dmesg - test_athlon64_15_08
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-10-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #46-Ubuntu SMP Tue Jun 28 15:05:41 UTC 2011 (Ubuntu 2.6.38-10.46-generic 2.6.38.7)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0001000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/K8V-XE, BIOS ASUS K8V-XE ACPI BIOS Revision 0703 05/24/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 003FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f5830] f5830
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 3676c000 - 373ae000
[ 0.000000] ACPI: RSDP 000f7790 00024 (v02 K8T890)
[ 0.000000] ACPI: XSDT 3fee30c0 0003C (v01 K8T890 ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 3fee99c0 000F4 (v03 K8T890 ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 3fee3240 0670B (v01 K8T890 ASUSACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 3fee0000 00040
[ 0.000000] ACPI: MCFG 3fee9bc0 0003C (v01 K8T890 ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 3fee9b00 00066 (v01 K8T890 ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 134MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fee0
[ 0.000000] On node 0 totalpages: 261743
[ 0.000000] free_area_init_node: node 0, pgdat c1784140, node_mem_map f5f6c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 270 pages used for memmap
[ 0.000000] HighMem zone: 34260 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:a0100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f5800000 s28800 r0 d24448 u4194304
[ 0.000000] pcpu-alloc: s28800 r0 d24448 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259697
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5236800 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fee0)
[ 0.000000] Memory: 1010868k/1047424k available (5190k kernel code, 36104k reserved, 2539k data, 700k init, 138120k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB)
[ 0.000000] .data : 0xc1511841 - 0xc178c4c0 (2539 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1511841 (5190 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2000.115 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.23 BogoMIPS (lpj=8000460)
[ 0.008011] pid_max: default: 32768 minimum: 301
[ 0.008046] Security Framework initialized
[ 0.008082] AppArmor: AppArmor initialized
[ 0.008085] Yama: becoming mindful.
[ 0.008168] Mount-cache hash table entries: 512
[ 0.008354] Initializing cgroup subsys ns
[ 0.008359] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.008364] Initializing cgroup subsys cpuacct
[ 0.008370] Initializing cgroup subsys memory
[ 0.008383] Initializing cgroup subsys devices
[ 0.008387] Initializing cgroup subsys freezer
[ 0.008391] Initializing cgroup subsys net_cls
[ 0.008394] Initializing cgroup subsys blkio
[ 0.008442] mce: CPU supports 5 MCE banks
[ 0.009169] SMP alternatives: switching to UP code
[ 0.019980] Freeing SMP alternatives: 20k freed
[ 0.020024] ACPI: Core revision 20110112
[ 0.026384] ftrace: allocating 23648 entries in 47 pages
[ 0.028119] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.029016] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.070381] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
[ 0.072003] Performance Events: AMD PMU driver.
[ 0.072003] ... version: 0
[ 0.072003] ... bit width: 48
[ 0.072003] ... generic registers: 4
[ 0.072003] ... value mask: 0000ffffffffffff
[ 0.072003] ... max period: 00007fffffffffff
[ 0.072003] ... fixed-purpose events: 0
[ 0.072003] ... event mask: 000000000000000f
[ 0.072003] Brought up 1 CPUs
[ 0.072003] Total of 1 processors activated (4000.23 BogoMIPS).
[ 0.072003] devtmpfs: initialized
[ 0.072003] print_constraints: dummy:
[ 0.072003] Time: 19:23:43 Date: 08/16/11
[ 0.072003] NET: Registered protocol family 16
[ 0.072003] EISA bus registered
[ 0.072003] node 0 link 0: io port [c000, ffff]
[ 0.072003] TOM: 0000000040000000 aka 1024M
[ 0.072003] node 0 link 0: mmio [a0000, bffff]
[ 0.072003] node 0 link 0: mmio [40000000, dfffffff]
[ 0.072003] node 0 link 0: mmio [f0000000, fdffffff]
[ 0.072003] node 0 link 0: mmio [e0000000, e07fffff]
[ 0.072003] bus: [00, 07] on node 0 link 0
[ 0.072003] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.072003] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.072003] bus: 00 index 2 [mem 0x40000000-0xefffffff]
[ 0.072003] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.072003] ACPI: bus type pci registered
[ 0.072003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.072003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.072003] PCI: Using MMCONFIG for extended config space
[ 0.072003] PCI: Using configuration type 1 for base access
[ 0.072502] bio: create slab at 0
[ 0.073682] ACPI: EC: Look up EC in DSDT
[ 0.079290] ACPI: Interpreter enabled
[ 0.079300] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.079324] ACPI: Using IOAPIC for interrupt routing
[ 0.085874] ACPI: No dock devices found.
[ 0.085877] HEST: Table not found.
