dmesg - 20110726Byte1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.el6.x86_64 (mockbuild@c6b6.centos.org) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Fri May 20 03:51:51 BST 2011
Command line: ro root=/dev/mapper/vg_intranet-lv_root rd_LVM_LV=vg_intranet/lv_root rd_LVM_LV=vg_intranet/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us-acentos crashkernel=auto rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000006ffb0000 (usable)
BIOS-e820: 000000006ffb0000 - 000000006ffc0000 (ACPI data)
BIOS-e820: 000000006ffc0000 - 000000006fff0000 (ACPI NVS)
BIOS-e820: 000000006fff0000 - 0000000070000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x6ffb0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFFC0000000 write-back
1 base 000040000000 mask FFFFE0000000 write-back
2 base 000060000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000006ffb0000
0000000000 - 0040000000 page 1G
0040000000 - 006fe00000 page 2M
006fe00000 - 006ffb0000 page 4k
kernel direct mapping tables up to 6ffb0000 @ 10000-13000
RAMDISK: 372c4000 - 37fef36c
ACPI: RSDP 00000000000f96a0 00014 (v00 ACPIAM)
ACPI: RSDT 000000006ffb0000 00040 (v01 A_M_I OEMRSDT 03001104 MSFT 00000097)
ACPI: FACP 000000006ffb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
ACPI: DSDT 000000006ffb0460 048D5 (v01 AS509 AS509101 00000101 INTL 20051117)
ACPI: FACS 000000006ffc0000 00040
ACPI: APIC 000000006ffb0390 00090 (v01 A_M_I OEMAPIC 03001104 MSFT 00000097)
ACPI: MCFG 000000006ffb0420 0003C (v01 A_M_I OEMMCFG 03001104 MSFT 00000097)
ACPI: OEMB 000000006ffc0040 00061 (v01 A_M_I AMI_OEM 03001104 MSFT 00000097)
ACPI: SRAT 000000006ffb4d40 000A0 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: AAFT 000000006ffb4de0 00027 (v01 A_M_I OEMAAFT 03001104 MSFT 00000097)
ACPI: SSDT 000000006ffb4e10 00458 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-80000000
NUMA: Allocated memnodemap from 12000 - 13040
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-000000006ffb0000
NODE_DATA [0000000000013040 - 000000000004703f]
bootmap [0000000000048000 - 0000000000055ff7] pages e
(8 early reservations) ==> bootmem [0000000000 - 006ffb0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001c9eff8] TEXT DATA BSS ==> [0001000000 - 0001c9eff8]
#3 [00372c4000 - 0037fef36c] RAMDISK ==> [00372c4000 - 0037fef36c]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#5 [0001c9f000 - 0001c9f12f] BRK ==> [0001c9f000 - 0001c9f12f]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000012000 - 0000013040] MEMNODEMAP ==> [0000012000 - 0000013040]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea0000000000-ffffea00019fffff] PMD -> [ffff880002200000-ffff880003bfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0006ffb0
On node 0 totalpages: 458559
DMA zone: 56 pages used for memmap
DMA zone: 102 pages reserved
DMA zone: 3825 pages, LIFO batch:0
DMA32 zone: 6215 pages used for memmap
DMA32 zone: 448361 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 6 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
Allocating PCI resources starting at 70000000 (gap: 70000000:8ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880001e00000 s95064 r8192 d23720 u262144
pcpu-alloc: s95064 r8192 d23720 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 452186
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/vg_intranet-lv_root rd_LVM_LV=vg_intranet/lv_root rd_LVM_LV=vg_intranet/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us-acentos rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 1779948k/1834688k available (4935k kernel code, 452k absent, 54288k reserved, 3927k data, 1220k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:456
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 18350080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2812.560 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.11 BogoMIPS (lpj=2812556)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20276 entries in 80 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) II X2 240 Processor stepping 03
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (11250.17 BogoMIPS).
Testing NMI watchdog ... OK.
