dmesg - TC1000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-12-generic (buildd@vernadsky) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002e7f0000 (usable)
[ 0.000000] BIOS-e820: 000000002e7f0000 - 000000002e7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002e7ff000 - 000000002e800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002e800000 - 000000002e900000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: Compaq Compaq Tablet PC TC1000 /0828, BIOS 4.06CJ15 10/06/2003
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x2e7f0 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c0097000] 97000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000002e7f0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 002e400000 page 2M
[ 0.000000] 002e400000 - 002e7f0000 page 4k
[ 0.000000] kernel direct mapping tables up to 2e7f0000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 2d181000 - 2de7f000
[ 0.000000] ACPI: RSDP 000f76d0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 2e7fbc01 00028 (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 2e7fbc29 00074 (v01 Compaq 00B5 06040000 PTL 01000000)
[ 0.000000] ACPI: DSDT 2e7fbc9d 03363 (v01 COMPAQ 00B5 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 2e7fffc0 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 743MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2e7f0000
[ 0.000000] low ram: 0 - 2e7f0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002e7f0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0002e7f0
[ 0.000000] On node 0 totalpages: 190331
[ 0.000000] free_area_init_node: node 0, pgdat c17b11c0, node_mem_map ee21f200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 1456 pages used for memmap
[ 0.000000] Normal zone: 184896 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 2e900000 (gap: 2e900000:d1680000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ecc00000 s26240 r0 d22912 u4194304
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 188843
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 3046912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 728684k/761792k available (5329k kernel code, 32640k reserved, 2589k data, 696k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xeeff0000 - 0xff7fe000 ( 264 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xee7f0000 ( 743 MB)
[ 0.000000] .init : 0xc17bc000 - 0xc186a000 ( 696 kB)
[ 0.000000] .data : 0xc1534784 - 0xc17bbd80 (2589 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1534784 (5329 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=ec806000 soft=ec808000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches PMTIMER. 2 loops
[ 0.000000] Detected 995.478 MHz processor.
[ 0.016046] Calibrating delay loop (skipped), value calculated using timer frequency.. 1990.95 BogoMIPS (lpj=3981912)
[ 0.016094] pid_max: default: 32768 minimum: 301
[ 0.018416] Security Framework initialized
[ 0.020736] AppArmor: AppArmor initialized
[ 0.020771] Yama: becoming mindful.
[ 0.039573] Mount-cache hash table entries: 512
[ 0.058806] Initializing cgroup subsys cpuacct
[ 0.058884] Initializing cgroup subsys memory
[ 0.070319] Initializing cgroup subsys devices
[ 0.070362] Initializing cgroup subsys freezer
[ 0.070379] Initializing cgroup subsys net_cls
[ 0.070396] Initializing cgroup subsys blkio
[ 0.070472] Initializing cgroup subsys perf_event
[ 0.077043] CPU: Processor revision 1.4.1.0, 1000 MHz
[ 0.077073] CPU: Code Morphing Software revision 4.4.0-10-156
[ 0.077091] CPU: 20030501 16:35 official release 62.0.1-4.4.0#1
[ 0.077768] SMP alternatives: switching to UP code
[ 0.139303] Freeing SMP alternatives: 24k freed
[ 0.141024] ACPI: Core revision 20110413
[ 0.223564] ACPI: setting ELCR to 0400 (from 0e00)
[ 0.224925] ftrace: allocating 24885 entries in 49 pages
[ 0.250684] weird, boot CPU (#0) not listed by the BIOS.
[ 0.252627] SMP motherboard not detected.
[ 0.253969] Local APIC not detected. Using dummy APIC emulation.
[ 0.254574] SMP disabled
[ 0.254670] Performance Events:
[ 0.314316] Brought up 1 CPUs
[ 0.315367] Total of 1 processors activated (1990.95 BogoMIPS).
[ 0.338524] devtmpfs: initialized
[ 0.358452] PM: Registering ACPI NVS region at 2e7ff000 (4096 bytes)
[ 0.382268] print_constraints: dummy:
[ 0.383049] Time: 13:58:05 Date: 12/09/11
[ 0.387586] NET: Registered protocol family 16
[ 0.403245] EISA bus registered
[ 0.404197] ACPI: bus type pci registered
[ 0.417627] PCI: PCI BIOS revision 2.10 entry at 0xfd80c, last bus=0
[ 0.417807] PCI: Using configuration type 1 for base access
[ 0.444926] bio: create slab at 0
[ 0.460508] ACPI: EC: Look up EC in DSDT
[ 0.573082] ACPI: Interpreter enabled
[ 0.573315] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.574025] ACPI: Using PIC for interrupt routing
[ 0.660333] ACPI: Power Resource [LRP0] (off)
[ 0.660847] ACPI: Power Resource [LRP1] (off)
[ 0.661650] ACPI: Power Resource [LRP2] (off)
[ 0.667393] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
[ 0.669605] ACPI: No dock devices found.
[ 0.669733] HEST: Table not found.
