dmesg - 1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-32-generic (buildd@roseapple) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #62-Ubuntu SMP Wed Apr 20 21:54:21 UTC 2011 (Ubuntu 2.6.32-32.62-generic 2.6.32.38+drm33.16)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] modified: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] modified: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] modified: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 366ca000 - 3735c964
[ 0.000000] ACPI: RSDP 000fbaa0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT cfe90100 0005C (v01 050410 XSDT1420 20100504 MSFT 00000097)
[ 0.000000] ACPI: FACP cfe90290 000F4 (v03 050410 FACP1420 20100504 MSFT 00000097)
[ 0.000000] ACPI: DSDT cfe90450 0F42D (v01 A1608 A1608000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS cfea8000 00040
[ 0.000000] ACPI: APIC cfe90390 0007C (v01 050410 APIC1420 20100504 MSFT 00000097)
[ 0.000000] ACPI: MCFG cfe90410 0003C (v01 050410 OEMMCFG 20100504 MSFT 00000097)
[ 0.000000] ACPI: OEMB cfea8040 00072 (v01 050410 OEMB1420 20100504 MSFT 00000097)
[ 0.000000] ACPI: SRAT cfe9f8a0 000E8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET cfe9f990 00038 (v01 050410 OEMHPET 20100504 MSFT 00000097)
[ 0.000000] ACPI: SSDT cfe9f9d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2438MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008deef8] TEXT DATA BSS ==> [0000100000 - 00008deef8]
[ 0.000000] #4 [00366ca000 - 003735c964] RAMDISK ==> [00366ca000 - 003735c964]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [00008df000 - 00008e2271] BRK ==> [00008df000 - 00008e2271]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000cfe90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfe90
[ 0.000000] On node 0 totalpages: 851487
[ 0.000000] free_area_init_node: node 0, pgdat c07987c0, node_mem_map c1001200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4878 pages used for memmap
[ 0.000000] HighMem zone: 619396 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:2ff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36312 r0 d21032 u524288
[ 0.000000] pcpu-alloc: s36312 r0 d21032 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844833
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 17031680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000cfe90)
[ 0.000000] Memory: 3339148k/3406400k available (4674k kernel code, 65432k reserved, 2120k data, 668k init, 2497096k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc084a000 ( 668 kB)
[ 0.000000] .data : 0xc0590ad7 - 0xc07a2d88 (2120 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590ad7 (4674 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:456
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2809.240 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.48 BogoMIPS (lpj=11236960)
[ 0.004015] Security Framework initialized
[ 0.004026] AppArmor: AppArmor initialized
[ 0.004031] Mount-cache hash table entries: 512
[ 0.004101] Initializing cgroup subsys ns
[ 0.004103] Initializing cgroup subsys cpuacct
[ 0.004106] Initializing cgroup subsys memory
[ 0.004110] Initializing cgroup subsys devices
[ 0.004112] Initializing cgroup subsys freezer
[ 0.004113] Initializing cgroup subsys net_cls
[ 0.004125] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004127] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004129] CPU: Physical Processor ID: 0
[ 0.004130] CPU: Processor Core ID: 0
[ 0.004132] mce: CPU supports 6 MCE banks
[ 0.004139] using C1E aware idle routine
[ 0.004142] Performance Events: AMD PMU driver.
[ 0.004146] ... version: 0
[ 0.004148] ... bit width: 48
[ 0.004149] ... generic registers: 4
[ 0.004150] ... value mask: 0000ffffffffffff
[ 0.004152] ... max period: 00007fffffffffff
[ 0.004153] ... fixed-purpose events: 0
[ 0.004155] ... event mask: 000000000000000f
[ 0.004157] Checking 'hlt' instruction... OK.
[ 0.021562] ACPI: Core revision 20090903
[ 0.040006] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040009] ftrace: allocating 21723 entries in 43 pages
[ 0.044096] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044410] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084344] CPU0: AMD Athlon(tm) II X4 630 Processor stepping 02
[ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.172101] CPU1: AMD Athlon(tm) II X4 630 Processor stepping 02
[ 0.172141] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176017] System has AMD C1E enabled
[ 0.176052] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.176063] Switch to broadcast mode on CPU1
[ 0.008000] Initializing CPU#2
[ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 2
[ 0.264055] CPU2: AMD Athlon(tm) II X4 630 Processor stepping 02
[ 0.264095] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.268018] Switch to broadcast mode on CPU2
[ 0.268051] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.008000] Initializing CPU#3
[ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 3
[ 0.356094] CPU3: AMD Athlon(tm) II X4 630 Processor stepping 02
[ 0.356135] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.360019] Brought up 4 CPUs
[ 0.360021] Total of 4 processors activated (22475.00 BogoMIPS).