[ 0.085882] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.086076] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.086204] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.086207] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.086211] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.086214] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.086217] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[ 0.086239] pci 0000:00:00.0: [1106:0351] type 0 class 0x000600
[ 0.086319] pci 0000:00:00.1: [1106:1351] type 0 class 0x000600
[ 0.086367] pci 0000:00:00.2: [1106:2351] type 0 class 0x000600
[ 0.086415] pci 0000:00:00.3: [1106:3351] type 0 class 0x000600
[ 0.086463] pci 0000:00:00.4: [1106:4351] type 0 class 0x000600
[ 0.086513] pci 0000:00:00.5: [1106:5351] type 0 class 0x000800
[ 0.086583] pci 0000:00:00.7: [1106:7351] type 0 class 0x000600
[ 0.086633] pci 0000:00:01.0: [1106:b999] type 1 class 0x000604
[ 0.086684] pci 0000:00:02.0: [1106:a238] type 1 class 0x000604
[ 0.086731] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.086735] pci 0000:00:02.0: PME# disabled
[ 0.086758] pci 0000:00:03.0: [1106:c238] type 1 class 0x000604
[ 0.086814] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.086819] pci 0000:00:03.0: PME# disabled
[ 0.086864] pci 0000:00:0f.0: [1106:3349] type 0 class 0x000101
[ 0.086883] pci 0000:00:0f.0: reg 10: [io 0xff00-0xff07]
[ 0.086892] pci 0000:00:0f.0: reg 14: [io 0xfe00-0xfe03]
[ 0.086902] pci 0000:00:0f.0: reg 18: [io 0xfd00-0xfd07]
[ 0.086912] pci 0000:00:0f.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.086922] pci 0000:00:0f.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.086932] pci 0000:00:0f.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
[ 0.086962] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.086966] pci 0000:00:0f.0: PME# disabled
[ 0.086986] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
[ 0.087030] pci 0000:00:0f.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.087083] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.087125] pci 0000:00:10.0: reg 20: [io 0xf900-0xf91f]
[ 0.087155] pci 0000:00:10.0: supports D1 D2
[ 0.087158] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087162] pci 0000:00:10.0: PME# disabled
[ 0.087180] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 0.087222] pci 0000:00:10.1: reg 20: [io 0xf800-0xf81f]
[ 0.087252] pci 0000:00:10.1: supports D1 D2
[ 0.087254] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087259] pci 0000:00:10.1: PME# disabled
[ 0.087275] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[ 0.087317] pci 0000:00:10.2: reg 20: [io 0xf700-0xf71f]
[ 0.087347] pci 0000:00:10.2: supports D1 D2
[ 0.087349] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087354] pci 0000:00:10.2: PME# disabled
[ 0.087370] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
[ 0.087412] pci 0000:00:10.3: reg 20: [io 0xf600-0xf61f]
[ 0.087442] pci 0000:00:10.3: supports D1 D2
[ 0.087444] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087449] pci 0000:00:10.3: PME# disabled
[ 0.087467] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[ 0.087484] pci 0000:00:10.4: reg 10: [mem 0xfdffe000-0xfdffe0ff]
[ 0.087545] pci 0000:00:10.4: supports D1 D2
[ 0.087547] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087552] pci 0000:00:10.4: PME# disabled
[ 0.087574] pci 0000:00:11.0: [1106:3287] type 0 class 0x000601
[ 0.087666] pci 0000:00:11.7: [1106:287e] type 0 class 0x000600
[ 0.087719] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[ 0.087735] pci 0000:00:12.0: reg 10: [io 0xf400-0xf4ff]
[ 0.087745] pci 0000:00:12.0: reg 14: [mem 0xfdffd000-0xfdffd0ff]
[ 0.087796] pci 0000:00:12.0: supports D1 D2
[ 0.087799] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087803] pci 0000:00:12.0: PME# disabled
[ 0.087816] pci 0000:00:13.0: [1106:287b] type 1 class 0x000604
[ 0.087851] pci 0000:00:13.1: [1106:287a] type 1 class 0x000604
[ 0.087894] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.087912] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.087928] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.087944] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.087966] PCI: peer root bus 00 res updated from pci conf
[ 0.088034] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.088039] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.088044] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.088049] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.088095] pci 0000:02:00.0: [10de:0402] type 0 class 0x000300
[ 0.088108] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.088121] pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.088135] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.088144] pci 0000:02:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.088154] pci 0000:02:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
[ 0.096024] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.096028] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.096033] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.096039] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.096095] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.096172] pci 0000:03:00.0: reg 24: [mem 0xfdefe000-0xfdefffff]
[ 0.096186] pci 0000:03:00.0: reg 30: [mem 0xfdee0000-0xfdeeffff pref]
[ 0.096214] pci 0000:03:00.0: PME# supported from D3hot
[ 0.096219] pci 0000:03:00.0: PME# disabled
[ 0.096247] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.096269] pci 0000:03:00.1: reg 10: [io 0xef00-0xef07]
[ 0.096282] pci 0000:03:00.1: reg 14: [io 0xee00-0xee03]
[ 0.096295] pci 0000:03:00.1: reg 18: [io 0xed00-0xed07]
