dmesg - first
hw-pmu counter.
[15362.983297] Switched to NOHz mode on CPU #3
[15362.983349] CPU3 is up
[15362.985997] ACPI: Waking up from system sleep state S3
[15363.055597] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[15363.055686] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[15363.055739] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[15363.055774] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[15363.055831] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[15363.055904] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[15363.055937] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[15363.056028] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[15363.056111] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[15363.056168] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[15363.056283] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[15363.056291] r8169 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[15363.056310] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[15363.056474] PM: early resume of devices complete after 0.933 msecs
[15363.056589] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[15363.056595] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[15363.056599] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[15363.056603] HDA Intel 0000:00:1b.0: setting latency timer to 64
[15363.056622] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[15363.056640] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[15363.056656] pci 0000:00:1e.0: setting latency timer to 64
[15363.056681] ahci 0000:00:1f.2: setting latency timer to 64
[15363.056688] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[15363.056743] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[15363.056751] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[15363.056755] HDA Intel 0000:01:00.1: setting latency timer to 64
[15363.057019] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[15363.057146] sd 0:0:0:0: [sda] Starting disk
[15363.057224] radeon 0000:01:00.0: power state changed by ACPI to D0
[15363.057227] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[15363.057230] radeon 0000:01:00.0: power state changed by ACPI to D0
[15363.057235] r8169 0000:03:00.0: PME# disabled
[15363.057237] radeon 0000:01:00.0: power state changed by ACPI to D0
[15363.057243] radeon 0000:01:00.0: power state changed by ACPI to D0
[15363.057249] radeon 0000:01:00.0: setting latency timer to 64
[15363.082048] radeon 0000:01:00.0: WB enabled
[15363.098698] [drm] ring test succeeded in 1 usecs
[15363.098718] [drm] ib test succeeded in 0 usecs
[15363.175236] i8042 kbd 00:07: wake-up capability disabled by ACPI
[15363.181752] Extended CMOS year: 2000
[15363.288011] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[15363.361589] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[15363.571522] ata2.00: configured for UDMA/100
[15365.398613] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[15365.409550] ata1.00: configured for UDMA/100
[15365.435177] PM: resume of devices complete after 2383.366 msecs
[15365.435307] PM: Finishing wakeup.
[15365.435308] Restarting tasks ... done.
[15365.480695] video LNXVIDEO:02: Restoring backlight state
[15365.481936] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[15365.508382] usb 1-1.5: new high speed USB device number 5 using ehci_hcd
[15365.596098] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[15365.596103] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15365.596107] usb 1-1.5: Product: USB2.0-CRW
[15365.596109] usb 1-1.5: Manufacturer: Generic
[15365.596112] usb 1-1.5: SerialNumber: 20071114173400000
[15365.614269] scsi6 : usb-storage 1-1.5:1.0
[15365.615200] usb 1-1.5: USB disconnect, device number 5
[15366.044814] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[15366.061337] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15366.066784] r8169 0000:03:00.0: p1p1: link down
[15366.067385] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[15368.669713] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[15368.671181] wlan0: authenticated
[15368.672056] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[15368.674705] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[15368.674709] wlan0: associated
[15368.675842] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15379.086367] wlan0: no IPv6 routers present
[15396.958106] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[15397.001011] cfg80211: Calling CRDA to update world regulatory domain
[15397.028368] cfg80211: World regulatory domain updated:
[15397.028372] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[15397.028376] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15397.028380] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[15397.028383] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[15397.028386] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15397.028389] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15397.028409] cfg80211: Calling CRDA for country: SE
[15397.034022] cfg80211: Regulatory domain changed to country: SE
[15397.034026] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[15397.034030] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15397.034033] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15397.034036] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15397.034039] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[15397.194273] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15397.204364] r8169 0000:03:00.0: p1p1: link down
[15397.205999] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[15399.794678] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[15399.796167] wlan0: authenticated
[15399.796827] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[15399.799645] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[15399.799653] wlan0: associated
[15399.802222] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15410.647805] wlan0: no IPv6 routers present
[19250.809838] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[19250.857721] cfg80211: Calling CRDA to update world regulatory domain
[19250.864232] cfg80211: World regulatory domain updated:
[19250.864240] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[19250.864250] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19250.864259] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19250.864268] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19250.864276] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19250.864285] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19250.864313] cfg80211: Calling CRDA for country: SE
[19250.871275] cfg80211: Regulatory domain changed to country: SE
[19250.871279] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[19250.871283] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[19250.871287] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[19250.871289] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[19250.871292] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[19252.179383] PM: Syncing filesystems ... done.
[19252.187727] PM: Preparing system for mem sleep
[19252.233518] Freezing user space processes ... (elapsed 0.01 seconds) done.
[19252.244816] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[19252.255754] PM: Entering mem sleep
[19252.255900] Suspending console(s) (use no_console_suspend to debug)
[19252.256525] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[19252.333330] sd 0:0:0:0: [sda] Stopping disk
[19252.337637] i8042 aux 00:08: wake-up capability disabled by ACPI
[19252.337652] i8042 kbd 00:07: wake-up capability enabled by ACPI
[19252.337773] HDA Intel 0000:01:00.1: PCI INT B disabled
[19252.337801] ACPI handle has no context!
[19252.338003] rt2800pci 0000:02:00.0: PCI INT A disabled
[19252.338010] ACPI handle has no context!
[19252.348546] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[19252.348613] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[19252.439544] HDA Intel 0000:00:1b.0: PCI INT A disabled
[19252.631031] radeon 0000:01:00.0: power state changed by ACPI to D3
[19252.791725] PM: suspend of devices complete after 536.551 msecs
[19252.791966] r8169 0000:03:00.0: PME# enabled
[19252.791998] r8169 0000:03:00.0: wake-up capability enabled by ACPI
[19252.824711] PM: late suspend of devices complete after 33.045 msecs
[19252.825002] ACPI: Preparing to enter system sleep state S3
[19252.900498] PM: Saving platform NVS memory
[19252.905369] Disabling non-boot CPUs ...
[19252.907496] CPU 1 is now offline
[19252.909659] CPU 2 is now offline
[19252.910555] Broke affinity for irq 21
[19252.911581] CPU 3 is now offline
[19252.912077] Extended CMOS year: 2000
[19252.912314] ACPI: Low-level resume complete
[19252.912381] PM: Restoring platform NVS memory
[19252.913011] Extended CMOS year: 2000
[19252.913058] Enabling non-boot CPUs ...
[19252.913166] Booting Node 0 Processor 1 APIC 0x1
[19252.913168] smpboot cpu 1: start_ip = 98000
[19253.003519] NMI watchdog enabled, takes one hw-pmu counter.
[19253.004084] Switched to NOHz mode on CPU #1
[19253.004269] CPU1 is up
[19253.004464] Booting Node 0 Processor 2 APIC 0x4
[19253.004469] smpboot cpu 2: start_ip = 98000
[19253.095389] NMI watchdog enabled, takes one hw-pmu counter.
[19253.095841] CPU2 is up
[19253.095890] Switched to NOHz mode on CPU #2
[19253.096008] Booting Node 0 Processor 3 APIC 0x5
[19253.096012] smpboot cpu 3: start_ip = 98000
[19253.187214] NMI watchdog enabled, takes one hw-pmu counter.
[19253.187631] CPU3 is up
[19253.189873] Switched to NOHz mode on CPU #3
[19253.190289] ACPI: Waking up from system sleep state S3
[19253.262029] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[19253.262118] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[19253.262170] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[19253.262205] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[19253.262263] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[19253.262336] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[19253.262369] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[19253.262460] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[19253.262543] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[19253.262596] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[19253.262713] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[19253.262721] r8169 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[19253.262741] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[19253.262904] PM: early resume of devices complete after 0.932 msecs
[19253.263060] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[19253.263068] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[19253.263102] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[19253.263110] HDA Intel 0000:00:1b.0: setting latency timer to 64
[19253.263115] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[19253.263125] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[19253.263165] pci 0000:00:1e.0: setting latency timer to 64
[19253.263181] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[19253.263184] ahci 0000:00:1f.2: setting latency timer to 64
[19253.263190] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[19253.263192] HDA Intel 0000:01:00.1: setting latency timer to 64
[19253.263487] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[19253.263496] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[19253.263669] sd 0:0:0:0: [sda] Starting disk
[19253.263746] radeon 0000:01:00.0: power state changed by ACPI to D0
[19253.263751] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[19253.263754] radeon 0000:01:00.0: power state changed by ACPI to D0
[19253.263758] r8169 0000:03:00.0: PME# disabled
[19253.263761] radeon 0000:01:00.0: power state changed by ACPI to D0
[19253.263765] radeon 0000:01:00.0: power state changed by ACPI to D0
[19253.263772] radeon 0000:01:00.0: setting latency timer to 64
[19253.289983] radeon 0000:01:00.0: WB enabled
[19253.306629] [drm] ring test succeeded in 1 usecs
[19253.306650] [drm] ib test succeeded in 0 usecs
[19253.381669] i8042 kbd 00:07: wake-up capability disabled by ACPI
[19253.390384] Extended CMOS year: 2000
[19253.495477] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[19253.568074] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[19253.777449] ata2.00: configured for UDMA/100
[19255.605991] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[19255.616272] ata1.00: configured for UDMA/100
[19255.642715] PM: resume of devices complete after 2384.422 msecs
[19255.642864] PM: Finishing wakeup.
[19255.642866] Restarting tasks ... done.
[19255.684048] video LNXVIDEO:02: Restoring backlight state
[19255.700129] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[19255.715857] usb 1-1.5: new high speed USB device number 6 using ehci_hcd
[19255.814061] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[19255.814066] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19255.814069] usb 1-1.5: Product: USB2.0-CRW
[19255.814072] usb 1-1.5: Manufacturer: Generic
[19255.814074] usb 1-1.5: SerialNumber: 20071114173400000
[19255.836363] scsi7 : usb-storage 1-1.5:1.0
[19255.925824] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[19255.942624] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19255.947205] r8169 0000:03:00.0: p1p1: link down
[19255.947973] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[19256.075386] usb 1-1.5: USB disconnect, device number 6
[19258.536018] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[19258.537584] wlan0: authenticated
[19258.538015] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[19258.541694] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=2)
[19258.541701] wlan0: associated
[19258.543482] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[19268.750934] wlan0: no IPv6 routers present
[19277.307196] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[19277.351362] cfg80211: Calling CRDA to update world regulatory domain
[19277.380992] cfg80211: World regulatory domain updated:
[19277.380999] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[19277.381008] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19277.381016] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19277.381023] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19277.381030] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19277.381036] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19277.381063] cfg80211: Calling CRDA for country: SE
[19277.387658] cfg80211: Regulatory domain changed to country: SE
[19277.387662] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[19277.387665] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[19277.387683] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[19277.387686] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[19277.387689] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[19277.588577] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[19277.595895] r8169 0000:03:00.0: p1p1: link down
[19277.596634] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[19280.182820] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[19280.184208] wlan0: authenticated
[19280.185066] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[19280.190751] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=2)
[19280.190755] wlan0: associated
[19280.191984] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[19291.274221] wlan0: no IPv6 routers present
[36961.633519] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[36961.674616] cfg80211: Calling CRDA to update world regulatory domain
[36961.687508] cfg80211: World regulatory domain updated:
[36961.687517] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[36961.687526] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36961.687535] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[36961.687542] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[36961.687550] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36961.687558] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36961.687589] cfg80211: Calling CRDA for country: SE
[36961.695977] cfg80211: Regulatory domain changed to country: SE
[36961.695981] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[36961.695984] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[36961.695987] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[36961.695989] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[36961.695991] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[36963.080521] PM: Syncing filesystems ... done.
