dmesg - OpenSUSE12.1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1.1-desktop (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Tue Oct 25 17:33:27 UTC 2011 (68289aa)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1.1-desktop root=/dev/disk/by-id/ata-OCZ-VERTEX2_OCZ-561890U87L25E0Z8-part5 splash=silent quiet showopts vga=0x317
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A79T Deluxe, BIOS 1303 06/10/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfe90000 page 4k
[ 0.000000] kernel direct mapping tables up to cfe90000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ cfe8e000-cfe90000
[ 0.000000] RAMDISK: 37597000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb890 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cfe90000 00038 (v01 061009 RSDT1341 20090610 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cfe90200 00084 (v01 061009 FACP1341 20090610 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 - not using it (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 00000000cfe90440 0E5A8 (v01 A1160 A1160000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cfea8000 00040
[ 0.000000] ACPI: APIC 00000000cfe90390 0006C (v01 061009 APIC1341 20090610 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cfe90400 0003C (v01 061009 OEMMCFG 20090610 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 061009 OEMB1341 20090610 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cfe9f440 00038 (v01 061009 OEMHPET 20090610 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022ffec000 - 000000022fffffff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880227600000-ffff88022e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfe90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096671
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833224 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000
[ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000
[ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fc00000 s78208 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s78208 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065306
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1.1-desktop root=/dev/disk/by-id/ata-OCZ-VERTEX2_OCZ-561890U87L25E0Z8-part5 splash=silent quiet showopts vga=0x317
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 54bc000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8110864k/9175040k available (5787k kernel code, 788356k absent, 275820k reserved, 7780k data, 940k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3210.454 MHz processor.
[ 0.002002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6420.90 BogoMIPS (lpj=3210454)
[ 0.002005] pid_max: default: 32768 minimum: 301
[ 0.002038] Security Framework initialized
[ 0.002049] AppArmor: AppArmor initialized
[ 0.002549] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004770] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005710] Mount-cache hash table entries: 256
[ 0.005796] Initializing cgroup subsys cpuacct
[ 0.005799] Initializing cgroup subsys memory
[ 0.005812] Initializing cgroup subsys devices
[ 0.005814] Initializing cgroup subsys freezer
[ 0.005815] Initializing cgroup subsys net_cls
[ 0.005817] Initializing cgroup subsys blkio
[ 0.005822] Initializing cgroup subsys perf_event
[ 0.005842] tseg: 0000000000
[ 0.005850] CPU: Physical Processor ID: 0
[ 0.005851] CPU: Processor Core ID: 0
[ 0.005852] mce: CPU supports 6 MCE banks
[ 0.005859] using AMD E400 aware idle routine
[ 0.006329] ACPI: Core revision 20110623
[ 0.011338] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.021356] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.021998] Performance Events: AMD PMU driver.
[ 0.021998] ... version: 0
[ 0.021998] ... bit width: 48
[ 0.021998] ... generic registers: 4
[ 0.021998] ... value mask: 0000ffffffffffff
[ 0.021998] ... max period: 00007fffffffffff
[ 0.021998] ... fixed-purpose events: 0
[ 0.021998] ... event mask: 000000000000000f
[ 0.029305] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.037024] Booting Node 0, Processors #1
[ 0.037027] smpboot cpu 1: start_ip = 9a000
[ 0.109018] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.115022] #2
[ 0.115024] smpboot cpu 2: start_ip = 9a000
[ 0.187012] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.193009] #3 Ok.
[ 0.193011] smpboot cpu 3: start_ip = 9a000
[ 0.265006] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.266984] Brought up 4 CPUs
[ 0.266987] Total of 4 processors activated (25686.62 BogoMIPS).
[ 0.268058] devtmpfs: initialized
[ 0.269655] PM: Registering ACPI NVS region at cfea8000 (163840 bytes)
[ 0.269655] print_constraints: dummy:
[ 0.269655] RTC time: 23:04:17, date: 11/12/11
[ 0.269655] NET: Registered protocol family 16
[ 0.269655] node 0 link 0: io port [1000, ffffff]
[ 0.269655] TOM: 00000000d0000000 aka 3328M
[ 0.269655] Fam 10h mmconf [e0000000, efffffff]
[ 0.269655] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.269655] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.269655] node 0 link 0: mmio [a0000, bffff]
[ 0.269655] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.269655] TOM2: 0000000230000000 aka 8960M
[ 0.269655] bus: [00, 07] on node 0 link 0
[ 0.269971] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.269972] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
[ 0.269974] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.269975] bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
[ 0.269976] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.269986] Extended Config Space enabled on 1 nodes
[ 0.270050] ACPI: bus type pci registered
[ 0.270093] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.270095] PCI: not using MMCONFIG
[ 0.270096] PCI: Using configuration type 1 for base access
[ 0.270097] PCI: Using configuration type 1 for extended access
[ 0.270222] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.270223] mtrr: probably your BIOS does not setup all CPUs.
[ 0.270224] mtrr: corrected configuration.
[ 0.270724] bio: create slab at 0
[ 0.270724] ACPI: Added _OSI(Module Device)
[ 0.270724] ACPI: Added _OSI(Processor Device)
[ 0.270724] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.270724] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.271943] ACPI: EC: Look up EC in DSDT
[ 0.273708] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.302428] ACPI: Interpreter enabled
[ 0.302432] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.302453] ACPI: Using IOAPIC for interrupt routing
[ 0.302474] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.303640] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.348845] ACPI: No dock devices found.
[ 0.348847] HEST: Table not found.