[ 0.096308] pci 0000:03:00.1: reg 1c: [io 0xec00-0xec03]
[ 0.096321] pci 0000:03:00.1: reg 20: [io 0xeb00-0xeb0f]
[ 0.096382] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.096396] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.096400] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.096405] pci 0000:00:03.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.096412] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.096438] pci 0000:04:00.0: [1106:287c] type 1 class 0x000604
[ 0.096484] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.096488] pci 0000:04:00.0: PME# disabled
[ 0.096511] pci 0000:04:00.1: [1106:287d] type 1 class 0x000604
[ 0.096555] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
[ 0.096560] pci 0000:04:00.1: PME# disabled
[ 0.096578] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.096593] pci 0000:04:01.0: [1106:3288] type 0 class 0x000403
[ 0.096605] pci 0000:04:01.0: reg 10: [mem 0xfddfc000-0xfddfffff]
[ 0.096659] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[ 0.096663] pci 0000:04:01.0: PME# disabled
[ 0.096674] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.096710] pci 0000:00:13.0: PCI bridge to [bus 04-06]
[ 0.096714] pci 0000:00:13.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.096719] pci 0000:00:13.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.096723] pci 0000:00:13.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.096757] pci 0000:04:00.0: PCI bridge to [bus 05-05]
[ 0.096761] pci 0000:04:00.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.096766] pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.096770] pci 0000:04:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.096803] pci 0000:04:00.1: PCI bridge to [bus 06-06]
[ 0.096808] pci 0000:04:00.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.096812] pci 0000:04:00.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.096817] pci 0000:04:00.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.096860] pci 0000:07:0d.0: [1274:5880] type 0 class 0x000401
[ 0.096876] pci 0000:07:0d.0: reg 10: [io 0xcf00-0xcf3f]
[ 0.096934] pci 0000:07:0d.0: supports D2
[ 0.096961] pci 0000:00:13.1: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.096965] pci 0000:00:13.1: bridge window [io 0xc000-0xcfff]
[ 0.096970] pci 0000:00:13.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.096974] pci 0000:00:13.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.096978] pci 0000:00:13.1: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.096981] pci 0000:00:13.1: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.096984] pci 0000:00:13.1: bridge window [mem 0x40000000-0xefffffff] (subtractive decode)
[ 0.096988] pci 0000:00:13.1: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.097009] pci_bus 0000:00: on NUMA node 0
[ 0.097013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.097191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[ 0.097257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.097324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
[ 0.097378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE5C._PRT]
[ 0.097459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE6C._PRT]
[ 0.097542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[ 0.097741] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.097967] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.138348] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
[ 0.138434] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 0.138521] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
[ 0.138608] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[ 0.138675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.138738] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.138800] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.138874] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
[ 0.139010] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.139015] vgaarb: loaded
[ 0.139284] SCSI subsystem initialized
[ 0.139369] libata version 3.00 loaded.
[ 0.139429] usbcore: registered new interface driver usbfs
[ 0.139443] usbcore: registered new interface driver hub
[ 0.139473] usbcore: registered new device driver usb
[ 0.139601] wmi: Mapper loaded
[ 0.139603] PCI: Using ACPI for IRQ routing
[ 0.139606] PCI: pci_cache_line_size set to 64 bytes
[ 0.139718] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.139721] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.139724] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.139727] reserve RAM buffer: 000000003fee0000 - 000000003fffffff
[ 0.139851] NetLabel: Initializing
[ 0.139853] NetLabel: domain hash size = 128
[ 0.139855] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.139869] NetLabel: unlabeled traffic allowed by default
[ 0.149073] AppArmor: AppArmor Filesystem Enabled
[ 0.149116] pnp: PnP ACPI init
[ 0.149137] ACPI: bus type pnp registered
[ 0.149277] pnp 00:00: [bus 00-ff]
[ 0.149280] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.149283] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.149286] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.149289] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.149297] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.149300] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.149382] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.149402] pnp 00:01: [io 0x0400-0x047f]
[ 0.149404] pnp 00:01: [io 0x0500-0x050f]
[ 0.149488] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.149492] system 00:01: [io 0x0500-0x050f] has been reserved
[ 0.149495] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.149928] pnp 00:02: [mem 0x10000000-0x10000fff]