[ 0.360019] Switch to broadcast mode on CPU3
[ 0.360451] CPU0 attaching sched-domain:
[ 0.360455] domain 0: span 0-3 level MC
[ 0.360457] groups: 0 1 2 3
[ 0.360462] CPU1 attaching sched-domain:
[ 0.360463] domain 0: span 0-3 level MC
[ 0.360465] groups: 1 2 3 0
[ 0.360468] CPU2 attaching sched-domain:
[ 0.360470] domain 0: span 0-3 level MC
[ 0.360471] groups: 2 3 0 1
[ 0.360474] CPU3 attaching sched-domain:
[ 0.360476] domain 0: span 0-3 level MC
[ 0.360477] groups: 3 0 1 2
[ 0.360552] Switch to broadcast mode on CPU0
[ 0.360552] devtmpfs: initialized
[ 0.360552] regulator: core version 0.5
[ 0.360552] Time: 6:59:54 Date: 06/11/11
[ 0.360552] NET: Registered protocol family 16
[ 0.360552] EISA bus registered
[ 0.360552] ACPI: bus type pci registered
[ 0.360552] Trying to unpack rootfs image as initramfs...
[ 0.360552] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.360552] PCI: Not using MMCONFIG.
[ 0.360817] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.360819] PCI: Using configuration type 1 for base access
[ 0.360820] PCI: Using configuration type 1 for extended access
[ 0.361314] bio: create slab at 0
[ 0.361314] ACPI: EC: Look up EC in DSDT
[ 0.361566] ACPI Error (dswload-0781): [PRID] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.361571] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230)
[ 0.361579] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node c08d3824), AE_ALREADY_EXISTS
[ 0.361583] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error
[ 0.364051] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.483080] ACPI: Interpreter enabled
[ 0.483085] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.483105] ACPI: Using IOAPIC for interrupt routing
[ 0.483151] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.486497] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.486498] PCI: Using MMCONFIG for extended config space
[ 0.492532] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.492601] ACPI Warning: Incorrect checksum in table [OEMB] - C6, should be C5 (20090903/tbutils-314)
[ 0.492717] ACPI: No dock devices found.
[ 0.492842] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.492960] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.492962] pci 0000:00:09.0: PME# disabled
[ 0.492990] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.492993] pci 0000:00:0a.0: PME# disabled
[ 0.493058] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007]
[ 0.493064] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003]
[ 0.493069] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007]
[ 0.493075] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003]
[ 0.493081] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f]
[ 0.493086] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe3ffc00-0xfe3fffff]
[ 0.493101] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.493148] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe3fe000-0xfe3fefff]
[ 0.493209] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe3ff800-0xfe3ff8ff]
[ 0.493253] pci 0000:00:12.2: supports D1 D2
[ 0.493254] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.493257] pci 0000:00:12.2: PME# disabled
[ 0.493283] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe3fd000-0xfe3fdfff]
[ 0.493344] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe3ff400-0xfe3ff4ff]
[ 0.493387] pci 0000:00:13.2: supports D1 D2
[ 0.493389] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.493392] pci 0000:00:13.2: PME# disabled
[ 0.493468] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.493473] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.493479] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.493485] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.493490] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.493545] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe3f8000-0xfe3fbfff]
[ 0.493580] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.493584] pci 0000:00:14.2: PME# disabled
[ 0.493671] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe3fc000-0xfe3fcfff]
[ 0.493754] pci 0000:00:15.0: supports D1 D2
[ 0.493786] pci 0000:00:16.0: reg 10 32bit mmio: [0xfe3f7000-0xfe3f7fff]
[ 0.493847] pci 0000:00:16.2: reg 10 32bit mmio: [0xfe3ff000-0xfe3ff0ff]
[ 0.493890] pci 0000:00:16.2: supports D1 D2
[ 0.493892] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.493895] pci 0000:00:16.2: PME# disabled
[ 0.494026] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.494029] pci 0000:01:05.0: reg 14 io port: [0xb000-0xb0ff]
[ 0.494032] pci 0000:01:05.0: reg 18 32bit mmio: [0xfe5f0000-0xfe5fffff]
[ 0.494038] pci 0000:01:05.0: reg 24 32bit mmio: [0xfe400000-0xfe4fffff]
[ 0.494048] pci 0000:01:05.0: supports D1 D2
[ 0.494063] pci 0000:01:05.1: reg 10 32bit mmio: [0xfe5e8000-0xfe5ebfff]
[ 0.494079] pci 0000:01:05.1: supports D1 D2
[ 0.494141] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.494143] pci 0000:00:01.0: bridge 32bit mmio: [0xfe400000-0xfe5fffff]
[ 0.494146] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.494180] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe6fe000-0xfe6fffff]
[ 0.494222] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.494225] pci 0000:02:00.0: PME# disabled
[ 0.494308] pci 0000:00:09.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
[ 0.494372] pci 0000:03:00.0: reg 24 32bit mmio: [0xfe7fe000-0xfe7fffff]
[ 0.494400] pci 0000:03:00.0: PME# supported from D3hot
[ 0.494404] pci 0000:03:00.0: PME# disabled
[ 0.494442] pci 0000:03:00.1: reg 10 io port: [0xcc00-0xcc07]
[ 0.494449] pci 0000:03:00.1: reg 14 io port: [0xc880-0xc883]