[36963.089440] PM: Preparing system for mem sleep
[36963.549624] Freezing user space processes ... (elapsed 0.01 seconds) done.
[36963.561276] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[36963.572241] PM: Entering mem sleep
[36963.572383] Suspending console(s) (use no_console_suspend to debug)
[36963.572975] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[36963.573958] sd 0:0:0:0: [sda] Stopping disk
[36963.656230] i8042 aux 00:08: wake-up capability disabled by ACPI
[36963.656247] i8042 kbd 00:07: wake-up capability enabled by ACPI
[36963.656376] HDA Intel 0000:01:00.1: PCI INT B disabled
[36963.656403] ACPI handle has no context!
[36963.656630] rt2800pci 0000:02:00.0: PCI INT A disabled
[36963.656637] ACPI handle has no context!
[36963.667013] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[36963.667046] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[36963.758032] HDA Intel 0000:00:1b.0: PCI INT A disabled
[36963.967488] radeon 0000:01:00.0: power state changed by ACPI to D3
[36964.025414] PM: suspend of devices complete after 453.597 msecs
[36964.025662] r8169 0000:03:00.0: PME# enabled
[36964.025695] r8169 0000:03:00.0: wake-up capability enabled by ACPI
[36964.058383] PM: late suspend of devices complete after 33.029 msecs
[36964.058690] ACPI: Preparing to enter system sleep state S3
[36964.134100] PM: Saving platform NVS memory
[36964.138950] Disabling non-boot CPUs ...
[36964.140993] CPU 1 is now offline
[36964.143088] CPU 2 is now offline
[36964.143989] Broke affinity for irq 21
[36964.145022] CPU 3 is now offline
[36964.145520] Extended CMOS year: 2000
[36964.145759] ACPI: Low-level resume complete
[36964.145825] PM: Restoring platform NVS memory
[36964.146452] Extended CMOS year: 2000
[36964.146477] Enabling non-boot CPUs ...
[36964.146623] Booting Node 0 Processor 1 APIC 0x1
[36964.146625] smpboot cpu 1: start_ip = 98000
[36964.237300] NMI watchdog enabled, takes one hw-pmu counter.
[36964.237702] CPU1 is up
[36964.237732] Switched to NOHz mode on CPU #1
[36964.237870] Booting Node 0 Processor 2 APIC 0x4
[36964.237874] smpboot cpu 2: start_ip = 98000
[36964.329002] NMI watchdog enabled, takes one hw-pmu counter.
[36964.329352] CPU2 is up
[36964.329439] Booting Node 0 Processor 3 APIC 0x5
[36964.329440] smpboot cpu 3: start_ip = 98000
[36964.329546] Switched to NOHz mode on CPU #2
[36964.420846] NMI watchdog enabled, takes one hw-pmu counter.
[36964.421285] CPU3 is up
[36964.423536] Switched to NOHz mode on CPU #3
[36964.423955] ACPI: Waking up from system sleep state S3
[36964.496700] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[36964.496788] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[36964.496841] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[36964.496876] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[36964.496934] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[36964.497009] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[36964.497041] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[36964.497132] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[36964.497222] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[36964.497269] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[36964.497386] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[36964.497396] r8169 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[36964.497417] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[36964.497580] PM: early resume of devices complete after 0.937 msecs
[36964.497747] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[36964.497753] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[36964.497758] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[36964.497762] HDA Intel 0000:00:1b.0: setting latency timer to 64
[36964.497772] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[36964.497777] pci 0000:00:1e.0: setting latency timer to 64
[36964.497791] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[36964.497809] ahci 0000:00:1f.2: setting latency timer to 64
[36964.497852] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[36964.497860] HDA Intel 0000:01:00.1: setting latency timer to 64
[36964.497871] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[36964.497908] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[36964.497927] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[36964.498045] sd 0:0:0:0: [sda] Starting disk
[36964.498554] radeon 0000:01:00.0: power state changed by ACPI to D0
[36964.498561] radeon 0000:01:00.0: power state changed by ACPI to D0
[36964.498574] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[36964.498585] radeon 0000:01:00.0: power state changed by ACPI to D0
[36964.498594] r8169 0000:03:00.0: PME# disabled
[36964.498602] radeon 0000:01:00.0: power state changed by ACPI to D0
[36964.498616] radeon 0000:01:00.0: setting latency timer to 64
[36964.522146] radeon 0000:01:00.0: WB enabled
[36964.538775] [drm] ring test succeeded in 1 usecs
[36964.538795] [drm] ib test succeeded in 0 usecs
[36964.615334] i8042 kbd 00:07: wake-up capability disabled by ACPI
[36964.622538] Extended CMOS year: 2000
[36964.729020] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[36964.801686] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[36965.010141] ata2.00: configured for UDMA/100
[36966.839699] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[36966.851719] ata1.00: configured for UDMA/100
[36966.877493] PM: resume of devices complete after 2384.545 msecs
[36966.877616] PM: Finishing wakeup.
[36966.877618] Restarting tasks ... done.
[36966.916748] video LNXVIDEO:02: Restoring backlight state
[36966.928549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[36966.953522] usb 1-1.5: new high speed USB device number 7 using ehci_hcd
[36967.051453] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[36967.051458] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[36967.051461] usb 1-1.5: Product: USB2.0-CRW
[36967.051464] usb 1-1.5: Manufacturer: Generic
[36967.051466] usb 1-1.5: SerialNumber: 20071114173400000
[36967.071281] scsi8 : usb-storage 1-1.5:1.0
[36967.140598] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[36967.157988] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[36967.163380] r8169 0000:03:00.0: p1p1: link down
[36967.163971] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[36967.309848] usb 1-1.5: USB disconnect, device number 7
[36969.754210] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[36969.756832] wlan0: authenticated
[36969.757305] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[36969.766629] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[36969.766639] wlan0: associated
[36969.769328] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[36980.093276] wlan0: no IPv6 routers present
[36989.004465] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[36989.050957] cfg80211: Calling CRDA to update world regulatory domain
[36989.064206] cfg80211: World regulatory domain updated:
[36989.064210] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[36989.064215] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36989.064219] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[36989.064223] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[36989.064226] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36989.064230] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[36989.064247] cfg80211: Calling CRDA for country: SE
[36989.069898] cfg80211: Regulatory domain changed to country: SE
[36989.069905] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[36989.069912] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[36989.069917] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[36989.069923] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[36989.069928] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[36989.383021] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[36989.391683] r8169 0000:03:00.0: p1p1: link down
[36989.392382] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[36991.969189] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[36991.970696] wlan0: authenticated
[36991.971144] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[36991.978512] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[36991.978516] wlan0: associated
[36991.979571] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[37003.518853] wlan0: no IPv6 routers present
[42883.781041] keyboard: can't emulate rawmode for keycode 240
[42883.781057] keyboard: can't emulate rawmode for keycode 240
[42883.781066] hp_wmi: Unknown key code - 0x0
[56993.889606] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[56993.930006] cfg80211: Calling CRDA to update world regulatory domain
[56993.936136] cfg80211: World regulatory domain updated:
[56993.936142] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[56993.936150] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[56993.936156] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[56993.936162] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[56993.936168] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[56993.936174] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[56993.936197] cfg80211: Calling CRDA for country: SE
[56993.942646] cfg80211: Regulatory domain changed to country: SE
[56993.942652] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[56993.942660] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[56993.942665] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[56993.942671] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[56993.942676] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[56995.292567] PM: Syncing filesystems ... done.
[56995.302818] PM: Preparing system for mem sleep
[56995.354122] Freezing user space processes ... (elapsed 0.01 seconds) done.
[56995.365913] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[56995.376939] PM: Entering mem sleep
[56995.377083] Suspending console(s) (use no_console_suspend to debug)
[56995.377667] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[56995.459679] i8042 aux 00:08: wake-up capability disabled by ACPI
[56995.459695] i8042 kbd 00:07: wake-up capability enabled by ACPI
[56995.459824] HDA Intel 0000:01:00.1: PCI INT B disabled
[56995.459851] ACPI handle has no context!
[56995.460054] rt2800pci 0000:02:00.0: PCI INT A disabled
[56995.460060] ACPI handle has no context!
[56995.470662] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[56995.470745] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[56995.521259] sd 0:0:0:0: [sda] Stopping disk
[56995.561683] HDA Intel 0000:00:1b.0: PCI INT A disabled
[56995.841007] radeon 0000:01:00.0: power state changed by ACPI to D3
[56995.973758] PM: suspend of devices complete after 597.522 msecs
[56995.974017] r8169 0000:03:00.0: PME# enabled
[56995.974050] r8169 0000:03:00.0: wake-up capability enabled by ACPI
[56996.006743] PM: late suspend of devices complete after 33.043 msecs
[56996.007054] ACPI: Preparing to enter system sleep state S3
[56996.082469] PM: Saving platform NVS memory
[56996.087310] Disabling non-boot CPUs ...
[56996.089473] CPU 1 is now offline
[56996.091626] CPU 2 is now offline
[56996.092531] Broke affinity for irq 21
[56996.093555] CPU 3 is now offline
[56996.094043] Extended CMOS year: 2000
[56996.094282] ACPI: Low-level resume complete
[56996.094349] PM: Restoring platform NVS memory
[56996.094974] Extended CMOS year: 2000
[56996.094998] Enabling non-boot CPUs ...
[56996.095148] Booting Node 0 Processor 1 APIC 0x1
[56996.095150] smpboot cpu 1: start_ip = 98000
[56996.185643] NMI watchdog enabled, takes one hw-pmu counter.
[56996.186048] CPU1 is up
[56996.186095] Switched to NOHz mode on CPU #1
[56996.186187] Booting Node 0 Processor 2 APIC 0x4
[56996.186191] smpboot cpu 2: start_ip = 98000
[56996.277324] NMI watchdog enabled, takes one hw-pmu counter.
[56996.277812] CPU2 is up
[56996.277900] Booting Node 0 Processor 3 APIC 0x5
[56996.277902] smpboot cpu 3: start_ip = 98000
[56996.277913] Switched to NOHz mode on CPU #2
[56996.369324] NMI watchdog enabled, takes one hw-pmu counter.