[ 0.669786] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.695250] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00])
[ 0.704558] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.704843] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.704918] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.705467] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.705525] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.705575] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.705924] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.706694] pci_root PNP0A03:00: host bridge window [mem 0x2e8e0000-0xffdfffff] (ignored)
[ 0.706739] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.706870] pci 0000:00:00.0: [1279:0395] type 0 class 0x000600
[ 0.707173] pci 0000:00:00.0: reg 10: [mem 0xe8100000-0xe81fffff]
[ 0.708605] pci 0000:00:00.1: [1279:0396] type 0 class 0x000500
[ 0.710201] pci 0000:00:00.2: [1279:0397] type 0 class 0x000500
[ 0.712236] pci 0000:00:05.0: [10de:0112] type 0 class 0x000300
[ 0.713254] pci 0000:00:05.0: reg 10: [mem 0xe9000000-0xe9ffffff]
[ 0.713413] pci 0000:00:05.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[ 0.713490] pci 0000:00:05.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.714592] pci 0000:00:07.0: [1106:0686] type 0 class 0x000601
[ 0.715364] pci 0000:00:07.1: [1106:0571] type 0 class 0x000101
[ 0.716044] pci 0000:00:07.1: reg 20: [io 0x1040-0x104f]
[ 0.717029] pci 0000:00:07.4: [1106:3057] type 0 class 0x000601
[ 0.717581] pci 0000:00:07.4: quirk: [io 0x6800-0x687f] claimed by vt82c686 HW-mon
[ 0.717633] pci 0000:00:07.4: quirk: [io 0x8100-0x810f] claimed by vt82c686 SMB
[ 0.717910] pci 0000:00:07.5: [1106:3058] type 0 class 0x000401
[ 0.718209] pci 0000:00:07.5: reg 10: [io 0x1400-0x14ff]
[ 0.718241] pci 0000:00:07.5: reg 14: [io 0x1054-0x1057]
[ 0.718267] pci 0000:00:07.5: reg 18: [io 0x1050-0x1053]
[ 0.718499] pci 0000:00:07.6: [1106:3068] type 0 class 0x000780
[ 0.718549] pci 0000:00:07.6: reg 10: [io 0x1800-0x18ff]
[ 0.718794] pci 0000:00:08.0: [8086:1059] type 0 class 0x000200
[ 0.718977] pci 0000:00:08.0: reg 10: [mem 0xe8020000-0xe8020fff]
[ 0.719009] pci 0000:00:08.0: reg 14: [io 0x1000-0x103f]
[ 0.719035] pci 0000:00:08.0: reg 18: [mem 0xe8000000-0xe801ffff]
[ 0.719083] pci 0000:00:08.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.719231] pci 0000:00:08.0: supports D1 D2
[ 0.719250] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot
[ 0.719275] pci 0000:00:08.0: PME# disabled
[ 0.719611] pci 0000:00:0a.0: [1114:0506] type 0 class 0x000200
[ 0.719677] pci 0000:00:0a.0: reg 10: [mem 0xe8030000-0xe803ffff]
[ 0.719707] pci 0000:00:0a.0: reg 14: [io 0x1c00-0x1cff]
[ 0.720180] pci 0000:00:0a.0: supports D1 D2
[ 0.720198] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot
[ 0.720219] pci 0000:00:0a.0: PME# disabled
[ 0.720282] pci 0000:00:0b.0: [104c:ac55] type 2 class 0x000607
[ 0.720866] pci 0000:00:0b.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.720945] pci 0000:00:0b.0: supports D1 D2
[ 0.720959] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.720980] pci 0000:00:0b.0: PME# disabled
[ 0.721256] pci 0000:00:0b.1: [104c:ac55] type 2 class 0x000607
[ 0.721309] pci 0000:00:0b.1: reg 10: [mem 0x00000000-0x00000fff]
[ 0.721370] pci 0000:00:0b.1: supports D1 D2
[ 0.721383] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.721404] pci 0000:00:0b.1: PME# disabled
[ 0.721816] pci 0000:00:0c.0: [1033:0035] type 0 class 0x000c03
[ 0.721864] pci 0000:00:0c.0: reg 10: [mem 0xe8022000-0xe8022fff]
[ 0.722206] pci 0000:00:0c.0: supports D1 D2
[ 0.722223] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.722246] pci 0000:00:0c.0: PME# disabled
[ 0.723550] pci 0000:00:0c.1: [1033:0035] type 0 class 0x000c03
[ 0.724518] pci 0000:00:0c.1: reg 10: [mem 0xe8023000-0xe8023fff]
[ 0.726846] pci 0000:00:0c.1: supports D1 D2
[ 0.726870] pci 0000:00:0c.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.726896] pci 0000:00:0c.1: PME# disabled
[ 0.728399] pci 0000:00:0c.2: [1033:00e0] type 0 class 0x000c03
[ 0.728557] pci 0000:00:0c.2: reg 10: [mem 0xe8021000-0xe80210ff]
[ 0.728663] pci 0000:00:0c.2: supports D1 D2
[ 0.728677] pci 0000:00:0c.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.728700] pci 0000:00:0c.2: PME# disabled
[ 0.729955] pci_bus 0000:00: on NUMA node 0
[ 0.730131] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.734163] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.755068] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[ 0.755695] ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
[ 0.757899] ACPI: PCI Interrupt Link [LNKC] (IRQs 7) *10
[ 0.759212] ACPI: PCI Interrupt Link [LNKD] (IRQs 15) *0, disabled.
[ 0.761425] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.764401] vgaarb: loaded
[ 0.764423] vgaarb: bridge control possible 0000:00:05.0
[ 0.772308] SCSI subsystem initialized
[ 0.774441] libata version 3.00 loaded.