[ 0.348849] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.348935] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.349108] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.349110] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.349112] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.349114] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.349115] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
[ 0.349117] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.349129] pci 0000:00:00.0: [1002:5956] type 0 class 0x000600
[ 0.349141] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.349171] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.349196] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.349199] pci 0000:00:02.0: PME# disabled
[ 0.349217] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
[ 0.349241] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.349243] pci 0000:00:07.0: PME# disabled
[ 0.349274] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.349293] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
[ 0.349302] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
[ 0.349312] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
[ 0.349321] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
[ 0.349330] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
[ 0.349340] pci 0000:00:11.0: reg 24: [mem 0xf7dfe400-0xf7dfe7ff]
[ 0.349360] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.349396] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.349409] pci 0000:00:12.0: reg 10: [mem 0xf7df6000-0xf7df6fff]
[ 0.349473] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.349486] pci 0000:00:12.1: reg 10: [mem 0xf7df7000-0xf7df7fff]
[ 0.349555] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.349574] pci 0000:00:12.2: reg 10: [mem 0xf7dfe800-0xf7dfe8ff]
[ 0.349645] pci 0000:00:12.2: supports D1 D2
[ 0.349646] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.349649] pci 0000:00:12.2: PME# disabled
[ 0.349670] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.349683] pci 0000:00:13.0: reg 10: [mem 0xf7dfc000-0xf7dfcfff]
[ 0.349747] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.349760] pci 0000:00:13.1: reg 10: [mem 0xf7dfd000-0xf7dfdfff]
[ 0.349829] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.349848] pci 0000:00:13.2: reg 10: [mem 0xf7dfec00-0xf7dfecff]
[ 0.349918] pci 0000:00:13.2: supports D1 D2
[ 0.349920] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.349923] pci 0000:00:13.2: PME# disabled
[ 0.349964] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.350057] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.350073] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.350083] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.350092] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.350101] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.350110] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.350160] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.350181] pci 0000:00:14.2: reg 10: [mem 0xf7df8000-0xf7dfbfff 64bit]
[ 0.350239] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.350243] pci 0000:00:14.2: PME# disabled
[ 0.350255] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.350330] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.350370] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.350383] pci 0000:00:14.5: reg 10: [mem 0xf7dff000-0xf7dfffff]
[ 0.350450] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.350466] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.350481] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.350494] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.350510] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.350562] pci 0000:03:00.0: [10de:0e22] type 0 class 0x000300
[ 0.350572] pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff]
[ 0.350582] pci 0000:03:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.350593] pci 0000:03:00.0: reg 1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 0.350600] pci 0000:03:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.350607] pci 0000:03:00.0: reg 30: [mem 0xfbf00000-0xfbf7ffff pref]
[ 0.350650] pci 0000:03:00.1: [10de:0beb] type 0 class 0x000403
[ 0.350659] pci 0000:03:00.1: reg 10: [mem 0xfbffc000-0xfbffffff]
[ 0.351974] pci 0000:00:02.0: PCI bridge to [bus 03-03]
[ 0.351979] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.351981] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.351985] pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.352038] pci 0000:02:00.0: [1106:3403] type 0 class 0x000c00
[ 0.352068] pci 0000:02:00.0: reg 10: [mem 0xf7fff800-0xf7ffffff 64bit]
[ 0.352083] pci 0000:02:00.0: reg 18: [io 0xd800-0xd8ff]
[ 0.352183] pci 0000:02:00.0: supports D2
[ 0.352185] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.352190] pci 0000:02:00.0: PME# disabled
[ 0.353977] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.353981] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.353983] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.354024] pci 0000:01:06.0: [10ec:8139] type 0 class 0x000200
[ 0.354045] pci 0000:01:06.0: reg 10: [io 0xc800-0xc8ff]
[ 0.354057] pci 0000:01:06.0: reg 14: [mem 0xf7effc00-0xf7effcff]
[ 0.354135] pci 0000:01:06.0: supports D1 D2
[ 0.354136] pci 0000:01:06.0: PME# supported from D1 D2 D3hot
[ 0.354141] pci 0000:01:06.0: PME# disabled
[ 0.354187] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.354191] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.354194] pci 0000:00:14.4: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.354198] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.354200] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.354202] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.354203] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.354205] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[ 0.354207] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.354221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.354414] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.354448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.354493] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.354551] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.354553] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.354554] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.359119] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.359156] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.359192] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[ 0.359227] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.359262] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.359297] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
[ 0.359331] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.359367] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.359406] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.359406] vgaarb: loaded
[ 0.359406] vgaarb: bridge control possible 0000:03:00.0
[ 0.359406] SCSI subsystem initialized
[ 0.359406] libata version 3.00 loaded.