[56996.369762] Switched to NOHz mode on CPU #3
[56996.369780] CPU3 is up
[56996.372420] ACPI: Waking up from system sleep state S3
[56996.442061] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[56996.442150] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[56996.442203] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[56996.442237] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[56996.442294] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[56996.442368] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[56996.442400] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[56996.442492] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[56996.442575] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[56996.442632] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[56996.442746] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[56996.442754] r8169 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[56996.442774] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[56996.442937] PM: early resume of devices complete after 0.932 msecs
[56996.443048] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[56996.443057] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[56996.443089] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[56996.443097] HDA Intel 0000:00:1b.0: setting latency timer to 64
[56996.443107] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[56996.443117] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[56996.443133] pci 0000:00:1e.0: setting latency timer to 64
[56996.443162] ahci 0000:00:1f.2: setting latency timer to 64
[56996.443166] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[56996.443177] HDA Intel 0000:01:00.1: setting latency timer to 64
[56996.443189] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[56996.443237] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[56996.443250] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[56996.443643] sd 0:0:0:0: [sda] Starting disk
[56996.443768] radeon 0000:01:00.0: power state changed by ACPI to D0
[56996.443774] radeon 0000:01:00.0: power state changed by ACPI to D0
[56996.443783] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[56996.443792] radeon 0000:01:00.0: power state changed by ACPI to D0
[56996.443798] r8169 0000:03:00.0: PME# disabled
[56996.443802] radeon 0000:01:00.0: power state changed by ACPI to D0
[56996.443813] radeon 0000:01:00.0: setting latency timer to 64
[56996.467421] radeon 0000:01:00.0: WB enabled
[56996.484013] [drm] ring test succeeded in 1 usecs
[56996.484033] [drm] ib test succeeded in 0 usecs
[56996.561694] i8042 kbd 00:07: wake-up capability disabled by ACPI
[56996.568313] Extended CMOS year: 2000
[56996.675469] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[56996.747058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[56996.958587] ata2.00: configured for UDMA/100
[56998.785034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[56998.798165] ata1.00: configured for UDMA/100
[56998.823745] PM: resume of devices complete after 2385.473 msecs
[56998.823924] PM: Finishing wakeup.
[56998.823927] Restarting tasks ... done.
[56998.861006] video LNXVIDEO:02: Restoring backlight state
[56998.874281] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[56998.896838] usb 1-1.5: new high speed USB device number 8 using ehci_hcd
[56998.993647] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[56998.993652] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[56998.993655] usb 1-1.5: Product: USB2.0-CRW
[56998.993658] usb 1-1.5: Manufacturer: Generic
[56998.993660] usb 1-1.5: SerialNumber: 20071114173400000
[56999.011933] scsi9 : usb-storage 1-1.5:1.0
[56999.064315] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[56999.077616] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[56999.082552] r8169 0000:03:00.0: p1p1: link down
[56999.083144] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[56999.255528] usb 1-1.5: USB disconnect, device number 8
[57001.662196] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[57001.663651] wlan0: authenticated
[57001.664933] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[57001.667693] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[57001.667697] wlan0: associated
[57001.669204] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[57013.051704] wlan0: no IPv6 routers present
[57037.839062] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[57037.881584] cfg80211: Calling CRDA to update world regulatory domain
[57037.889297] cfg80211: World regulatory domain updated:
[57037.889305] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[57037.889316] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57037.889375] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[57037.889384] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[57037.889392] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57037.889401] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[57037.889430] cfg80211: Calling CRDA for country: SE
[57037.898135] cfg80211: Regulatory domain changed to country: SE
[57037.898144] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[57037.898153] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[57037.898161] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[57037.898168] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[57037.898176] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[57038.094748] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[57038.102043] r8169 0000:03:00.0: p1p1: link down
[57038.102526] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[57040.687464] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[57040.688926] wlan0: authenticated
[57040.689317] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[57040.692164] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[57040.692169] wlan0: associated
[57040.693407] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[57051.136123] wlan0: no IPv6 routers present
[67501.423136] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[67501.464170] cfg80211: Calling CRDA to update world regulatory domain
[67501.480955] cfg80211: World regulatory domain updated:
[67501.480959] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[67501.480963] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[67501.480966] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[67501.480968] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[67501.480971] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[67501.480973] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[67501.480986] cfg80211: Calling CRDA for country: SE
[67501.484935] cfg80211: Regulatory domain changed to country: SE
[67501.484938] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[67501.484942] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[67501.484945] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[67501.484948] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[67501.484951] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[67502.781514] PM: Syncing filesystems ... done.
[67502.792009] PM: Preparing system for mem sleep
[67502.836523] Freezing user space processes ... (elapsed 0.01 seconds) done.
[67502.847998] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[67502.859010] PM: Entering mem sleep
[67502.859167] Suspending console(s) (use no_console_suspend to debug)
[67502.859798] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[67502.936014] sd 0:0:0:0: [sda] Stopping disk
[67502.940139] i8042 aux 00:08: wake-up capability disabled by ACPI
[67502.940155] i8042 kbd 00:07: wake-up capability enabled by ACPI
[67502.940284] HDA Intel 0000:01:00.1: PCI INT B disabled
[67502.940311] ACPI handle has no context!
[67502.940544] rt2800pci 0000:02:00.0: PCI INT A disabled
[67502.940552] ACPI handle has no context!
[67502.950755] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[67502.950816] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[67503.041702] HDA Intel 0000:00:1b.0: PCI INT A disabled
[67503.244241] radeon 0000:01:00.0: power state changed by ACPI to D3
[67503.390974] PM: suspend of devices complete after 532.532 msecs
[67503.391218] r8169 0000:03:00.0: PME# enabled
[67503.391252] r8169 0000:03:00.0: wake-up capability enabled by ACPI
[67503.423917] PM: late suspend of devices complete after 33.002 msecs
[67503.424211] ACPI: Preparing to enter system sleep state S3
[67503.499688] PM: Saving platform NVS memory
[67503.504594] Disabling non-boot CPUs ...
[67503.506723] CPU 1 is now offline
[67503.509070] CPU 2 is now offline
[67503.510156] Broke affinity for irq 21
[67503.511182] CPU 3 is now offline
[67503.511658] Extended CMOS year: 2000
[67503.511894] ACPI: Low-level resume complete
[67503.511962] PM: Restoring platform NVS memory
[67503.512593] Extended CMOS year: 2000
[67503.512618] Enabling non-boot CPUs ...
[67503.512764] Booting Node 0 Processor 1 APIC 0x1
[67503.512765] smpboot cpu 1: start_ip = 98000
[67503.603796] NMI watchdog enabled, takes one hw-pmu counter.
[67503.604160] CPU1 is up
[67503.604259] Booting Node 0 Processor 2 APIC 0x4
[67503.604261] smpboot cpu 2: start_ip = 98000
[67503.604306] Switched to NOHz mode on CPU #1
[67503.695626] NMI watchdog enabled, takes one hw-pmu counter.
[67503.696084] CPU2 is up
[67503.696124] Switched to NOHz mode on CPU #2
[67503.696238] Booting Node 0 Processor 3 APIC 0x5
[67503.696242] smpboot cpu 3: start_ip = 98000
[67503.787554] NMI watchdog enabled, takes one hw-pmu counter.
[67503.787986] Switched to NOHz mode on CPU #3
[67503.788008] CPU3 is up
[67503.790656] ACPI: Waking up from system sleep state S3
[67503.860250] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[67503.860340] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[67503.860393] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[67503.860428] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[67503.860486] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[67503.860560] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[67503.860592] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[67503.860684] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[67503.860768] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[67503.860824] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[67503.860940] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[67503.860948] r8169 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[67503.860969] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[67503.861132] PM: early resume of devices complete after 0.938 msecs
[67503.861420] ahci 0000:00:1f.2: setting latency timer to 64
[67503.861435] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[67503.861442] HDA Intel 0000:01:00.1: setting latency timer to 64
[67503.861476] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[67503.861497] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[67503.861566] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[67503.861575] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[67503.861599] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[67503.861609] HDA Intel 0000:00:1b.0: setting latency timer to 64
[67503.861657] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[67503.861692] sd 0:0:0:0: [sda] Starting disk
[67503.861746] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[67503.861756] pci 0000:00:1e.0: setting latency timer to 64
[67503.861760] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[67503.862267] radeon 0000:01:00.0: power state changed by ACPI to D0
[67503.862271] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[67503.862274] radeon 0000:01:00.0: power state changed by ACPI to D0
[67503.862279] r8169 0000:03:00.0: PME# disabled
[67503.862281] radeon 0000:01:00.0: power state changed by ACPI to D0
[67503.862287] radeon 0000:01:00.0: power state changed by ACPI to D0
[67503.862294] radeon 0000:01:00.0: setting latency timer to 64
[67503.887729] radeon 0000:01:00.0: WB enabled
[67503.904359] [drm] ring test succeeded in 1 usecs
[67503.904379] [drm] ib test succeeded in 0 usecs
[67503.978913] i8042 kbd 00:07: wake-up capability disabled by ACPI
[67503.984933] Extended CMOS year: 2000
[67504.093550] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[67504.165272] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[67504.375168] ata2.00: configured for UDMA/100
[67506.203281] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[67506.215721] ata1.00: configured for UDMA/100
[67506.241501] PM: resume of devices complete after 2385.018 msecs
[67506.241629] PM: Finishing wakeup.
[67506.241631] Restarting tasks ... done.
[67506.281217] video LNXVIDEO:02: Restoring backlight state
[67506.285892] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[67506.307123] usb 1-1.5: new high speed USB device number 9 using ehci_hcd
[67506.405394] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[67506.405398] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[67506.405401] usb 1-1.5: Product: USB2.0-CRW
[67506.405402] usb 1-1.5: Manufacturer: Generic
[67506.405404] usb 1-1.5: SerialNumber: 20071114173400000
[67506.423602] scsi10 : usb-storage 1-1.5:1.0
[67506.493147] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[67506.510726] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[67506.515286] r8169 0000:03:00.0: p1p1: link down
[67506.515950] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[67506.673632] usb 1-1.5: USB disconnect, device number 9
[67509.108162] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[67509.109703] wlan0: authenticated
[67509.110119] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[67509.112837] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=2)
[67509.112841] wlan0: associated
[67509.113802] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[67519.810825] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[67519.857389] cfg80211: Calling CRDA to update world regulatory domain
[67519.864210] cfg80211: World regulatory domain updated:
[67519.864213] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[67519.864216] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[67519.864219] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[67519.864222] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[67519.864224] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[67519.864227] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[67519.864237] cfg80211: Calling CRDA for country: SE
[67519.868725] cfg80211: Regulatory domain changed to country: SE
[67519.868729] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[67519.868734] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[67519.868737] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[67519.868741] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[67519.868744] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[67520.074265] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[67520.082635] r8169 0000:03:00.0: p1p1: link down
[67520.083831] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[67522.672960] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[67522.674403] wlan0: authenticated
[67522.675003] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[67522.677986] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=2)
[67522.677993] wlan0: associated
[67522.680119] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[67533.195622] wlan0: no IPv6 routers present
[84838.405564] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[84838.445418] cfg80211: Calling CRDA to update world regulatory domain
[84838.771889] cfg80211: World regulatory domain updated:
[84838.771893] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[84838.771896] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[84838.771898] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[84838.771901] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[84838.771904] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[84838.771906] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[84838.771917] cfg80211: Calling CRDA for country: SE
[84838.775558] cfg80211: Regulatory domain changed to country: SE
[84838.775561] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[84838.775564] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[84838.775567] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[84838.775569] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[84838.775571] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[84839.689901] PM: Syncing filesystems ... done.