[ 0.775337] usbcore: registered new interface driver usbfs
[ 0.775438] usbcore: registered new interface driver hub
[ 0.780755] usbcore: registered new device driver usb
[ 0.783675] PCI: Using ACPI for IRQ routing
[ 0.783718] PCI: pci_cache_line_size set to 32 bytes
[ 0.786727] reserve RAM buffer: 000000000009b800 - 000000000009ffff
[ 0.786774] reserve RAM buffer: 000000002e7f0000 - 000000002fffffff
[ 0.791696] NetLabel: Initializing
[ 0.791729] NetLabel: domain hash size = 128
[ 0.791738] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.794014] NetLabel: unlabeled traffic allowed by default
[ 0.797961] Switching to clocksource pit
[ 0.856238] AppArmor: AppArmor Filesystem Enabled
[ 0.856817] pnp: PnP ACPI init
[ 0.857080] ACPI: bus type pnp registered
[ 0.861846] pnp 00:00: [bus 00-ff]
[ 0.862010] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.862050] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.862077] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.862103] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.862127] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.862152] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.862176] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.862200] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.862224] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.862248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.862272] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.862296] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.862319] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.862845] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.863545] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.863851] pnp 00:00: [mem 0x2e8e0000-0xffdfffff window]
[ 0.863888] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.866162] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.867368] pnp 00:01: [io 0x0000-0x000f]
[ 0.867398] pnp 00:01: [io 0x0081-0x008f]
[ 0.867416] pnp 00:01: [io 0x00c0-0x00df]
[ 0.867440] pnp 00:01: [dma 4]
[ 0.867657] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.868616] pnp 00:02: [io 0x0070-0x0075]
[ 0.868667] pnp 00:02: [irq 8]
[ 0.869163] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.869337] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.869465] pnp 00:03: [irq 13]
[ 0.869644] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.870060] pnp 00:04: [io 0x0061]
[ 0.870276] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.870753] pnp 00:05: [io 0x0080]
[ 0.870778] pnp 00:05: [io 0x0022]
[ 0.870795] pnp 00:05: [io 0x00b1]
[ 0.870814] pnp 00:05: [io 0x00a8-0x00a9]
[ 0.870831] pnp 00:05: [io 0x0092]
[ 0.871518] pnp 00:05: [io 0x3810-0x381f]
[ 0.871683] pnp 00:05: [io 0x04d0-0x04d1]
[ 0.871698] pnp 00:05: [io 0x04d6]
[ 0.871914] pnp 00:05: [io 0x0480-0x048f]
[ 0.871930] pnp 00:05: [io 0x040b]
[ 0.872109] pnp 00:05: [mem 0xfffc0000-0xffffffff]
[ 0.874092] system 00:05: [io 0x3810-0x381f] has been reserved
[ 0.874125] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.874151] system 00:05: [io 0x04d6] has been reserved
[ 0.874175] system 00:05: [io 0x0480-0x048f] has been reserved
[ 0.874198] system 00:05: [io 0x040b] has been reserved
[ 0.874230] system 00:05: [mem 0xfffc0000-0xffffffff] has been reserved
[ 0.874271] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.877104] pnp 00:06: Plug and Play ACPI device, IDs FPI2002 (disabled)
[ 0.878406] pnp 00:07: [io 0x8000-0x807f]
[ 0.878425] pnp 00:07: [io 0x6800-0x687f]
[ 0.879298] system 00:07: [io 0x8000-0x807f] has been reserved
[ 0.879338] system 00:07: [io 0x6800-0x687f] has been reserved
[ 0.879380] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.879789] pnp: PnP ACPI: found 8 devices
[ 0.879810] ACPI: ACPI bus type pnp unregistered
[ 0.879832] PnPBIOS: Disabled by ACPI PNP
[ 0.957414] Switching to clocksource acpi_pm
[ 0.958120] Switched to NOHz mode on CPU #0
[ 0.958292] PCI: max bus depth: 1 pci_try_num: 2
[ 0.959864] pci 0000:00:0b.0: BAR 15: assigned [mem 0x30000000-0x33ffffff pref]
[ 0.961257] pci 0000:00:0b.0: BAR 16: assigned [mem 0x34000000-0x37ffffff]
[ 0.961450] pci 0000:00:0b.1: BAR 15: assigned [mem 0x38000000-0x3bffffff pref]
[ 0.961637] pci 0000:00:0b.1: BAR 16: assigned [mem 0x3c000000-0x3fffffff]
[ 0.961855] pci 0000:00:05.0: BAR 6: assigned [mem 0x40000000-0x4000ffff pref]
[ 0.961909] pci 0000:00:08.0: BAR 6: assigned [mem 0x40010000-0x4001ffff pref]
[ 0.961950] pci 0000:00:0b.0: BAR 0: assigned [mem 0x40020000-0x40020fff]
[ 0.961992] pci 0000:00:0b.0: BAR 0: set to [mem 0x40020000-0x40020fff] (PCI address [0x40020000-0x40020fff])
[ 0.962033] pci 0000:00:0b.1: BAR 0: assigned [mem 0x40021000-0x40021fff]
[ 0.962057] pci 0000:00:0b.1: BAR 0: set to [mem 0x40021000-0x40021fff] (PCI address [0x40021000-0x40021fff])
[ 0.962192] pci 0000:00:0b.0: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.962453] pci 0000:00:0b.0: BAR 14: assigned [io 0x2400-0x24ff]
[ 0.962491] pci 0000:00:0b.1: BAR 13: assigned [io 0x2800-0x28ff]
[ 0.962525] pci 0000:00:0b.1: BAR 14: assigned [io 0x2c00-0x2cff]
[ 0.962566] pci 0000:00:0b.0: CardBus bridge to [bus 01-04]
[ 0.962578] pci 0000:00:0b.0: bridge window [io 0x2000-0x20ff]
[ 0.962596] pci 0000:00:0b.0: bridge window [io 0x2400-0x24ff]
[ 0.962616] pci 0000:00:0b.0: bridge window [mem 0x30000000-0x33ffffff pref]
[ 0.962633] pci 0000:00:0b.0: bridge window [mem 0x34000000-0x37ffffff]
[ 0.962656] pci 0000:00:0b.1: CardBus bridge to [bus 05-08]
[ 0.962667] pci 0000:00:0b.1: bridge window [io 0x2800-0x28ff]
[ 0.962776] pci 0000:00:0b.1: bridge window [io 0x2c00-0x2cff]
[ 0.962800] pci 0000:00:0b.1: bridge window [mem 0x38000000-0x3bffffff pref]
[ 0.962818] pci 0000:00:0b.1: bridge window [mem 0x3c000000-0x3fffffff]
[ 0.965004] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 0.965037] PCI: setting IRQ 9 as level-triggered
[ 0.965074] pci 0000:00:0b.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 0.965116] pci 0000:00:0b.0: setting latency timer to 64
[ 0.967727] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.967761] PCI: setting IRQ 11 as level-triggered