[ 0.149990] system 00:02: [mem 0x10000000-0x10000fff] could not be reserved
[ 0.149994] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.150238] pnp 00:03: [io 0x0010-0x001f]
[ 0.150241] pnp 00:03: [io 0x0022-0x003f]
[ 0.150244] pnp 00:03: [io 0x0044-0x005f]
[ 0.150246] pnp 00:03: [io 0x0062-0x0063]
[ 0.150248] pnp 00:03: [io 0x0065-0x006f]
[ 0.150251] pnp 00:03: [io 0x0074-0x007f]
[ 0.150253] pnp 00:03: [io 0x0091-0x0093]
[ 0.150256] pnp 00:03: [io 0x00a2-0x00bf]
[ 0.150258] pnp 00:03: [io 0x00e0-0x00ef]
[ 0.150260] pnp 00:03: [io 0x04d0-0x04d1]
[ 0.150263] pnp 00:03: [io 0x0290-0x029f]
[ 0.150265] pnp 00:03: [io 0x0800-0x0805]
[ 0.150268] pnp 00:03: [io 0x0290-0x0297]
[ 0.150347] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.150351] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.150354] system 00:03: [io 0x0800-0x0805] has been reserved
[ 0.150358] system 00:03: [io 0x0290-0x0297] has been reserved
[ 0.150361] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.150375] pnp 00:04: [dma 4]
[ 0.150377] pnp 00:04: [io 0x0000-0x000f]
[ 0.150379] pnp 00:04: [io 0x0080-0x0090]
[ 0.150382] pnp 00:04: [io 0x0094-0x009f]
[ 0.150384] pnp 00:04: [io 0x00c0-0x00df]
[ 0.150425] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.150436] pnp 00:05: [io 0x0070-0x0073]
[ 0.150453] pnp 00:05: [irq 8]
[ 0.150500] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.150510] pnp 00:06: [io 0x0061]
[ 0.150550] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.150559] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.150566] pnp 00:07: [irq 13]
[ 0.150607] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.150759] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.150762] pnp 00:08: [io 0x03f7]
[ 0.150768] pnp 00:08: [irq 6]
[ 0.150771] pnp 00:08: [dma 2]
[ 0.150829] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.151020] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.151027] pnp 00:09: [irq 4]
[ 0.151098] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.151517] pnp 00:0a: [io 0x0378-0x037f]
[ 0.151519] pnp 00:0a: [io 0x0778-0x077b]
[ 0.151526] pnp 00:0a: [irq 7]
[ 0.151528] pnp 00:0a: [dma 3]
[ 0.151605] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.151836] pnp 00:0b: [io 0x0330-0x0331]
[ 0.151848] pnp 00:0b: [irq 10]
[ 0.151907] pnp 00:0b: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.152109] pnp 00:0c: [io 0x0201]
[ 0.152161] pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.152180] pnp 00:0d: [mem 0xe0000000-0xf0000fff]
[ 0.152250] system 00:0d: [mem 0xe0000000-0xf0000fff] could not be reserved
[ 0.152253] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.152392] pnp 00:0e: [mem 0x000d3000-0x000d3fff]
[ 0.152395] pnp 00:0e: [mem 0x000f0000-0x000f7fff]
[ 0.152398] pnp 00:0e: [mem 0x000f8000-0x000fbfff]
[ 0.152401] pnp 00:0e: [mem 0x000fc000-0x000fffff]
[ 0.152403] pnp 00:0e: [mem 0x3fef0000-0x3ffeffff]
[ 0.152406] pnp 00:0e: [mem 0x3fee0000-0x3fefffff]
[ 0.152409] pnp 00:0e: [mem 0xffff0000-0xffffffff]
[ 0.152411] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.152414] pnp 00:0e: [mem 0x00100000-0x3fedffff]
[ 0.152417] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
[ 0.152419] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[ 0.152422] pnp 00:0e: [mem 0xfff80000-0xfffeffff]
[ 0.152500] system 00:0e: [mem 0x000d3000-0x000d3fff] has been reserved
[ 0.152503] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.152507] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.152510] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.152514] system 00:0e: [mem 0x3fef0000-0x3ffeffff] could not be reserved
[ 0.152517] system 00:0e: [mem 0x3fee0000-0x3fefffff] could not be reserved
[ 0.152521] system 00:0e: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.152524] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.152528] system 00:0e: [mem 0x00100000-0x3fedffff] could not be reserved
[ 0.152532] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.152535] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.152539] system 00:0e: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.152543] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.152553] pnp: PnP ACPI: found 15 devices
[ 0.152555] ACPI: ACPI bus type pnp unregistered
[ 0.152559] PnPBIOS: Disabled by ACPI PNP
[ 0.189117] Switching to clocksource acpi_pm
[ 0.189187] pci 0000:00:03.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.189191] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.189194] pci 0000:00:01.0: bridge window [io disabled]
[ 0.189199] pci 0000:00:01.0: bridge window [mem disabled]
[ 0.189203] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 0.189209] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 0.189213] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.189218] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.189223] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.189229] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.189233] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.189239] pci 0000:00:03.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.189244] pci 0000:00:03.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.189252] pci 0000:04:00.0: PCI bridge to [bus 05-05]
[ 0.189254] pci 0000:04:00.0: bridge window [io disabled]
[ 0.189259] pci 0000:04:00.0: bridge window [mem disabled]
[ 0.189263] pci 0000:04:00.0: bridge window [mem pref disabled]
[ 0.189269] pci 0000:04:00.1: PCI bridge to [bus 06-06]
[ 0.189271] pci 0000:04:00.1: bridge window [io disabled]
[ 0.189276] pci 0000:04:00.1: bridge window [mem disabled]
[ 0.189280] pci 0000:04:00.1: bridge window [mem pref disabled]