[84839.700277] PM: Preparing system for mem sleep
[84840.160337] Freezing user space processes ... (elapsed 0.01 seconds) done.
[84840.171833] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[84840.182848] PM: Entering mem sleep
[84840.182984] Suspending console(s) (use no_console_suspend to debug)
[84840.183572] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[84840.184306] sd 0:0:0:0: [sda] Stopping disk
[84840.265548] i8042 aux 00:08: wake-up capability disabled by ACPI
[84840.265567] i8042 kbd 00:07: wake-up capability enabled by ACPI
[84840.266030] rt2800pci 0000:02:00.0: PCI INT A disabled
[84840.266038] ACPI handle has no context!
[84840.276574] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[84840.276592] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[84840.366450] HDA Intel 0000:01:00.1: PCI INT B disabled
[84840.366495] ACPI handle has no context!
[84840.367543] HDA Intel 0000:00:1b.0: PCI INT A disabled
[84840.647903] radeon 0000:01:00.0: power state changed by ACPI to D3
[84840.648026] PM: suspend of devices complete after 465.632 msecs
[84840.648275] r8169 0000:03:00.0: PME# enabled
[84840.648310] r8169 0000:03:00.0: wake-up capability enabled by ACPI
[84840.680899] PM: late suspend of devices complete after 32.933 msecs
[84840.681197] ACPI: Preparing to enter system sleep state S3
[84840.756631] PM: Saving platform NVS memory
[84840.761528] Disabling non-boot CPUs ...
[84840.763663] CPU 1 is now offline
[84840.765958] CPU 2 is now offline
[84840.766980] Broke affinity for irq 21
[84840.768006] CPU 3 is now offline
[84840.768449] Extended CMOS year: 2000
[84840.768686] ACPI: Low-level resume complete
[84840.768753] PM: Restoring platform NVS memory
[84840.769378] Extended CMOS year: 2000
[84840.769402] Enabling non-boot CPUs ...
[84840.769567] Booting Node 0 Processor 1 APIC 0x1
[84840.769568] smpboot cpu 1: start_ip = 98000
[84840.860704] NMI watchdog enabled, takes one hw-pmu counter.
[84840.861104] CPU1 is up
[84840.861203] Booting Node 0 Processor 2 APIC 0x4
[84840.861205] smpboot cpu 2: start_ip = 98000
[84840.861251] Switched to NOHz mode on CPU #1
[84840.952647] NMI watchdog enabled, takes one hw-pmu counter.
[84840.953049] CPU2 is up
[84840.953068] Switched to NOHz mode on CPU #2
[84840.953191] Booting Node 0 Processor 3 APIC 0x5
[84840.953195] smpboot cpu 3: start_ip = 98000
[84841.044392] NMI watchdog enabled, takes one hw-pmu counter.
[84841.044810] CPU3 is up
[84841.047050] Switched to NOHz mode on CPU #3
[84841.047466] ACPI: Waking up from system sleep state S3
[84841.118220] pcieport 0000:00:01.0: restoring config space at offset 0x7 (was 0x4040, writing 0x20004040)
[84841.118227] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[84841.118314] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[84841.118367] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[84841.118402] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[84841.118459] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[84841.118533] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[84841.118566] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[84841.118658] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[84841.118748] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[84841.118795] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[84841.118909] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[84841.118918] r8169 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[84841.118937] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[84841.119101] PM: early resume of devices complete after 0.935 msecs
[84841.119237] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[84841.119246] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[84841.119276] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[84841.119288] HDA Intel 0000:00:1b.0: setting latency timer to 64
[84841.119300] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[84841.119310] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[84841.119346] pci 0000:00:1e.0: setting latency timer to 64
[84841.119357] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[84841.119363] ahci 0000:00:1f.2: setting latency timer to 64
[84841.119423] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[84841.119429] HDA Intel 0000:01:00.1: setting latency timer to 64
[84841.119471] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[84841.119786] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[84841.119929] sd 0:0:0:0: [sda] Starting disk
[84841.119946] radeon 0000:01:00.0: power state changed by ACPI to D0
[84841.119954] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[84841.119959] radeon 0000:01:00.0: power state changed by ACPI to D0
[84841.119963] r8169 0000:03:00.0: PME# disabled
[84841.119967] radeon 0000:01:00.0: power state changed by ACPI to D0
[84841.119972] radeon 0000:01:00.0: power state changed by ACPI to D0
[84841.119978] radeon 0000:01:00.0: setting latency timer to 64
[84841.145051] radeon 0000:01:00.0: WB enabled
[84841.161695] [drm] ring test succeeded in 1 usecs
[84841.161715] [drm] ib test succeeded in 0 usecs
[84841.237846] i8042 kbd 00:07: wake-up capability disabled by ACPI
[84841.245266] Extended CMOS year: 2000
[84841.351523] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[84841.423212] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[84841.633050] ata2.00: configured for UDMA/100
[84843.462220] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[84843.477169] ata1.00: configured for UDMA/100
[84843.502895] PM: resume of devices complete after 2388.433 msecs
[84843.503037] PM: Finishing wakeup.
[84843.503039] Restarting tasks ... done.
[84843.546177] video LNXVIDEO:02: Restoring backlight state
[84843.550807] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[84843.576066] usb 1-1.5: new high speed USB device number 10 using ehci_hcd
[84843.674015] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[84843.674022] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[84843.674029] usb 1-1.5: Product: USB2.0-CRW
[84843.674033] usb 1-1.5: Manufacturer: Generic
[84843.674037] usb 1-1.5: SerialNumber: 20071114173400000
[84843.694009] scsi11 : usb-storage 1-1.5:1.0
[84843.775113] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[84843.790926] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[84843.797255] r8169 0000:03:00.0: p1p1: link down
[84843.797914] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[84843.931896] usb 1-1.5: USB disconnect, device number 10
[84846.382093] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[84846.383563] wlan0: authenticated
[84846.384116] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[84846.386864] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=2)
[84846.386871] wlan0: associated
[84846.388794] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[84857.753831] wlan0: no IPv6 routers present
[84863.864283] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[84863.904804] cfg80211: Calling CRDA to update world regulatory domain
[84863.919444] cfg80211: World regulatory domain updated:
[84863.919452] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[84863.919462] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[84863.919471] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[84863.919513] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[84863.919521] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[84863.919530] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[84863.919723] cfg80211: Calling CRDA for country: SE
[84863.928370] cfg80211: Regulatory domain changed to country: SE
[84863.928375] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[84863.928378] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[84863.928382] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[84863.928385] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[84863.928388] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[84864.129854] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[84864.138292] r8169 0000:03:00.0: p1p1: link down
[84864.139384] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[84866.744652] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[84866.746094] wlan0: authenticated
[84866.746740] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[84866.749559] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=2)
[84866.749564] wlan0: associated
[84866.750618] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[84877.019555] wlan0: no IPv6 routers present
[133009.036051] keyboard: can't emulate rawmode for keycode 240
[133009.036068] keyboard: can't emulate rawmode for keycode 240
[133009.036077] hp_wmi: Unknown key code - 0x0
[142028.015621] keyboard: can't emulate rawmode for keycode 240
[142028.015638] keyboard: can't emulate rawmode for keycode 240
[142028.015647] hp_wmi: Unknown key code - 0x0
[146256.979922] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[146257.021364] cfg80211: Calling CRDA to update world regulatory domain
[146257.528266] cfg80211: World regulatory domain updated:
[146257.528270] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[146257.528273] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[146257.528276] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[146257.528278] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[146257.528281] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[146257.528283] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[146257.528294] cfg80211: Calling CRDA for country: SE
[146257.531539] cfg80211: Regulatory domain changed to country: SE
[146257.531542] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[146257.531545] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[146257.531547] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[146257.531550] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[146257.531552] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[146260.943072] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[146260.943079] PM: Marking nosave pages: 00000000bf63f000 - 00000000bf7ff000
[146260.943090] PM: Marking nosave pages: 00000000bf800000 - 0000000100000000
[146260.945123] PM: Basic memory bitmaps created
[146260.945126] PM: Syncing filesystems ... done.
[146261.002828] Freezing user space processes ... (elapsed 0.01 seconds) done.
[146261.014153] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[146261.025601] PM: Preallocating image memory... done (allocated 593169 pages)
[146263.173814] PM: Allocated 2372676 kbytes in 2.15 seconds (1103.57 MB/s)
[146263.173816] Suspending console(s) (use no_console_suspend to debug)
[146263.174315] i8042 aux 00:08: wake-up capability disabled by ACPI
[146263.174331] i8042 kbd 00:07: wake-up capability enabled by ACPI
[146263.174702] HDA Intel 0000:01:00.1: PCI INT B disabled
[146263.174733] ACPI handle has no context!
[146263.174862] rt2800pci 0000:02:00.0: PCI INT A disabled
[146263.174870] ACPI handle has no context!
[146263.275694] HDA Intel 0000:00:1b.0: PCI INT A disabled
[146263.374413] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[146263.700628] PM: freeze of devices complete after 527.850 msecs
[146263.701158] PM: late freeze of devices complete after 0.527 msecs
[146263.701457] ACPI: Preparing to enter system sleep state S4
[146263.776589] PM: Saving platform NVS memory
[146263.781503] Disabling non-boot CPUs ...
[146263.783664] CPU 1 is now offline
[146263.785929] CPU 2 is now offline
[146263.786789] Broke affinity for irq 21
[146263.787815] CPU 3 is now offline
[146263.788299] Extended CMOS year: 2000
[146263.788411] PM: Creating hibernation image:
[146263.860179] PM: Need to copy 413346 pages
[146263.860182] PM: Normal pages needed: 413346 + 1024, available pages: 599770
[146263.788452] PM: Restoring platform NVS memory
[146263.789164] Extended CMOS year: 2000
[146263.789193] Enabling non-boot CPUs ...
[146263.789348] Booting Node 0 Processor 1 APIC 0x1
[146263.789350] smpboot cpu 1: start_ip = 98000
[146263.880669] NMI watchdog enabled, takes one hw-pmu counter.
[146263.881145] CPU1 is up
[146263.881205] Switched to NOHz mode on CPU #1
[146263.881414] Booting Node 0 Processor 2 APIC 0x4
[146263.881416] smpboot cpu 2: start_ip = 98000
[146263.972516] NMI watchdog enabled, takes one hw-pmu counter.
[146263.973001] Switched to NOHz mode on CPU #2
[146263.973004] CPU2 is up
[146263.973327] Booting Node 0 Processor 3 APIC 0x5
[146263.973329] smpboot cpu 3: start_ip = 98000
[146264.064372] NMI watchdog enabled, takes one hw-pmu counter.