[ 0.967796] pci 0000:00:0b.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.967834] pci 0000:00:0b.1: setting latency timer to 64
[ 0.967961] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.967980] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.968324] pci_bus 0000:01: resource 0 [io 0x2000-0x20ff]
[ 0.968346] pci_bus 0000:01: resource 1 [io 0x2400-0x24ff]
[ 0.968365] pci_bus 0000:01: resource 2 [mem 0x30000000-0x33ffffff pref]
[ 0.968379] pci_bus 0000:01: resource 3 [mem 0x34000000-0x37ffffff]
[ 0.968395] pci_bus 0000:05: resource 0 [io 0x2800-0x28ff]
[ 0.968408] pci_bus 0000:05: resource 1 [io 0x2c00-0x2cff]
[ 0.968423] pci_bus 0000:05: resource 2 [mem 0x38000000-0x3bffffff pref]
[ 0.968436] pci_bus 0000:05: resource 3 [mem 0x3c000000-0x3fffffff]
[ 0.970533] NET: Registered protocol family 2
[ 0.972505] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.977174] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.981978] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.983913] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.983968] TCP reno registered
[ 0.985070] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.985749] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.987409] NET: Registered protocol family 1
[ 0.987614] pci 0000:00:05.0: Boot video device
[ 0.987648] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 0.989208] pci 0000:00:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.991439] PCI: CLS 32 bytes, default 32
[ 1.006246] audit: initializing netlink socket (disabled)
[ 1.006434] type=2000 audit(1323439085.001:1): initialized
[ 1.089576] Trying to unpack rootfs image as initramfs...
[ 1.198135] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.271560] VFS: Disk quotas dquot_6.5.2
[ 1.272212] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.289381] fuse init (API version 7.16)
[ 1.290151] msgmni has been set to 1423
[ 1.337558] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.350476] io scheduler noop registered
[ 1.350514] io scheduler deadline registered
[ 1.350694] io scheduler cfq registered (default)
[ 1.353999] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.354354] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.356743] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.364998] ACPI: AC Adapter [AC] (on-line)
[ 1.368315] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.368646] ACPI: Power Button [PWRB]
[ 1.370189] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.370270] ACPI: Power Button [PWRF]
[ 1.371337] ACPI: Fan [FAN0] (off)
[ 1.371934] ACPI: Fan [FAN1] (off)
[ 1.372396] ACPI: Fan [FAN2] (off)
[ 1.372616] ACPI: acpi_idle registered with cpuidle
[ 1.373140] Marking TSC unstable due to TSC halts in idle
[ 1.398137] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.398168] ACPI: Thermal Zone [THRM] (60 C)
[ 1.398392] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.400938] ERST: Table is not found!
[ 1.416449] isapnp: Scanning for PnP cards...
[ 1.515492] serial 00:06: [io 0x03f8-0x03ff]
[ 1.516468] ACPI: Battery Slot [CMB0] (battery present)
[ 1.516859] serial 00:06: [irq 4]
[ 1.537512] serial 00:06: activated
[ 1.560787] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.586470] Linux agpgart interface v0.103
[ 1.683548] brd: module loaded
[ 1.691589] loop: module loaded
[ 1.699039] pata_acpi 0000:00:07.1: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 1.699084] pata_acpi 0000:00:07.1: VIA VLink IRQ fixup, from 0 to 9
[ 1.705571] pata_acpi 0000:00:07.1: PCI INT A disabled
[ 1.714285] Fixed MDIO Bus: probed
[ 1.714999] PPP generic driver version 2.4.2
[ 1.715443] tun: Universal TUN/TAP device driver, 1.6
[ 1.715459] tun: (C) 1999-2004 Max Krasnyansky
[ 1.764844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.766108] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
[ 1.766141] PCI: setting IRQ 7 as level-triggered
[ 1.766177] ehci_hcd 0000:00:0c.2: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 1.766433] ehci_hcd 0000:00:0c.2: EHCI Host Controller
[ 1.766836] ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1
[ 1.788553] ehci_hcd 0000:00:0c.2: irq 7, io mem 0xe8021000
[ 1.801145] ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 0.95
[ 1.809699] hub 1-0:1.0: USB hub found
[ 1.809836] hub 1-0:1.0: 5 ports detected
[ 1.822381] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.822625] ohci_hcd 0000:00:0c.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 1.823093] ohci_hcd 0000:00:0c.0: OHCI Host Controller
[ 1.823783] ohci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2
[ 1.872699] ohci_hcd 0000:00:0c.0: irq 9, io mem 0xe8022000
[ 2.546870] hub 2-0:1.0: USB hub found
[ 2.547333] hub 2-0:1.0: 3 ports detected
[ 2.547991] ohci_hcd 0000:00:0c.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 2.552581] ohci_hcd 0000:00:0c.1: OHCI Host Controller
[ 2.553068] ohci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 3
[ 2.553281] ohci_hcd 0000:00:0c.1: irq 11, io mem 0xe8023000
[ 3.325724] hub 3-0:1.0: USB hub found
[ 3.325803] hub 3-0:1.0: 2 ports detected
[ 3.326914] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.327880] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.339116] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.339225] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.345539] mousedev: PS/2 mouse device common for all mice
[ 3.346537] rtc_cmos 00:02: RTC can wake from S4
[ 3.348359] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.348508] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 3.349337] device-mapper: uevent: version 1.0.3
[ 3.350329] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 3.350563] EISA: Probing bus 0 at eisa.0
[ 3.350624] Cannot allocate resource for EISA slot 1
[ 3.350643] Cannot allocate resource for EISA slot 2
[ 3.350672] Cannot allocate resource for EISA slot 3
[ 3.351431] Cannot allocate resource for EISA slot 6
[ 3.351769] Cannot allocate resource for EISA slot 8
[ 3.351784] EISA: Detected 0 cards.
