB Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.1/2-1.1:1.0/input/input39
[10364.525084] generic-usb 0003:05AC:0307.0025: input,hidraw0: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:07.2-1.1/input0
[10364.597423] usb 2-1.3: new full speed USB device number 91 using uhci_hcd
[10364.748206] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.0/input/input40
[10364.748695] generic-usb 0003:05AC:020C.0026: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input0
[10364.760823] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:07.2/usb2/2-1/2-1.3/2-1.3:1.1/input/input41
[10364.761310] generic-usb 0003:05AC:020C.0027: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:07.2-1.3/input1
[10365.009354] usb 2-1.2: new full speed USB device number 92 using uhci_hcd
[10365.133808] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[10365.133825] usb 2-1.2: no configuration chosen from 1 choice
[10365.834201] usb 2-1.2: USB disconnect, device number 92
[10366.802058] usb 2-1.2: new full speed USB device number 93 using uhci_hcd
[10366.926492] usb 2-1.2: rejected 1 configuration due to insufficient available bus power
[10366.926510] usb 2-1.2: no configuration chosen from 1 choice
[11503.565342] usb 2-1.2: USB disconnect, device number 93
[11504.410134] usb 2-1.2: new full speed USB device number 94 using uhci_hcd
[11504.498083] usb 2-1.2: device descriptor read/64, error -71
[11504.687018] usb 2-1.2: device descriptor read/64, error -71
[11504.862165] usb 2-1.2: new full speed USB device number 95 using uhci_hcd
[11504.946108] usb 2-1.2: device descriptor read/64, error -71
[11505.134017] usb 2-1.2: device descriptor read/64, error -71
[11505.309907] usb 2-1.2: new full speed USB device number 96 using uhci_hcd
[11505.370649] scsi10 : usb-storage 2-1.2:1.0
[11506.441739] usb 2-1.2: reset full speed USB device number 96 using uhci_hcd
[11506.526447] usb 2-1.2: device descriptor read/64, error -71
[11506.713710] usb 2-1.2: device descriptor read/64, error -71
[11506.889661] usb 2-1.2: reset full speed USB device number 96 using uhci_hcd
[11507.376064] usb 2-1.2: device not accepting address 96, error -71
[11507.449590] usb 2-1.2: reset full speed USB device number 96 using uhci_hcd
[11507.860111] usb 2-1.2: device not accepting address 96, error -71
[11507.934361] usb 2-1.2: reset full speed USB device number 96 using uhci_hcd
[11508.344169] usb 2-1.2: device not accepting address 96, error -71
[11508.346706] scsi: killing requests for dead queue
[11508.346993] scsi: killing requests for dead queue
[11508.347107] scsi: killing requests for dead queue
[11508.347222] scsi: killing requests for dead queue
[11508.347332] scsi: killing requests for dead queue
[11508.347466] usb 2-1.2: USB disconnect, device number 96
[11508.347628] scsi: killing requests for dead queue
[11508.347739] scsi: killing requests for dead queue
[11508.347845] scsi: killing requests for dead queue
[11508.425395] usb 2-1.2: new full speed USB device number 97 using uhci_hcd
[11508.556907] scsi11 : usb-storage 2-1.2:1.0
[11509.560338] scsi 11:0:0:0: Direct-Access DISNEY MIX STICK 0100 PQ: 0 ANSI: 4
[11509.560475] scsi: killing requests for dead queue
[11509.560625] scsi: killing requests for dead queue
[11509.560739] scsi: killing requests for dead queue
[11509.560850] scsi: killing requests for dead queue
[11509.560954] scsi: killing requests for dead queue
[11509.561060] scsi: killing requests for dead queue
[11509.561187] scsi: killing requests for dead queue
[11509.561294] scsi: killing requests for dead queue
[11509.569662] sd 11:0:0:0: Attached scsi generic sg2 type 0
[11509.574789] sd 11:0:0:0: [sdb] 248320 512-byte logical blocks: (127 MB/121 MiB)
[11509.577308] sd 11:0:0:0: [sdb] Write Protect is off
[11509.577333] sd 11:0:0:0: [sdb] Mode Sense: 38 00 00 00
[11509.580820] sd 11:0:0:0: [sdb] No Caching mode page present
[11509.580838] sd 11:0:0:0: [sdb] Assuming drive cache: write through