[ 0.494455] pci 0000:03:00.1: reg 18 io port: [0xc800-0xc807]
[ 0.494462] pci 0000:03:00.1: reg 1c io port: [0xc480-0xc483]
[ 0.494468] pci 0000:03:00.1: reg 20 io port: [0xc400-0xc40f]
[ 0.494543] pci 0000:00:0a.0: bridge io port: [0xc000-0xcfff]
[ 0.494546] pci 0000:00:0a.0: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[ 0.494594] pci 0000:04:07.0: reg 10 32bit mmio: [0xfe8ff800-0xfe8fffff]
[ 0.494602] pci 0000:04:07.0: reg 14 io port: [0xdc00-0xdc7f]
[ 0.494652] pci 0000:04:07.0: supports D2
[ 0.494654] pci 0000:04:07.0: PME# supported from D2 D3hot D3cold
[ 0.494658] pci 0000:04:07.0: PME# disabled
[ 0.494697] pci 0000:00:14.4: transparent bridge
[ 0.494701] pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
[ 0.494704] pci 0000:00:14.4: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.494752] pci 0000:05:00.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.494771] pci 0000:05:00.0: reg 18 64bit mmio pref: [0xfdfff000-0xfdffffff]
[ 0.494785] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xfdff8000-0xfdffbfff]
[ 0.494793] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xfe9e0000-0xfe9fffff]
[ 0.494832] pci 0000:05:00.0: supports D1 D2
[ 0.494833] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.494837] pci 0000:05:00.0: PME# disabled
[ 0.494898] pci 0000:00:15.0: bridge io port: [0xe000-0xefff]
[ 0.494902] pci 0000:00:15.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.494907] pci 0000:00:15.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.494921] pci_bus 0000:00: on NUMA node 0
[ 0.494924] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.495100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.495167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.495211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.495279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.495356] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.499855] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 14 15)
[ 0.500020] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15)
[ 0.500192] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15)
[ 0.500362] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *10 11 14 15)
[ 0.500503] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.500628] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.500750] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 14 15)
[ 0.500876] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.500960] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.500964] vgaarb: loaded
[ 0.501039] SCSI subsystem initialized
[ 0.501148] libata version 3.00 loaded.
[ 0.501148] usbcore: registered new interface driver usbfs
[ 0.501148] usbcore: registered new interface driver hub
[ 0.501148] usbcore: registered new device driver usb
[ 0.501148] ACPI: WMI: Mapper loaded
[ 0.501148] PCI: Using ACPI for IRQ routing
[ 0.501148] NetLabel: Initializing
[ 0.501148] NetLabel: domain hash size = 128
[ 0.501148] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.501148] NetLabel: unlabeled traffic allowed by default
[ 0.501148] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.501148] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.502253] Switching to clocksource tsc
[ 0.503926] AppArmor: AppArmor Filesystem Enabled
[ 0.503926] pnp: PnP ACPI init
[ 0.503926] ACPI: bus type pnp registered
[ 0.504083] pnp: PnP ACPI: found 13 devices
[ 0.504085] ACPI: ACPI bus type pnp unregistered
[ 0.504087] PnPBIOS: Disabled by ACPI PNP
[ 0.504099] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.504101] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.504106] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.504108] system 00:09: ioport range 0x40b-0x40b has been reserved
[ 0.504110] system 00:09: ioport range 0x4d6-0x4d6 has been reserved
[ 0.504112] system 00:09: ioport range 0xc00-0xc01 has been reserved
[ 0.504114] system 00:09: ioport range 0xc14-0xc14 has been reserved
[ 0.504116] system 00:09: ioport range 0xc50-0xc51 has been reserved
[ 0.504118] system 00:09: ioport range 0xc52-0xc52 has been reserved
[ 0.504120] system 00:09: ioport range 0xc6c-0xc6c has been reserved
[ 0.504122] system 00:09: ioport range 0xc6f-0xc6f has been reserved
[ 0.504124] system 00:09: ioport range 0xcd0-0xcd1 has been reserved
[ 0.504126] system 00:09: ioport range 0xcd2-0xcd3 has been reserved
[ 0.504128] system 00:09: ioport range 0xcd4-0xcd5 has been reserved
[ 0.504130] system 00:09: ioport range 0xcd6-0xcd7 has been reserved
[ 0.504132] system 00:09: ioport range 0xcd8-0xcdf has been reserved
[ 0.504134] system 00:09: ioport range 0x800-0x89f has been reserved
[ 0.504136] system 00:09: ioport range 0xb00-0xb1f has been reserved
[ 0.504138] system 00:09: ioport range 0xb20-0xb3f has been reserved
[ 0.504140] system 00:09: ioport range 0x900-0x90f has been reserved
[ 0.504142] system 00:09: ioport range 0x910-0x91f has been reserved
[ 0.504144] system 00:09: ioport range 0xfe00-0xfefe has been reserved
[ 0.504147] system 00:09: iomem range 0xcff00000-0xcfffffff could not be reserved
[ 0.504149] system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.504152] system 00:09: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.504154] system 00:09: iomem range 0xfed80000-0xfed80fff has been reserved
[ 0.504158] system 00:0a: ioport range 0x230-0x23f has been reserved
[ 0.504160] system 00:0a: ioport range 0x290-0x29f has been reserved
[ 0.504162] system 00:0a: ioport range 0xf40-0xf4f has been reserved