[ 3.356873] cpufreq-nforce2: No nForce2 chipset.
[ 3.357045] cpuidle: using governor ladder
[ 3.357994] cpuidle: using governor menu
[ 3.358018] EFI Variables Facility v0.08 2004-May-17
[ 3.365839] TCP cubic registered
[ 3.367796] NET: Registered protocol family 10
[ 3.374027] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 3.384324] NET: Registered protocol family 17
[ 3.388654] Registering the dns_resolver key type
[ 3.388956] Using IPI No-Shortcut mode
[ 3.390501] PM: Hibernation image not present or could not be loaded.
[ 3.390660] registered taskstats version 1
[ 3.520766] usb 1-5: new high speed USB device number 3 using ehci_hcd
[ 3.676666] hub 1-5:1.0: USB hub found
[ 3.677516] hub 1-5:1.0: 4 ports detected
[ 3.740290] isapnp: No Plug & Play device found
[ 3.916899] usb 2-2: new low speed USB device number 2 using ohci_hcd
[ 3.965599] Freeing initrd memory: 13304k freed
[ 4.253362] usb 1-5.1: new high speed USB device number 4 using ehci_hcd
[ 4.399526] Magic number: 7:533:988
[ 4.401023] rtc_cmos 00:02: setting system clock to 2011-12-09 13:58:09 UTC (1323439089)
[ 4.401484] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.401506] EDD information not available.
[ 4.406440] Freeing unused kernel memory: 696k freed
[ 4.410710] Write protecting the kernel text: 5332k
[ 4.411088] Write protecting the kernel read-only data: 2188k
[ 4.484920] usb 1-5.2: new full speed USB device number 5 using ehci_hcd
[ 4.704732] usb 1-5.3: new low speed USB device number 6 using ehci_hcd
[ 4.912999] usb 1-5.4: new low speed USB device number 7 using ehci_hcd
[ 5.103830] udevd[79]: starting version 173
[ 7.562900] pata_via 0000:00:07.1: version 0.3.4
[ 7.563090] pata_via 0000:00:07.1: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 7.563126] pata_via 0000:00:07.1: VIA VLink IRQ fixup, from 0 to 9
[ 7.653900] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 7.653931] e100: Copyright(c) 1999-2006 Intel Corporation
[ 7.684381] scsi0 : pata_via
[ 7.692759] scsi1 : pata_via
[ 7.694420] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1040 irq 14
[ 7.694455] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1048 irq 15
[ 7.713435] e100 0000:00:08.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 7.862391] ata1.00: ATA-5: HITACHI_DK23EA-30, 00K4A0A2, max UDMA/100
[ 7.862426] ata1.00: 58605120 sectors, multi 16: LBA
[ 7.862656] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 7.870115] ata1.00: configured for UDMA/33
[ 7.873463] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23EA-3 00K4 PQ: 0 ANSI: 5
[ 7.876912] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB)
[ 7.883295] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.885624] ata2: port disabled. ignoring.
[ 7.889433] sd 0:0:0:0: [sda] Write Protect is off
[ 7.889470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.894156] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.032411] sda: sda1 sda2 < sda5 >
[ 8.044714] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.335387] input: Jing-Mold USB K/B+Mouse as /devices/pci0000:00/0000:00:0c.0/usb2/2-2/2-2:1.0/input/input3
[ 8.346623] generic-usb 0003:05AF:080A.0001: input,hidraw0: USB HID v1.10 Keyboard [Jing-Mold USB K/B+Mouse] on usb-0000:00:0c.0-2/input0
[ 8.381984] usbcore: registered new interface driver uas
[ 8.402480] input: Jing-Mold USB K/B+Mouse as /devices/pci0000:00/0000:00:0c.0/usb2/2-2/2-2:1.1/input/input4
[ 8.403453] generic-usb 0003:05AF:080A.0002: input,hidraw1: USB HID v1.10 Mouse [Jing-Mold USB K/B+Mouse] on usb-0000:00:0c.0-2/input1
[ 8.424262] Initializing USB Mass Storage driver...
