dmesg - PSG_Server6
Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet)
Linux version 2.6.18-238.19.1.el5xen (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Fri Jul 15 08:16:59 EDT 2011
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000e0e88000 (usable)
On node 0 totalpages: 921224
DMA zone: 921224 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa100
ACPI: XSDT (v001 051111 XSDT1607 0x20110511 MSFT 0x00000097) @ 0x00000000bf7b0100
ACPI: FADT (v004 051111 FACP1607 0x20110511 MSFT 0x00000097) @ 0x00000000bf7b0290
ACPI: MADT (v002 051111 APIC1607 0x20110511 MSFT 0x00000097) @ 0x00000000bf7b0390
ACPI: MCFG (v001 051111 OEMMCFG 0x20110511 MSFT 0x00000097) @ 0x00000000bf7b04a0
ACPI: OEMB (v001 051111 OEMB1607 0x20110511 MSFT 0x00000097) @ 0x00000000bf7be040
ACPI: SSDT (v001 DpgPmm CpuPm 0x00000012 INTL 0x20051117) @ 0x00000000bf7c0980
ACPI: DSDT (v002 CASTV CASTV133 0x00000133 INTL 0x20051117) @ 0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
Built 1 zonelists. Total pages: 921224
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2266.778 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: 0xffff88000571f000 - 0xffff88000971f000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 3523584k/3684896k available (2530k kernel code, 152696k reserved, 1736k data, 196k init)
Calibrating delay using timer specific routine.. 5669.35 BogoMIPS (lpj=11338718)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
(SMP-)alternatives turned off
ACPI: Core revision 20060707
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
Initializing CPU#4
Initializing CPU#5
Initializing CPU#6
Initializing CPU#7
Initializing CPU#8
Initializing CPU#9
Initializing CPU#10
Brought up 12 CPUs
sizeof(vma)=168 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
Initializing CPU#11
migration_cost=18
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPEA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 17 devices
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
pnp: 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
pnp: 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
pnp: 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
pnp: 00:0a: ioport range 0xa60-0xa6f has been reserved
pnp: 00:0b: ioport range 0xa00-0xa0f has been reserved
pnp: 00:0b: ioport range 0xa10-0xaf7 could not be reserved
pnp: 00:0c: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
pnp: 00:0c: iomem range 0xfed40000-0xfed8ffff has been reserved
pnp: 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:10: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:10: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:10: iomem range 0x100000-0xbfffffff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:08.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: e000-efff
MEM window: fbe00000-fbefffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: d000-dfff
MEM window: fbd00000-fbdfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: fb000000-fbcfffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
GSI 16 sharing vector 0x98 and IRQ 16
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1313056999.860:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 81FDEDE8FE88D215
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:06.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.4 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P001Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P001Cst] [20060707]
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
brd: module loaded
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Initalizing network drop monitor service
Write protecting the kernel read-only data: 499k
GSI 17 sharing vector 0x41 and IRQ 17
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 17, io mem 0xfaffa000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
GSI 18 sharing vector 0x49 and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfaffc000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
GSI 19 sharing vector 0x51 and IRQ 19
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 19, io base 0x0000a480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 20 sharing vector 0x59 and IRQ 20
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 20, io base 0x0000a800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
GSI 21 sharing vector 0x61 and IRQ 21
ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 21, io base 0x0000a880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ac00
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000ac80
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 1-6: new high speed USB device using ehci_hcd and address 4
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000b000
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 1-6: configuration #1 chosen from 1 choice
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 3 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 21
ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 21
hub 2-0:1.0: over-current change on port 5
hub 2-0:1.0: over-current change on port 6
ata1: SATA link down (SStatus 0 SControl 300)
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
input: HID 1267:0103 as /class/input/input0
input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1a.1-1
input: HID 1267:0103 as /class/input/input1
input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1a.1-1
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: WDC WD5000ABYS-01TNA0, 12.01C01, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
Vendor: ATA Model: WDC WD5000ABYS-0 Rev: 12.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 1:0:0:0: Attached scsi disk sda
Initializing USB Mass Storage driver...