[ 0.504164] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[ 0.504167] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.504171] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.504173] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[ 0.504175] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.504178] system 00:0c: iomem range 0x100000-0xcfefffff could not be reserved
[ 0.504180] system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.539040] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.539042] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.539044] pci 0000:00:01.0: MEM window: 0xfe400000-0xfe5fffff
[ 0.539047] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.539051] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.539052] pci 0000:00:09.0: IO window: disabled
[ 0.539055] pci 0000:00:09.0: MEM window: 0xfe600000-0xfe6fffff
[ 0.539057] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.539060] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:03
[ 0.539062] pci 0000:00:0a.0: IO window: 0xc000-0xcfff
[ 0.539065] pci 0000:00:0a.0: MEM window: 0xfe700000-0xfe7fffff
[ 0.539067] pci 0000:00:0a.0: PREFETCH window: disabled
[ 0.539070] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04
[ 0.539072] pci 0000:00:14.4: IO window: 0xd000-0xdfff
[ 0.539077] pci 0000:00:14.4: MEM window: 0xfe800000-0xfe8fffff
[ 0.539080] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.539086] pci 0000:00:15.0: PCI bridge, secondary bus 0000:05
[ 0.539088] pci 0000:00:15.0: IO window: 0xe000-0xefff
[ 0.539092] pci 0000:00:15.0: MEM window: 0xfe900000-0xfe9fffff
[ 0.539096] pci 0000:00:15.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.539108] alloc irq_desc for 17 on node -1
[ 0.539110] alloc kstat_irqs on node -1
[ 0.539113] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.539116] pci 0000:00:09.0: setting latency timer to 64
[ 0.539120] alloc irq_desc for 18 on node -1
[ 0.539121] alloc kstat_irqs on node -1
[ 0.539123] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.539126] pci 0000:00:0a.0: setting latency timer to 64
[ 0.539135] alloc irq_desc for 16 on node -1
[ 0.539136] alloc kstat_irqs on node -1
[ 0.539139] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.539142] pci 0000:00:15.0: setting latency timer to 64
[ 0.539146] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.539148] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.539150] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.539152] pci_bus 0000:01: resource 1 mem: [0xfe400000-0xfe5fffff]
[ 0.539154] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.539156] pci_bus 0000:02: resource 1 mem: [0xfe600000-0xfe6fffff]
[ 0.539158] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.539159] pci_bus 0000:03: resource 1 mem: [0xfe700000-0xfe7fffff]
[ 0.539161] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.539163] pci_bus 0000:04: resource 1 mem: [0xfe800000-0xfe8fffff]
[ 0.539165] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.539167] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.539169] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.539171] pci_bus 0000:05: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.539172] pci_bus 0000:05: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.539199] NET: Registered protocol family 2
[ 0.539271] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.539481] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.539866] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.540053] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.540055] TCP reno registered
[ 0.540120] NET: Registered protocol family 1
[ 1.376365] pci 0000:01:05.0: Boot video device
[ 1.376575] cpufreq-nforce2: No nForce2 chipset.
[ 1.376591] Scanning for low memory corruption every 60 seconds
[ 1.376659] audit: initializing netlink socket (disabled)
[ 1.376667] type=2000 audit(1307775595.376:1): initialized
[ 1.383167] highmem bounce pool size: 64 pages
[ 1.383171] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.384200] VFS: Disk quotas dquot_6.5.2
[ 1.384240] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.384627] fuse init (API version 7.13)
[ 1.384680] msgmni has been set to 1647
[ 1.384870] alg: No test for stdrng (krng)
[ 1.384939] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.384942] io scheduler noop registered
[ 1.384944] io scheduler anticipatory registered
[ 1.384945] io scheduler deadline registered
[ 1.384973] io scheduler cfq registered (default)
[ 1.385075] alloc irq_desc for 24 on node -1
[ 1.385076] alloc kstat_irqs on node -1
[ 1.385082] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
[ 1.385087] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.385146] alloc irq_desc for 25 on node -1
[ 1.385148] alloc kstat_irqs on node -1
[ 1.385152] pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X
[ 1.385155] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.385271] alloc irq_desc for 26 on node -1
[ 1.385272] alloc kstat_irqs on node -1
[ 1.385278] pcieport 0000:00:15.0: irq 26 for MSI/MSI-X
[ 1.385285] pcieport 0000:00:15.0: setting latency timer to 64
[ 1.385341] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.385355] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.385423] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.385425] ACPI: Power Button [PWRB]
[ 1.385455] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.385457] ACPI: Power Button [PWRF]
[ 1.386062] processor LNXCPU:00: registered as cooling_device0
[ 1.386339] processor LNXCPU:01: registered as cooling_device1
[ 1.386567] processor LNXCPU:02: registered as cooling_device2
[ 1.386789] processor LNXCPU:03: registered as cooling_device3
[ 1.388557] isapnp: Scanning for PnP cards...
