dmesg - Antares
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-38) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 03:59:20 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/antares-root ro console=tty=00 console=ttyS0,115200n8 quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf699000 (usable)
[ 0.000000] BIOS-e820: 00000000bf699000 - 00000000bf6af000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf6af000 - 00000000bf6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf6ce000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 00000000fec90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec94000 - 00000000fecd0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecd4000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000640000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x640000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EBFFF uncachable
[ 0.000000] EC000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 000100000000 mask FFFF00000000 write-back
[ 0.000000] 3 base 000200000000 mask FFFE00000000 write-back
[ 0.000000] 4 base 000400000000 mask FFFE00000000 write-back
[ 0.000000] 5 base 000600000000 mask FFFFC0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000640000000 aka 25600M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf699 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf699000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf699000 page 4k
[ 0.000000] kernel direct mapping tables up to bf699000 @ 8000-b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000640000000
[ 0.000000] 0100000000 - 0640000000 page 1G
[ 0.000000] kernel direct mapping tables up to 640000000 @ a000-b000
[ 0.000000] RAMDISK: 37627000 - 37fef5ae
[ 0.000000] ACPI: RSDP 00000000000f11e0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f1268 000A4 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000bf6bbcf4 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 16, using default 8 (20090903/tbfadt-607)
[ 0.000000] ACPI: DSDT 00000000bf6af000 06682 (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000bf6be000 00040
[ 0.000000] ACPI: APIC 00000000bf6bb478 00254 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000bf6bb6dc 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000bf6bb730 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000bf6bb76c 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000bf6bb7ac 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000bf6bb8e4 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000bf6b5804 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000bf6b5a74 00354 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000bf6b5684 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000bf6b56b4 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: IV__ 00000000bf6bba68 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000bf6bba9c 00190 (v02 AMD F10 00000001 AMD 00000001)
[ 0.000000] ACPI: SLIT 00000000bf6bbc58 00030 (v01 AMD F10 00000001 AMD 00000001)
[ 0.000000] ACPI: SS__ 00000000bf6bf000 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000bf6bbc8c 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 8 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 9 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 10 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 11 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 12 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 13 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 17 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 19 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 21 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-c0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-340000000
[ 0.000000] SRAT: Node 1 PXM 1 340000000-640000000
[ 0.000000] NUMA: Allocated memnodemap from a000 - 16840
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000340000000
[ 0.000000] NODE_DATA [0000000000016840 - 000000000001e83f]
[ 0.000000] bootmap [000000000001f000 - 0000000000086fff] pages 68
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0340000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a594] TEXT DATA BSS ==> [0001000000 - 000168a594]
[ 0.000000] #3 [0037627000 - 0037fef5ae] RAMDISK ==> [0037627000 - 0037fef5ae]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b32d] BRK ==> [000168b000 - 000168b32d]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [0000001000 - 0000001030] ACPI SLIT ==> [0000001000 - 0000001030]
[ 0.000000] #8 [000000a000 - 0000016840] MEMNODEMAP ==> [000000a000 - 0000016840]
[ 0.000000] Bootmem setup node 1 0000000340000000-0000000640000000
[ 0.000000] NODE_DATA [0000000340000000 - 0000000340007fff]
[ 0.000000] bootmap [0000000340008000 - 0000000340067fff] pages 60
[ 0.000000] (9 early reservations) ==> bootmem [0340000000 - 0640000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0001000000 - 000168a594] TEXT DATA BSS
[ 0.000000] #3 [0037627000 - 0037fef5ae] RAMDISK
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved
[ 0.000000] #5 [000168b000 - 000168b32d] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [0000001000 - 0000001030] ACPI SLIT
[ 0.000000] #8 [000000a000 - 0000016840] MEMNODEMAP
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880001800000-ffff88000bffffff] on node 0
[ 0.000000] [ffffea000b600000-ffffea0015dfffff] PMD -> [ffff880340200000-ffff88034a9fffff] on node 1
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00640000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000bf699
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] 1: 0x00340000 -> 0x00640000
[ 0.000000] On node 0 totalpages: 3143225
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 114 pages reserved
[ 0.000000] DMA zone: 3830 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765649 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 3145728
[ 0.000000] Normal zone: 43008 pages used for memmap
[ 0.000000] Normal zone: 3102720 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x08] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x09] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x0a] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0b] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0d] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x40] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x16] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 22, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x17] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 23, version 33, address 0xfec80000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 64 CPUs, 52 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf699000 - 00000000bf6af000
[ 0.000000] PM: Registered nosave memory: 00000000bf6af000 - 00000000bf6ce000
[ 0.000000] PM: Registered nosave memory: 00000000bf6ce000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 00000000fec90000
[ 0.000000] PM: Registered nosave memory: 00000000fec90000 - 00000000fec94000
[ 0.000000] PM: Registered nosave memory: 00000000fec94000 - 00000000fecd0000
[ 0.000000] PM: Registered nosave memory: 00000000fecd0000 - 00000000fecd4000
[ 0.000000] PM: Registered nosave memory: 00000000fecd4000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:64 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000c200000 s90328 r8192 d24360 u131072
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 02 03 04 05 06 12 14 16 18 20 22 24 26 28 30
[ 0.000000] pcpu-alloc: [0] 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62
[ 0.000000] pcpu-alloc: [1] 01 07 08 09 10 11 13 15 17 19 21 23 25 27 29 31
[ 0.000000] pcpu-alloc: [1] 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 6199239
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/antares-root ro console=tty=00 console=ttyS0,115200n8 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 24721176k/26214400k available (3081k kernel code, 1058588k absent, 434636k reserved, 1889k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1464
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2600.482 MHz processor.
[ 0.012017] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.94 BogoMIPS (lpj=10401884)
[ 0.012037] Security Framework initialized
[ 0.012040] SELinux: Disabled at boot.
[ 0.014034] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.027188] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.031482] Mount-cache hash table entries: 256
[ 0.031649] Initializing cgroup subsys ns
[ 0.031651] Initializing cgroup subsys cpuacct
[ 0.031658] Initializing cgroup subsys devices
[ 0.031660] Initializing cgroup subsys freezer
[ 0.031662] Initializing cgroup subsys net_cls
[ 0.031684] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.031686] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.031688] CPU 0/0x8 -> Node 0
[ 0.031690] tseg: 00bf800000
[ 0.031691] CPU: Physical Processor ID: 0
[ 0.031692] CPU: Processor Core ID: 0
[ 0.031694] mce: CPU supports 6 MCE banks
[ 0.031702] Performance Events: AMD PMU driver.