[ 0.359406] usbcore: registered new interface driver usbfs
[ 0.359406] usbcore: registered new interface driver hub
[ 0.359406] usbcore: registered new device driver usb
[ 0.359406] PCI: Using ACPI for IRQ routing
[ 0.368807] PCI: pci_cache_line_size set to 64 bytes
[ 0.368813] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.368883] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.368885] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
[ 0.368960] NetLabel: Initializing
[ 0.368961] NetLabel: domain hash size = 128
[ 0.368962] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.368971] NetLabel: unlabeled traffic allowed by default
[ 0.368979] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.368982] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.370977] Switching to clocksource hpet
[ 0.371807] Switched to NOHz mode on CPU #0
[ 0.371891] Switched to NOHz mode on CPU #2
[ 0.371898] Switched to NOHz mode on CPU #1
[ 0.371901] Switched to NOHz mode on CPU #3
[ 0.372861] AppArmor: AppArmor Filesystem Enabled
[ 0.372875] pnp: PnP ACPI init
[ 0.372885] ACPI: bus type pnp registered
[ 0.372983] pnp 00:00: [bus 00-ff]
[ 0.372985] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.372987] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.372988] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.372990] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.372992] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.372993] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
[ 0.372995] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.373042] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.373081] pnp 00:01: [dma 4]
[ 0.373082] pnp 00:01: [io 0x0000-0x000f]
[ 0.373083] pnp 00:01: [io 0x0081-0x0083]
[ 0.373085] pnp 00:01: [io 0x0087]
[ 0.373086] pnp 00:01: [io 0x0089-0x008b]
[ 0.373087] pnp 00:01: [io 0x008f]
[ 0.373089] pnp 00:01: [io 0x00c0-0x00df]
[ 0.373106] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.373115] pnp 00:02: [io 0x0070-0x0071]
[ 0.373122] pnp 00:02: [irq 8]
[ 0.373139] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.373146] pnp 00:03: [io 0x0061]
[ 0.373163] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.373170] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.373173] pnp 00:04: [irq 13]
[ 0.373190] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.373224] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.373243] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.373321] pnp 00:06: [mem 0xfec00000-0xfec00fff]
[ 0.373322] pnp 00:06: [mem 0xfee00000-0xfee00fff]
[ 0.373357] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.373359] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.373361] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373496] pnp 00:07: [io 0x0010-0x001f]
[ 0.373498] pnp 00:07: [io 0x0022-0x003f]
[ 0.373499] pnp 00:07: [io 0x0062-0x0063]
[ 0.373501] pnp 00:07: [io 0x0065-0x006f]
[ 0.373502] pnp 00:07: [io 0x0072-0x007f]
[ 0.373503] pnp 00:07: [io 0x0080]
[ 0.373505] pnp 00:07: [io 0x0084-0x0086]
[ 0.373506] pnp 00:07: [io 0x0088]
[ 0.373507] pnp 00:07: [io 0x008c-0x008e]
[ 0.373509] pnp 00:07: [io 0x0090-0x009f]
[ 0.373510] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.373511] pnp 00:07: [io 0x00b1]
[ 0.373512] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.373514] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.373515] pnp 00:07: [io 0x040b]
[ 0.373516] pnp 00:07: [io 0x04d6]
[ 0.373518] pnp 00:07: [io 0x0c00-0x0c01]
[ 0.373519] pnp 00:07: [io 0x0c14]
[ 0.373520] pnp 00:07: [io 0x0c50-0x0c51]
[ 0.373522] pnp 00:07: [io 0x0c52]
[ 0.373523] pnp 00:07: [io 0x0c6c]
[ 0.373524] pnp 00:07: [io 0x0c6f]
[ 0.373525] pnp 00:07: [io 0x0cd0-0x0cd1]
[ 0.373526] pnp 00:07: [io 0x0cd2-0x0cd3]
[ 0.373529] pnp 00:07: [io 0x0cd4-0x0cd5]
[ 0.373530] pnp 00:07: [io 0x0cd6-0x0cd7]
[ 0.373531] pnp 00:07: [io 0x0cd8-0x0cdf]
[ 0.373533] pnp 00:07: [io 0x0b00-0x0b3f]
[ 0.373534] pnp 00:07: [io 0x0800-0x089f]
[ 0.373535] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.373537] pnp 00:07: [io 0x0b00-0x0b0f]
[ 0.373538] pnp 00:07: [io 0x0b20-0x0b3f]
[ 0.373540] pnp 00:07: [io 0x0900-0x090f]
[ 0.373541] pnp 00:07: [io 0x0910-0x091f]
[ 0.373542] pnp 00:07: [io 0xfe00-0xfefe]
[ 0.373544] pnp 00:07: [io 0x0060-0x005f disabled]
[ 0.373545] pnp 00:07: [io 0x0064-0x0063 disabled]
[ 0.373547] pnp 00:07: [mem 0xffb80000-0xffbfffff]
[ 0.373548] pnp 00:07: [mem 0xfec10000-0xfec1001f]
[ 0.373606] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.373608] system 00:07: [io 0x040b] has been reserved
[ 0.373610] system 00:07: [io 0x04d6] has been reserved
[ 0.373612] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.373613] system 00:07: [io 0x0c14] has been reserved
[ 0.373615] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.373617] system 00:07: [io 0x0c52] has been reserved
[ 0.373619] system 00:07: [io 0x0c6c] has been reserved
[ 0.373621] system 00:07: [io 0x0c6f] has been reserved
[ 0.373622] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
[ 0.373624] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
[ 0.373626] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.373628] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.373630] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.373632] system 00:07: [io 0x0b00-0x0b3f] has been reserved
[ 0.373634] system 00:07: [io 0x0800-0x089f] has been reserved
[ 0.373636] system 00:07: [io 0x0b00-0x0b0f] has been reserved
[ 0.373638] system 00:07: [io 0x0b20-0x0b3f] has been reserved
[ 0.373639] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.373641] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.373643] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.373646] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.373648] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.373650] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.374177] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.374181] pnp 00:08: [irq 4]
[ 0.374182] pnp 00:08: [dma 0 disabled]
[ 0.374250] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.374797] pnp 00:09: [io 0x03f0-0x03f5]
[ 0.374798] pnp 00:09: [io 0x03f7]
[ 0.374802] pnp 00:09: [irq 6]