usb 4-2: new low speed USB device using uhci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input2
input,hiddev96: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-2
usb 1-6.1: new high speed USB device using ehci_hcd and address 5
usb 1-6.1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input3
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.7-6.1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input4
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.7-6.1
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1313057031.830:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input5
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 17
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
GSI 22 sharing vector 0x69 and IRQ 22
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:19.0 to 64
Floppy drive(s): fd0 is 1.44M
eth0: (PCI Express:2.5GB/s:Width x1) 00:15:b2:a1:76:be
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff
e1000e 0000:03:00.0: Disabling ASPM L1
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:03:00.0 to 64
sd 1:0:0:0: Attached scsi generic sg0 type 0
eth1: (PCI Express:2.5GB/s:Width x4) 00:15:b2:a1:76:bc
eth1: Intel(R) PRO/1000 Network Connection
eth1: MAC: 0, PHY: 4, PBA No: ffffff-0ff
e1000e 0000:03:00.1: Disabling ASPM L1
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.1 to 64
eth2: (PCI Express:2.5GB/s:Width x4) 00:15:b2:a1:76:bd
eth2: Intel(R) PRO/1000 Network Connection
eth2: MAC: 0, PHY: 4, PBA No: ffffff-0ff
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:02:00.0 to 64
e1000e 0000:02:00.0: Disabling ASPM L0s
eth3: (PCI Express:2.5GB/s:Width x1) 00:15:b2:a1:76:bf
eth3: Intel(R) PRO/1000 Network Connection
eth3: MAC: 3, PHY: 8, PBA No: ffffff-0ff
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
floppy0: no floppy controllers found
work still pending
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
work still pending
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.6 loaded
loop: loaded (max 8 devices)
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 6094840k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:6094840k
IA-32 Microcode Update Driver: v1.14-xen
Loading iSCSI transport class v2.0-871.
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
iscsi: registered transport (cxgb3i)
Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
iscsi: registered transport (be2iscsi)
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present
Bridge firewalling registered
Ebtables v2.0 registered
device vif0.0 entered promiscuous mode
xenbr0: port 1(vif0.0) entering forwarding state
ADDRCONF(NETDEV_UP): peth0: link is not ready
e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
device peth0 entered promiscuous mode
xenbr0: port 2(peth0) entering forwarding state
virbr0: no IPv6 routers present
eth0: no IPv6 routers present
usb 4-1: USB disconnect, address 2
usb 4-2: USB disconnect, address 3
usb 2-2: new high speed USB device using ehci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Vendor: BENQ Model: DVD DC EW200G Rev: 6B43
Type: CD-ROM ANSI SCSI revision: 00
scsi 2:0:0:0: Attached scsi generic sg1 type 5
usb-storage: device scan complete
sr0: scsi3-mmc drive: 47x/125x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
usb 4-1: new low speed USB device using uhci_hcd and address 4
usb 4-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input6
input,hiddev96: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1
usb 4-2: new low speed USB device using uhci_hcd and address 5
usb 4-2: configuration #1 chosen from 1 choice
input: HID 1267:0103 as /class/input/input7
input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1a.1-2
input: HID 1267:0103 as /class/input/input8
input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1a.1-2
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif1.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif1.0: link is not ready
tap0: no IPv6 routers present
xenbr0: port 4(vif1.0) entering disabled state
device vif1.0 left promiscuous mode
xenbr0: port 4(vif1.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif2.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif2.0: link is not ready
xenbr0: port 4(vif2.0) entering disabled state
device vif2.0 left promiscuous mode
xenbr0: port 4(vif2.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif3.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif3.0: link is not ready
tap0: no IPv6 routers present
xenbr0: port 4(vif3.0) entering disabled state
device vif3.0 left promiscuous mode
xenbr0: port 4(vif3.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif4.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif4.0: link is not ready
xenbr0: port 4(vif4.0) entering disabled state
device vif4.0 left promiscuous mode
xenbr0: port 4(vif4.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif5.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif5.0: link is not ready
tap0: no IPv6 routers present
xenbr0: port 4(vif5.0) entering disabled state
device vif5.0 left promiscuous mode
xenbr0: port 4(vif5.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif6.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif6.0: link is not ready
tap0: no IPv6 routers present
xenbr0: port 4(vif6.0) entering disabled state
device vif6.0 left promiscuous mode
xenbr0: port 4(vif6.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif7.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif7.0: link is not ready
tap0: no IPv6 routers present
blkback: ring-ref 8, event-channel 7, protocol 1 (x86_64-abi)
blkback: ring-ref 9, event-channel 8, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready
xenbr0: port 4(vif7.0) entering forwarding state
xenbr0: port 4(vif7.0) entering disabled state
device vif7.0 left promiscuous mode
xenbr0: port 4(vif7.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif8.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif8.0: link is not ready
tap0: no IPv6 routers present
blkback: ring-ref 8, event-channel 7, protocol 1 (x86_64-abi)
blkback: ring-ref 9, event-channel 8, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready
xenbr0: port 4(vif8.0) entering forwarding state
xenbr0: port 4(vif8.0) entering disabled state
device vif8.0 left promiscuous mode
xenbr0: port 4(vif8.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif9.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif9.0: link is not ready
tap0: no IPv6 routers present
xenbr0: port 4(vif9.0) entering disabled state
device vif9.0 left promiscuous mode
xenbr0: port 4(vif9.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif10.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif10.0: link is not ready
tap0: no IPv6 routers present
blkback: ring-ref 8, event-channel 7, protocol 1 (x86_64-abi)
blkback: ring-ref 9, event-channel 8, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif10.0: link becomes ready
xenbr0: port 4(vif10.0) entering forwarding state
usb 2-2: USB disconnect, address 2
xenbr0: port 4(vif10.0) entering disabled state
device vif10.0 left promiscuous mode
xenbr0: port 4(vif10.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
usb 4-1: USB disconnect, address 4
usb 4-2: USB disconnect, address 5
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
FS-Cache: Loaded
Removing netfilter NETLINK layer.