[ 0.031706] ... version: 0
[ 0.031707] ... bit width: 48
[ 0.031708] ... generic registers: 4
[ 0.031710] ... value mask: 0000ffffffffffff
[ 0.031711] ... max period: 00007fffffffffff
[ 0.031713] ... fixed-purpose events: 0
[ 0.031714] ... event mask: 000000000000000f
[ 0.032354] ACPI: Core revision 20090903
[ 0.038298] Setting APIC routing to physical flat
[ 0.038791] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078489] CPU0: AMD Opteron(tm) Processor 4180 stepping 01
[ 0.080001] Booting processor 1 APIC 0x10 ip 0x6000
[ 0.016000] Initializing CPU#1
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 1/0x10 -> Node 1
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 0
[ 0.164102] CPU1: AMD Opteron(tm) Processor 4180 stepping 01
[ 0.164108] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168063] Booting processor 2 APIC 0x9 ip 0x6000
[ 0.016000] Initializing CPU#2
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 2/0x9 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 1
[ 0.256051] CPU2: AMD Opteron(tm) Processor 4180 stepping 01
[ 0.256056] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.260052] Booting processor 3 APIC 0xa ip 0x6000
[ 0.016000] Initializing CPU#3
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 3/0xa -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 2
[ 0.348097] CPU3: AMD Opteron(tm) Processor 4180 stepping 01
[ 0.348103] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.352058] Booting processor 4 APIC 0xb ip 0x6000
[ 0.016000] Initializing CPU#4
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 4/0xb -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 3
[ 0.440046] CPU4: AMD Opteron(tm) Processor 4180 stepping 01
[ 0.440051] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.444054] Booting processor 5 APIC 0xc ip 0x6000
[ 0.016000] Initializing CPU#5
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 5/0xc -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 4
[ 0.532090] CPU5: AMD Opteron(tm) Processor 4180 stepping 01
[ 0.532095] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.536056] Booting processor 6 APIC 0xd ip 0x6000
[ 0.016000] Initializing CPU#6
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 6/0xd -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 5
[ 0.624039] CPU6: AMD Opteron(tm) Processor 4180 stepping 01
[ 0.624044] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.628059] Booting processor 7 APIC 0x11 ip 0x6000
[ 0.016000] Initializing CPU#7
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 7/0x11 -> Node 1
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 1
[ 0.716087] CPU7: AMD Opteron(tm) Processor 4180 stepping 01
[ 0.716093] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.720071] Booting processor 8 APIC 0x12 ip 0x6000
[ 0.016000] Initializing CPU#8
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 8/0x12 -> Node 1
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 2
[ 0.808051] CPU8: AMD Opteron(tm) Processor 4180 stepping 01
[ 0.808057] checking TSC synchronization [CPU#0 -> CPU#8]: passed.
[ 0.812078] Booting processor 9 APIC 0x13 ip 0x6000
[ 0.016000] Initializing CPU#9
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 9/0x13 -> Node 1
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 3
[ 0.900028] CPU9: AMD Opteron(tm) Processor 4180 stepping 01
[ 0.900033] checking TSC synchronization [CPU#0 -> CPU#9]: passed.
[ 0.904071] Booting processor 10 APIC 0x14 ip 0x6000
[ 0.016000] Initializing CPU#10
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 10/0x14 -> Node 1
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 4
[ 0.992087] CPU10: AMD Opteron(tm) Processor 4180 stepping 01
[ 0.992092] checking TSC synchronization [CPU#0 -> CPU#10]: passed.
[ 0.996083] Booting processor 11 APIC 0x15 ip 0x6000
[ 0.016000] Initializing CPU#11
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.016000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.016000] CPU 11/0x15 -> Node 1
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 5
[ 1.084071] CPU11: AMD Opteron(tm) Processor 4180 stepping 01
[ 1.084077] checking TSC synchronization [CPU#0 -> CPU#11]: passed.
[ 1.088026] Brought up 12 CPUs
[ 1.088029] Total of 12 processors activated (62402.71 BogoMIPS).
[ 1.092100] CPU0 attaching sched-domain:
[ 1.092104] domain 0: span 0,2-6 level MC
[ 1.092106] groups: group ffff88000c20fbf0 cpus 0 group ffff88000c22fbf0 cpus 2 group ffff88000c24fbf0 cpus 3 group ffff88000c26fbf0 cpus 4 group ffff88000c28fbf0 cpus 5 group ffff88000c2afbf0 cpus 6
[ 1.092114] domain 1: span 0-11 level NODE
[ 1.092116] groups: group ffff88033e457000 cpus 0,2-6 (cpu_power = 6144) group ffff88033e457060 cpus 1,7-11 (cpu_power = 6144)
[ 1.092124] CPU1 attaching sched-domain:
[ 1.092125] domain 0: span 1,7-11 level MC
[ 1.092127] groups: group ffff88034ac0fbf0 cpus 1 group ffff88034ac2fbf0 cpus 7 group ffff88034ac4fbf0 cpus 8 group ffff88034ac6fbf0 cpus 9 group ffff88034ac8fbf0 cpus 10 group ffff88034acafbf0 cpus 11
[ 1.092134] domain 1: span 0-11 level NODE
[ 1.092136] groups: group ffff88063e465000 cpus 1,7-11 (cpu_power = 6144) group ffff88063e465060 cpus 0,2-6 (cpu_power = 6144)
[ 1.092142] CPU2 attaching sched-domain:
[ 1.092143] domain 0: span 0,2-6 level MC
[ 1.092145] groups: group ffff88000c22fbf0 cpus 2 group ffff88000c24fbf0 cpus 3 group ffff88000c26fbf0 cpus 4 group ffff88000c28fbf0 cpus 5 group ffff88000c2afbf0 cpus 6 group ffff88000c20fbf0 cpus 0