[ 0.189286] pci 0000:00:13.0: PCI bridge to [bus 04-06]
[ 0.189288] pci 0000:00:13.0: bridge window [io disabled]
[ 0.189293] pci 0000:00:13.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.189297] pci 0000:00:13.0: bridge window [mem pref disabled]
[ 0.189303] pci 0000:00:13.1: PCI bridge to [bus 07-07]
[ 0.189307] pci 0000:00:13.1: bridge window [io 0xc000-0xcfff]
[ 0.189312] pci 0000:00:13.1: bridge window [mem disabled]
[ 0.189316] pci 0000:00:13.1: bridge window [mem pref disabled]
[ 0.189330] pci 0000:00:01.0: setting latency timer to 64
[ 0.189348] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.189352] pci 0000:00:02.0: setting latency timer to 64
[ 0.189364] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 0.189368] pci 0000:00:03.0: setting latency timer to 64
[ 0.189377] pci 0000:00:13.0: setting latency timer to 64
[ 0.189389] pci 0000:04:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.189398] pci 0000:04:00.0: setting latency timer to 64
[ 0.189408] pci 0000:04:00.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.189416] pci 0000:04:00.1: setting latency timer to 64
[ 0.189423] pci 0000:00:13.1: setting latency timer to 64
[ 0.189427] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.189430] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.189433] pci_bus 0000:00: resource 6 [mem 0x40000000-0xefffffff]
[ 0.189436] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff]
[ 0.189440] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.189443] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.189446] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.189449] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.189452] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.189455] pci_bus 0000:03: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.189459] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.189462] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
[ 0.189465] pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
[ 0.189468] pci_bus 0000:07: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.189471] pci_bus 0000:07: resource 6 [mem 0x40000000-0xefffffff]
[ 0.189474] pci_bus 0000:07: resource 7 [mem 0xf0000000-0xffffffff]
[ 0.189521] NET: Registered protocol family 2
[ 0.189590] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.189931] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.191097] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.191712] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.191715] TCP reno registered
[ 0.191719] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.191740] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.191855] NET: Registered protocol family 1
[ 0.191869] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.191890] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.191895] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
[ 0.191895] Switched to NOHz mode on CPU #0
[ 0.191895] pci 0000:02:00.0: Boot video device
[ 0.191895] PCI: CLS 32 bytes, default 64
[ 0.191895] cpufreq-nforce2: No nForce2 chipset.
[ 0.191895] audit: initializing netlink socket (disabled)
[ 0.191895] type=2000 audit(1313522623.188:1): initialized
[ 0.202748] Trying to unpack rootfs image as initramfs...
[ 0.220195] highmem bounce pool size: 64 pages
[ 0.220204] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.228185] VFS: Disk quotas dquot_6.5.2
[ 0.228273] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.229084] fuse init (API version 7.16)
[ 0.229190] msgmni has been set to 1704
[ 0.236366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.236397] io scheduler noop registered
[ 0.236400] io scheduler deadline registered
[ 0.236419] io scheduler cfq registered (default)
[ 0.236609] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.236752] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.236897] pcieport 0000:04:00.0: setting latency timer to 64
[ 0.237009] pcieport 0000:04:00.1: setting latency timer to 64
[ 0.237149] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 0.237152] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.237156] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 0.237178] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 0.237181] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.237183] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 0.237188] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
[ 0.237222] pcieport 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.237227] pcie_pme 0000:04:00.0:pcie01: service driver pcie_pme loaded
[ 0.237261] pcieport 0000:04:00.1: Signaling PME through PCIe PME interrupt
[ 0.237265] pcie_pme 0000:04:00.1:pcie01: service driver pcie_pme loaded
[ 0.237289] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.237364] pciehp 0000:00:02.0:pcie04: HPC vendor_id 1106 device_id a238 ss_vid 0 ss_did 0
[ 0.237387] pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
[ 0.237399] pciehp 0000:00:03.0:pcie04: HPC vendor_id 1106 device_id c238 ss_vid 0 ss_did 0
[ 0.237420] pciehp 0000:00:03.0:pcie04: service driver pciehp loaded
[ 0.237429] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.237609] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.237616] ACPI: Power Button [PWRB]
[ 0.237683] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.237687] ACPI: Power Button [PWRF]
[ 0.237744] ACPI: Fan [FAN] (on)
[ 0.238223] ACPI: acpi_idle registered with cpuidle
[ 0.241140] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.241143] ACPI: Thermal Zone [THRM] (40 C)
[ 0.241221] ERST: Table is not found!
[ 0.261703] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.264174] isapnp: Scanning for PnP cards...