[ 1.389468] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.389704] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.390351] brd: module loaded
[ 1.390631] loop: module loaded
[ 1.390687] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.390813] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.390836] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.390855] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.390860] alloc irq_desc for 19 on node -1
[ 1.390862] alloc kstat_irqs on node -1
[ 1.390866] pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.390880] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 1.390888] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 1.391077] Fixed MDIO Bus: probed
[ 1.391099] PPP generic driver version 2.4.2
[ 1.391119] tun: Universal TUN/TAP device driver, 1.6
[ 1.391120] tun: (C) 1999-2004 Max Krasnyansky
[ 1.391173] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.391221] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.391233] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.391253] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.391262] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.391280] ehci_hcd 0000:00:12.2: debug port 1
[ 1.391297] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe3ff800
[ 1.400308] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.400392] usb usb1: configuration #1 chosen from 1 choice
[ 1.400411] hub 1-0:1.0: USB hub found
[ 1.400417] hub 1-0:1.0: 5 ports detected
[ 1.400497] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.400514] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.400537] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.400547] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.400565] ehci_hcd 0000:00:13.2: debug port 1
[ 1.400577] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe3ff400
[ 1.405713] Freeing initrd memory: 12874k freed
[ 1.412327] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.412413] usb usb2: configuration #1 chosen from 1 choice
[ 1.412431] hub 2-0:1.0: USB hub found
[ 1.412437] hub 2-0:1.0: 5 ports detected
[ 1.412517] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.412531] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.412553] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.412563] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.412580] ehci_hcd 0000:00:16.2: debug port 1
[ 1.412592] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe3ff000
[ 1.424327] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.424407] usb usb3: configuration #1 chosen from 1 choice
[ 1.424427] hub 3-0:1.0: USB hub found
[ 1.424432] hub 3-0:1.0: 4 ports detected
[ 1.424502] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.424516] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.424529] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.424551] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.424573] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe3fe000
[ 1.484384] usb usb4: configuration #1 chosen from 1 choice
[ 1.484403] hub 4-0:1.0: USB hub found
[ 1.484412] hub 4-0:1.0: 5 ports detected
[ 1.484455] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.484469] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.484493] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.484508] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe3fd000
[ 1.544395] usb usb5: configuration #1 chosen from 1 choice
[ 1.544414] hub 5-0:1.0: USB hub found
[ 1.544457] hub 5-0:1.0: 5 ports detected
[ 1.544502] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.544516] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.544538] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.544553] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe3fc000
[ 1.604383] usb usb6: configuration #1 chosen from 1 choice
[ 1.604401] hub 6-0:1.0: USB hub found
[ 1.604446] hub 6-0:1.0: 2 ports detected
[ 1.604485] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.604499] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.604524] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.604541] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe3f7000
[ 1.664421] usb usb7: configuration #1 chosen from 1 choice
[ 1.664439] hub 7-0:1.0: USB hub found
[ 1.664483] hub 7-0:1.0: 4 ports detected
[ 1.664527] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.664582] PNP: No PS/2 controller found. Probing ports directly.
[ 1.665064] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.665074] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.665129] mice: PS/2 mouse device common for all mice
[ 1.665199] rtc_cmos 00:03: RTC can wake from S4
[ 1.665223] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.665243] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.665309] device-mapper: uevent: version 1.0.3
[ 1.665401] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.665490] device-mapper: multipath: version 1.1.0 loaded
[ 1.665492] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.665566] EISA: Probing bus 0 at eisa.0
[ 1.665587] Cannot allocate resource for EISA slot 6
[ 1.665589] Cannot allocate resource for EISA slot 7
[ 1.665590] Cannot allocate resource for EISA slot 8
[ 1.665592] EISA: Detected 0 cards.
[ 1.665719] cpuidle: using governor ladder
[ 1.665721] cpuidle: using governor menu
[ 1.665990] TCP cubic registered
[ 1.666085] NET: Registered protocol family 10
[ 1.666392] lo: Disabled Privacy Extensions
[ 1.666605] NET: Registered protocol family 17
[ 1.666642] powernow-k8: Found 1 AMD Athlon(tm) II X4 630 Processor processors (4 cpu cores) (version 2.20.00)
[ 1.666674] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 1.666675] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 1.666677] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 1.666678] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.679960] Using IPI No-Shortcut mode
[ 1.680029] PM: Resume from disk failed.
[ 1.680036] registered taskstats version 1
[ 1.680453] Magic number: 15:900:973
[ 1.680557] rtc_cmos 00:03: setting system clock to 2011-06-11 06:59:56 UTC (1307775596)
[ 1.680559] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.680561] EDD information not available.