[ 1.092152] domain 1: span 0-11 level NODE
[ 1.092153] groups: group ffff88033e457000 cpus 0,2-6 (cpu_power = 6144) group ffff88033e457060 cpus 1,7-11 (cpu_power = 6144)
[ 1.092159] CPU3 attaching sched-domain:
[ 1.092160] domain 0: span 0,2-6 level MC
[ 1.092162] groups: group ffff88000c24fbf0 cpus 3 group ffff88000c26fbf0 cpus 4 group ffff88000c28fbf0 cpus 5 group ffff88000c2afbf0 cpus 6 group ffff88000c20fbf0 cpus 0 group ffff88000c22fbf0 cpus 2
[ 1.092169] domain 1: span 0-11 level NODE
[ 1.092170] groups: group ffff88033e457000 cpus 0,2-6 (cpu_power = 6144) group ffff88033e457060 cpus 1,7-11 (cpu_power = 6144)
[ 1.092176] CPU4 attaching sched-domain:
[ 1.092177] domain 0: span 0,2-6 level MC
[ 1.092179] groups: group ffff88000c26fbf0 cpus 4 group ffff88000c28fbf0 cpus 5 group ffff88000c2afbf0 cpus 6 group ffff88000c20fbf0 cpus 0 group ffff88000c22fbf0 cpus 2 group ffff88000c24fbf0 cpus 3
[ 1.092186] domain 1: span 0-11 level NODE
[ 1.092187] groups: group ffff88033e457000 cpus 0,2-6 (cpu_power = 6144) group ffff88033e457060 cpus 1,7-11 (cpu_power = 6144)
[ 1.092193] CPU5 attaching sched-domain:
[ 1.092194] domain 0: span 0,2-6 level MC
[ 1.092196] groups: group ffff88000c28fbf0 cpus 5 group ffff88000c2afbf0 cpus 6 group ffff88000c20fbf0 cpus 0 group ffff88000c22fbf0 cpus 2 group ffff88000c24fbf0 cpus 3 group ffff88000c26fbf0 cpus 4
[ 1.092203] domain 1: span 0-11 level NODE
[ 1.092204] groups: group ffff88033e457000 cpus 0,2-6 (cpu_power = 6144) group ffff88033e457060 cpus 1,7-11 (cpu_power = 6144)
[ 1.092210] CPU6 attaching sched-domain:
[ 1.092211] domain 0: span 0,2-6 level MC
[ 1.092213] groups: group ffff88000c2afbf0 cpus 6 group ffff88000c20fbf0 cpus 0 group ffff88000c22fbf0 cpus 2 group ffff88000c24fbf0 cpus 3 group ffff88000c26fbf0 cpus 4 group ffff88000c28fbf0 cpus 5
[ 1.092220] domain 1: span 0-11 level NODE
[ 1.092221] groups: group ffff88033e457000 cpus 0,2-6 (cpu_power = 6144) group ffff88033e457060 cpus 1,7-11 (cpu_power = 6144)
[ 1.092227] CPU7 attaching sched-domain:
[ 1.092228] domain 0: span 1,7-11 level MC
[ 1.092230] groups: group ffff88034ac2fbf0 cpus 7 group ffff88034ac4fbf0 cpus 8 group ffff88034ac6fbf0 cpus 9 group ffff88034ac8fbf0 cpus 10 group ffff88034acafbf0 cpus 11 group ffff88034ac0fbf0 cpus 1
[ 1.092237] domain 1: span 0-11 level NODE
[ 1.092238] groups: group ffff88063e465000 cpus 1,7-11 (cpu_power = 6144) group ffff88063e465060 cpus 0,2-6 (cpu_power = 6144)
[ 1.092244] CPU8 attaching sched-domain:
[ 1.092245] domain 0: span 1,7-11 level MC
[ 1.092247] groups: group ffff88034ac4fbf0 cpus 8 group ffff88034ac6fbf0 cpus 9 group ffff88034ac8fbf0 cpus 10 group ffff88034acafbf0 cpus 11 group ffff88034ac0fbf0 cpus 1 group ffff88034ac2fbf0 cpus 7
[ 1.092254] domain 1: span 0-11 level NODE
[ 1.092255] groups: group ffff88063e465000 cpus 1,7-11 (cpu_power = 6144) group ffff88063e465060 cpus 0,2-6 (cpu_power = 6144)
[ 1.092261] CPU9 attaching sched-domain:
[ 1.092263] domain 0: span 1,7-11 level MC
[ 1.092264] groups: group ffff88034ac6fbf0 cpus 9 group ffff88034ac8fbf0 cpus 10 group ffff88034acafbf0 cpus 11 group ffff88034ac0fbf0 cpus 1 group ffff88034ac2fbf0 cpus 7 group ffff88034ac4fbf0 cpus 8
[ 1.092271] domain 1: span 0-11 level NODE
[ 1.092273] groups: group ffff88063e465000 cpus 1,7-11 (cpu_power = 6144) group ffff88063e465060 cpus 0,2-6 (cpu_power = 6144)
[ 1.092278] CPU10 attaching sched-domain:
[ 1.092280] domain 0: span 1,7-11 level MC
[ 1.092281] groups: group ffff88034ac8fbf0 cpus 10 group ffff88034acafbf0 cpus 11 group ffff88034ac0fbf0 cpus 1 group ffff88034ac2fbf0 cpus 7 group ffff88034ac4fbf0 cpus 8 group ffff88034ac6fbf0 cpus 9
[ 1.092288] domain 1: span 0-11 level NODE
[ 1.092290] groups: group ffff88063e465000 cpus 1,7-11 (cpu_power = 6144) group ffff88063e465060 cpus 0,2-6 (cpu_power = 6144)
[ 1.092296] CPU11 attaching sched-domain:
[ 1.092297] domain 0: span 1,7-11 level MC
[ 1.092298] groups: group ffff88034acafbf0 cpus 11 group ffff88034ac0fbf0 cpus 1 group ffff88034ac2fbf0 cpus 7 group ffff88034ac4fbf0 cpus 8 group ffff88034ac6fbf0 cpus 9 group ffff88034ac8fbf0 cpus 10
[ 1.092306] domain 1: span 0-11 level NODE
[ 1.092307] groups: group ffff88063e465000 cpus 1,7-11 (cpu_power = 6144) group ffff88063e465060 cpus 0,2-6 (cpu_power = 6144)
[ 1.096064] devtmpfs: initialized
[ 1.100301] regulator: core version 0.5
[ 1.100301] NET: Registered protocol family 16
[ 1.100301] node 0 link 1: io port [e000, ffff]
[ 1.100301] TOM: 00000000c0000000 aka 3072M
[ 1.100301] Fam 10h mmconf [f0000000, f3ffffff]
[ 1.100301] node 0 link 1: mmio [e9800000, e9ffffff]
[ 1.100301] node 0 link 1: mmio [ea000000, ef2fffff]
[ 1.100301] node 0 link 1: mmio [fec80000, fecbffff]
[ 1.100301] TOM2: 0000000640000000 aka 25600M
[ 1.100301] bus: [00,3f] on node 0 link 1
[ 1.100301] bus: 00 index 0 io port: [0, ffff]
[ 1.100301] bus: 00 index 1 mmio: [c0000000, efffffff]
[ 1.100301] bus: 00 index 2 mmio: [f4000000, ffffffff]
[ 1.100301] bus: 00 index 3 mmio: [640000000, fcffffffff]
[ 1.100321] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.100323] ACPI: bus type pci registered
[ 1.100396] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 1.100398] PCI: MCFG area at f0000000 reserved in E820
[ 1.101979] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 1.101981] PCI: Using configuration type 1 for base access
[ 1.102778] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 1.102779] mtrr: probably your BIOS does not setup all CPUs.