[ 0.374803] pnp 00:09: [dma 2]
[ 0.374841] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.374864] pnp 00:0a: [io 0x0060]
[ 0.374865] pnp 00:0a: [io 0x0064]
[ 0.374868] pnp 00:0a: [irq 1]
[ 0.374893] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.374930] pnp 00:0b: [irq 12]
[ 0.374954] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.375116] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
[ 0.375118] pnp 00:0c: [io 0x0230-0x023f]
[ 0.375119] pnp 00:0c: [io 0x0290-0x029f]
[ 0.375120] pnp 00:0c: [io 0x0f40-0x0f4f]
[ 0.375122] pnp 00:0c: [io 0x0a30-0x0a3f]
[ 0.375154] system 00:0c: [io 0x0230-0x023f] has been reserved
[ 0.375156] system 00:0c: [io 0x0290-0x029f] has been reserved
[ 0.375158] system 00:0c: [io 0x0f40-0x0f4f] has been reserved
[ 0.375160] system 00:0c: [io 0x0a30-0x0a3f] has been reserved
[ 0.375162] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.375194] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.375225] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.375227] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.432166] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.432168] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.432170] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.432171] pnp 00:0e: [mem 0x00100000-0xcfefffff]
[ 0.432173] pnp 00:0e: [mem 0xfec00000-0xffffffff]
[ 0.432177] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.432179] pnp 00:0e: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.432182] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.432184] pnp 00:0e: disabling [mem 0x00100000-0xcfefffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.432239] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.432242] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.432345] pnp: PnP ACPI: found 15 devices
[ 0.432346] ACPI: ACPI bus type pnp unregistered
[ 0.438938] PCI: max bus depth: 1 pci_try_num: 2
[ 0.438953] pci 0000:00:02.0: PCI bridge to [bus 03-03]
[ 0.438955] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.438958] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.438961] pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.438964] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.438966] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.438968] pci 0000:00:07.0: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.438972] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[ 0.438975] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.438979] pci 0000:00:14.4: bridge window [mem 0xf7e00000-0xf7efffff]
[ 0.438996] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.439008] pci 0000:00:02.0: setting latency timer to 64
[ 0.439015] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.439017] pci 0000:00:07.0: setting latency timer to 64
[ 0.439023] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.439025] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.439026] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.439028] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.439029] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.439031] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.439033] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.439034] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.439036] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.439037] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.439039] pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.439041] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.439042] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[ 0.439044] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.439045] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.439047] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.439048] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.439050] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.439051] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.439142] NET: Registered protocol family 2
[ 0.439313] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.440334] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.442243] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.442473] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.442475] TCP reno registered
[ 0.442487] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.442531] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.442669] NET: Registered protocol family 1
[ 0.570057] pci 0000:03:00.0: Boot video device
[ 0.570074] PCI: CLS 64 bytes, default 64
[ 0.570112] Unpacking initramfs...
[ 0.702786] Freeing initrd memory: 10596k freed
[ 0.706264] PCI-DMA: Disabling AGP.
[ 0.706336] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.706338] PCI-DMA: using GART IOMMU.
[ 0.706340] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.709674] audit: initializing netlink socket (disabled)
[ 0.709685] type=2000 audit(1321139057.708:1): initialized
[ 0.739079] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.769447] VFS: Disk quotas dquot_6.5.2
[ 0.769480] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.769751] msgmni has been set to 15991
[ 0.769956] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.769987] io scheduler noop registered
[ 0.769988] io scheduler deadline registered
[ 0.770027] io scheduler cfq registered (default)
[ 0.770165] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.770199] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.770289] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.770310] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 0.770406] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 0.770407] vesafb: scrolling: redraw
[ 0.770409] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.770535] vesafb: framebuffer at 0xd5000000, mapped to 0xffffc90011800000, using 1536k, total 1536k
[ 0.770655] bootsplash 3.2.0-2010/03/31: looking for picture...
[ 0.770657] bootsplash: silentjpeg size 89863 bytes
[ 0.777072] bootsplash: ...found (1024x768, 36220 bytes, v3).
[ 0.797104] Console: switching to colour frame buffer device 124x44
[ 0.816771] fb0: VESA VGA frame buffer device
[ 0.816809] ERST: Table is not found!
[ 0.816811] GHES: HEST is not enabled!