[ 1.716347] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1.771954] isapnp: No Plug & Play device found
[ 1.771986] Freeing unused kernel memory: 668k freed
[ 1.772199] Write protecting the kernel text: 4676k
[ 1.772225] Write protecting the kernel read-only data: 1844k
[ 1.786085] udev: starting version 151
[ 1.802470] ahci 0000:00:11.0: version 3.0
[ 1.802485] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.802521] alloc irq_desc for 27 on node -1
[ 1.802523] alloc kstat_irqs on node -1
[ 1.802533] ahci 0000:00:11.0: irq 27 for MSI/MSI-X
[ 1.802609] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.802613] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.819377] scsi0 : ahci
[ 1.828908] scsi1 : ahci
[ 1.830813] scsi2 : ahci
[ 1.831046] scsi3 : ahci
[ 1.831083] ata1: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffd00 irq 27
[ 1.831087] ata2: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffd80 irq 27
[ 1.831089] ata3: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffe00 irq 27
[ 1.831092] ata4: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffe80 irq 27
[ 1.831128] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.831160] ahci 0000:03:00.0: JMB361 has only one port, port_map 0x3 -> 0x1
[ 1.834281] vga16fb: initializing
[ 1.834285] vga16fb: mapped to 0xc00a0000
[ 1.834330] fb0: VGA16 VGA frame buffer device
[ 1.835025] scsi4 : pata_atiixp
[ 1.836686] scsi5 : pata_atiixp
[ 1.837745] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.837747] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.844430] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 1.844434] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.844439] ahci 0000:03:00.0: setting latency timer to 64
[ 1.844521] scsi6 : ahci
[ 1.844594] scsi7 : ahci
[ 1.844659] ata7: SATA max UDMA/133 abar m8192@0xfe7fe000 port 0xfe7fe100 irq 18
[ 1.844661] ata8: DUMMY
[ 1.844729] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.844761] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.844816] scsi8 : pata_jmicron
[ 1.844876] scsi9 : pata_jmicron
[ 1.845302] ata9: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 1.845304] ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 2.024532] ata9.00: ATAPI: TSSTcorp CDDVDW SH-S202G, SB00, max UDMA/66
[ 2.032535] ata9.01: HPA unlocked: 586070255 -> 586072368, native 586072368
[ 2.032540] ata9.01: ATA-6: WDC WD3000JB-00KFA0, 08.05J08, max UDMA/100
[ 2.032542] ata9.01: 586072368 sectors, multi 0: LBA48
[ 2.048558] ata9.00: configured for UDMA/66
[ 2.057151] ata9.01: configured for UDMA/100
[ 2.081141] usb 1-3: configuration #1 chosen from 1 choice
[ 2.148127] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.148475] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.168453] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.248114] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 2.312119] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.313189] ata3.00: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133
[ 2.313191] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.314452] ata3.00: configured for UDMA/133
[ 2.382876] usb 2-1: configuration #1 chosen from 1 choice
[ 2.644107] usb 4-4: new low speed USB device using ohci_hcd and address 2
[ 2.823616] usb 4-4: configuration #1 chosen from 1 choice
[ 2.833033] usbcore: registered new interface driver hiddev
[ 2.840600] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/input/input3
[ 2.840658] generic-usb 0003:045E:005F.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-0000:00:12.0-4/input0
[ 2.873623] input: Microsoft Microsoft Wireless Optical Desktop® 1.00 as /devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/input/input4
[ 2.873697] generic-usb 0003:045E:005F.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 1.00] on usb-0000:00:12.0-4/input1
[ 2.873716] usbcore: registered new interface driver usbhid
[ 2.873718] usbhid: v2.6:USB HID core driver
[ 7.576157] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.576592] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 7.576595] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.577178] ata1.00: configured for UDMA/133
[ 7.592216] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 7.592360] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.592379] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 7.592433] sd 0:0:0:0: [sda] Write Protect is off
[ 7.592434] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.592466] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.592522] scsi 2:0:0:0: Direct-Access ATA WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5
[ 7.592551] sda:
[ 7.592657] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 7.592660] sd 2:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 7.592788] sda1 sda2 <
[ 7.592799] sd 2:0:0:0: [sdb] Write Protect is off
[ 7.592802] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 7.592827] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.592953] sdb: sda5 sda6 sda7 >
[ 7.593733] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.600778] sdb1 sdb2 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >
[ 7.657507] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 7.760113] scsi 8:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202G SB00 PQ: 0 ANSI: 5
[ 7.764566] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.764570] Uniform CD-ROM driver Revision: 3.20
[ 7.764658] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 7.764702] sr 8:0:0:0: Attached scsi generic sg2 type 5
[ 7.764782] scsi 8:0:1:0: Direct-Access ATA WDC WD3000JB-00K 08.0 PQ: 0 ANSI: 5
[ 7.764890] sd 8:0:1:0: [sdc] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[ 7.764916] sd 8:0:1:0: [sdc] Write Protect is off
[ 7.764918] sd 8:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 7.764931] sd 8:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.764933] sd 8:0:1:0: Attached scsi generic sg3 type 0
[ 7.765030] sdc: sdc1 sdc2
[ 7.774713] sd 8:0:1:0: [sdc] Attached SCSI disk
[ 7.933246] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 7.933299] r8169 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.933335] r8169 0000:05:00.0: setting latency timer to 64
[ 7.933340] r8169 0000:05:00.0: unknown MAC, using family default
[ 7.933380] alloc irq_desc for 28 on node -1
[ 7.933381] alloc kstat_irqs on node -1
[ 7.933393] r8169 0000:05:00.0: irq 28 for MSI/MSI-X
[ 7.934475] eth0: RTL8168b/8111b at 0xf81d8000, 48:5b:39:4d:12:24, XID 0c100000 IRQ 28
[ 7.937963] alloc irq_desc for 22 on node -1
[ 7.937966] alloc kstat_irqs on node -1
[ 7.937971] ohci1394 0000:04:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.995137] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fe8ff800-fe8fffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 8.022300] Console: switching to colour frame buffer device 80x30