[ 1.102781] mtrr: corrected configuration.
[ 1.104053] bio: create slab at 0
[ 1.104309] ACPI: EC: Look up EC in DSDT
[ 1.110495] ACPI: BIOS _OSI(Linux) query ignored
[ 1.111039] ACPI: Interpreter enabled
[ 1.111041] ACPI: (supports S0 S4 S5)
[ 1.111052] ACPI: Using IOAPIC for interrupt routing
[ 1.118796] ACPI: No dock devices found.
[ 1.120391] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.120472] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.120475] pci 0000:00:02.0: PME# disabled
[ 1.120509] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 1.120511] pci 0000:00:09.0: PME# disabled
[ 1.120556] pci 0000:00:11.0: reg 10 io port: [0xecd0-0xecd7]
[ 1.120562] pci 0000:00:11.0: reg 14 io port: [0xecf0-0xecf3]
[ 1.120568] pci 0000:00:11.0: reg 18 io port: [0xecd8-0xecdf]
[ 1.120574] pci 0000:00:11.0: reg 1c io port: [0xecf4-0xecf7]
[ 1.120580] pci 0000:00:11.0: reg 20 io port: [0xecb0-0xecbf]
[ 1.120586] pci 0000:00:11.0: reg 24 32bit mmio: [0xef2ff800-0xef2ffbff]
[ 1.120601] pci 0000:00:11.0: set SATA to AHCI mode
[ 1.120640] pci 0000:00:12.0: reg 10 32bit mmio: [0xef2fb000-0xef2fbfff]
[ 1.120687] pci 0000:00:12.1: reg 10 32bit mmio: [0xef2fc000-0xef2fcfff]
[ 1.120750] pci 0000:00:12.2: reg 10 32bit mmio: [0xef2ffe00-0xef2ffeff]
[ 1.120794] pci 0000:00:12.2: supports D1 D2
[ 1.120796] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 1.120799] pci 0000:00:12.2: PME# disabled
[ 1.120826] pci 0000:00:13.0: reg 10 32bit mmio: [0xef2fd000-0xef2fdfff]
[ 1.120873] pci 0000:00:13.1: reg 10 32bit mmio: [0xef2fe000-0xef2fefff]
[ 1.120935] pci 0000:00:13.2: reg 10 32bit mmio: [0xef2fff00-0xef2fffff]
[ 1.120980] pci 0000:00:13.2: supports D1 D2
[ 1.120981] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 1.120985] pci 0000:00:13.2: PME# disabled
[ 1.121086] pci 0000:00:14.1: reg 10 io port: [0xece0-0xece7]
[ 1.121091] pci 0000:00:14.1: reg 14 io port: [0xecf8-0xecfb]
[ 1.121097] pci 0000:00:14.1: reg 18 io port: [0xece8-0xecef]
[ 1.121102] pci 0000:00:14.1: reg 1c io port: [0xecfc-0xecff]
[ 1.121108] pci 0000:00:14.1: reg 20 io port: [0xecc0-0xeccf]
[ 1.121360] pci 0000:01:00.0: reg 10 io port: [0xfc00-0xfcff]
[ 1.121366] pci 0000:01:00.0: reg 14 64bit mmio: [0xef1f0000-0xef1fffff]
[ 1.121372] pci 0000:01:00.0: reg 1c 64bit mmio: [0xef180000-0xef1bffff]
[ 1.121378] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xef000000-0xef0fffff]
[ 1.121393] pci 0000:01:00.0: supports D1 D2
[ 1.121437] pci 0000:00:02.0: bridge io port: [0xf000-0xffff]
[ 1.121440] pci 0000:00:02.0: bridge 32bit mmio: [0xef000000-0xef1fffff]
[ 1.121478] pci 0000:02:00.0: reg 10 64bit mmio: [0xea000000-0xebffffff]
[ 1.121521] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.121525] pci 0000:02:00.0: PME# disabled
[ 1.121570] pci 0000:02:00.1: reg 10 64bit mmio: [0xec000000-0xedffffff]
[ 1.121613] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 1.121616] pci 0000:02:00.1: PME# disabled
[ 1.121684] pci 0000:00:09.0: bridge 32bit mmio: [0xea000000-0xedffffff]
[ 1.121728] pci 0000:03:04.0: reg 10 32bit mmio pref: [0xe9800000-0xe9ffffff]
[ 1.121735] pci 0000:03:04.0: reg 14 32bit mmio: [0xeeffc000-0xeeffffff]
[ 1.121742] pci 0000:03:04.0: reg 18 32bit mmio: [0xee000000-0xee7fffff]
[ 1.121833] pci 0000:00:14.4: transparent bridge
[ 1.121839] pci 0000:00:14.4: bridge 32bit mmio: [0xee000000-0xeeffffff]
[ 1.121843] pci 0000:00:14.4: bridge 32bit mmio pref: [0xe9800000-0xe9ffffff]
[ 1.121853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.121961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 1.122009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
[ 1.122054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 1.141490] ACPI: PCI Interrupt Link [LN24] (IRQs *24)
[ 1.141578] ACPI: PCI Interrupt Link [LN25] (IRQs *25)
[ 1.141666] ACPI: PCI Interrupt Link [LN26] (IRQs *26)
[ 1.141753] ACPI: PCI Interrupt Link [LN27] (IRQs *27)
[ 1.141841] ACPI: PCI Interrupt Link [LN28] (IRQs *28)
[ 1.141928] ACPI: PCI Interrupt Link [LN29] (IRQs *29)
[ 1.142015] ACPI: PCI Interrupt Link [LN30] (IRQs *30)
[ 1.142102] ACPI: PCI Interrupt Link [LN31] (IRQs *31)
[ 1.142190] ACPI: PCI Interrupt Link [LN32] (IRQs *32)
[ 1.142277] ACPI: PCI Interrupt Link [LN33] (IRQs *33)
[ 1.142364] ACPI: PCI Interrupt Link [LN34] (IRQs *34)
[ 1.142451] ACPI: PCI Interrupt Link [LN35] (IRQs *35)
[ 1.142539] ACPI: PCI Interrupt Link [LN36] (IRQs *36)
[ 1.142626] ACPI: PCI Interrupt Link [LN37] (IRQs *37)
[ 1.142713] ACPI: PCI Interrupt Link [LN38] (IRQs *38)
[ 1.142800] ACPI: PCI Interrupt Link [LN39] (IRQs *39)
[ 1.142887] ACPI: PCI Interrupt Link [LN40] (IRQs *40)
[ 1.142975] ACPI: PCI Interrupt Link [LN41] (IRQs *41)
[ 1.143062] ACPI: PCI Interrupt Link [LN42] (IRQs *42)
[ 1.143149] ACPI: PCI Interrupt Link [LN43] (IRQs *43)
[ 1.143237] ACPI: PCI Interrupt Link [LN44] (IRQs *44)
[ 1.143323] ACPI: PCI Interrupt Link [LN45] (IRQs *45)
[ 1.143411] ACPI: PCI Interrupt Link [LN46] (IRQs *46)
[ 1.143498] ACPI: PCI Interrupt Link [LN47] (IRQs *47)
[ 1.143587] ACPI: PCI Interrupt Link [LN48] (IRQs *48)
[ 1.143675] ACPI: PCI Interrupt Link [LN49] (IRQs *49)
[ 1.143762] ACPI: PCI Interrupt Link [LN50] (IRQs *50)
[ 1.143849] ACPI: PCI Interrupt Link [LN51] (IRQs *51)
[ 1.143937] ACPI: PCI Interrupt Link [LN52] (IRQs *52)
[ 1.144036] ACPI: PCI Interrupt Link [LN53] (IRQs *53)