Warning Timer ISR/3: Time went backwards: delta=-13716445 delta_cpu=18283555 shadow=548568364501350 off=57782754 processed=548568436000000 cpu_processed=548568404000000
0: 548568428000000
1: 548568428000000
2: 548568428000000
3: 548568404000000
4: 548568428000000
5: 548568424000000
6: 548568428000000
7: 548568428000000
8: 548568428000000
9: 548568416000000
10: 548568424000000
11: 548568428000000
Warning Timer ISR/3: Time went backwards: delta=-11715684 delta_cpu=16284316 shadow=548568364501350 off=67783334 processed=548568444000000 cpu_processed=548568416000000
0: 548568436000000
1: 548568440000000
2: 548568440000000
3: 548568416000000
4: 548568436000000
5: 548568436000000
6: 548568436000000
7: 548568440000000
8: 548568436000000
9: 548568428000000
10: 548568436000000
11: 548568436000000
Warning Timer ISR/3: Time went backwards: delta=-13716017 delta_cpu=18283983 shadow=548568364501350 off=77783081 processed=548568456000000 cpu_processed=548568424000000
0: 548568448000000
1: 548568448000000
2: 548568448000000
3: 548568424000000
4: 548568448000000
5: 548568444000000
6: 548568448000000
7: 548568448000000
8: 548568448000000
9: 548568436000000
10: 548568444000000
11: 548568448000000
Warning Timer ISR/3: Time went backwards: delta=-19716314 delta_cpu=16283686 shadow=548568364501350 off=87782694 processed=548568472000000 cpu_processed=548568436000000
0: 548568456000000
1: 548568468000000
2: 548568468000000
3: 548568436000000
4: 548568456000000
5: 548568456000000
6: 548568468000000
7: 548568460000000
8: 548568468000000
9: 548568448000000
10: 548568464000000
11: 548568468000000
Warning Timer ISR/9: Time went backwards: delta=-12627236 delta_cpu=15372764 shadow=548568410779344 off=52593710 processed=548568476000000 cpu_processed=548568448000000
0: 548568456000000
1: 548568468000000
2: 548568468000000
3: 548568444000000
4: 548568456000000
5: 548568456000000
6: 548568468000000
7: 548568468000000
8: 548568468000000
9: 548568448000000
10: 548568464000000
11: 548568468000000
Warning Timer ISR/3: Time went backwards: delta=-21715890 delta_cpu=18284110 shadow=548568364501350 off=97783230 processed=548568484000000 cpu_processed=548568444000000
0: 548568468000000
1: 548568480000000
2: 548568480000000
3: 548568444000000
4: 548568468000000
5: 548568464000000
6: 548568476000000
7: 548568480000000
8: 548568476000000
9: 548568456000000
10: 548568476000000
11: 548568476000000
Warning Timer ISR/9: Time went backwards: delta=-10627061 delta_cpu=17372939 shadow=548568410779344 off=62593876 processed=548568484000000 cpu_processed=548568456000000
0: 548568468000000
1: 548568480000000
2: 548568480000000
3: 548568456000000
4: 548568468000000
5: 548568464000000
6: 548568476000000
7: 548568480000000
8: 548568476000000
9: 548568456000000
10: 548568476000000
11: 548568476000000
Warning Timer ISR/3: Time went backwards: delta=-23715551 delta_cpu=16284449 shadow=548568364501350 off=107783473 processed=548568496000000 cpu_processed=548568456000000
0: 548568476000000
1: 548568488000000
2: 548568488000000
3: 548568456000000
4: 548568476000000
5: 548568476000000
6: 548568488000000
7: 548568488000000
8: 548568488000000
9: 548568468000000
10: 548568484000000
11: 548568488000000
Warning Timer ISR/9: Time went backwards: delta=-12627112 delta_cpu=15372888 shadow=548568410779344 off=72593764 processed=548568496000000 cpu_processed=548568468000000
0: 548568476000000
1: 548568488000000
2: 548568488000000
3: 548568464000000
4: 548568476000000
5: 548568476000000
6: 548568488000000
7: 548568488000000
8: 548568488000000
9: 548568468000000
10: 548568484000000
11: 548568488000000
Warning Timer ISR/3: Time went backwards: delta=-21715615 delta_cpu=18284385 shadow=548568364501350 off=117783311 processed=548568504000000 cpu_processed=548568464000000
0: 548568488000000
1: 548568500000000
2: 548568500000000
3: 548568464000000
4: 548568488000000
5: 548568484000000
6: 548568496000000
7: 548568500000000
8: 548568496000000
9: 548568476000000
10: 548568496000000
11: 548568496000000
printk: 289 messages suppressed.