[ 8.559938] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 9.272257] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000d5f136]
[ 10.497431] Adding 3905528k swap on /dev/sda6. Priority:-1 extents:1 across:3905528k SS
[ 10.508967] udev: starting version 151
[ 10.528282] lp: driver loaded but no devices found
[ 10.537878] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.537895] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 10.537898] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 10.537970] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 10.538073] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfe6fe000
[ 10.541908] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[ 10.541913] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 10.545567] usb usb8: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 10.545680] usb usb8: configuration #1 chosen from 1 choice
[ 10.545683] xHCI xhci_add_endpoint called for root hub
[ 10.545685] xHCI xhci_check_bandwidth called for root hub
[ 10.545726] hub 8-0:1.0: USB hub found
[ 10.545733] hub 8-0:1.0: 4 ports detected
[ 10.545847] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.549346] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMRG [0xb00-0xb2f]
[ 10.549348] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.640506] Linux video capture interface: v2.00
[ 10.641853] ATK0110 ATK0110:00: EC enabled
[ 10.642826] uvcvideo: Found UVC 1.00 device (046d:0821)
[ 10.659484] type=1505 audit(1307775605.476:2): operation="profile_load" pid=883 name="/sbin/dhclient3"
[ 10.659693] type=1505 audit(1307775605.476:3): operation="profile_load" pid=883 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 10.659813] type=1505 audit(1307775605.476:4): operation="profile_load" pid=883 name="/usr/lib/connman/scripts/dhclient-script"
[ 10.660984] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.666494] type=1505 audit(1307775605.484:5): operation="profile_load" pid=888 name="/usr/sbin/ntpd"
[ 10.667289] type=1505 audit(1307775605.484:6): operation="profile_replace" pid=902 name="/sbin/dhclient3"
[ 10.667506] type=1505 audit(1307775605.484:7): operation="profile_replace" pid=902 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 10.668261] type=1505 audit(1307775605.484:8): operation="profile_replace" pid=902 name="/usr/lib/connman/scripts/dhclient-script"
[ 10.672258] type=1505 audit(1307775605.488:9): operation="profile_replace" pid=906 name="/usr/sbin/ntpd"
[ 10.679316] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 10.680653] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 10.680656] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 10.680657] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 10.701211] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 10.711875] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.725848] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.821017] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 10.821043] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 10.856244] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.2/input/input5
[ 10.856315] usbcore: registered new interface driver uvcvideo
[ 10.856318] USB Video Class driver (v0.1.0)
[ 10.939464] usbcore: registered new interface driver snd-usb-audio
[ 11.018222] kjournald starting. Commit interval 5 seconds
[ 11.018575] EXT3 FS on sdc1, internal journal
[ 11.018579] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.197583] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 11.360726] Registering the dns_resolver key type
[ 11.360739] Slow work thread pool: Starting up
[ 11.361163] Slow work thread pool: Ready
[ 11.362145] CIFS VFS: Error connecting to socket. Aborting operation
[ 11.362151] CIFS VFS: cifs_mount failed w/return code = -101
[ 11.362420] CIFS VFS: Error connecting to socket. Aborting operation
[ 11.362426] CIFS VFS: cifs_mount failed w/return code = -101
[ 11.622549] kjournald starting. Commit interval 5 seconds
[ 11.622853] EXT3 FS on sdb5, internal journal
[ 11.622858] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.628387] CIFS VFS: Error connecting to socket. Aborting operation
[ 11.628393] CIFS VFS: cifs_mount failed w/return code = -101
[ 11.629180] CIFS VFS: Error connecting to socket. Aborting operation
[ 11.629185] CIFS VFS: cifs_mount failed w/return code = -101
[ 12.402744] kjournald starting. Commit interval 5 seconds
[ 12.403179] EXT3 FS on sdb6, internal journal
[ 12.403185] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.408510] CIFS VFS: Error connecting to socket. Aborting operation
[ 12.408514] CIFS VFS: cifs_mount failed w/return code = -101
[ 12.408962] CIFS VFS: Error connecting to socket. Aborting operation
[ 12.408966] CIFS VFS: cifs_mount failed w/return code = -101
[ 12.647339] kjournald starting. Commit interval 5 seconds
[ 12.647585] EXT3 FS on sdb7, internal journal
[ 12.647590] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.655012] CIFS VFS: Error connecting to socket. Aborting operation
[ 12.655017] CIFS VFS: cifs_mount failed w/return code = -101
[ 12.655466] CIFS VFS: Error connecting to socket. Aborting operation
[ 12.655471] CIFS VFS: cifs_mount failed w/return code = -101
[ 13.119783] kjournald starting. Commit interval 5 seconds
[ 13.120082] EXT3 FS on sdb8, internal journal
[ 13.120087] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.187463] kjournald starting. Commit interval 5 seconds
[ 13.187723] EXT3 FS on sdb9, internal journal
[ 13.187729] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.193043] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.193048] CIFS VFS: cifs_mount failed w/return code = -101
[ 13.193495] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.193501] CIFS VFS: cifs_mount failed w/return code = -101
[ 13.337909] kjournald starting. Commit interval 5 seconds
[ 13.338260] EXT3 FS on sdb10, internal journal
[ 13.338266] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.355064] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.355069] CIFS VFS: cifs_mount failed w/return code = -101
[ 13.360934] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.360939] CIFS VFS: cifs_mount failed w/return code = -101
[ 13.378730] type=1505 audit(1307775608.196:10): operation="profile_load" pid=1354 name="/usr/share/gdm/guest-session/Xsession"
[ 13.380286] type=1505 audit(1307775608.196:11): operation="profile_load" pid=1359 name="/usr/sbin/mysqld"
[ 13.386369] r8169: eth0: link up
[ 13.386375] r8169: eth0: link up
[ 13.490711] Linux agpgart interface v0.103
[ 13.495106] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 13.495110] Disabling lock debugging due to kernel taint
[ 13.602973] [fglrx] Maximum main memory to use for locked dma buffers: 3125 MBytes.