[ 8.434720] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0c.2/usb1/1-5/1-5.3/1-5.3:1.0/input/input5
[ 8.451983] generic-usb 0003:046D:C06A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0c.2-5.3/input0
[ 8.463902] scsi2 : usb-storage 1-5.1:1.0
[ 8.468756] usbcore: registered new interface driver usb-storage
[ 8.468781] USB Mass Storage support registered.
[ 8.474386] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:0c.2/usb1/1-5/1-5.4/1-5.4:1.0/input/input6
[ 8.482937] e100 0000:00:08.0: PME# disabled
[ 8.498100] generic-usb 0003:03F0:0024.0004: input,hidraw3: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:0c.2-5.4/input0
[ 8.498286] usbcore: registered new interface driver usbhid
[ 8.498299] usbhid: USB HID core driver
[ 8.514665] e100 0000:00:08.0: eth0: addr 0xe8020000, irq 9, MAC addr 00:08:02:92:1c:ae
[ 9.967798] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 29.611033] udevd[292]: starting version 173
[ 30.302350] Adding 759804k swap on /dev/sda5. Priority:-1 extents:1 across:759804k
[ 30.772758] lp: driver loaded but no devices found
[ 30.968556] usb 1-5.1: reset high speed USB device number 4 using ehci_hcd
[ 31.097369] scsi 2:0:0:0: CD-ROM slimtype eTDU108 1 SL06 PQ: 0 ANSI: 0
[ 31.185776] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda pop-up
[ 31.185825] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 31.186764] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 31.187322] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 31.818850] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 33.361592] parport_pc: VIA 686A/8231 detected
[ 33.361616] parport_pc: probing current configuration
[ 33.361663] parport_pc: Current parallel port base: 0x0
[ 33.361679] parport_pc: VIA parallel port disabled in BIOS
[ 33.438485] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input7
[ 33.484869] ACPI: Video Device [VIDO] (multi-head: yes rom: no post: no)
[ 33.796687] wmi: Mapper loaded
[ 36.224356] [drm] Initialized drm 1.1.0 20060810
[ 37.863960] atmel 0000:00:0a.0: enabling device (0010 -> 0013)
[ 38.070276] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
[ 38.070319] PCI: setting IRQ 15 as level-triggered
[ 38.070359] atmel 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 15 (level, low) -> IRQ 15
[ 39.134083] type=1400 audit(1323439124.230:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=540 comm="apparmor_parser"
[ 39.165803] type=1400 audit(1323439124.262:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=540 comm="apparmor_parser"
[ 39.193848] type=1400 audit(1323439124.290:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=540 comm="apparmor_parser"
[ 48.580939] Linux video capture interface: v2.00
[ 48.697747] gspca: v2.13.0 registered
[ 48.831127] input: sonixj as /devices/pci0000:00/0000:00:0c.2/usb1/1-5/1-5.2/input/input8
[ 48.887720] usbcore: registered new interface driver sonixj
[ 50.070662] ppdev: user-space parallel port driver
[ 50.243483] tc1100_wmi: HP Compaq TC1100 Tablet WMI Extras loaded
[ 50.313831] eth1: Atmel at76c50x. Version 0.98. MAC 00:08:02:d2:13:c3
[ 50.315289] yenta_cardbus 0000:00:0b.0: CardBus bridge found [0e11:00b5]
[ 50.315475] yenta_cardbus 0000:00:0b.0: Using CSCINT to route CSC interrupts to PCI
[ 50.315495] yenta_cardbus 0000:00:0b.0: Routing CardBus interrupts to PCI
[ 50.315521] yenta_cardbus 0000:00:0b.0: TI: mfunc 0x01001022, devctl 0x64
[ 50.540467] e100 0000:00:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 50.545111] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.546146] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 50.555593] yenta_cardbus 0000:00:0b.0: ISA IRQ mask 0x0068, PCI irq 9
[ 50.555625] yenta_cardbus 0000:00:0b.0: Socket status: 30000006
[ 50.589727] yenta_cardbus 0000:00:0b.1: CardBus bridge found [0e11:00b5]
[ 50.589839] yenta_cardbus 0000:00:0b.1: Using CSCINT to route CSC interrupts to PCI
[ 50.589855] yenta_cardbus 0000:00:0b.1: Routing CardBus interrupts to PCI
[ 50.590047] yenta_cardbus 0000:00:0b.1: TI: mfunc 0x01001022, devctl 0x64
[ 50.842317] yenta_cardbus 0000:00:0b.1: ISA IRQ mask 0x0068, PCI irq 11
[ 50.842345] yenta_cardbus 0000:00:0b.1: Socket status: 30000006
[ 50.902018] nouveau 0000:00:05.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 51.510668] [drm] nouveau 0000:00:05.0: Detected an NV10 generation card (0x011200b2)
[ 51.511714] [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PRAMIN
[ 51.587239] [drm] nouveau 0000:00:05.0: ... BIOS checksum invalid
[ 51.587271] [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PROM
[ 51.587355] [drm] nouveau 0000:00:05.0: ... BIOS signature not found
[ 51.587369] [drm] nouveau 0000:00:05.0: Attempting to load BIOS image from PCIROM
[ 51.589425] [drm] nouveau 0000:00:05.0: ... appears to be valid
[ 51.590632] [drm] nouveau 0000:00:05.0: BMP BIOS found
[ 51.590658] [drm] nouveau 0000:00:05.0: BMP version 5.20
[ 51.590684] [drm] nouveau 0000:00:05.0: Bios version 03.11.01.58
[ 51.590719] [drm] nouveau 0000:00:05.0: Found Display Configuration Block version 1.5
[ 51.590751] [drm] nouveau 0000:00:05.0: Raw DCB entry 0: f0003f00 000088b8
[ 51.590794] [drm] nouveau 0000:00:05.0: Raw DCB entry 1: f2045f14 00000000
[ 51.591829] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xB708
[ 51.592186] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xBE48
[ 51.592713] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xB723
[ 51.594561] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xB7AD
[ 51.594606] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xB911
[ 51.597256] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 5 at offset 0xB7D2
[ 52.404718] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 52.616555] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 6 at offset 0xBDEF
[ 52.616705] [drm] nouveau 0000:00:05.0: Parsing VBIOS init table 7 at offset 0xB8AC
[ 52.616937] [drm] nouveau 0000:00:05.0: BIOS FP mode: 1024x768 (65000kHz pixel clock)
[ 52.733112] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 52.796393] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 52.818956] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 53.080698] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
[ 53.109011] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
[ 53.199406] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff:
[ 53.217661] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 53.286273] clean.