[ 0.837510] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.981740] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.990269] Non-volatile memory driver v1.3
[ 0.990271] Linux agpgart interface v0.103
[ 0.990386] ahci 0000:00:11.0: version 3.0
[ 0.990401] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.990441] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
[ 0.990511] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.990513] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.990872] scsi0 : ahci
[ 0.990955] scsi1 : ahci
[ 0.991020] scsi2 : ahci
[ 0.991068] scsi3 : ahci
[ 0.991145] ata1: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe500 irq 42
[ 0.991148] ata2: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe580 irq 42
[ 0.991151] ata3: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe600 irq 42
[ 0.991154] ata4: SATA max UDMA/133 abar m1024@0xf7dfe400 port 0xf7dfe680 irq 42
[ 0.991244] Fixed MDIO Bus: probed
[ 0.991249] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.991297] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.991309] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.991326] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.991333] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.991356] ehci_hcd 0000:00:12.2: debug port 1
[ 0.991373] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7dfe800
[ 0.997026] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.997043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.997044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.997046] usb usb1: Product: EHCI Host Controller
[ 0.997047] usb usb1: Manufacturer: Linux 3.1.0-1.1-desktop ehci_hcd
[ 0.997048] usb usb1: SerialNumber: 0000:00:12.2
[ 0.997141] hub 1-0:1.0: USB hub found
[ 0.997143] hub 1-0:1.0: 6 ports detected
[ 0.997267] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.997279] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.997285] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.997293] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.997311] ehci_hcd 0000:00:13.2: debug port 1
[ 0.997331] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf7dfec00
[ 1.003033] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.003045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.003047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.003049] usb usb2: Product: EHCI Host Controller
[ 1.003050] usb usb2: Manufacturer: Linux 3.1.0-1.1-desktop ehci_hcd
[ 1.003051] usb usb2: SerialNumber: 0000:00:13.2
[ 1.003121] hub 2-0:1.0: USB hub found
[ 1.003123] hub 2-0:1.0: 6 ports detected
[ 1.003200] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.003264] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.003277] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.003283] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.003304] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf7df6000
[ 1.058054] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.058056] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.058057] usb usb3: Product: OHCI Host Controller
[ 1.058058] usb usb3: Manufacturer: Linux 3.1.0-1.1-desktop ohci_hcd
[ 1.058060] usb usb3: SerialNumber: 0000:00:12.0
[ 1.058144] hub 3-0:1.0: USB hub found
[ 1.058149] hub 3-0:1.0: 3 ports detected
[ 1.058266] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.058277] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.058284] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.058298] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf7df7000
[ 1.113051] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.113053] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.113055] usb usb4: Product: OHCI Host Controller
[ 1.113056] usb usb4: Manufacturer: Linux 3.1.0-1.1-desktop ohci_hcd
[ 1.113058] usb usb4: SerialNumber: 0000:00:12.1
[ 1.113143] hub 4-0:1.0: USB hub found
[ 1.113148] hub 4-0:1.0: 3 ports detected
[ 1.113261] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.113274] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.113280] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.113301] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7dfc000
[ 1.168053] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.168055] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.168057] usb usb5: Product: OHCI Host Controller
[ 1.168058] usb usb5: Manufacturer: Linux 3.1.0-1.1-desktop ohci_hcd
[ 1.168059] usb usb5: SerialNumber: 0000:00:13.0
[ 1.168145] hub 5-0:1.0: USB hub found
[ 1.168150] hub 5-0:1.0: 3 ports detected
[ 1.168264] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.168275] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.168281] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.168295] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf7dfd000
[ 1.223059] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.223061] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.223063] usb usb6: Product: OHCI Host Controller
[ 1.223064] usb usb6: Manufacturer: Linux 3.1.0-1.1-desktop ohci_hcd
[ 1.223065] usb usb6: SerialNumber: 0000:00:13.1
[ 1.223149] hub 6-0:1.0: USB hub found
[ 1.223154] hub 6-0:1.0: 3 ports detected
[ 1.223267] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.223279] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.223286] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.223300] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7dff000
[ 1.278047] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.278049] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.278050] usb usb7: Product: OHCI Host Controller
[ 1.278052] usb usb7: Manufacturer: Linux 3.1.0-1.1-desktop ohci_hcd
[ 1.278053] usb usb7: SerialNumber: 0000:00:14.5
[ 1.278140] hub 7-0:1.0: USB hub found
[ 1.278145] hub 7-0:1.0: 2 ports detected
[ 1.278214] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.278243] Initializing USB Mass Storage driver...
[ 1.278268] usbcore: registered new interface driver usb-storage
[ 1.278269] USB Mass Storage support registered.
[ 1.278276] usbcore: registered new interface driver ums-alauda
[ 1.278283] usbcore: registered new interface driver ums-cypress
[ 1.278290] usbcore: registered new interface driver ums-datafab
[ 1.278296] usbcore: registered new interface driver ums-freecom
[ 1.278302] usbcore: registered new interface driver ums-isd200
[ 1.278309] usbcore: registered new interface driver ums-jumpshot
[ 1.278317] usbcore: registered new interface driver ums-karma
[ 1.278324] usbcore: registered new interface driver ums-onetouch
[ 1.278331] usbcore: registered new interface driver ums-sddr09
[ 1.278337] usbcore: registered new interface driver ums-sddr55
[ 1.278344] usbcore: registered new interface driver ums-usbat
[ 1.278372] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.278747] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.278761] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.278876] mousedev: PS/2 mouse device common for all mice
[ 1.278951] rtc_cmos 00:02: RTC can wake from S4
[ 1.279066] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.279088] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.279098] cpuidle: using governor ladder
[ 1.279099] cpuidle: using governor menu
[ 1.279100] EFI Variables Facility v0.08 2004-May-17
[ 1.279249] usbcore: registered new interface driver usbhid
[ 1.279250] usbhid: USB HID core driver
[ 1.279393] TCP cubic registered
[ 1.279456] NET: Registered protocol family 10
[ 1.279802] lib80211: common routines for IEEE802.11 drivers
[ 1.279804] lib80211_crypt: registered algorithm 'NULL'
[ 1.279805] Registering the dns_resolver key type
[ 1.279817] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[ 1.279908] PM: Hibernation image not present or could not be loaded.