Warning Timer ISR/10: Time went backwards: delta=-16851199 delta_cpu=19148801 shadow=554733859147357 off=80008877 processed=554733956000000 cpu_processed=554733920000000
0: 554733944000000
1: 554733952000000
2: 554733944000000
3: 554733940000000
4: 554733944000000
5: 554733944000000
6: 554733944000000
7: 554733944000000
8: 554733940000000
9: 554733944000000
10: 554733920000000
11: 554733944000000
Warning Timer ISR/10: Time went backwards: delta=-18851297 delta_cpu=17148703 shadow=554733859147357 off=90001558 processed=554733968000000 cpu_processed=554733932000000
0: 554733964000000
1: 554733960000000
2: 554733964000000
3: 554733960000000
4: 554733964000000
5: 554733964000000
6: 554733964000000
7: 554733964000000
8: 554733960000000
9: 554733964000000
10: 554733932000000
11: 554733964000000
Warning Timer ISR/10: Time went backwards: delta=-16851141 delta_cpu=19148859 shadow=554733859147357 off=100001729 processed=554733976000000 cpu_processed=554733940000000
0: 554733972000000
1: 554733972000000
2: 554733976000000
3: 554733972000000
4: 554733972000000
5: 554733972000000
6: 554733976000000
7: 554733972000000
8: 554733972000000
9: 554733972000000
10: 554733940000000
11: 554733972000000
Warning Timer ISR/10: Time went backwards: delta=-18850907 delta_cpu=17149093 shadow=554733859147357 off=110002124 processed=554733988000000 cpu_processed=554733952000000
0: 554733984000000
1: 554733980000000
2: 554733984000000
3: 554733980000000
4: 554733984000000
5: 554733972000000
6: 554733984000000
7: 554733984000000
8: 554733980000000
9: 554733984000000
10: 554733952000000
11: 554733984000000
Warning Timer ISR/10: Time went backwards: delta=-24851248 delta_cpu=19148752 shadow=554733859147357 off=120001570 processed=554734004000000 cpu_processed=554733960000000
0: 554733992000000
1: 554734000000000
2: 554733996000000
3: 554733996000000
4: 554733984000000
5: 554733972000000
6: 554733996000000
7: 554733992000000
8: 554733992000000
9: 554733992000000
10: 554733960000000
11: 554733992000000
Warning Timer ISR/10: Time went backwards: delta=-26850964 delta_cpu=17149036 shadow=554733859147357 off=130001922 processed=554734016000000 cpu_processed=554733972000000
0: 554734004000000
1: 554734012000000
2: 554734016000000
3: 554734016000000
4: 554734008000000
5: 554734008000000
6: 554734016000000
7: 554734004000000
8: 554734000000000
9: 554734012000000
10: 554733972000000
11: 554734004000000
Warning Timer ISR/10: Time went backwards: delta=-28851088 delta_cpu=19148912 shadow=554733859147357 off=140001751 processed=554734028000000 cpu_processed=554733980000000
0: 554734024000000
1: 554734020000000
2: 554734024000000
3: 554734020000000
4: 554734008000000
5: 554734008000000
6: 554734024000000
7: 554734024000000
8: 554734020000000
9: 554734024000000
10: 554733980000000
11: 554734024000000
Warning Timer ISR/10: Time went backwards: delta=-26851212 delta_cpu=17148788 shadow=554733859147357 off=150001639 processed=554734036000000 cpu_processed=554733992000000
0: 554734032000000
1: 554734032000000
2: 554734036000000
3: 554734028000000
4: 554734008000000
5: 554734008000000
6: 554734036000000
7: 554734032000000
8: 554734032000000
9: 554734032000000
10: 554733992000000
11: 554734032000000
Warning Timer ISR/10: Time went backwards: delta=-28849469 delta_cpu=19150531 shadow=554733859147357 off=160003666 processed=554734048000000 cpu_processed=554734000000000
0: 554734044000000
1: 554734040000000
2: 554734044000000
3: 554734040000000
4: 554734008000000
5: 554734008000000
6: 554734044000000
7: 554734044000000
8: 554734040000000
9: 554734044000000
10: 554734000000000
11: 554734044000000
Warning Timer ISR/10: Time went backwards: delta=-38851104 delta_cpu=17148896 shadow=554733859147357 off=170001727 processed=554734068000000 cpu_processed=554734012000000