[ 0.353787] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.376599] Linux agpgart interface v0.103
[ 0.378312] brd: module loaded
[ 0.378964] loop: module loaded
[ 0.379081] i2c-core: driver [adp5520] using legacy suspend method
[ 0.379083] i2c-core: driver [adp5520] using legacy resume method
[ 0.379277] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.379345] pata_acpi 0000:00:0f.0: PCI INT B disabled
[ 0.379386] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.379399] pata_acpi 0000:03:00.1: PCI INT B -> GSI 29 (level, low) -> IRQ 29
[ 0.379418] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 0.379429] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 0.379860] Fixed MDIO Bus: probed
[ 0.379907] PPP generic driver version 2.4.2
[ 0.379954] tun: Universal TUN/TAP device driver, 1.6
[ 0.379956] tun: (C) 1999-2004 Max Krasnyansky
[ 0.384215] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.384255] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.384278] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.384324] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 0.384372] ehci_hcd 0000:00:10.4: debug port 1
[ 0.384389] ehci_hcd 0000:00:10.4: irq 22, io mem 0xfdffe000
[ 0.427975] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.504349] hub 1-0:1.0: USB hub found
[ 0.504357] hub 1-0:1.0: 8 ports detected
[ 0.504473] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.504494] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.504563] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.504575] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.504625] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.504655] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000f900
[ 0.504789] hub 2-0:1.0: USB hub found
[ 0.504793] hub 2-0:1.0: 2 ports detected
[ 0.504865] uhci_hcd 0000:00:10.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.504872] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.504915] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.504941] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000f800
[ 0.505076] hub 3-0:1.0: USB hub found
[ 0.505080] hub 3-0:1.0: 2 ports detected
[ 0.505150] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.505156] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.505196] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 0.505248] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f700
[ 0.505382] hub 4-0:1.0: USB hub found
[ 0.505386] hub 4-0:1.0: 2 ports detected
[ 0.505469] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.505476] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.505514] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 0.505560] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000f600
[ 0.505693] hub 5-0:1.0: USB hub found
[ 0.505697] hub 5-0:1.0: 2 ports detected
[ 0.505840] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.508228] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.508237] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.508414] mousedev: PS/2 mouse device common for all mice
[ 0.508572] rtc_cmos 00:05: RTC can wake from S4
[ 0.508625] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.508672] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.508796] device-mapper: uevent: version 1.0.3
[ 0.508894] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.512354] device-mapper: multipath: version 1.2.0 loaded
[ 0.512359] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.512521] EISA: Probing bus 0 at eisa.0
[ 0.512527] EISA: Cannot allocate resource for mainboard
[ 0.512530] Cannot allocate resource for EISA slot 1
[ 0.512533] Cannot allocate resource for EISA slot 2
[ 0.512535] Cannot allocate resource for EISA slot 3
[ 0.512538] Cannot allocate resource for EISA slot 4
[ 0.512540] Cannot allocate resource for EISA slot 5
[ 0.512543] Cannot allocate resource for EISA slot 6
[ 0.512545] Cannot allocate resource for EISA slot 7
[ 0.512547] Cannot allocate resource for EISA slot 8
[ 0.512550] EISA: Detected 0 cards.
[ 0.512629] cpuidle: using governor ladder
[ 0.512632] cpuidle: using governor menu
[ 0.512927] TCP cubic registered
[ 0.513074] NET: Registered protocol family 10
[ 0.513660] NET: Registered protocol family 17
[ 0.513682] Registering the dns_resolver key type
[ 0.513711] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ (1 cpu cores) (version 2.20.00)
[ 0.513741] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20110112/processor_perflib-322)
[ 0.521327] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 0.521329] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[ 0.528297] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20110112/processor_perflib-322)
[ 0.528314] Using IPI No-Shortcut mode
[ 0.528493] PM: Hibernation image not present or could not be loaded.
[ 0.528508] registered taskstats version 1
[ 0.528882] Magic number: 7:54:395
[ 0.529039] rtc_cmos 00:05: setting system clock to 2011-08-16 19:23:44 UTC (1313522624)
[ 0.529043] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.529045] EDD information not available.
[ 0.831925] isapnp: No Plug & Play device found
[ 0.944112] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 0.987449] Freeing initrd memory: 12552k freed
[ 1.002283] Freeing unused kernel memory: 700k freed
[ 1.003066] Write protecting the kernel text: 5192k
[ 1.003105] Write protecting the kernel read-only data: 2148k
[ 1.029878] udev[59]: starting version 167
[ 1.155884] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 29 (level, low) -> IRQ 29
[ 1.155940] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.183980] pata_via 0000:00:0f.1: version 0.3.4
[ 1.188051] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 1.200095] Refined TSC clocksource calibration: 2000.070 MHz.
[ 1.200104] Switching to clocksource tsc
[ 1.239103] scsi0 : pata_jmicron
[ 1.241703] scsi1 : pata_jmicron
[ 1.241796] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 29
[ 1.241800] ata2: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 29
[ 1.286553] Floppy drive(s): fd0 is 1.44M
[ 1.287519] scsi2 : pata_via
[ 1.289939] scsi3 : pata_via
[ 1.291433] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.291437] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.317732] FDC 0 is a post-1991 82077
[ 1.342195] via-rhine.c:v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 1.342242] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.342815] eth0: VIA Rhine II at 0xfdffd000, 00:1b:fc:09:b3:b4, IRQ 23.