[ 1.279917] registered taskstats version 1
[ 1.295503] Magic number: 3:885:99
[ 1.295602] rtc_cmos 00:02: setting system clock to 2011-11-12 23:04:18 UTC (1321139058)
[ 1.311253] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.453042] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.453068] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.453090] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.453109] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.454143] ata3.00: HPA detected: current 976771055, native 976773168
[ 1.454147] ata3.00: ATA-8: ST3500418AS, CC37, max UDMA/133
[ 1.454149] ata3.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.455363] ata3.00: configured for UDMA/133
[ 1.459450] ata4.00: ATA-7: SAMSUNG HD322HJ, 1AC01118, max UDMA7
[ 1.459452] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.459467] ata2.00: ATA-7: SAMSUNG HD322HJ, 1AC01118, max UDMA7
[ 1.459470] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.465904] ata4.00: configured for UDMA/133
[ 1.465926] ata2.00: configured for UDMA/133
[ 1.497206] ata1.00: ATA-8: OCZ-VERTEX2, 1.28, max UDMA/133
[ 1.497208] ata1.00: 224674128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.527215] ata1.00: configured for UDMA/133
[ 1.527362] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.28 PQ: 0 ANSI: 5
[ 1.527578] sd 0:0:0:0: [sda] 224674128 512-byte logical blocks: (115 GB/107 GiB)
[ 1.527597] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5
[ 1.527677] sd 0:0:0:0: [sda] Write Protect is off
[ 1.527679] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.527703] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.527753] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.527779] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5
[ 1.527781] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.527784] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.527848] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.527872] sd 2:0:0:0: [sdc] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 1.527944] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.527946] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.527962] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.527991] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5
[ 1.528097] sd 3:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.528168] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.528170] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.528196] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.528571] sda: sda1 < sda5 sda6 > sda3 sda4
[ 1.528898] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.533404] sdb: sdb1
[ 1.533644] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.556580] sdd: sdd1 sdd2 sdd3 sdd4
[ 1.556911] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.568387] sdc: sdc1 sdc2
[ 1.568662] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.569680] Freeing unused kernel memory: 940k freed
[ 1.569849] Write protecting the kernel read-only data: 12288k
[ 1.570777] Freeing unused kernel memory: 340k freed
[ 1.575454] Freeing unused kernel memory: 2020k freed
[ 1.599601] udevd[134]: starting version 173
[ 1.608754] ACPI: acpi_idle registered with cpuidle
[ 1.611615] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.613398] ACPI: Power Button [PWRB]
[ 1.613437] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.613846] ACPI: Power Button [PWRF]
[ 1.614805] wmi: Mapper loaded
[ 1.617229] [drm] Initialized drm 1.1.0 20060810
[ 1.622963] nouveau 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.622969] nouveau 0000:03:00.0: setting latency timer to 64
[ 1.623926] [drm] nouveau 0000:03:00.0: Detected an NVc0 generation card (0x0c4100a1)
[ 1.623930] checking generic (d5000000 180000) vs hw (d8000000 8000000)
[ 1.623931] checking generic (d5000000 180000) vs hw (d4000000 4000000)
[ 1.623932] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 1.623945] Console: switching to colour dummy device 80x25
[ 1.630457] [drm] nouveau 0000:03:00.0: Attempting to load BIOS image from PRAMIN
[ 1.712053] Refined TSC clocksource calibration: 3210.937 MHz.
[ 1.712057] Switching to clocksource tsc
[ 1.740156] [drm] nouveau 0000:03:00.0: ... appears to be valid
[ 1.740159] [drm] nouveau 0000:03:00.0: BIT BIOS found
[ 1.740162] [drm] nouveau 0000:03:00.0: Bios version 70.04.1b.00
[ 1.740164] [drm] nouveau 0000:03:00.0: TMDS table version 2.0
[ 1.740166] [drm] nouveau 0000:03:00.0: Found Display Configuration Block version 4.0
[ 1.740168] [drm] nouveau 0000:03:00.0: Raw DCB entry 0: 02000300 00000000
[ 1.740170] [drm] nouveau 0000:03:00.0: Raw DCB entry 1: 01000302 00020030
[ 1.740172] [drm] nouveau 0000:03:00.0: Raw DCB entry 2: 04011380 00000000
[ 1.740173] [drm] nouveau 0000:03:00.0: Raw DCB entry 3: 08011382 00020030
[ 1.740174] [drm] nouveau 0000:03:00.0: Raw DCB entry 4: 02022362 00020010
[ 1.740177] [drm] nouveau 0000:03:00.0: DCB connector table: VHER 0x40 5 16 4
[ 1.740179] [drm] nouveau 0000:03:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 1.740180] [drm] nouveau 0000:03:00.0: 1: 0x00010130: type 0x30 idx 1 tag 0x51
[ 1.740182] [drm] nouveau 0000:03:00.0: 2: 0x00002261: type 0x61 idx 2 tag 0x08
[ 1.740186] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0x67DD
[ 1.760353] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0x6EAE
[ 1.773432] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0x8122
[ 1.773434] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0x812C
[ 1.773490] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0x830B
[ 1.773491] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset 0x8370
[ 1.793493] [drm] nouveau 0000:03:00.0: 0x8370: Condition still not met after 20ms, skipping following opcodes
[ 1.793503] [drm] nouveau 0000:03:00.0: voltage table 0x40 unknown
[ 1.812468] [drm] nouveau 0000:03:00.0: 4 available performance level(s)
[ 1.812471] [drm] nouveau 0000:03:00.0: 0: memory 135MHz core 50MHz shader 101MHz timing 5
[ 1.812473] [drm] nouveau 0000:03:00.0: 1: memory 324MHz core 405MHz shader 810MHz voltage 10mV timing 4
[ 1.812476] [drm] nouveau 0000:03:00.0: 2: memory 1900MHz core 405MHz shader 810MHz voltage 20mV timing 3
[ 1.812478] [drm] nouveau 0000:03:00.0: 3: memory 1900MHz core 763MHz shader 1526MHz voltage 20mV timing 3
[ 1.814364] [TTM] Zone kernel: Available graphics memory: 4095356 kiB.