0: 554734052000000
1: 554734060000000
2: 554734064000000
3: 554734052000000
4: 554734008000000
5: 554734008000000
6: 554734064000000
7: 554734052000000
8: 554734052000000
9: 554734064000000
10: 554734012000000
11: 554734052000000
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif11.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif11.0: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
tap0: no IPv6 routers present
blkback: ring-ref 8, event-channel 7, protocol 1 (x86_64-abi)
blkback: ring-ref 9, event-channel 8, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif11.0: link becomes ready
xenbr0: port 4(vif11.0) entering forwarding state
xenbr0: port 4(vif11.0) entering disabled state
device vif11.0 left promiscuous mode
xenbr0: port 4(vif11.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif12.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif12.0: link is not ready
tap0: no IPv6 routers present
blkback: ring-ref 8, event-channel 7, protocol 1 (x86_64-abi)
blkback: ring-ref 9, event-channel 8, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif12.0: link becomes ready
xenbr0: port 4(vif12.0) entering forwarding state
usb 4-1: new low speed USB device using uhci_hcd and address 6
usb 4-1: configuration #1 chosen from 1 choice
input: HID 1267:0103 as /class/input/input9
input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1a.1-1
input: HID 1267:0103 as /class/input/input10
input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1a.1-1
usb 4-2: new low speed USB device using uhci_hcd and address 7
usb 4-2: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input11
input,hiddev96: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-2
usb 4-1: USB disconnect, address 6
usb 4-2: USB disconnect, address 7
xenbr0: port 4(vif12.0) entering disabled state
device vif12.0 left promiscuous mode
xenbr0: port 4(vif12.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif13.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif13.0: link is not ready
tap0: no IPv6 routers present
blkback: ring-ref 8, event-channel 7, protocol 1 (x86_64-abi)
blkback: ring-ref 9, event-channel 8, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif13.0: link becomes ready
xenbr0: port 4(vif13.0) entering forwarding state
usb 4-1: new low speed USB device using uhci_hcd and address 8
usb 4-1: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /class/input/input12
input,hiddev96: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1
usb 4-2: new low speed USB device using uhci_hcd and address 9
usb 4-2: configuration #1 chosen from 1 choice
input: HID 1267:0103 as /class/input/input13
input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1a.1-2
input: HID 1267:0103 as /class/input/input14
input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1a.1-2
xenbr0: port 4(vif13.0) entering disabled state
device vif13.0 left promiscuous mode
xenbr0: port 4(vif13.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state
device tap0 entered promiscuous mode
xenbr0: port 3(tap0) entering forwarding state
device vif14.0 entered promiscuous mode
ADDRCONF(NETDEV_UP): vif14.0: link is not ready
tap0: no IPv6 routers present
blkback: ring-ref 8, event-channel 15, protocol 1 (x86_64-abi)
blkback: ring-ref 9, event-channel 16, protocol 1 (x86_64-abi)
ADDRCONF(NETDEV_CHANGE): vif14.0: link becomes ready
xenbr0: port 4(vif14.0) entering forwarding state
xhpl[9552]: segfault at 0000000000000001 rip 0000003fecc60d67 rsp 00007fff442b4f80 error 4
xhpl[9584]: segfault at 0000000000000001 rip 0000003fecc60d67 rsp 00007ffff479ebe0 error 4
xhpl[9614]: segfault at 0000000000000001 rip 0000003fecc60d67 rsp 00007fffcb376160 error 4