[ 1.144123] ACPI: PCI Interrupt Link [LN54] (IRQs *54)
[ 1.144212] ACPI: PCI Interrupt Link [LN55] (IRQs *55)
[ 1.144291] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.144398] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.144504] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.144609] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 1.144714] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.144819] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0
[ 1.144924] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 1.145028] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 15) *0
[ 1.145123] vgaarb: device added: PCI:0000:03:04.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.145124] vgaarb: loaded
[ 1.145142] PCI: Using ACPI for IRQ routing
[ 1.145142] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.145142] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 1.146320] Switching to clocksource tsc
[ 1.149449] pnp: PnP ACPI init
[ 1.149472] ACPI: bus type pnp registered
[ 1.156923] pnp: PnP ACPI: found 11 devices
[ 1.156924] ACPI: ACPI bus type pnp unregistered
[ 1.156938] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.156941] system 00:07: ioport range 0x900-0x93f has been reserved
[ 1.156943] system 00:07: ioport range 0xd00-0xdfe has been reserved
[ 1.156945] system 00:07: ioport range 0xdff-0xdff has been reserved
[ 1.156947] system 00:07: ioport range 0xe00-0xefe has been reserved
[ 1.156950] system 00:07: ioport range 0xeff-0xeff has been reserved
[ 1.156952] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 1.156954] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 1.156956] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 1.156958] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 1.156960] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 1.156962] system 00:07: ioport range 0xc50-0xc52 has been reserved
[ 1.156964] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 1.156968] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 1.156970] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 1.156972] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 1.156974] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 1.156977] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 1.156979] system 00:07: ioport range 0xcd8-0xcdb has been reserved
[ 1.156981] system 00:07: ioport range 0xcdc-0xcdf has been reserved
[ 1.156983] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 1.156985] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 1.156988] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 1.156990] system 00:07: ioport range 0x950-0x950 has been reserved
[ 1.156994] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 1.156996] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 1.162435] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 1.162438] pci 0000:00:02.0: IO window: 0xf000-0xffff
[ 1.162441] pci 0000:00:02.0: MEM window: 0xef000000-0xef1fffff
[ 1.162443] pci 0000:00:02.0: PREFETCH window: disabled
[ 1.162447] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 1.162448] pci 0000:00:09.0: IO window: disabled
[ 1.162450] pci 0000:00:09.0: MEM window: 0xea000000-0xedffffff
[ 1.162452] pci 0000:00:09.0: PREFETCH window: disabled
[ 1.162455] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 1.162457] pci 0000:00:14.4: IO window: disabled
[ 1.162461] pci 0000:00:14.4: MEM window: 0xee000000-0xeeffffff
[ 1.162465] pci 0000:00:14.4: PREFETCH window: 0xe9800000-0xe9ffffff
[ 1.162569] ACPI: PCI Interrupt Link [LN52] enabled at IRQ 52
[ 1.162577] alloc irq_desc for 52 on node 0
[ 1.162581] alloc kstat_irqs on node 0
[ 1.162592] pci 0000:00:02.0: PCI INT A -> Link[LN52] -> GSI 52 (level, high) -> IRQ 52
[ 1.162595] pci 0000:00:02.0: setting latency timer to 64
[ 1.162671] ACPI: PCI Interrupt Link [LN53] enabled at IRQ 53
[ 1.162673] alloc irq_desc for 53 on node 0
[ 1.162674] alloc kstat_irqs on node 0
[ 1.162677] pci 0000:00:09.0: PCI INT A -> Link[LN53] -> GSI 53 (level, high) -> IRQ 53
[ 1.162680] pci 0000:00:09.0: setting latency timer to 64
[ 1.162687] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.162689] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.162692] pci_bus 0000:01: resource 0 io: [0xf000-0xffff]
[ 1.162693] pci_bus 0000:01: resource 1 mem: [0xef000000-0xef1fffff]
[ 1.162695] pci_bus 0000:02: resource 1 mem: [0xea000000-0xedffffff]
[ 1.162697] pci_bus 0000:03: resource 1 mem: [0xee000000-0xeeffffff]
[ 1.162699] pci_bus 0000:03: resource 2 pref mem [0xe9800000-0xe9ffffff]
[ 1.162701] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 1.162703] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.162739] NET: Registered protocol family 2
[ 1.163137] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.164687] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.167092] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.167390] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.167392] TCP reno registered
[ 1.167732] NET: Registered protocol family 1
[ 1.248268] pci 0000:03:04.0: Boot video device
[ 1.248324] Unpacking initramfs...
[ 1.426616] Freeing initrd memory: 10017k freed
[ 1.433117] PCI-DMA: Disabling AGP.
[ 1.433284] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.433286] PCI-DMA: using GART IOMMU.