[146264.064795] Switched to NOHz mode on CPU #3
[146264.064998] CPU3 is up
[146264.067638] ACPI: Waking up from system sleep state S4
[146264.108351] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[146264.108449] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[146264.108495] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x3030, writing 0x20003030)
[146264.108733] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[146264.108848] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[146264.108967] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[146264.109135] PM: early restore of devices complete after 0.882 msecs
[146264.207439] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[146264.207470] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[146264.207475] usb usb1: root hub lost power or was reset
[146264.207482] HDA Intel 0000:00:1b.0: setting latency timer to 64
[146264.207519] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[146264.211371] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[146264.211386] pci 0000:00:1e.0: setting latency timer to 64
[146264.211402] ahci 0000:00:1f.2: setting latency timer to 64
[146264.211435] usb usb2: root hub lost power or was reset
[146264.215328] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[146264.215336] radeon 0000:01:00.0: power state changed by ACPI to D0
[146264.215342] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[146264.215344] radeon 0000:01:00.0: power state changed by ACPI to D0
[146264.215349] HDA Intel 0000:01:00.1: setting latency timer to 64
[146264.215354] radeon 0000:01:00.0: setting latency timer to 64
[146264.215399] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[146264.215407] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[146264.215628] sd 0:0:0:0: [sda] Starting disk
[146264.217530] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[146264.239298] radeon 0000:01:00.0: WB enabled
[146264.255888] [drm] ring test succeeded in 1 usecs
[146264.255906] [drm] ib test succeeded in 0 usecs
[146264.291704] i8042 kbd 00:07: wake-up capability disabled by ACPI
[146264.297781] Extended CMOS year: 2000
[146264.519026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[146264.520003] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[146264.522496] ata1.00: configured for UDMA/100
[146264.527725] ata2.00: configured for UDMA/100
[146264.537977] usb 1-1: reset high speed USB device number 2 using ehci_hcd
[146264.753509] usb 2-1: reset high speed USB device number 2 using ehci_hcd
[146265.143927] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[146266.334122] PM: restore of devices complete after 2130.962 msecs
[146266.334270] PM: Image restored successfully.
[146266.334272] Restarting tasks ... done.
[146266.338454] PM: Basic memory bitmaps freed
[146266.338460] video LNXVIDEO:02: Restoring backlight state
[146266.500054] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[146269.132458] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[146269.146983] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[146269.152145] r8169 0000:03:00.0: p1p1: link down
[146269.152875] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[146272.367778] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[146272.369236] wlan0: authenticated
[146272.369605] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[146272.372985] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=2)
[146272.372996] wlan0: associated
[146272.375164] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[146283.465372] wlan0: no IPv6 routers present
[146292.545974] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[146292.588654] cfg80211: Calling CRDA to update world regulatory domain
[146292.897776] cfg80211: World regulatory domain updated:
[146292.897783] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[146292.897790] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[146292.897797] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[146292.897803] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[146292.897809] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[146292.897815] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[146292.898170] cfg80211: Calling CRDA for country: SE
[146292.903773] cfg80211: Regulatory domain changed to country: SE
[146292.903779] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[146292.903787] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[146292.903793] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[146292.903799] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[146292.903804] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[146293.308162] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[146293.314597] r8169 0000:03:00.0: p1p1: link down
[146293.315404] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[146295.907262] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[146295.908763] wlan0: authenticated
[146295.910018] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[146295.912843] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=2)
[146295.912853] wlan0: associated
[146295.915622] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[146307.417779] wlan0: no IPv6 routers present
[179883.616412] Adding 6029308k swap on /dev/mapper/vg_laptop-lv_swap. Priority:-1 extents:1 across:6029308k
[194407.692880] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[194407.740798] cfg80211: Calling CRDA to update world regulatory domain
[194407.768368] cfg80211: World regulatory domain updated:
[194407.768372] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[194407.768390] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[194407.768393] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[194407.768397] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[194407.768400] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[194407.768405] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[194407.768423] cfg80211: Calling CRDA for country: SE
[194407.772026] cfg80211: Regulatory domain changed to country: SE
[194407.772030] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[194407.772033] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[194407.772036] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[194407.772038] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[194407.772040] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[194411.522790] PM: Syncing filesystems ... done.
[194411.532990] PM: Preparing system for mem sleep
[194412.196079] Freezing user space processes ... (elapsed 0.01 seconds) done.
[194412.207716] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[194412.218729] PM: Entering mem sleep
[194412.218867] Suspending console(s) (use no_console_suspend to debug)
[194412.230050] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[194412.230848] sd 0:0:0:0: [sda] Stopping disk
[194412.310826] i8042 aux 00:08: wake-up capability disabled by ACPI
[194412.310841] i8042 kbd 00:07: wake-up capability enabled by ACPI
[194412.311094] HDA Intel 0000:01:00.1: PCI INT B disabled
[194412.311122] ACPI handle has no context!
[194412.311242] rt2800pci 0000:02:00.0: PCI INT A disabled
[194412.311250] ACPI handle has no context!
[194412.412422] HDA Intel 0000:00:1b.0: PCI INT A disabled
[194412.634891] radeon 0000:01:00.0: power state changed by ACPI to D3
[194412.682787] PM: suspend of devices complete after 453.946 msecs
[194412.683070] r8169 0000:03:00.0: PME# enabled
[194412.683103] r8169 0000:03:00.0: wake-up capability enabled by ACPI
[194412.715791] PM: late suspend of devices complete after 33.061 msecs
[194412.716104] ACPI: Preparing to enter system sleep state S3
[194412.791522] PM: Saving platform NVS memory
[194412.796433] Disabling non-boot CPUs ...
[194412.798596] CPU 1 is now offline
[194412.800798] CPU 2 is now offline
[194412.801681] Broke affinity for irq 21
[194412.802710] CPU 3 is now offline
[194412.803208] Extended CMOS year: 2000
[194412.803446] ACPI: Low-level resume complete
[194412.803513] PM: Restoring platform NVS memory
[194412.804139] Extended CMOS year: 2000
[194412.804186] Enabling non-boot CPUs ...
[194412.804312] Booting Node 0 Processor 1 APIC 0x1
[194412.804314] smpboot cpu 1: start_ip = 98000
[194412.895548] NMI watchdog enabled, takes one hw-pmu counter.
[194412.895908] CPU1 is up
[194412.896006] Booting Node 0 Processor 2 APIC 0x4
[194412.896007] smpboot cpu 2: start_ip = 98000
[194412.896144] Switched to NOHz mode on CPU #1
[194412.986453] NMI watchdog enabled, takes one hw-pmu counter.
[194412.986850] CPU2 is up
[194412.986937] Booting Node 0 Processor 3 APIC 0x5
[194412.986939] smpboot cpu 3: start_ip = 98000
[194412.986964] Switched to NOHz mode on CPU #2
[194413.078291] NMI watchdog enabled, takes one hw-pmu counter.
[194413.078748] CPU3 is up
[194413.081006] Switched to NOHz mode on CPU #3
[194413.081416] ACPI: Waking up from system sleep state S3
[194413.155062] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[194413.155107] pci 0000:00:16.0: restoring config space at offset 0x1 (was 0x180006, writing 0x100006)
[194413.155204] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[194413.155239] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[194413.155253] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20003030, writing 0x3030)
[194413.155301] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[194413.155401] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[194413.155492] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[194413.155575] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[194413.155627] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[194413.155742] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[194413.155750] r8169 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[194413.155770] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[194413.155932] PM: early resume of devices complete after 0.927 msecs
[194413.156065] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[194413.156111] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[194413.156115] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[194413.156123] HDA Intel 0000:00:1b.0: setting latency timer to 64
[194413.156159] pci 0000:00:1e.0: setting latency timer to 64
[194413.156175] ahci 0000:00:1f.2: setting latency timer to 64
[194413.156204] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[194413.156257] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[194413.156263] HDA Intel 0000:01:00.1: setting latency timer to 64
[194413.156303] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[194413.156565] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[194413.156820] sd 0:0:0:0: [sda] Starting disk
[194413.156899] radeon 0000:01:00.0: power state changed by ACPI to D0
[194413.156904] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[194413.156909] radeon 0000:01:00.0: power state changed by ACPI to D0
[194413.156918] radeon 0000:01:00.0: setting latency timer to 64
[194413.156943] r8169 0000:03:00.0: PME# disabled
[194413.180858] radeon 0000:01:00.0: WB enabled
[194413.197455] [drm] ring test succeeded in 1 usecs
[194413.197476] [drm] ib test succeeded in 0 usecs
[194413.274744] i8042 kbd 00:07: wake-up capability disabled by ACPI
[194413.283166] Extended CMOS year: 2000
[194413.388382] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[194413.460159] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[194413.667318] ata2.00: configured for UDMA/100
[194415.448267] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[194415.460298] ata1.00: configured for UDMA/100
[194415.485940] PM: resume of devices complete after 2334.541 msecs
[194415.486204] PM: Finishing wakeup.
[194415.486206] Restarting tasks ... done.
[194415.529664] video LNXVIDEO:02: Restoring backlight state
[194415.538326] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[194415.561018] usb 1-1.5: new high speed USB device number 11 using ehci_hcd
[194415.659602] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[194415.659608] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[194415.659611] usb 1-1.5: Product: USB2.0-CRW
[194415.659614] usb 1-1.5: Manufacturer: Generic
[194415.659616] usb 1-1.5: SerialNumber: 20071114173400000
[194415.679865] scsi12 : usb-storage 1-1.5:1.0
[194415.714080] usb 1-1.5: USB disconnect, device number 11
[194415.767119] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[194415.785882] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[194415.790644] r8169 0000:03:00.0: p1p1: link down
[194415.791377] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[194418.387153] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[194418.388645] wlan0: authenticated
[194418.389324] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[194418.392164] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=2)
[194418.392168] wlan0: associated
[194418.393025] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[194429.183844] wlan0: no IPv6 routers present
[208025.862806] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[208025.904649] cfg80211: Calling CRDA to update world regulatory domain
[208026.313543] cfg80211: World regulatory domain updated:
[208026.313547] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[208026.313552] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[208026.313556] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[208026.313560] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[208026.313564] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[208026.313568] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[208026.313583] cfg80211: Calling CRDA for country: SE
[208026.319615] cfg80211: Regulatory domain changed to country: SE
[208026.319622] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[208026.319630] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[208026.319637] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[208026.319644] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[208026.319651] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[208027.254827] PM: Syncing filesystems ... done.
[208027.264008] PM: Preparing system for mem sleep
[208027.725208] Freezing user space processes ... (elapsed 0.01 seconds) done.
[208027.736710] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[208027.747714] PM: Entering mem sleep
[208027.747865] Suspending console(s) (use no_console_suspend to debug)
[208027.748505] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[208027.749380] sd 0:0:0:0: [sda] Stopping disk
[208027.830183] i8042 aux 00:08: wake-up capability disabled by ACPI
[208027.830198] i8042 kbd 00:07: wake-up capability enabled by ACPI
[208027.830480] rt2800pci 0000:02:00.0: PCI INT A disabled
[208027.830487] ACPI handle has no context!
[208027.830678] HDA Intel 0000:01:00.1: PCI INT B disabled
[208027.830706] ACPI handle has no context!