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2600 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 0000000080000000 aka 2048M
Fam 10h mmconf [fc000000, fdffffff]
node 0 link 0: mmio [fc000000, fdffffff] ==> none
node 0 link 0: mmio [80000000, fbffffff]
node 0 link 0: mmio [fe000000, fe0bffff]
node 0 link 0: mmio [a0000, bffff]
bus: [00,07] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [80000000, fbffffff]
bus: 00 index 2 mmio: [fe000000, fcffffffff]
bus: 00 index 3 mmio: [a0000, bffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
PCI: MCFG area at fc000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at fc000000 - fdffffff
ACPI Warning: Incorrect checksum in table [OEMB] - D7, should be D2 (20090903/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
pci 0000:00:01.1: reg 10 io port: [0xec00-0xec3f]
pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xfbfff000-0xfbffffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xfbffec00-0xfbffecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xfbff8000-0xfbffbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:07.0: reg 10 32bit mmio: [0xfbffd000-0xfbffdfff]
pci 0000:00:07.0: reg 14 io port: [0xe480-0xe487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0xe400-0xe407]
pci 0000:00:08.0: reg 14 io port: [0xe080-0xe083]
pci 0000:00:08.0: reg 18 io port: [0xe000-0xe007]
pci 0000:00:08.0: reg 1c io port: [0xdc00-0xdc03]
pci 0000:00:08.0: reg 20 io port: [0xd880-0xd88f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xfbffc000-0xfbffcfff]
pci 0000:00:08.1: reg 10 io port: [0xd800-0xd807]
pci 0000:00:08.1: reg 14 io port: [0xd480-0xd483]
pci 0000:00:08.1: reg 18 io port: [0xd400-0xd407]
pci 0000:00:08.1: reg 1c io port: [0xd080-0xd083]
pci 0000:00:08.1: reg 20 io port: [0xd000-0xd00f]
pci 0000:00:08.1: reg 24 32bit mmio: [0xfbff7000-0xfbff7fff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:00:0d.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:0d.0: reg 1c 64bit mmio: [0xf9000000-0xf9ffffff]
pci 0000:00:0d.0: reg 30 32bit mmio pref: [0xfbfc0000-0xfbfdffff]
pci 0000:00:04.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
ACPI Warning for \_SB_.LATA._CRS: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
ACPI Error (uteval-0307): Return object type is incorrect [\_SB_.LATA._CRS] (Node ffff88006d0385b0), AE_TYPE
ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 4 (20090903/uteval-313)
ACPI Exception: AE_TYPE, Evaluating _CRS (20090903/pci_link-282)
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x500-0x57f has been reserved
system 00:06: ioport range 0x580-0x5ff has been reserved
system 00:06: ioport range 0x800-0x87f has been reserved
system 00:06: ioport range 0x880-0x8ff has been reserved
system 00:06: ioport range 0xd00-0xd7f has been reserved
system 00:06: ioport range 0xd80-0xdff has been reserved
system 00:06: ioport range 0x1100-0x117f has been reserved
system 00:06: ioport range 0x1180-0x11ff has been reserved
system 00:06: iomem range 0xfec80000-0x1fd93ffff could not be reserved
system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0a: ioport range 0x280-0x28f has been reserved
system 00:0a: ioport range 0x290-0x29f has been reserved
system 00:0b: iomem range 0xfc000000-0xfdffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved
system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: bridge window [io disabled]
pci 0000:00:04.0: bridge window [mem disabled]
pci 0000:00:04.0: bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem disabled]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 03-03]
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem disabled]
pci 0000:00:0b.0: bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 04-04]
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: bridge window [io disabled]
pci 0000:00:0c.0: bridge window [mem disabled]
pci 0000:00:0c.0: bridge window [mem pref disabled]
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 13484k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1311609996.474:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3502
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key B5BD89AA2E85EC04
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0b.0: setting latency timer to 64
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.0
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 23, io mem 0xfbffec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xfbfff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-71.el6.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:02: setting system clock to 2011-07-25 16:06:37 UTC (1311609997)
Initalizing network drop monitor service
Freeing unused kernel memory: 1220k freed
Write protecting the kernel read-only data: 7176k
dracut: dracut-004-32.el6
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 21
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
nouveau 0000:00:0d.0: PCI INT A -> Link[LMC9] -> GSI 21 (level, low) -> IRQ 21
nouveau 0000:00:0d.0: setting latency timer to 64
[drm] nouveau 0000:00:0d.0: failed to evaluate _DSM: 5
[drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2)
[drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PROM
[drm] nouveau 0000:00:0d.0: ... BIOS signature not found
[drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:00:0d.0: ... appears to be valid
[drm] nouveau 0000:00:0d.0: BIT BIOS found
[drm] nouveau 0000:00:0d.0: Bios version 05.61.32.28
[drm] nouveau 0000:00:0d.0: BIT table 'd' not found
[drm] nouveau 0000:00:0d.0: Found Display Configuration Block version 3.0
[drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023
[drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 942b0003
[drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2
[drm] nouveau 0000:00:0d.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[drm] nouveau 0000:00:0d.0: 1: 0x00001131: type 0x31 idx 1 tag 0x07
[drm] nouveau 0000:00:0d.0: 2: 0x00000110: type 0x10 idx 2 tag 0xff
[drm] nouveau 0000:00:0d.0: 3: 0x00000111: type 0x11 idx 3 tag 0xff
[drm] nouveau 0000:00:0d.0: 4: 0x00000113: type 0x13 idx 4 tag 0xff
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xD9C9
[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D =======
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xDB17
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xDB18
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xDC9A
[drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xDCE3
[drm] nouveau 0000:00:0d.0: Detected 256MiB VRAM
[TTM] Zone kernel: Available graphics memory: 897328 kiB.
[drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
[drm] nouveau 0000:00:0d.0: Initial CRTC_OWNER is 0
[drm] nouveau 0000:00:0d.0: Saving VGA fonts
[drm] nouveau 0000:00:0d.0: unknown connector type: 0xff!!
[drm] nouveau 0000:00:0d.0: Allocating FIFO number 0
[drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0)
usb 1-6: new high speed USB device using ehci_hcd and address 3
[drm] nouveau 0000:00:0d.0: allocated 1280x1024 fb: 0x49000, bo ffff8800690bde00
fbcon: nouveaufb (fb0) is primary device
[drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A
Console: switching to colour frame buffer device 160x64
fb0: nouveaufb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized nouveau 0.0.16 20090420 for 0000:00:0d.0 on minor 0
usb 1-6: New USB device found, idVendor=090c, idProduct=6300
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: USB2.0 Card Reader
usb 1-6: Manufacturer: SMI
usb 1-6: SerialNumber: 12345678901234567890
usb 1-6: configuration #1 chosen from 1 choice
dracut: Starting plymouth daemon
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 2-3: new low speed USB device using ohci_hcd and address 2
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:08.0: setting latency timer to 64
scsi1 : sata_nv
scsi2 : sata_nv
ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 20
ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 20
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:08.1: setting latency timer to 64
scsi3 : sata_nv
scsi4 : sata_nv
ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 23
ata4: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 23
usb 2-3: New USB device found, idVendor=045e, idProduct=0040
usb 2-3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-3: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 2-3: Manufacturer: Microsoft
usb 2-3: configuration #1 chosen from 1 choice
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4
generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-3/input0
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: ST3500413AS, JC45, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 300)
scsi 3:0:0:0: Direct-Access ATA ST3500413AS JC45 PQ: 0 ANSI: 5
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
ata4.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
pata_acpi 0000:00:06.0: setting latency timer to 64
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi5 : pata_amd
scsi6 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata6: port disabled. ignoring.
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes vg_intranet/lv_root vg_intranet/lv_swap
dracut: inactive '/dev/vg_intranet/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_intranet/lv_home' [411.83 GiB] inherit
dracut: inactive '/dev/vg_intranet/lv_swap' [3.44 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_intranet-lv_root
dracut: Loading SELinux policy
type=1404 audit(1311610000.372:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 199690 rules.
SELinux: 2048 avtab hash slots, 199690 rules.
SELinux: 9 users, 13 roles, 3323 types, 168 bools, 1 sens, 1024 cats
SELinux: 77 classes, 199690 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1311610000.947:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
usb-storage: device scan complete
scsi 0:0:0:0: Direct-Access SMI Reader 1.00 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sdb] Attached SCSI removable disk
i2c i2c-1: nForce2 SMBus adapter at 0x600
i2c i2c-2: nForce2 SMBus adapter at 0x700
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:05.0: setting latency timer to 64
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
forcedeth 0000:00:07.0: setting latency timer to 64
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:22:af:12:ae
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
EDAC MC: Ver: 2.1.0 May 20 2011
EDAC amd64_edac: Ver: 3.3.0 May 20 2011
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
sd 3:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
sd 0:0:0:0: Attached scsi generic sg2 type 0
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
EXT4-fs (sda1): mounted filesystem with ordered data mode
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 3604472k swap on /dev/mapper/vg_intranet-lv_swap. Priority:-1 extents:1 across:3604472k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
powernow-k8: Found 1 AMD Athlon(tm) II X2 240 Processor processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2800 MHz)
powernow-k8: 1 : pstate 1 (2100 MHz)
powernow-k8: 2 : pstate 2 (1600 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
eth0: no IPv6 routers present
SELinux: 2048 avtab hash slots, 200977 rules.
SELinux: 2048 avtab hash slots, 200977 rules.
SELinux: 9 users, 13 roles, 3327 types, 173 bools, 1 sens, 1024 cats
SELinux: 77 classes, 200977 rules
SELinux: Context system_u:unconfined_r:iptables_t:s0-s0:c0.c1023 became invalid (unmapped).
SELinux: Context unconfined_u:unconfined_r:iptables_t:s0-s0:c0.c1023 became invalid (unmapped).
[drm] nouveau 0000:00:0d.0: Setting dpms mode 1 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Setting dpms mode 1 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)
i2c /dev entries driver
w83627ehf: Found W83627DHG-P chip at 0x290
[drm] nouveau 0000:00:0d.0: Setting dpms mode 1 on vga encoder (output 0)
[drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0)