[ 1.343524] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
[ 1.349937] ahci 0000:00:0f.0: version 3.0
[ 1.349956] ahci 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.349996] ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ
[ 1.349999] ahci 0000:00:0f.0: controller can't do PMP, turning off CAP_PMP
[ 1.350075] ahci 0000:00:0f.0: PCI: Disallowing DAC for device
[ 1.350103] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 1.350108] ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part
[ 1.366297] scsi4 : ahci
[ 1.368539] scsi5 : ahci
[ 1.373032] scsi6 : ahci
[ 1.373561] usbcore: registered new interface driver uas
[ 1.373573] scsi7 : ahci
[ 1.373772] ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff100 irq 21
[ 1.373776] ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 21
[ 1.373779] ata7: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 21
[ 1.373783] ata8: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 21
[ 1.373907] ahci 0000:03:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 1.373986] ahci 0000:03:00.0: PCI: Disallowing DAC for device
[ 1.388030] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.388034] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.388041] ahci 0000:03:00.0: setting latency timer to 64
[ 1.388908] scsi8 : ahci
[ 1.389064] scsi9 : ahci
[ 1.389184] ata9: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 28
[ 1.389189] ata10: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 28
[ 1.452360] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4160B, A306, max UDMA/66
[ 1.468221] ata3.00: configured for UDMA/66
[ 1.566815] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4160B A306 PQ: 0 ANSI: 5
[ 1.572705] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.572709] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.572850] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.572936] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 1.672015] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 1.692018] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.692048] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.692072] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.692094] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.708020] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.708051] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.744494] ata4.00: native sectors (39102335) is smaller than sectors (39102336)
[ 1.744500] ata4.00: ATA-5: ST320413A, 3.39, max UDMA/100
[ 1.744503] ata4.00: 39102336 sectors, multi 16: LBA
[ 1.744679] ata4.01: ATA-7: Maxtor 6Y120P0, YAR41BW0, max UDMA/133
[ 1.744682] ata4.01: 240121728 sectors, multi 16: LBA
[ 1.760388] ata4.00: configured for UDMA/100
[ 1.776372] ata4.01: configured for UDMA/133
[ 1.776482] scsi 3:0:0:0: Direct-Access ATA ST320413A 3.39 PQ: 0 ANSI: 5
[ 1.776690] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1.776799] sd 3:0:0:0: [sda] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
[ 1.777000] sd 3:0:0:0: [sda] Write Protect is off
[ 1.777004] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.777028] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.796471] sda: sda1
[ 1.796640] scsi 3:0:1:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5
[ 1.796818] sd 3:0:1:0: Attached scsi generic sg2 type 0
[ 1.797241] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.797264] sd 3:0:1:0: [sdb] 240121728 512-byte logical blocks: (122 GB/114 GiB)
[ 1.797328] sd 3:0:1:0: [sdb] Write Protect is off
[ 1.797332] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.797354] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.842289] sdb: sdb1 < sdb5 sdb6 sdb7 >
[ 1.842759] sd 3:0:1:0: [sdb] Attached SCSI disk
[ 1.875973] Initializing USB Mass Storage driver...
[ 1.877215] usbcore: registered new interface driver usb-storage
[ 1.877221] USB Mass Storage support registered.
[ 1.888888] scsi10 : usb-storage 1-3:1.0
[ 1.891520] usbcore: registered new interface driver ums-cypress
[ 1.926533] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input2
[ 1.926783] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:10.0-1/input0
[ 1.927049] usbcore: registered new interface driver usbhid
[ 1.927052] usbhid: USB HID core driver
[ 2.088014] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.265063] hub 3-2:1.0: USB hub found
[ 2.266984] hub 3-2:1.0: 4 ports detected
[ 2.495445] EXT3-fs: barriers not enabled
[ 2.506237] kjournald starting. Commit interval 5 seconds
[ 2.506271] EXT3-fs (sdb5): mounted filesystem with ordered data mode
[ 2.550002] usb 3-2.1: new low speed USB device using uhci_hcd and address 3
[ 2.713436] input: Cypress WirelessUSB as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2.1/3-2.1:1.0/input/input3
[ 2.713531] generic-usb 0003:099A:7202.0002: input,hidraw1: USB HID v1.11 Keyboard [Cypress WirelessUSB] on usb-0000:00:10.1-2.1/input0
[ 2.747705] input: Cypress WirelessUSB as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2.1/3-2.1:1.1/input/input4
[ 2.747883] generic-usb 0003:099A:7202.0003: input,hiddev0,hidraw2: USB HID v1.11 Mouse [Cypress WirelessUSB] on usb-0000:00:10.1-2.1/input1
[ 2.821997] usb 3-2.2: new full speed USB device using uhci_hcd and address 4
[ 2.901029] scsi 10:0:0:0: Direct-Access SAMSUNG HM120JC 0000 PQ: 0 ANSI: 0
[ 2.901560] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 2.902001] sd 10:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.902872] sd 10:0:0:0: [sdc] Write Protect is off
[ 2.902876] sd 10:0:0:0: [sdc] Mode Sense: 27 00 00 00
[ 2.902878] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 2.904496] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 3.049987] usb 3-2.4: new low speed USB device using uhci_hcd and address 5
[ 3.207550] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2.4/3-2.4:1.0/input/input5
[ 3.207652] generic-usb 0003:03F0:0024.0004: input,hidraw3: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:10.1-2.4/input0
[ 3.379025] sdc: sdc1
[ 3.380689] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 3.380694] sd 10:0:0:0: [sdc] Attached SCSI disk
[ 21.769623] Adding 1558524k swap on /dev/sdb6. Priority:-1 extents:1 across:1558524k
[ 21.825121] udev[333]: starting version 167
[ 21.880488] lp: driver loaded but no devices found
[ 21.882918] Disabling lock debugging due to kernel taint
[ 21.938394] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
[ 22.272084] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[ 22.372258] EXT3-fs (sdb5): using internal journal
[ 22.397119] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.427352] gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 795kHz
[ 22.445825] parport_pc 00:0a: reported by Plug and Play ACPI
[ 22.445905] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 22.453549] ndiswrapper: driver sis163u (OEM,11/29/2004,5.1.1039.1020) loaded
[ 22.462790] EXT3-fs: barriers not enabled
[ 22.473275] kjournald starting. Commit interval 5 seconds
[ 22.474117] EXT3-fs (sdb7): using internal journal
[ 22.474126] EXT3-fs (sdb7): mounted filesystem with ordered data mode
[ 22.597349] lp0: using parport0 (interrupt-driven).