[ 1.433288] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.436191] audit: initializing netlink socket (disabled)
[ 1.436204] type=2000 audit(1318862534.436:1): initialized
[ 1.440022] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.442041] VFS: Disk quotas dquot_6.5.2
[ 1.442096] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.442184] msgmni has been set to 32768
[ 1.443413] alg: No test for stdrng (krng)
[ 1.443471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.443474] io scheduler noop registered
[ 1.443476] io scheduler anticipatory registered
[ 1.443477] io scheduler deadline registered
[ 1.443500] io scheduler cfq registered (default)
[ 1.443670] alloc irq_desc for 56 on node 0
[ 1.443675] alloc kstat_irqs on node 0
[ 1.443682] pcieport 0000:00:02.0: irq 56 for MSI/MSI-X
[ 1.443686] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.443862] alloc irq_desc for 57 on node 0
[ 1.443865] alloc kstat_irqs on node 0
[ 1.443870] pcieport 0000:00:09.0: irq 57 for MSI/MSI-X
[ 1.443874] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.445013] Linux agpgart interface v0.103
[ 1.445148] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.445245] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.445460] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.445580] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.445723] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.445767] PNP: No PS/2 controller found. Probing ports directly.
[ 1.448561] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.448572] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.448664] mice: PS/2 mouse device common for all mice
[ 1.448699] rtc_cmos 00:04: RTC can wake from S4
[ 1.448733] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.448762] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.448773] cpuidle: using governor ladder
[ 1.448774] cpuidle: using governor menu
[ 1.448779] No iBFT detected.
[ 1.449146] TCP cubic registered
[ 1.449231] NET: Registered protocol family 10
[ 1.450186] Mobile IPv6
[ 1.450189] NET: Registered protocol family 17
[ 1.450246] PM: Resume from disk failed.
[ 1.450255] registered taskstats version 1
[ 1.450767] rtc_cmos 00:04: setting system clock to 2011-10-17 14:42:15 UTC (1318862535)
[ 1.450803] Initalizing network drop monitor service
[ 1.450881] Freeing unused kernel memory: 592k freed
[ 1.451010] Write protecting the kernel read-only data: 4236k
[ 1.465279] udev[187]: starting version 164
[ 1.489084] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[ 1.489216] ACPI: PCI Interrupt Link [LN48] enabled at IRQ 48
[ 1.489221] alloc irq_desc for 48 on node 0
[ 1.489223] alloc kstat_irqs on node 0
[ 1.489236] bnx2 0000:02:00.0: PCI INT A -> Link[LN48] -> GSI 48 (level, high) -> IRQ 48
[ 1.489243] bnx2 0000:02:00.0: setting latency timer to 64
[ 1.489374] bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 1.491305] SCSI subsystem initialized
[ 1.496819] bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 1.498938] usbcore: registered new interface driver usbfs
[ 1.498967] usbcore: registered new interface driver hub
[ 1.499005] usbcore: registered new device driver usb
[ 1.499796] eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr 60:eb:69:dc:16:f0
[ 1.499976] ACPI: PCI Interrupt Link [LN49] enabled at IRQ 49
[ 1.499980] alloc irq_desc for 49 on node 0
[ 1.499981] alloc kstat_irqs on node 0
[ 1.499987] bnx2 0000:02:00.1: PCI INT B -> Link[LN49] -> GSI 49 (level, high) -> IRQ 49
[ 1.499993] bnx2 0000:02:00.1: setting latency timer to 64
[ 1.500161] bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 1.500598] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.500655] alloc irq_desc for 17 on node 0
[ 1.500657] alloc kstat_irqs on node 0
[ 1.500665] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.500703] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.500729] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.500762] ehci_hcd 0000:00:12.2: debug port 1
[ 1.500785] ehci_hcd 0000:00:12.2: irq 17, io mem 0xef2ffe00
[ 1.502614] bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 1.504354] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.505773] eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr 60:eb:69:dc:16:f1
[ 1.507293] mpt2sas version 02.100.03.00 loaded
[ 1.507521] scsi0 : Fusion MPT SAS Host
[ 1.507820] ACPI: PCI Interrupt Link [LN24] enabled at IRQ 24
[ 1.507824] alloc irq_desc for 24 on node 0
[ 1.507826] alloc kstat_irqs on node 0
[ 1.507832] mpt2sas 0000:01:00.0: PCI INT A -> Link[LN24] -> GSI 24 (level, high) -> IRQ 24
[ 1.507837] mpt2sas 0000:01:00.0: setting latency timer to 64
[ 1.507840] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (24731788 kB)
[ 1.507923] alloc irq_desc for 58 on node 0
[ 1.507925] alloc kstat_irqs on node 0
[ 1.507928] mpt2sas 0000:01:00.0: irq 58 for MSI/MSI-X
[ 1.507941] mpt2sas0: PCI-MSI-X enabled: IRQ 58
[ 1.507943] mpt2sas0: iomem(0xef1f0000), mapped(0xffffc90007ec0000), size(65536)
[ 1.507945] mpt2sas0: ioport(0xfc00), size(256)
[ 1.507947] mpt2sas0: sending diag reset !!
[ 1.512075] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.512113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.512115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.512117] usb usb1: Product: EHCI Host Controller
[ 1.512119] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.512120] usb usb1: SerialNumber: 0000:00:12.2
[ 1.512181] usb usb1: configuration #1 chosen from 1 choice
[ 1.512204] hub 1-0:1.0: USB hub found
[ 1.512210] hub 1-0:1.0: 6 ports detected
[ 1.512313] alloc irq_desc for 16 on node 0
[ 1.512314] alloc kstat_irqs on node 0
[ 1.512322] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.512356] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.512365] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
[ 1.512397] ohci_hcd 0000:00:12.0: irq 16, io mem 0xef2fb000
[ 1.519767] libata version 3.00 loaded.