[208027.830862] HDA Intel 0000:00:1b.0: PCI INT A disabled
[208028.135994] radeon 0000:01:00.0: power state changed by ACPI to D3
[208028.198912] PM: suspend of devices complete after 451.609 msecs
[208028.199168] r8169 0000:03:00.0: PME# enabled
[208028.199201] r8169 0000:03:00.0: wake-up capability enabled by ACPI
[208028.231862] PM: late suspend of devices complete after 33.009 msecs
[208028.232173] ACPI: Preparing to enter system sleep state S3
[208028.307612] PM: Saving platform NVS memory
[208028.312524] Disabling non-boot CPUs ...
[208028.314574] CPU 1 is now offline
[208028.316917] CPU 2 is now offline
[208028.318939] CPU 3 is now offline
[208028.319411] Extended CMOS year: 2000
[208028.319649] ACPI: Low-level resume complete
[208028.319715] PM: Restoring platform NVS memory
[208028.320339] Extended CMOS year: 2000
[208028.320363] Enabling non-boot CPUs ...
[208028.320522] Booting Node 0 Processor 1 APIC 0x1
[208028.320524] smpboot cpu 1: start_ip = 98000
[208028.411627] NMI watchdog enabled, takes one hw-pmu counter.
[208028.411987] CPU1 is up
[208028.412086] Booting Node 0 Processor 2 APIC 0x4
[208028.412088] smpboot cpu 2: start_ip = 98000
[208028.412213] Switched to NOHz mode on CPU #1
[208028.502449] NMI watchdog enabled, takes one hw-pmu counter.
[208028.502805] CPU2 is up
[208028.502889] Booting Node 0 Processor 3 APIC 0x5
[208028.502891] smpboot cpu 3: start_ip = 98000
[208028.503033] Switched to NOHz mode on CPU #2
[208028.593439] NMI watchdog enabled, takes one hw-pmu counter.
[208028.593854] Switched to NOHz mode on CPU #3
[208028.593859] CPU3 is up
[208028.596523] ACPI: Waking up from system sleep state S3
[208028.666186] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[208028.666323] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[208028.666358] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[208028.666416] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[208028.666517] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[208028.666608] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[208028.666692] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[208028.666745] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[208028.666862] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[208028.666870] r8169 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[208028.666889] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[208028.667052] PM: early resume of devices complete after 0.922 msecs
[208028.667212] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[208028.667224] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[208028.667233] HDA Intel 0000:00:1b.0: setting latency timer to 64
[208028.667259] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[208028.667262] pci 0000:00:1e.0: setting latency timer to 64
[208028.667276] ahci 0000:00:1f.2: setting latency timer to 64
[208028.667327] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[208028.667349] HDA Intel 0000:01:00.1: setting latency timer to 64
[208028.667363] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[208028.667382] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[208028.667813] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[208028.668014] sd 0:0:0:0: [sda] Starting disk
[208028.668046] radeon 0000:01:00.0: power state changed by ACPI to D0
[208028.668052] radeon 0000:01:00.0: power state changed by ACPI to D0
[208028.668059] radeon 0000:01:00.0: setting latency timer to 64
[208028.669737] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[208028.669744] r8169 0000:03:00.0: PME# disabled
[208028.692421] radeon 0000:01:00.0: WB enabled
[208028.709029] [drm] ring test succeeded in 1 usecs
[208028.709048] [drm] ib test succeeded in 0 usecs
[208028.785811] i8042 kbd 00:07: wake-up capability disabled by ACPI
[208028.793832] Extended CMOS year: 2000
[208028.899505] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[208028.972178] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[208029.183814] ata2.00: configured for UDMA/100
[208031.010167] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[208031.018345] ata1.00: configured for UDMA/100
[208031.043914] PM: resume of devices complete after 2381.489 msecs
[208031.044090] PM: Finishing wakeup.
[208031.044092] Restarting tasks ... done.
[208031.086936] video LNXVIDEO:02: Restoring backlight state
[208031.098911] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[208031.117030] usb 1-1.5: new high speed USB device number 12 using ehci_hcd
[208031.206627] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[208031.206633] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[208031.206637] usb 1-1.5: Product: USB2.0-CRW
[208031.206640] usb 1-1.5: Manufacturer: Generic
[208031.206643] usb 1-1.5: SerialNumber: 20071114173400000
[208031.224701] scsi13 : usb-storage 1-1.5:1.0
[208031.225314] usb 1-1.5: USB disconnect, device number 12
[208031.307823] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[208031.325557] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[208031.330176] r8169 0000:03:00.0: p1p1: link down
[208031.330647] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[208033.920960] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[208033.922340] wlan0: authenticated
[208033.922719] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[208033.925421] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[208033.925428] wlan0: associated
[208033.927478] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[208044.863655] wlan0: no IPv6 routers present
[208054.377826] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[208054.422977] cfg80211: Calling CRDA to update world regulatory domain
[208054.434872] cfg80211: World regulatory domain updated:
[208054.434877] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[208054.434881] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[208054.434885] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[208054.434888] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[208054.434892] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[208054.434895] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[208054.435171] cfg80211: Calling CRDA for country: SE
[208054.439357] cfg80211: Regulatory domain changed to country: SE
[208054.439363] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[208054.439368] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[208054.439373] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[208054.439377] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[208054.439381] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[208054.619080] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[208054.627875] r8169 0000:03:00.0: p1p1: link down
[208054.628476] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[208057.225101] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[208057.226451] wlan0: authenticated
[208057.226814] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[208057.229557] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[208057.229561] wlan0: associated
[208057.230727] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[208068.049602] wlan0: no IPv6 routers present
[221969.383520] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[221969.425525] cfg80211: Calling CRDA to update world regulatory domain
[221969.431505] cfg80211: World regulatory domain updated:
[221969.431513] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[221969.431523] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[221969.431530] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[221969.431539] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[221969.431548] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[221969.431556] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[221969.431588] cfg80211: Calling CRDA for country: SE
[221969.441014] cfg80211: Regulatory domain changed to country: SE
[221969.441022] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[221969.441033] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[221969.441041] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[221969.441050] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[221969.441058] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[221970.651398] PM: Syncing filesystems ... done.
[221970.661686] PM: Preparing system for mem sleep
[221971.124460] Freezing user space processes ... (elapsed 0.01 seconds) done.
[221971.136018] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[221971.147025] PM: Entering mem sleep
[221971.147173] Suspending console(s) (use no_console_suspend to debug)
[221971.158437] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[221971.159115] sd 0:0:0:0: [sda] Stopping disk
[221971.237089] i8042 aux 00:08: wake-up capability disabled by ACPI
[221971.237104] i8042 kbd 00:07: wake-up capability enabled by ACPI
[221971.237290] HDA Intel 0000:01:00.1: PCI INT B disabled
[221971.237323] ACPI handle has no context!
[221971.237405] rt2800pci 0000:02:00.0: PCI INT A disabled
[221971.237413] ACPI handle has no context!
[221971.338743] HDA Intel 0000:00:1b.0: PCI INT A disabled
[221971.530265] radeon 0000:01:00.0: power state changed by ACPI to D3
[221971.611175] PM: suspend of devices complete after 454.052 msecs
[221971.611418] r8169 0000:03:00.0: PME# enabled
[221971.611450] r8169 0000:03:00.0: wake-up capability enabled by ACPI
[221971.644105] PM: late suspend of devices complete after 32.989 msecs
[221971.644407] ACPI: Preparing to enter system sleep state S3
[221971.719834] PM: Saving platform NVS memory
[221971.724745] Disabling non-boot CPUs ...
[221971.726842] CPU 1 is now offline
[221971.729063] CPU 2 is now offline
[221971.729946] Broke affinity for irq 21
[221971.730970] CPU 3 is now offline
[221971.731463] Extended CMOS year: 2000
[221971.731702] ACPI: Low-level resume complete
[221971.731768] PM: Restoring platform NVS memory
[221971.732395] Extended CMOS year: 2000
[221971.732442] Enabling non-boot CPUs ...
[221971.732570] Booting Node 0 Processor 1 APIC 0x1
[221971.732571] smpboot cpu 1: start_ip = 98000
[221971.823867] NMI watchdog enabled, takes one hw-pmu counter.
[221971.824234] CPU1 is up
[221971.824332] Booting Node 0 Processor 2 APIC 0x4
[221971.824334] smpboot cpu 2: start_ip = 98000
[221971.824461] Switched to NOHz mode on CPU #1
[221971.914666] NMI watchdog enabled, takes one hw-pmu counter.
[221971.915062] CPU2 is up
[221971.915149] Booting Node 0 Processor 3 APIC 0x5
[221971.915151] smpboot cpu 3: start_ip = 98000
[221971.915280] Switched to NOHz mode on CPU #2
[221972.005635] NMI watchdog enabled, takes one hw-pmu counter.
[221972.006082] CPU3 is up
[221972.006101] Switched to NOHz mode on CPU #3
[221972.008740] ACPI: Waking up from system sleep state S3
[221972.079447] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[221972.079583] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[221972.079618] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[221972.079676] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[221972.079777] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[221972.079868] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[221972.079958] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[221972.080005] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[221972.080118] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[221972.080126] r8169 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[221972.080145] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[221972.080308] PM: early resume of devices complete after 0.918 msecs
[221972.080438] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[221972.080466] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[221972.080477] HDA Intel 0000:00:1b.0: setting latency timer to 64
[221972.080486] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[221972.080493] pci 0000:00:1e.0: setting latency timer to 64
[221972.080521] ahci 0000:00:1f.2: setting latency timer to 64
[221972.080576] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[221972.080594] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[221972.080624] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[221972.080630] HDA Intel 0000:01:00.1: setting latency timer to 64
[221972.080928] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[221972.081060] sd 0:0:0:0: [sda] Starting disk
[221972.081094] radeon 0000:01:00.0: power state changed by ACPI to D0
[221972.081100] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[221972.081103] radeon 0000:01:00.0: power state changed by ACPI to D0
[221972.081106] r8169 0000:03:00.0: PME# disabled
[221972.081110] radeon 0000:01:00.0: setting latency timer to 64
[221972.105503] radeon 0000:01:00.0: WB enabled
[221972.122102] [drm] ring test succeeded in 1 usecs
[221972.122123] [drm] ib test succeeded in 0 usecs
[221972.198128] i8042 kbd 00:07: wake-up capability disabled by ACPI
[221972.204663] Extended CMOS year: 2000
[221972.312793] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[221972.387465] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[221972.596294] ata2.00: configured for UDMA/100
[221974.370555] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[221974.386170] ata1.00: configured for UDMA/100
[221974.411942] PM: resume of devices complete after 2336.171 msecs
[221974.412069] PM: Finishing wakeup.
[221974.412070] Restarting tasks ... done.
