dmesg - db76deba-e3fd-4863-8689-1eedda022e83
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.el6.x86_64 (mockbuild@c6b6.centos.org) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Fri May 20 03:51:51 BST 2011
Command line: ro root=/dev/vda1 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet nohpet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fffd000 (usable)
BIOS-e820: 000000003fffd000 - 0000000040000000 (reserved)
BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3fffd max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x1040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000003fffd000
0000000000 - 003fe00000 page 2M
003fe00000 - 003fffd000 page 4k
kernel direct mapping tables up to 3fffd000 @ 8000-b000
RAMDISK: 36dc1000 - 37fef96a
ACPI: RSDP 00000000000fdb90 00014 (v00 BOCHS )
ACPI: RSDT 000000003fffdc00 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 000000003ffffe30 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 000000003fffde00 01FB7 (v01 BXPC BXDSDT 00000001 INTL 20090123)
ACPI: FACS 000000003ffffdc0 00040
ACPI: SSDT 000000003fffdd60 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 000000003fffdc80 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 000000003fffdc40 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000003fffd000
Bootmem setup node 0 0000000000000000-000000003fffd000
NODE_DATA [0000000000009000 - 000000000003cfff]
bootmap [000000000003d000 - 0000000000044fff] pages 8
(7 early reservations) ==> bootmem [0000000000 - 003fffd000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001c9eff8] TEXT DATA BSS ==> [0001000000 - 0001c9eff8]
#3 [0036dc1000 - 0037fef96a] RAMDISK ==> [0036dc1000 - 0037fef96a]
#4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
#5 [0001c9f000 - 0001c9f099] BRK ==> [0001c9f000 - 0001c9f099]
#6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff8800000fdbe0] fdbe0
[ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002200000-ffff880002ffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000001 -> 0x0000009b
0: 0x00000100 -> 0x0003fffd
On node 0 totalpages: 262039
DMA zone: 56 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3834 pages, LIFO batch:0
DMA32 zone: 3528 pages used for memmap
DMA32 zone: 254517 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:beffc000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880001e00000 s95064 r8192 d23720 u2097152
pcpu-alloc: s95064 r8192 d23720 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 258351
Policy zone: DMA32
Kernel command line: ro root=/dev/vda1 rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet nohpet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 1001648k/1048564k available (4935k kernel code, 408k absent, 46508k reserved, 3927k data, 1220k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:256
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 10485760 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2399.738 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.47 BogoMIPS (lpj=2399738)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
mce: CPU supports 10 MCE banks
Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
alternatives: switching to unfair spinlock
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20276 entries in 80 pages
Setting APIC routing to flat
NMI watchdog: CPU not supported
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
APIC timer registered as dummy, due to nmi_watchdog=1!
Brought up 1 CPUs
Total of 1 processors activated (4799.47 BogoMIPS).
Testing NMI watchdog ... OK.
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2600 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 20 io port: [0xc000-0xc00f]
pci 0000:00:01.2: reg 20 io port: [0xc020-0xc03f]
pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10 32bit mmio pref: [0xf0000000-0xf1ffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xf2000000-0xf2000fff]
pci 0000:00:02.0: reg 30 32bit mmio pref: [0xf2010000-0xf201ffff]
pci 0000:00:03.0: reg 10 io port: [0xc040-0xc05f]
pci 0000:00:03.0: reg 14 32bit mmio: [0xf2020000-0xf2020fff]
pci 0000:00:03.0: reg 30 32bit mmio pref: [0xf2030000-0xf203ffff]
pci 0000:00:04.0: reg 10 io port: [0xc060-0xc07f]
pci 0000:00:04.0: reg 14 32bit mmio: [0xf2040000-0xf2040fff]
pci 0000:00:04.0: reg 30 32bit mmio pref: [0xf2050000-0xf205ffff]
pci 0000:00:05.0: reg 10 io port: [0xc080-0xc0bf]
pci 0000:00:05.0: reg 14 32bit mmio: [0xf2060000-0xf2060fff]
pci 0000:00:06.0: reg 10 io port: [0xc0c0-0xc0ff]
pci 0000:00:06.0: reg 14 32bit mmio: [0xf2061000-0xf2061fff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 8 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18618k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1323893093.009:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 1992
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key B5BD89AA2E85EC04
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.0
Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.el6.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:01: setting system clock to 2011-12-14 20:04:54 UTC (1323893094)
Initalizing network drop monitor service
Freeing unused kernel memory: 1220k freed
Write protecting the kernel read-only data: 7176k
dracut: dracut-004-32.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
usb 1-1: new full speed USB device using uhci_hcd and address 2
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
usb 1-1: New USB device found, idVendor=0627, idProduct=0001
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU 0.14.1
usb 1-1: SerialNumber: 42
usb 1-1: configuration #1 chosen from 1 choice
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
input: QEMU 0.14.1 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input4
generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.14.1 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
ata2.01: NODEV after polling detection
ata2.00: ATAPI: QEMU DVD-ROM, 0.14.1, max UDMA/100
ata2.00: configured for MWDMA2
scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.14 PQ: 0 ANSI: 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 24 for MSI/MSI-X
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 25 for MSI/MSI-X
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:04.0: irq 27 for MSI/MSI-X
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:04.0: irq 28 for MSI/MSI-X
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:04.0: irq 29 for MSI/MSI-X
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:05.0: irq 30 for MSI/MSI-X
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:05.0: irq 31 for MSI/MSI-X
vda: vda1
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:06.0: irq 32 for MSI/MSI-X
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:06.0: irq 33 for MSI/MSI-X
vdb: unknown partition table
EXT4-fs (vda1): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/vda1
dracut: Loading SELinux policy
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1323893095.862:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy: No such file or directory
dracut: Switching root
udev: starting version 147
sr 1:0:0:0: Attached scsi generic sg0 type 5
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (7980 buckets, 31920 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
vdb: unknown partition table
vdb: vdb1
EXT4-fs (vdb1): mounted filesystem with ordered data mode
eth0: no IPv6 routers present
eth1: no IPv6 routers present