[ 53.297667] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 53.359350] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7:
[ 53.397912] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff clean.
[ 53.465159] 0xe4000-0xfffff
[ 53.501013] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe4000-0xfffff
[ 53.503957] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[ 53.556261] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 53.558485] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 53.559510] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 53.590899] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 53.639899] clean.
[ 53.736275] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 54.805994] type=1400 audit(1323439139.901:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=857 comm="apparmor_parser"
[ 54.950994] eth1: Generic_irq received.
[ 55.029027] type=1400 audit(1323439140.125:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=860 comm="apparmor_parser"
[ 55.048649] type=1400 audit(1323439140.145:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=860 comm="apparmor_parser"
[ 55.053316] type=1400 audit(1323439140.149:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=860 comm="apparmor_parser"
[ 55.323888] type=1400 audit(1323439140.417:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=862 comm="apparmor_parser"
[ 55.396454] eth1: Generic_irq received.
[ 55.465076] type=1400 audit(1323439140.561:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=862 comm="apparmor_parser"
[ 55.523213] type=1400 audit(1323439140.617:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=862 comm="apparmor_parser"
[ 55.632362] [drm] nouveau 0000:00:05.0: 0 available performance level(s)
[ 55.632512] [drm] nouveau 0000:00:05.0: c: memory 332MHz core 15MHz
[ 55.639339] eth1: Generic_irq received.
[ 55.652355] [TTM] Zone kernel: Available graphics memory: 371354 kiB.
[ 55.652379] [TTM] Initializing pool allocator.
[ 55.652708] [drm] nouveau 0000:00:05.0: Detected 16MiB VRAM
[ 55.655296] [drm] nouveau 0000:00:05.0: 64 MiB GART (aperture)
[ 55.713738] type=1400 audit(1323439140.809:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=869 comm="apparmor_parser"
[ 55.718846] type=1400 audit(1323439140.813:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=869 comm="apparmor_parser"
[ 55.796189] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 55.796218] [drm] No driver support for vblank timestamp query.
[ 55.842899] type=1400 audit(1323439140.937:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=872 comm="apparmor_parser"
[ 55.850547] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0)
[ 55.850590] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 1)
[ 55.850622] [drm] nouveau 0000:00:05.0: Calling LVDS script 1:
[ 55.850658] [drm] nouveau 0000:00:05.0: Calling LVDS script 6:
[ 55.850682] [drm] nouveau 0000:00:05.0: 0xC1A9: Parsing digital output script table
[ 56.403982] eth1: Generic_irq received.
[ 56.588233] eth1: Generic_irq received.
[ 56.795117] [drm] nouveau 0000:00:05.0: allocated 1024x768 fb: 0x48000, bo edc76c00
[ 56.800835] fbcon: nouveaufb (fb0) is primary device
[ 56.823558] Console: switching to colour frame buffer device 128x48
[ 56.825967] fb0: nouveaufb frame buffer device
[ 56.825986] drm: registered panic notifier
[ 56.836361] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:05.0 on minor 0
[ 56.837109] VIA 82xx Modem 0000:00:07.6: enabling device (0000 -> 0001)
[ 56.837199] VIA 82xx Modem 0000:00:07.6: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 56.837250] VIA 82xx Modem 0000:00:07.6: VIA VLink IRQ fixup, from 255 to 7
[ 56.850828] eth1: Generic_irq received.