[ 1.814365] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 1.814367] [TTM] Initializing pool allocator.
[ 1.814374] [drm] nouveau 0000:03:00.0: Detected 1024MiB VRAM
[ 1.816490] [drm] nouveau 0000:03:00.0: 512 MiB GART (aperture)
[ 1.820041] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.820042] [drm] No driver support for vblank timestamp query.
[ 2.058939] [drm] nouveau 0000:03:00.0: allocated 1440x900 fb: 0x1c0000, bo ffff88022020bc00
[ 2.059009] fbcon: nouveaufb (fb0) is primary device
[ 2.109515] bootsplash: scaling image from 1024x768 to 1440x900
[ 2.136228] bootsplash: scaling image from 1024x768 to 1440x900
[ 2.162368] bootsplash: scaling image from 1024x768 to 1440x900
[ 2.189075] bootsplash: scaling image from 1024x768 to 1440x900
[ 2.207401] Console: switching to colour frame buffer device 176x52
[ 2.213359] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 2.215472] bootsplash: scaling image from 1024x768 to 1440x900
[ 2.243099] bootsplash: scaling image from 1024x768 to 1440x900
[ 2.261484] fb0: nouveaufb frame buffer device
[ 2.261486] drm: registered panic notifier
[ 2.261491] [drm] Initialized nouveau 0.0.16 20090420 for 0000:03:00.0 on minor 0
[ 2.467856] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 2.474590] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 2.709077] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 2.719178] systemd[1]: Set hostname to .
[ 2.864284] systemd-readahead-replay[383]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 3.012181] udevd[408]: starting version 173
[ 3.069792] firewire_ohci 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.069801] firewire_ohci 0000:02:00.0: setting latency timer to 64
[ 3.072619] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.072623] ALSA hda_intel.c:2415 Using LPIB position fix
[ 3.073056] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 3.077807] FDC 0 is a post-1991 82077
[ 3.079804] ALSA hda_intel.c:1492 Enable sync_write for stable communication
[ 3.081757] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.086032] MCE: In-kernel MCE decoding enabled.
[ 3.086505] EDAC MC: Ver: 2.1.0
[ 3.087517] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.087571] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.087596] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.087620] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3.088471] hda_codec: ALC1200: BIOS auto-probing.
[ 3.088474] ALSA patch_realtek.c:1212 SKU: Nid=0x1d sku_cfg=0x4015e601
[ 3.088476] ALSA patch_realtek.c:1214 SKU: port_connectivity=0x1
[ 3.088477] ALSA patch_realtek.c:1215 SKU: enable_pcbeep=0x1
[ 3.088479] ALSA patch_realtek.c:1216 SKU: check_sum=0x00000005
[ 3.088480] ALSA patch_realtek.c:1217 SKU: customization=0x000000e6
[ 3.088481] ALSA patch_realtek.c:1218 SKU: external_amp=0x0
[ 3.088483] ALSA patch_realtek.c:1219 SKU: platform_type=0x0
[ 3.088484] ALSA patch_realtek.c:1220 SKU: swap=0x0
[ 3.088485] ALSA patch_realtek.c:1221 SKU: override=0x1
[ 3.088489] ALSA hda_codec.c:4877 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.088491] ALSA hda_codec.c:4881 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.088493] ALSA hda_codec.c:4885 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.088494] ALSA hda_codec.c:4886 mono: mono_out=0x0
[ 3.088495] ALSA hda_codec.c:4889 dig-out=0x11/0x1e
[ 3.088496] ALSA hda_codec.c:4890 inputs:
[ 3.088498] ALSA hda_codec.c:4894 Rear Mic=0x18
[ 3.088500] ALSA hda_codec.c:4894 Front Mic=0x19
[ 3.088501] ALSA hda_codec.c:4894 Line=0x1a
[ 3.088502] ALSA hda_codec.c:4896
[ 3.091450] ALSA patch_realtek.c:1275 realtek: No valid SSID, checking pincfg 0x4015e601 for NID 0x1d
[ 3.091452] ALSA patch_realtek.c:1291 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
[ 3.094224] AMD64 EDAC driver v3.4.0
[ 3.102892] boot.localnet[443]: Using boot-specified hostname 'linux-cr24.site'
[ 3.102897] boot.localnet[443]: Setting up hostname 'linux-cr24'..done
[ 3.102900] boot.localnet[443]: Setting up loopback interface RTNETLINK answers: File exists
[ 3.102903] boot.localnet[443]: ..done
[ 3.106380] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 3.111176] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.111528] 8139cp 0000:01:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.111856] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 3.111913] 8139too 0000:01:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 3.112716] 8139too 0000:01:06.0: eth0: RealTek RTL8139 at 0xffffc90011a10c00, 00:e0:7d:d8:25:8d, IRQ 21
[ 3.113103] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.113409] EDAC amd64: DRAM ECC disabled.
[ 3.113415] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 3.113416] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 3.113416] (Note that use of the override may cause unknown side effects.)