[ 22.630399] type=1400 audit(1313515446.595:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=613 comm="apparmor_parser"
[ 22.630952] type=1400 audit(1313515446.595:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=613 comm="apparmor_parser"
[ 22.631253] type=1400 audit(1313515446.595:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=613 comm="apparmor_parser"
[ 22.966060] wlan0: ethernet device 00:40:f4:e1:bf:42 using NDIS driver: sis163u, version: 0x1000000, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0457:0163.F.conf
[ 22.967294] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
[ 23.249782] usbcore: registered new interface driver ndiswrapper
[ 23.637360] Linux video capture interface: v2.00
[ 23.714807] gspca: v2.12.0 registered
[ 25.051184] ppdev: user-space parallel port driver
[ 25.063694] gspca: probing 046d:08da
[ 25.351708] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 25.351722] nvidia 0000:02:00.0: setting latency timer to 64
[ 25.351729] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 25.358287] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.06 Mon Apr 18 14:54:25 PDT 2011
[ 25.500073] ENS1371 0000:07:0d.0: BAR 0: set to [io 0xcf00-0xcf3f] (PCI address [0xcf00-0xcf3f])
[ 25.500105] ENS1371 0000:07:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 25.504060] HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 25.504068] hda_intel: position_fix set to 1 for device 1043:81e7
[ 25.504137] HDA Intel 0000:04:01.0: setting latency timer to 64
[ 25.738178] hda_codec: ALC660: BIOS auto-probing.
[ 26.690236] zc3xx: probe 2wr ov vga 0x0000
[ 27.087269] zc3xx: probe sensor -> 0011
[ 27.087274] zc3xx: Find Sensor HV7131R
[ 27.090234] input: zc3xx as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2.2/input/input6
[ 27.091285] gspca: video0 created
[ 27.092383] usbcore: registered new interface driver zc3xx
[ 27.143709] usbcore: registered new interface driver snd-usb-audio
[ 29.386232] vesafb: framebuffer at 0xf9000000, mapped to 0xf9b80000, using 1920k, total 1920k
[ 29.386237] vesafb: mode is 800x600x32, linelength=3200, pages=0
[ 29.386240] vesafb: scrolling: redraw
[ 29.386245] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 29.386449] Console: switching to colour frame buffer device 100x37
[ 29.386472] fb0: VESA VGA frame buffer device
[ 29.670400] type=1400 audit(1313515453.635:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1046 comm="apparmor_parser"
[ 29.684581] type=1400 audit(1313515453.651:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1046 comm="apparmor_parser"
[ 29.731766] type=1400 audit(1313515453.695:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1059 comm="apparmor_parser"
[ 29.743738] type=1400 audit(1313515453.707:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1064 comm="apparmor_parser"
[ 29.748545] type=1400 audit(1313515453.715:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1064 comm="apparmor_parser"
[ 29.748832] type=1400 audit(1313515453.715:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1064 comm="apparmor_parser"
[ 29.785227] type=1400 audit(1313515453.751:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1066 comm="apparmor_parser"
[ 29.797539] type=1400 audit(1313515453.763:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1066 comm="apparmor_parser"
[ 29.807073] type=1400 audit(1313515453.771:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1066 comm="apparmor_parser"
[ 29.826801] type=1400 audit(1313515453.791:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1132 comm="apparmor_parser"
[ 29.941554] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 29.956732] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 30.377303] vboxdrv: Found 1 processor cores.
[ 30.382086] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 30.382092] vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
[ 30.724046] ioremap error for 0x3fee3000-0x3fee4000, requested 0x10, got 0x0
[ 38.240746] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
[ 40.312008] eth0: no IPv6 routers present
[ 85.877677] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 95.945315] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 96.256023] wlan0: no IPv6 routers present
[ 102.209406] EXT3-fs: barriers not enabled
[ 102.234571] kjournald starting. Commit interval 5 seconds
[ 102.234673] EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
[ 102.235262] EXT3-fs (sdc1): using internal journal
[ 102.235268] EXT3-fs (sdc1): mounted filesystem with ordered data mode