[ 56.853794] VIA 82xx Modem 0000:00:07.6: setting latency timer to 64
[ 57.397087] VIA 82xx Audio 0000:00:07.5: enabling device (0000 -> 0001)
[ 57.397187] VIA 82xx Audio 0000:00:07.5: PCI INT C -> Link[LNKC] -> GSI 7 (level, low) -> IRQ 7
[ 57.397227] VIA 82xx Audio 0000:00:07.5: VIA VLink IRQ fixup, from 255 to 7
[ 57.397551] VIA 82xx Audio 0000:00:07.5: setting latency timer to 64
[ 57.940857] codec_read: codec 0 is not valid [0x87e5372]
[ 57.982847] codec_read: codec 0 is not valid [0x87e5372]
[ 58.042544] codec_read: codec 0 is not valid [0x87e5372]
[ 58.094743] codec_read: codec 0 is not valid [0x87e5372]
[ 59.777674] init: failsafe main process (767) killed by TERM signal
[ 59.881180] init: apport pre-start process (919) terminated with status 1
[ 60.946755] init: apport post-stop process (945) terminated with status 1
[ 60.960261] eth0: no IPv6 routers present
[ 61.690902] usb 1-5.3: USB disconnect, device number 6
[ 63.185109] usb 1-5.3: new low speed USB device number 8 using ehci_hcd
[ 63.311977] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:0c.2/usb1/1-5/1-5.3/1-5.3:1.0/input/input9
[ 63.337291] generic-usb 0003:046D:C06A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0c.2-5.3/input0
[ 63.372630] audit_printk_skb: 6 callbacks suppressed
[ 63.372675] type=1400 audit(1323439148.469:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=979 comm="apparmor_parser"
[ 63.412006] type=1400 audit(1323439148.505:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=979 comm="apparmor_parser"
[ 69.245307] Bluetooth: Core ver 2.16
[ 69.245651] NET: Registered protocol family 31
[ 69.245665] Bluetooth: HCI device and connection manager initialized
[ 69.245710] Bluetooth: HCI socket layer initialized
[ 69.245730] Bluetooth: L2CAP socket layer initialized
[ 69.256645] Bluetooth: SCO socket layer initialized
[ 69.316425] Bluetooth: RFCOMM TTY layer initialized
[ 69.316486] Bluetooth: RFCOMM socket layer initialized
[ 69.316498] Bluetooth: RFCOMM ver 1.11
[ 69.867565] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 69.867595] Bluetooth: BNEP filters: protocol multicast
[ 70.601516] [drm] nouveau 0000:00:05.0: Calling LVDS script 2:
[ 70.601566] [drm] nouveau 0000:00:05.0: 0xC238: Parsing digital output script table
[ 70.618203] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 1)
[ 70.618231] [drm] nouveau 0000:00:05.0: Calling LVDS script 5:
[ 70.618252] [drm] nouveau 0000:00:05.0: 0xC132: Parsing digital output script table
[ 70.851662] [drm] nouveau 0000:00:05.0: Output LVDS-1 is running on CRTC 1 using output B
[ 74.004819] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 74.598852] eth1: Generic_irq received.
[ 75.344188] init: plymouth-stop pre-start process (1191) terminated with status 1
[ 95.592637] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 96.191006] unity_support_t[1360]: segfault at 2c ip 008cf5ee sp bffff6c0 error 4 in libdrm_nouveau.so.1.0.0[8cc000+5000]
[ 96.514902] eth1: Generic_irq received.
[ 192.077031] unity_support_t[1480]: segfault at 2c ip 008cf5ee sp bffff720 error 4 in libdrm_nouveau.so.1.0.0[8cc000+5000]
[ 197.462071] unity_support_t[1526]: segfault at 2c ip 008cf5ee sp bffff460 error 4 in libdrm_nouveau.so.1.0.0[8cc000+5000]
[ 1609.055219] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 1)
[ 1609.058091] [drm] nouveau 0000:00:05.0: Calling LVDS script 6:
[ 1609.058361] [drm] nouveau 0000:00:05.0: 0xC1A9: Parsing digital output script table
[ 1974.541874] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 1)
[ 1974.542030] [drm] nouveau 0000:00:05.0: Calling LVDS script 2:
[ 1974.542151] [drm] nouveau 0000:00:05.0: 0xC238: Parsing digital output script table
[ 1974.567120] [drm] nouveau 0000:00:05.0: Calling LVDS script 5:
[ 1974.567405] [drm] nouveau 0000:00:05.0: 0xC132: Parsing digital output script table
[ 4241.094434] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 1)
[ 4241.095373] [drm] nouveau 0000:00:05.0: Calling LVDS script 6:
[ 4241.095461] [drm] nouveau 0000:00:05.0: 0xC1A9: Parsing digital output script table
[ 4268.156372] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 1)
[ 4268.156472] [drm] nouveau 0000:00:05.0: Calling LVDS script 2:
[ 4268.156544] [drm] nouveau 0000:00:05.0: 0xC238: Parsing digital output script table
[ 4268.174397] [drm] nouveau 0000:00:05.0: Calling LVDS script 5:
[ 4268.176304] [drm] nouveau 0000:00:05.0: 0xC132: Parsing digital output script table
[ 5768.051701] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 1)
[ 5768.054154] [drm] nouveau 0000:00:05.0: Calling LVDS script 6:
[ 5768.054389] [drm] nouveau 0000:00:05.0: 0xC1A9: Parsing digital output script table
[ 6045.152948] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 1)
[ 6045.153104] [drm] nouveau 0000:00:05.0: Calling LVDS script 2:
[ 6045.153227] [drm] nouveau 0000:00:05.0: 0xC238: Parsing digital output script table
[ 6045.178472] [drm] nouveau 0000:00:05.0: Calling LVDS script 5:
[ 6045.178746] [drm] nouveau 0000:00:05.0: 0xC132: Parsing digital output script table
[ 6157.334727] [drm] nouveau 0000:00:05.0: Setting dpms mode 3 on lvds encoder (output 1)
[ 6157.336523] [drm] nouveau 0000:00:05.0: Calling LVDS script 6:
[ 6157.336656] [drm] nouveau 0000:00:05.0: 0xC1A9: Parsing digital output script table
[ 6217.948448] [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on lvds encoder (output 1)
[ 6217.948576] [drm] nouveau 0000:00:05.0: Calling LVDS script 2:
[ 6217.948674] [drm] nouveau 0000:00:05.0: 0xC238: Parsing digital output script table
[ 6217.967088] [drm] nouveau 0000:00:05.0: Calling LVDS script 5:
[ 6217.967327] [drm] nouveau 0000:00:05.0: 0xC132: Parsing digital output script table