[ 3.113459] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.113480] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 3.113652] scsi4 : pata_atiixp
[ 3.113691] scsi5 : pata_atiixp
[ 3.114224] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 3.114225] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 3.116072] snd_hda_intel 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.116074] hda_intel: Disabling MSI
[ 3.116113] snd_hda_intel 0000:03:00.1: setting latency timer to 64
[ 3.119057] bootsplash: scaling image from 1024x768 to 1440x900
[ 3.122077] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 3.122695] ALSA hda_intel.c:1454 Enable delay in RIRB handling
[ 3.147218] bootsplash: scaling image from 1024x768 to 1440x900
[ 3.173542] boot.lvm[619]: Waiting for udev to settle...
[ 3.188263] ifup[648]: Service network not started and mode 'auto' -> skipping
[ 3.232776] systemd-fsck[665]: /dev/sda6: clean, 692/1945888 files, 212387/7769088 blocks
[ 3.263249] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[ 3.268561] ata6.00: HPA detected: current 976771055, native 976773168
[ 3.268566] ata6.00: ATA-8: ST3500418AS, CC37, max UDMA/133
[ 3.268568] ata6.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.269558] ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.02, max UDMA/66
[ 3.274561] ata6.00: configured for UDMA/100
[ 3.275513] ata5.00: configured for UDMA/66
[ 3.277994] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.02 PQ: 0 ANSI: 5
[ 3.278130] scsi 4:0:0:0: Attached scsi generic sg4 type 5
[ 3.278238] scsi 5:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5
[ 3.278338] sd 5:0:0:0: [sde] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 3.278362] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 3.278407] sd 5:0:0:0: [sde] Write Protect is off
[ 3.278409] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 3.278430] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.343560] sde: sde1 sde2 sde3 sde4 < sde5 sde6 sde7 >
[ 3.343908] sd 5:0:0:0: [sde] Attached SCSI disk
[ 3.344272] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 3.344361] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 3.350407] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.350410] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.350550] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.378037] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.418017] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.457019] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.496020] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.515210] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input6
[ 3.515255] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input7
[ 3.515295] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input8
[ 3.515343] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input9
[ 3.623100] firewire_core: created device fw0: GUID 001e8c0001fa813c, S400
[ 3.809229] boot.lvm[619]: Scanning for LVM volume groups...
[ 3.898150] boot.lvm[619]: No volume groups found
[ 3.899792] device-mapper: uevent: version 1.0.3
[ 3.899864] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 3.900149] boot.lvm[619]: No volume groups found
[ 3.901169] boot.lvm[619]: Reading all physical volumes. This may take a while...
[ 3.901387] boot.lvm[619]: Activating LVM volume groups...
[ 3.907463] boot.lvm[619]: No volume groups found
[ 3.907971] boot.lvm[619]: ..done
[ 3.973341] boot.quota[778]: Turning quota on
[ 3.982335] boot.quota[778]: Checking quotas. This may take some time.
[ 3.985392] boot.quota[778]: ..done
[ 4.137646] logger[816]: Requesting microcode for AMD fam10h or newer CPU(s)
[ 4.138907] microcode: CPU0: patch_level=0x01000086
[ 4.142287] microcode: CPU1: patch_level=0x01000086
[ 4.143331] microcode: CPU2: patch_level=0x01000086
[ 4.144370] microcode: CPU3: patch_level=0x01000086
[ 4.145507] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[ 4.145838] microcode.ctl[798]: Checking/updating CPU microcode .. AMD fam10h or newer CPU(s) found..done
[ 4.153493] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor (4 cpu cores) (version 2.20.00)
[ 4.153500] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 4.153501] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 4.156853] brld[820]: Starting brld
[ 4.157738] brld[820]: ..done
[ 4.161204] rc.cpufreq[846]: CPU frequency scaling is not supported by your processor.
[ 4.161820] rc.cpufreq[848]: boot with 'CPUFREQ=no' in to avoid this warning.
[ 4.162868] cpufreq[808]: Loading CPUFreq modules - hardware support not available..skipped
[ 4.207213] vboxguest: VirtualBox Guest PCI device not found.
[ 4.210497] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.212135] vboxadd[833]: Starting the VirtualBox Guest Additions ..failed
[ 4.212140] vboxadd[833]: (modprobe vboxguest failed)
[ 4.214306] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.216058] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.239972] SuSEfirewall2[935]: Firewall rules set to CLOSE.
[ 4.240536] SuSEfirewall2_init[863]: Loading basic firewall rules ..done
[ 4.423146] systemd[1]: vboxadd.service: control process exited, code=exited status=1
[ 4.455059] systemd[1]: Unit vboxadd.service entered failed state.
[ 4.632717] sbl[938]: Starting sbl
[ 4.633612] sbl[938]: ..done
[ 4.758324] systemd[1]: NetworkManager.service: control process exited, code=exited status=1
[ 4.765069] systemd[1]: Job NetworkManager-wait-online.service/start failed with result 'dependency'.
[ 4.765079] systemd[1]: Unit NetworkManager.service entered failed state.
[ 4.783878] systemd[1]: vmtoolsd.service: control process exited, code=exited status=7
[ 4.793056] systemd[1]: Unit vmtoolsd.service entered failed state.
[ 4.863151] bootsplash: status on console 0 changed to on
[ 5.667203] 8139too 0000:01:06.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 5.677114] NET: Registered protocol family 17
[ 7.182100] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr,commit=0
[ 7.185926] EXT4-fs (sda6): re-mounted. Opts: acl,user_xattr,commit=0
[ 15.874018] eth0: no IPv6 routers present
[ 688.193910] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 2180.913556] ioctl32(lmms:16039): Unknown cmd fd(11) cmd(40045542){t:'U';sz:4} arg(fff23064) on /dev/snd/controlC0