[221974.452231] video LNXVIDEO:02: Restoring backlight state
[221974.457071] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[221974.485327] usb 1-1.5: new high speed USB device number 13 using ehci_hcd
[221974.572776] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[221974.572786] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[221974.572795] usb 1-1.5: Product: USB2.0-CRW
[221974.572801] usb 1-1.5: Manufacturer: Generic
[221974.572807] usb 1-1.5: SerialNumber: 20071114173400000
[221974.592539] scsi14 : usb-storage 1-1.5:1.0
[221974.638240] usb 1-1.5: USB disconnect, device number 13
[221974.685418] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[221974.705370] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[221974.710779] r8169 0000:03:00.0: p1p1: link down
[221974.711532] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[221977.297274] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[221977.298660] wlan0: authenticated
[221977.299118] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[221977.301880] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=2)
[221977.301889] wlan0: associated
[221977.303909] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[221988.356653] wlan0: no IPv6 routers present
[222005.084468] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[222005.131621] cfg80211: Calling CRDA to update world regulatory domain
[222005.192382] cfg80211: World regulatory domain updated:
[222005.192385] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[222005.192389] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222005.192393] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[222005.192396] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[222005.192399] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222005.192402] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222005.192418] cfg80211: Calling CRDA for country: SE
[222005.196348] cfg80211: Regulatory domain changed to country: SE
[222005.196354] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[222005.196362] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[222005.196368] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[222005.196374] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[222005.196382] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[222005.326247] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[222005.332660] r8169 0000:03:00.0: p1p1: link down
[222005.333482] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[222007.916677] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[222007.918091] wlan0: authenticated
[222007.918670] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[222007.921429] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=2)
[222007.921433] wlan0: associated
[222007.922971] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[222019.327223] wlan0: no IPv6 routers present
[240165.303373] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[240165.344356] cfg80211: Calling CRDA to update world regulatory domain
[240165.371626] cfg80211: World regulatory domain updated:
[240165.371629] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[240165.371633] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[240165.371635] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[240165.371638] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[240165.371640] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[240165.371643] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[240165.371659] cfg80211: Calling CRDA for country: SE
[240165.375506] cfg80211: Regulatory domain changed to country: SE
[240165.375511] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[240165.375515] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[240165.375518] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[240165.375521] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[240165.375524] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[240166.852703] PM: Syncing filesystems ... done.
[240166.865481] PM: Preparing system for mem sleep
[240166.898844] Freezing user space processes ... (elapsed 0.01 seconds) done.
[240166.909980] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[240166.920944] PM: Entering mem sleep
[240166.921087] Suspending console(s) (use no_console_suspend to debug)
[240166.921709] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[240166.922535] sd 0:0:0:0: [sda] Stopping disk
[240167.002116] i8042 aux 00:08: wake-up capability disabled by ACPI
[240167.002132] i8042 kbd 00:07: wake-up capability enabled by ACPI
[240167.002254] HDA Intel 0000:01:00.1: PCI INT B disabled
[240167.002281] ACPI handle has no context!
[240167.002593] rt2800pci 0000:02:00.0: PCI INT A disabled
[240167.002600] ACPI handle has no context!
[240167.103668] HDA Intel 0000:00:1b.0: PCI INT A disabled
[240167.335123] radeon 0000:01:00.0: power state changed by ACPI to D3
[240167.380069] PM: suspend of devices complete after 459.560 msecs
[240167.380320] r8169 0000:03:00.0: PME# enabled
[240167.380353] r8169 0000:03:00.0: wake-up capability enabled by ACPI
[240167.413032] PM: late suspend of devices complete after 33.022 msecs
[240167.413366] ACPI: Preparing to enter system sleep state S3
[240167.488759] PM: Saving platform NVS memory
[240167.493692] Disabling non-boot CPUs ...
[240167.495832] CPU 1 is now offline
[240167.498004] CPU 2 is now offline
[240167.498874] Broke affinity for irq 21
[240167.499901] CPU 3 is now offline
[240167.500405] Extended CMOS year: 2000
[240167.500643] ACPI: Low-level resume complete
[240167.500709] PM: Restoring platform NVS memory
[240167.501345] Extended CMOS year: 2000
[240167.501370] Enabling non-boot CPUs ...
[240167.501521] Booting Node 0 Processor 1 APIC 0x1
[240167.501523] smpboot cpu 1: start_ip = 98000
[240167.591793] NMI watchdog enabled, takes one hw-pmu counter.
[240167.592154] CPU1 is up
[240167.592256] Booting Node 0 Processor 2 APIC 0x4
[240167.592258] smpboot cpu 2: start_ip = 98000
[240167.592394] Switched to NOHz mode on CPU #1
[240167.682718] NMI watchdog enabled, takes one hw-pmu counter.
[240167.683110] CPU2 is up
[240167.683199] Booting Node 0 Processor 3 APIC 0x5
[240167.683200] smpboot cpu 3: start_ip = 98000
[240167.683215] Switched to NOHz mode on CPU #2
[240167.774543] NMI watchdog enabled, takes one hw-pmu counter.
[240167.774997] CPU3 is up
[240167.777249] Switched to NOHz mode on CPU #3
[240167.777652] ACPI: Waking up from system sleep state S3
[240167.850362] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[240167.850496] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[240167.850530] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[240167.850588] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[240167.850688] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[240167.850779] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[240167.850862] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[240167.850915] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[240167.851030] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[240167.851039] r8169 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[240167.851058] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[240167.851219] PM: early resume of devices complete after 0.913 msecs
[240167.851349] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[240167.851401] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[240167.851451] ahci 0000:00:1f.2: setting latency timer to 64
[240167.851477] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[240167.851484] HDA Intel 0000:01:00.1: setting latency timer to 64
[240167.851514] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[240167.851546] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[240167.851685] pci 0000:00:1e.0: setting latency timer to 64
[240167.851696] sd 0:0:0:0: [sda] Starting disk
[240167.851872] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[240167.851888] HDA Intel 0000:00:1b.0: setting latency timer to 64
[240167.851938] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[240167.852563] radeon 0000:01:00.0: power state changed by ACPI to D0
[240167.852567] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[240167.852570] radeon 0000:01:00.0: power state changed by ACPI to D0
[240167.852575] r8169 0000:03:00.0: PME# disabled
[240167.852578] radeon 0000:01:00.0: setting latency timer to 64
[240167.878560] radeon 0000:01:00.0: WB enabled
[240167.895293] [drm] ring test succeeded in 1 usecs
[240167.895314] [drm] ib test succeeded in 0 usecs
[240167.971008] i8042 kbd 00:07: wake-up capability disabled by ACPI
[240167.978699] Extended CMOS year: 2000
[240168.082742] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[240168.155412] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[240168.364256] ata2.00: configured for UDMA/100
[240170.193334] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[240170.200020] ata1.00: configured for UDMA/100
[240170.225899] PM: resume of devices complete after 2379.304 msecs
[240170.226028] PM: Finishing wakeup.
[240170.226030] Restarting tasks ... done.
[240170.273502] video LNXVIDEO:02: Restoring backlight state
[240170.290289] usb 1-1.5: new high speed USB device number 14 using ehci_hcd
[240170.290929] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[240170.388090] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[240170.388095] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[240170.388098] usb 1-1.5: Product: USB2.0-CRW
[240170.388101] usb 1-1.5: Manufacturer: Generic
[240170.388103] usb 1-1.5: SerialNumber: 20071114173400000
[240170.406996] scsi15 : usb-storage 1-1.5:1.0
[240170.408918] usb 1-1.5: USB disconnect, device number 14
[240170.509746] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[240170.526739] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[240170.534361] r8169 0000:03:00.0: p1p1: link down
[240170.535673] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[240173.119148] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[240173.120596] wlan0: authenticated
[240173.121056] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[240173.123986] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[240173.123995] wlan0: associated
[240173.126748] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[240184.512825] wlan0: no IPv6 routers present
[240209.127020] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[240209.170128] cfg80211: Calling CRDA to update world regulatory domain
[240209.177241] cfg80211: World regulatory domain updated:
[240209.177245] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[240209.177248] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[240209.177251] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[240209.177254] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[240209.177257] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[240209.177261] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[240209.177275] cfg80211: Calling CRDA for country: SE
[240209.182968] cfg80211: Regulatory domain changed to country: SE
[240209.182975] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[240209.182982] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[240209.182988] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[240209.182994] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[240209.182999] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[240209.397531] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[240209.404869] r8169 0000:03:00.0: p1p1: link down
[240209.405959] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[240211.992943] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[240211.994427] wlan0: authenticated
[240211.994817] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[240211.997478] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[240211.997483] wlan0: associated
[240211.998619] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[240223.619303] wlan0: no IPv6 routers present
[260396.836389] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[260396.876542] cfg80211: Calling CRDA to update world regulatory domain
[260397.292443] cfg80211: World regulatory domain updated:
[260397.292446] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[260397.292450] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[260397.292452] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[260397.292455] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[260397.292457] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[260397.292460] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[260397.292471] cfg80211: Calling CRDA for country: SE
[260397.296142] cfg80211: Regulatory domain changed to country: SE
[260397.296146] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[260397.296149] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[260397.296152] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[260397.296155] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[260397.296157] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[260398.243916] PM: Syncing filesystems ... done.
[260398.259121] PM: Preparing system for mem sleep
[260398.721141] Freezing user space processes ... (elapsed 0.01 seconds) done.
[260398.732643] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[260398.743626] PM: Entering mem sleep
[260398.743771] Suspending console(s) (use no_console_suspend to debug)
[260398.744327] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[260398.744443] sd 0:0:0:0: [sda] Stopping disk
[260398.827296] i8042 aux 00:08: wake-up capability disabled by ACPI
[260398.827313] i8042 kbd 00:07: wake-up capability enabled by ACPI
[260398.827409] HDA Intel 0000:01:00.1: PCI INT B disabled
[260398.827439] ACPI handle has no context!
[260398.827681] HDA Intel 0000:00:1b.0: PCI INT A disabled
[260398.827731] rt2800pci 0000:02:00.0: PCI INT A disabled
[260398.827741] ACPI handle has no context!
[260399.235626] radeon 0000:01:00.0: power state changed by ACPI to D3
[260399.235730] PM: suspend of devices complete after 492.603 msecs
[260399.235963] r8169 0000:03:00.0: PME# enabled
[260399.235991] r8169 0000:03:00.0: wake-up capability enabled by ACPI
[260399.268620] PM: late suspend of devices complete after 32.949 msecs
[260399.268967] ACPI: Preparing to enter system sleep state S3
[260399.344367] PM: Saving platform NVS memory
[260399.349340] Disabling non-boot CPUs ...
[260399.351474] CPU 1 is now offline
[260399.353552] CPU 2 is now offline
[260399.354492] Broke affinity for irq 21
[260399.355519] CPU 3 is now offline
[260399.355994] Extended CMOS year: 2000
[260399.356230] ACPI: Low-level resume complete
[260399.356297] PM: Restoring platform NVS memory
[260399.356932] Extended CMOS year: 2000
[260399.356957] Enabling non-boot CPUs ...
[260399.357104] Booting Node 0 Processor 1 APIC 0x1
[260399.357105] smpboot cpu 1: start_ip = 98000
[260399.447364] NMI watchdog enabled, takes one hw-pmu counter.
[260399.447728] CPU1 is up
[260399.447828] Booting Node 0 Processor 2 APIC 0x4
[260399.447830] smpboot cpu 2: start_ip = 98000
[260399.447982] Switched to NOHz mode on CPU #1
[260399.538293] NMI watchdog enabled, takes one hw-pmu counter.
[260399.538650] CPU2 is up
[260399.538735] Booting Node 0 Processor 3 APIC 0x5
[260399.538737] smpboot cpu 3: start_ip = 98000
[260399.538801] Switched to NOHz mode on CPU #2
[260399.630124] NMI watchdog enabled, takes one hw-pmu counter.