[ 1.572060] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.572067] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.572069] usb usb2: Product: OHCI Host Controller
[ 1.572070] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.572072] usb usb2: SerialNumber: 0000:00:12.0
[ 1.572134] usb usb2: configuration #1 chosen from 1 choice
[ 1.572153] hub 2-0:1.0: USB hub found
[ 1.572161] hub 2-0:1.0: 3 ports detected
[ 1.572289] alloc irq_desc for 19 on node 0
[ 1.572292] alloc kstat_irqs on node 0
[ 1.572300] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.572359] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.572371] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 1.572401] ehci_hcd 0000:00:13.2: debug port 1
[ 1.572422] ehci_hcd 0000:00:13.2: irq 19, io mem 0xef2fff00
[ 1.584063] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.584078] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.584080] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.584081] usb usb3: Product: EHCI Host Controller
[ 1.584083] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.584084] usb usb3: SerialNumber: 0000:00:13.2
[ 1.584142] usb usb3: configuration #1 chosen from 1 choice
[ 1.584165] hub 3-0:1.0: USB hub found
[ 1.584170] hub 3-0:1.0: 6 ports detected
[ 1.584326] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.584416] scsi1 : pata_atiixp
[ 1.584490] scsi2 : pata_atiixp
[ 1.584522] ata1: PATA max UDMA/100 cmd 0xece0 ctl 0xecf8 bmdma 0xecc0 irq 16
[ 1.584524] ata2: PATA max UDMA/100 cmd 0xece8 ctl 0xecfc bmdma 0xecc8 irq 16
[ 1.584713] ahci 0000:00:11.0: version 3.0
[ 1.584721] alloc irq_desc for 22 on node 0
[ 1.584722] alloc kstat_irqs on node 0
[ 1.584730] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.584846] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.584849] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.585076] scsi3 : ahci
[ 1.585177] scsi4 : ahci
[ 1.585248] scsi5 : ahci
[ 1.585333] scsi6 : ahci
[ 1.585370] ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22
[ 1.585373] ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22
[ 1.585376] ata5: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22
[ 1.585379] ata6: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22
[ 1.585537] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.585557] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.585569] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.585589] ohci_hcd 0000:00:12.1: irq 16, io mem 0xef2fc000
[ 1.644071] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.644074] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.644076] usb usb4: Product: OHCI Host Controller
[ 1.644077] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.644078] usb usb4: SerialNumber: 0000:00:12.1
[ 1.644140] usb usb4: configuration #1 chosen from 1 choice
[ 1.644160] hub 4-0:1.0: USB hub found
[ 1.644168] hub 4-0:1.0: 3 ports detected
[ 1.644277] alloc irq_desc for 18 on node 0
[ 1.644278] alloc kstat_irqs on node 0
[ 1.644288] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.644308] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.644321] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.644348] ohci_hcd 0000:00:13.0: irq 18, io mem 0xef2fd000
[ 1.704065] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.704068] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.704069] usb usb5: Product: OHCI Host Controller
[ 1.704071] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.704072] usb usb5: SerialNumber: 0000:00:13.0
[ 1.704132] usb usb5: configuration #1 chosen from 1 choice
[ 1.704152] hub 5-0:1.0: USB hub found
[ 1.704159] hub 5-0:1.0: 3 ports detected
[ 1.704275] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.704294] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.704305] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.704322] ohci_hcd 0000:00:13.1: irq 18, io mem 0xef2fe000
[ 1.748394] ata1.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
[ 1.748411] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 1.764361] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.764363] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.764365] usb usb6: Product: OHCI Host Controller
[ 1.764366] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.764367] usb usb6: SerialNumber: 0000:00:13.1
[ 1.764386] ata1.00: configured for UDMA/33
[ 1.764418] usb usb6: configuration #1 chosen from 1 choice
[ 1.764437] hub 6-0:1.0: USB hub found
[ 1.764444] hub 6-0:1.0: 3 ports detected
[ 1.770461] scsi 1:0:0:0: CD-ROM TEAC DVD-ROM DV-28SW R.2A PQ: 0 ANSI: 5
[ 1.824290] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1.904082] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.904102] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.904109] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.908087] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.942002] sr0: scsi3-mmc drive: 62x/62x cd/rw xa/form2 cdda tray
[ 1.942005] Uniform CD-ROM driver Revision: 3.20
[ 1.942084] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.944889] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.957207] usb 1-3: New USB device found, idVendor=0424, idProduct=2514
[ 1.957209] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.957317] usb 1-3: configuration #1 chosen from 1 choice
[ 1.957456] hub 1-3:1.0: USB hub found
[ 1.957540] hub 1-3:1.0: 4 ports detected
[ 2.824066] mpt2sas0: diag reset: SUCCESS
[ 3.276324] mpt2sas0: Allocated physical memory: size(1154 kB)
[ 3.276326] mpt2sas0: Current Controller Queue Depth(499), Max Controller Queue Depth(2607)
[ 3.276328] mpt2sas0: Scatter Gather Elements per IO(128)
[ 3.520581] mpt2sas0: LSISAS2008: FWVersion(07.15.04.00), ChipRevision(0x03), BiosVersion(07.11.01.00)
[ 3.520585] mpt2sas0: Dell PERC H200 Adapter: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1D)
[ 3.520587] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[ 3.520654] mpt2sas0: sending port enable !!
[ 5.105741] mpt2sas0: host_add: handle(0x0001), sas_addr(0x5782bcb02922db00), phys(8)
[ 5.106042] mpt2sas0: failure at /build/buildd-linux-2.6_2.6.32-38-amd64-bk66e4/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/scsi/mpt2sas/mpt2sas_scsih.c:3798/_scsih_add_device()!
[ 11.227220] mpt2sas0: port enable: SUCCESS
[ 11.227480] scsi 0:1:0:0: Direct-Access Dell Virtual Disk 1028 PQ: 0 ANSI: 6
[ 11.227831] scsi 0:1:0:0: RAID1: handle(0x004f), wwid(0x0706e257a6346619), pd_count(2), type(SATA)
[ 11.227835] scsi 0:1:0:0: qdepth(128), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
[ 11.227936] scsi 0:1:0:0: Attached scsi generic sg1 type 0
[ 11.229856] scsi 0:0:0:0: Direct-Access ATA WDC WD2502ABYS-1 3B05 PQ: 0 ANSI: 5
[ 11.230098] scsi 0:0:0:0: SATA: handle(0x000a), sas_addr(0x4433221106000000), device_name(0x4ee1500126a85941)
[ 11.230101] scsi 0:0:0:0: SATA: enclosure_logical_id(0x5782bcb02922db00), slot(1)
[ 11.230184] scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 11.230188] scsi 0:0:0:0: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
[ 11.230273] scsi 0:0:0:0: Attached scsi generic sg2 type 0
[ 11.232284] scsi 0:0:1:0: Direct-Access ATA WDC WD2502ABYS-1 3B05 PQ: 0 ANSI: 5
[ 11.232522] scsi 0:0:1:0: SATA: handle(0x000b), sas_addr(0x4433221107000000), device_name(0x4ee150015578ae94)
[ 11.232525] scsi 0:0:1:0: SATA: enclosure_logical_id(0x5782bcb02922db00), slot(0)
[ 11.232614] scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
[ 11.232617] scsi 0:0:1:0: qdepth(32), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
[ 11.232703] scsi 0:0:1:0: Attached scsi generic sg3 type 0
[ 11.237430] sd 0:1:0:0: [sda] 487063552 512-byte logical blocks: (249 GB/232 GiB)
[ 11.237574] sd 0:1:0:0: [sda] Write Protect is off
[ 11.237577] sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
[ 11.237657] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 11.237947] sda: sda1 sda2
[ 11.251234] sd 0:1:0:0: [sda] Attached SCSI disk
[ 11.417139] device-mapper: uevent: version 1.0.3
[ 11.417283] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 11.546995] PM: Starting manual resume from disk
[ 11.546999] PM: Resume from partition 254:1
[ 11.547000] PM: Checking hibernation image.