[ 13.603015] [fglrx] vendor: 1002 device: 9714 count: 1
[ 13.603313] [fglrx] ioport: bar 1, base 0xb000, size: 0x100
[ 13.603325] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.603329] pci 0000:01:05.0: setting latency timer to 64
[ 13.603620] [fglrx] Kernel PAT support is enabled
[ 13.603635] [fglrx] module loaded - fglrx 8.75.5 [Jun 29 2010] with 1 minors
[ 13.784637] [fglrx] GART Table is not in FRAME_BUFFER range
[ 13.784767] alloc irq_desc for 29 on node -1
[ 13.784769] alloc kstat_irqs on node -1
[ 13.784777] fglrx_pci 0000:01:05.0: irq 29 for MSI/MSI-X
[ 13.785216] [fglrx] Firegl kernel thread PID: 1796
[ 13.785524] [fglrx] IRQ 29 Enabled
[ 13.840791] vboxdrv: Found 4 processor cores.
[ 13.840879] vboxdrv: fAsync=0 offMin=0x440 offMax=0x148c
[ 13.840911] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 13.840913] vboxdrv: Successfully loaded version 3.2.12 (interface 0x00140001).
[ 14.020503] [fglrx] Gart USWC size:1024 M.
[ 14.020506] [fglrx] Gart cacheable size:405 M.
[ 14.020510] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 14.020512] [fglrx] Reserved FB block: Unshared offset:16ffb000, size:5000
[ 14.076523] ppdev: user-space parallel port driver
[ 14.204959] CPU0 attaching NULL sched-domain.
[ 14.204964] CPU1 attaching NULL sched-domain.
[ 14.204966] CPU2 attaching NULL sched-domain.
[ 14.204968] CPU3 attaching NULL sched-domain.
[ 14.244453] CPU0 attaching sched-domain:
[ 14.244457] domain 0: span 0-3 level MC
[ 14.244459] groups: 0 1 2 3
[ 14.244464] CPU1 attaching sched-domain:
[ 14.244465] domain 0: span 0-3 level MC
[ 14.244467] groups: 1 2 3 0
[ 14.244470] CPU2 attaching sched-domain:
[ 14.244472] domain 0: span 0-3 level MC
[ 14.244473] groups: 2 3 0 1
[ 14.244476] CPU3 attaching sched-domain:
[ 14.244478] domain 0: span 0-3 level MC
[ 14.244479] groups: 3 0 1 2
[ 15.048366] CPU0 attaching NULL sched-domain.
[ 15.048371] CPU1 attaching NULL sched-domain.
[ 15.048373] CPU2 attaching NULL sched-domain.
[ 15.048375] CPU3 attaching NULL sched-domain.
[ 15.080531] CPU0 attaching sched-domain:
[ 15.080535] domain 0: span 0-3 level MC
[ 15.080537] groups: 0 1 2 3
[ 15.080542] CPU1 attaching sched-domain:
[ 15.080544] domain 0: span 0-3 level MC
[ 15.080545] groups: 1 2 3 0
[ 15.080549] CPU2 attaching sched-domain:
[ 15.080550] domain 0: span 0-3 level MC
[ 15.080552] groups: 2 3 0 1
[ 15.080555] CPU3 attaching sched-domain:
[ 15.080556] domain 0: span 0-3 level MC
[ 15.080558] groups: 3 0 1 2
[ 15.798695] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 23.496060] eth0: no IPv6 routers present
[ 56.140130] CIFS VFS: Error connecting to socket. Aborting operation
[ 56.140137] CIFS VFS: cifs_mount failed w/return code = -110
[ 56.140160] CIFS VFS: Error connecting to socket. Aborting operation
[ 56.140167] CIFS VFS: cifs_mount failed w/return code = -110