[260399.630564] CPU3 is up
[260399.632813] Switched to NOHz mode on CPU #3
[260399.633252] ACPI: Waking up from system sleep state S3
[260399.706902] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[260399.707039] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[260399.707074] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[260399.707132] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[260399.707233] pci 0000:00:1e.0: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
[260399.707324] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[260399.707408] radeon 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[260399.707454] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
[260399.707574] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[260399.707583] r8169 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
[260399.707602] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[260399.707764] PM: early resume of devices complete after 0.917 msecs
[260399.707894] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[260399.707943] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[260399.707955] HDA Intel 0000:00:1b.0: setting latency timer to 64
[260399.708010] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[260399.708087] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[260399.708092] pci 0000:00:1e.0: setting latency timer to 64
[260399.708109] ahci 0000:00:1f.2: setting latency timer to 64
[260399.708171] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[260399.708177] HDA Intel 0000:01:00.1: setting latency timer to 64
[260399.708233] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[260399.708516] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[260399.708676] radeon 0000:01:00.0: power state changed by ACPI to D0
[260399.708680] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[260399.708686] sd 0:0:0:0: [sda] Starting disk
[260399.708689] radeon 0000:01:00.0: power state changed by ACPI to D0
[260399.708692] r8169 0000:03:00.0: PME# disabled
[260399.708700] radeon 0000:01:00.0: setting latency timer to 64
[260399.732521] radeon 0000:01:00.0: WB enabled
[260399.749119] [drm] ring test succeeded in 1 usecs
[260399.749138] [drm] ib test succeeded in 0 usecs
[260399.825565] i8042 kbd 00:07: wake-up capability disabled by ACPI
[260399.832476] Extended CMOS year: 2000
[260399.940291] usb 2-1.5: reset high speed USB device number 3 using ehci_hcd
[260400.012986] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[260400.219760] ata2.00: configured for UDMA/100
[260402.050950] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[260402.067100] ata1.00: configured for UDMA/100
[260402.092998] PM: resume of devices complete after 2389.879 msecs
[260402.093121] PM: Finishing wakeup.
[260402.093123] Restarting tasks ... done.
[260402.131902] video LNXVIDEO:02: Restoring backlight state
[260402.147295] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[260402.168765] usb 1-1.5: new high speed USB device number 15 using ehci_hcd
[260402.266571] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0158
[260402.266575] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[260402.266578] usb 1-1.5: Product: USB2.0-CRW
[260402.266580] usb 1-1.5: Manufacturer: Generic
[260402.266581] usb 1-1.5: SerialNumber: 20071114173400000
[260402.284783] scsi16 : usb-storage 1-1.5:1.0
[260402.380741] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[260402.397598] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[260402.402507] r8169 0000:03:00.0: p1p1: link down
[260402.403262] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[260402.521610] usb 1-1.5: USB disconnect, device number 15
[260404.999907] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[260405.001410] wlan0: authenticated
[260405.001895] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[260405.004707] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[260405.004711] wlan0: associated
[260405.005892] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[260416.148915] wlan0: no IPv6 routers present
[260422.226943] wlan0: deauthenticating from 40:4a:03:f9:c4:80 by local choice (reason=3)
[260422.275131] cfg80211: Calling CRDA to update world regulatory domain
[260422.287807] cfg80211: World regulatory domain updated:
[260422.287811] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[260422.287815] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[260422.287819] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[260422.287823] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[260422.287826] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[260422.287829] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[260422.287842] cfg80211: Calling CRDA for country: SE
[260422.292078] cfg80211: Regulatory domain changed to country: SE
[260422.292081] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[260422.292084] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[260422.292087] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[260422.292089] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[260422.292091] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[260422.489282] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[260422.497881] r8169 0000:03:00.0: p1p1: link down
[260422.499452] ADDRCONF(NETDEV_UP): p1p1: link is not ready
[260425.088371] wlan0: authenticate with 40:4a:03:f9:c4:80 (try 1)
[260425.089765] wlan0: authenticated
[260425.090245] wlan0: associate with 40:4a:03:f9:c4:80 (try 1)
[260425.093597] wlan0: RX AssocResp from 40:4a:03:f9:c4:80 (capab=0x431 status=0 aid=1)
[260425.093601] wlan0: associated
[260425.094722] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[260436.141191] wlan0: no IPv6 routers present
[272871.483073] usb 1-1.1: new high speed USB device number 16 using ehci_hcd
[272871.569111] usb 1-1.1: New USB device found, idVendor=04e8, idProduct=6014
[272871.569120] usb 1-1.1: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[272871.569127] usb 1-1.1: Product: Samsung G3 Station
[272871.569131] usb 1-1.1: Manufacturer: JMicron
[272871.569136] usb 1-1.1: SerialNumber: 00000011E09310C0042D
[272871.570557] scsi17 : usb-storage 1-1.1:1.0
[272872.591038] scsi 17:0:0:0: Direct-Access Samsung G3 Station PQ: 0 ANSI: 2 CCS
[272872.594931] sd 17:0:0:0: Attached scsi generic sg2 type 0
[272872.595468] sd 17:0:0:0: [sdb] 3907028992 512-byte logical blocks: (2.00 TB/1.81 TiB)
[272872.596486] sd 17:0:0:0: [sdb] Write Protect is off
[272872.596494] sd 17:0:0:0: [sdb] Mode Sense: 28 00 00 00
[272872.597363] sd 17:0:0:0: [sdb] No Caching mode page present
[272872.597370] sd 17:0:0:0: [sdb] Assuming drive cache: write through
[272872.602188] sd 17:0:0:0: [sdb] No Caching mode page present
[272872.602197] sd 17:0:0:0: [sdb] Assuming drive cache: write through
[272872.609610] sdb: sdb1
[272872.612690] sd 17:0:0:0: [sdb] No Caching mode page present
[272872.612697] sd 17:0:0:0: [sdb] Assuming drive cache: write through
[272872.612703] sd 17:0:0:0: [sdb] Attached SCSI disk
[272916.391619] usb 1-1.1: USB disconnect, device number 16
[272974.278945] usb 1-1.1: new high speed USB device number 17 using ehci_hcd
[272974.364981] usb 1-1.1: New USB device found, idVendor=04e8, idProduct=6014
[272974.364990] usb 1-1.1: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[272974.364997] usb 1-1.1: Product: Samsung G3 Station
[272974.365001] usb 1-1.1: Manufacturer: JMicron
[272974.365006] usb 1-1.1: SerialNumber: 00000011E09310C0042D
[272974.366453] scsi18 : usb-storage 1-1.1:1.0
[272975.386764] scsi 18:0:0:0: Direct-Access Samsung G3 Station PQ: 0 ANSI: 2 CCS
[272975.398921] sd 18:0:0:0: Attached scsi generic sg2 type 0
[272975.399442] sd 18:0:0:0: [sdb] 3907028992 512-byte logical blocks: (2.00 TB/1.81 TiB)
[272975.400312] sd 18:0:0:0: [sdb] Write Protect is off
[272975.400320] sd 18:0:0:0: [sdb] Mode Sense: 28 00 00 00
[272975.401147] sd 18:0:0:0: [sdb] No Caching mode page present
[272975.401155] sd 18:0:0:0: [sdb] Assuming drive cache: write through
[272975.405947] sd 18:0:0:0: [sdb] No Caching mode page present
[272975.405955] sd 18:0:0:0: [sdb] Assuming drive cache: write through
[272975.413335] sdb: sdb1
[272975.416131] sd 18:0:0:0: [sdb] No Caching mode page present
[272975.416141] sd 18:0:0:0: [sdb] Assuming drive cache: write through
[272975.416151] sd 18:0:0:0: [sdb] Attached SCSI disk
[273009.904827] usb 1-1.1: USB disconnect, device number 17
[273085.059062] usb 1-1.1: new high speed USB device number 18 using ehci_hcd
[273085.145008] usb 1-1.1: New USB device found, idVendor=04e8, idProduct=6014
[273085.145016] usb 1-1.1: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[273085.145023] usb 1-1.1: Product: Samsung G3 Station
[273085.145027] usb 1-1.1: Manufacturer: JMicron
[273085.145032] usb 1-1.1: SerialNumber: 00000011E09310C0042D
[273085.146367] scsi19 : usb-storage 1-1.1:1.0
[273086.167044] scsi 19:0:0:0: Direct-Access Samsung G3 Station PQ: 0 ANSI: 2 CCS
[273086.172224] sd 19:0:0:0: Attached scsi generic sg2 type 0
[273086.172768] sd 19:0:0:0: [sdb] 3907028992 512-byte logical blocks: (2.00 TB/1.81 TiB)
[273086.173721] sd 19:0:0:0: [sdb] Write Protect is off
[273086.173731] sd 19:0:0:0: [sdb] Mode Sense: 28 00 00 00
[273086.174739] sd 19:0:0:0: [sdb] No Caching mode page present
[273086.174749] sd 19:0:0:0: [sdb] Assuming drive cache: write through
[273086.179065] sd 19:0:0:0: [sdb] No Caching mode page present
[273086.179073] sd 19:0:0:0: [sdb] Assuming drive cache: write through
[273086.183240] sdb: sdb1
[273086.186097] sd 19:0:0:0: [sdb] No Caching mode page present
[273086.186104] sd 19:0:0:0: [sdb] Assuming drive cache: write through
[273086.186111] sd 19:0:0:0: [sdb] Attached SCSI disk
[273113.623131] usb 1-1.1: USB disconnect, device number 18
[273208.813520] usb 1-1.1: new high speed USB device number 19 using ehci_hcd
[273208.899246] usb 1-1.1: New USB device found, idVendor=04e8, idProduct=6014
[273208.899257] usb 1-1.1: New USB device strings: Mfr=1, Product=11, SerialNumber=3
[273208.899265] usb 1-1.1: Product: Samsung G3 Station
[273208.899271] usb 1-1.1: Manufacturer: JMicron
[273208.899277] usb 1-1.1: SerialNumber: 00000011E09310C0042D
[273208.905625] scsi20 : usb-storage 1-1.1:1.0
[273209.925442] scsi 20:0:0:0: Direct-Access Samsung G3 Station PQ: 0 ANSI: 2 CCS
[273209.929275] sd 20:0:0:0: Attached scsi generic sg2 type 0
[273209.929887] sd 20:0:0:0: [sdb] 3907028992 512-byte logical blocks: (2.00 TB/1.81 TiB)
[273209.931102] sd 20:0:0:0: [sdb] Write Protect is off
[273209.931110] sd 20:0:0:0: [sdb] Mode Sense: 28 00 00 00
[273209.932030] sd 20:0:0:0: [sdb] No Caching mode page present
[273209.932039] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[273209.934958] sd 20:0:0:0: [sdb] No Caching mode page present
[273209.934968] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[273209.944253] sdb: sdb1
[273209.946920] sd 20:0:0:0: [sdb] No Caching mode page present
[273209.946928] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[273209.946934] sd 20:0:0:0: [sdb] Attached SCSI disk
[273234.665661] usb 1-1.1: USB disconnect, device number 19