[ 11.547276] PM: Error -22 checking image file
[ 11.547278] PM: Resume from disk failed.
[ 11.572879] kjournald starting. Commit interval 5 seconds
[ 11.572886] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.222115] udev[572]: starting version 164
[ 12.404619] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 12.427524] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 12.427581] ACPI: Power Button [PWRF]
[ 12.428526] ACPI Error: No handler for Region [IPMI] (ffff88063e41e240) [IPMI] (20090903/evregion-319)
[ 12.428531] ACPI Error: Region IPMI(7) has no handler (20090903/exfldio-295)
[ 12.428539] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88063e420120), AE_NOT_EXIST
[ 12.428571] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88063e4200a0), AE_NOT_EXIST
[ 12.428591] ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20090903/power_meter-772)
[ 12.468246] processor LNXCPU:00: registered as cooling_device0
[ 12.468403] processor LNXCPU:01: registered as cooling_device1
[ 12.468564] processor LNXCPU:02: registered as cooling_device2
[ 12.468724] processor LNXCPU:03: registered as cooling_device3
[ 12.468892] processor LNXCPU:04: registered as cooling_device4
[ 12.469063] processor LNXCPU:05: registered as cooling_device5
[ 12.469225] processor LNXCPU:06: registered as cooling_device6
[ 12.469589] processor LNXCPU:07: registered as cooling_device7
[ 12.469756] processor LNXCPU:08: registered as cooling_device8
[ 12.469920] processor LNXCPU:09: registered as cooling_device9
[ 12.470083] processor LNXCPU:0a: registered as cooling_device10
[ 12.470243] processor LNXCPU:0b: registered as cooling_device11
[ 12.497664] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 12.641668] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x900, revision 0
[ 12.678959] EDAC MC: Ver: 2.1.0 Oct 3 2011
[ 12.690117] EDAC amd64_edac: Ver: 3.2.0 Oct 3 2011
[ 12.690221] EDAC amd64: ECC is enabled by BIOS.
[ 12.690330] EDAC amd64: ECC is enabled by BIOS.
[ 12.690393] EDAC MC: F10h CPU detected
[ 12.690404] EDAC amd64: f10_probe_valid_hardware() This machine is running with DDR3 memory. This is not currently supported. DCHR0=0x1f48090c DCHR1=0x1f48090c
[ 12.690407] EDAC amd64: Contact 'amd64_edac' module MAINTAINER to help add support.
[ 12.877218] Error: Driver 'pcspkr' is already registered, aborting...
[ 13.781925] EXT3 FS on dm-0, internal journal
[ 13.900989] loop: module loaded
[ 14.231009] Adding 15622136k swap on /dev/mapper/antares-swap. Priority:-1 extents:1 across:15622136k
[ 14.898708] kjournald starting. Commit interval 5 seconds
[ 14.913824] EXT3 FS on sda1, internal journal
[ 14.913830] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.951312] kjournald starting. Commit interval 5 seconds
[ 14.963862] EXT3 FS on dm-2, internal journal
[ 14.963866] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.992786] kjournald starting. Commit interval 5 seconds
[ 15.002886] EXT3 FS on dm-3, internal journal
[ 15.002890] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.482616] alloc irq_desc for 59 on node 0
[ 16.482622] alloc kstat_irqs on node 0
[ 16.482632] bnx2 0000:02:00.0: irq 59 for MSI/MSI-X
[ 16.482634] alloc irq_desc for 60 on node 0
[ 16.482636] alloc kstat_irqs on node 0
[ 16.482638] bnx2 0000:02:00.0: irq 60 for MSI/MSI-X
[ 16.482640] alloc irq_desc for 61 on node 0
[ 16.482641] alloc kstat_irqs on node 0
[ 16.482643] bnx2 0000:02:00.0: irq 61 for MSI/MSI-X
[ 16.482648] alloc irq_desc for 62 on node 0
[ 16.482649] alloc kstat_irqs on node 0
[ 16.482651] bnx2 0000:02:00.0: irq 62 for MSI/MSI-X
[ 16.482653] alloc irq_desc for 63 on node 0
[ 16.482654] alloc kstat_irqs on node 0
[ 16.482656] bnx2 0000:02:00.0: irq 63 for MSI/MSI-X
[ 16.482658] alloc irq_desc for 64 on node 0
[ 16.482659] alloc kstat_irqs on node 0
[ 16.482662] bnx2 0000:02:00.0: irq 64 for MSI/MSI-X
[ 16.482663] alloc irq_desc for 65 on node 0
[ 16.482664] alloc kstat_irqs on node 0
[ 16.482667] bnx2 0000:02:00.0: irq 65 for MSI/MSI-X
[ 16.482668] alloc irq_desc for 66 on node 0
[ 16.482669] alloc kstat_irqs on node 0
[ 16.482671] bnx2 0000:02:00.0: irq 66 for MSI/MSI-X
[ 16.482673] alloc irq_desc for 67 on node 0
[ 16.482674] alloc kstat_irqs on node 0
[ 16.482677] bnx2 0000:02:00.0: irq 67 for MSI/MSI-X
[ 16.529893] bnx2: eth0: using MSIX
[ 16.532063] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.821837] vboxdrv: Found 12 processor cores.
[ 16.821895] VBoxDrv: dbg - g_abExecMemory=ffffffffa02736c0
[ 16.822284] vboxdrv: fAsync=0 offMin=0xb9c offMax=0x64f4
[ 16.822347] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 16.822349] vboxdrv: Successfully loaded version 4.1.4 (interface 0x00190000).
[ 17.365390] vboxpci: IOMMU not found (not compiled)
[ 19.824236] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
[ 19.826343] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.016059] eth0: no IPv6 routers present
[ 51.431335] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[ 203.511427] device eth0 entered promiscuous mode
[ 211.266360] device eth0 left promiscuous mode
[ 214.500030] vboxnetflt: dropped 0 out of 8529 packets
[ 329.192229] device eth0 entered promiscuous mode