dmesg - athlonII640mem10062011
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000d7fa0000 (usable)
[ 0.000000] BIOS-e820: 00000000d7fa0000 - 00000000d7fb0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d7fb0000 - 00000000d7fe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d7fe0000 - 00000000d8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./880G Extreme3, BIOS P1.70 06/21/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x128000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000D0000000 mask FFFFF8000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000128000000 aka 4736M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d8000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xd7fa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000d7fa0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00d7e00000 page 2M
[ 0.000000] 00d7e00000 - 00d7fa0000 page 4k
[ 0.000000] kernel direct mapping tables up to d7fa0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000128000000
[ 0.000000] 0100000000 - 0128000000 page 2M
[ 0.000000] kernel direct mapping tables up to 128000000 @ d7f9e000-d7fa0000
[ 0.000000] RAMDISK: 366e0000 - 37368000
[ 0.000000] ACPI: RSDP 00000000000fa940 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000d7fa0000 00044 (v01 062110 RSDT2249 20100621 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000d7fa0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000d7fa0450 07D9F (v01 AS368 AS368164 00000164 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000d7fb0000 00040
[ 0.000000] ACPI: APIC 00000000d7fa0390 0007C (v01 062110 APIC2249 20100621 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000d7fa0410 0003C (v01 062110 OEMMCFG 20100621 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000d7fb0040 00072 (v01 062110 OEMB2249 20100621 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000d7faa450 000E8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: AAFT 00000000d7faa540 00027 (v01 062110 OEMAAFT 20100621 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000d7faa570 00038 (v01 062110 OEMHPET 20100621 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000d7faa5b0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-d8000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-128000000
[ 0.000000] SRAT: Node 0 [0,a0000) + [100000,d8000000) -> [0,d8000000)
[ 0.000000] SRAT: Node 0 [0,d8000000) + [100000000,128000000) -> [0,128000000)
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000128000000
[ 0.000000] NODE_DATA [0000000127ffb000 - 0000000127ffffff]
[ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880123e00000-ffff8801277fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00128000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000d7fa0
[ 0.000000] 0: 0x00100000 -> 0x00128000
[ 0.000000] On node 0 totalpages: 1048367
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 866264 pages, LIFO batch:31
[ 0.000000] Normal zone: 2240 pages used for memmap
[ 0.000000] Normal zone: 161600 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000d7fa0000 - 00000000d7fb0000
[ 0.000000] PM: Registered nosave memory: 00000000d7fb0000 - 00000000d7fe0000
[ 0.000000] PM: Registered nosave memory: 00000000d7fe0000 - 00000000d8000000
[ 0.000000] PM: Registered nosave memory: 00000000d8000000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d8000000 (gap: d8000000:27f00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800d7c00000 s84416 r8192 d22080 u262144
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031785
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 2072000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ cc000000
[ 0.000000] PM: Registered nosave memory: 00000000cc000000 - 00000000d0000000
[ 0.000000] Memory: 3975540k/4849664k available (5940k kernel code, 656196k absent, 217928k reserved, 5017k data, 956k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:728 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 41943040 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3005.826 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6011.65 BogoMIPS (lpj=30058260)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000024] Security Framework initialized
[ 0.000035] AppArmor: AppArmor initialized
[ 0.000037] Yama: becoming mindful.
[ 0.000347] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001498] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010406] Mount-cache hash table entries: 256
[ 0.010505] Initializing cgroup subsys ns
[ 0.010507] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.010510] Initializing cgroup subsys cpuacct
[ 0.010513] Initializing cgroup subsys memory
[ 0.010520] Initializing cgroup subsys devices
[ 0.010522] Initializing cgroup subsys freezer
[ 0.010523] Initializing cgroup subsys net_cls
[ 0.010525] Initializing cgroup subsys blkio
[ 0.010549] tseg: 0000000000
[ 0.010561] CPU: Physical Processor ID: 0
[ 0.010562] CPU: Processor Core ID: 0
[ 0.010563] mce: CPU supports 6 MCE banks
[ 0.011790] ACPI: Core revision 20110112
[ 0.015500] ftrace: allocating 24314 entries in 96 pages
[ 0.020072] Setting APIC routing to flat
[ 0.020331] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.121137] CPU0: AMD Athlon(tm) II X4 640 Processor stepping 03
[ 0.130000] Performance Events: AMD PMU driver.
[ 0.130000] ... version: 0
[ 0.130000] ... bit width: 48
[ 0.130000] ... generic registers: 4
[ 0.130000] ... value mask: 0000ffffffffffff
[ 0.130000] ... max period: 00007fffffffffff
[ 0.130000] ... fixed-purpose events: 0
[ 0.130000] ... event mask: 000000000000000f
[ 0.130000] Booting Node 0, Processors #1 #2 #3
[ 0.630004] Brought up 4 CPUs
[ 0.630006] Total of 4 processors activated (24047.35 BogoMIPS).
[ 0.630326] devtmpfs: initialized
[ 0.630677] print_constraints: dummy:
[ 0.630696] Time: 16:15:24 Date: 06/09/11
[ 0.630722] NET: Registered protocol family 16
[ 0.630812] node 0 link 0: io port [1000, ffffff]
[ 0.630815] TOM: 00000000d8000000 aka 3456M
[ 0.630817] Fam 10h mmconf [e0000000, efffffff]
[ 0.630819] node 0 link 0: mmio [a0000, bffff]
[ 0.630821] node 0 link 0: mmio [d8000000, dfffffff]
[ 0.630823] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.630825] node 0 link 0: mmio [f0000000, ffefffff]
[ 0.630827] TOM2: 0000000128000000 aka 4736M
[ 0.630829] bus: [00, 07] on node 0 link 0
[ 0.630831] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.630832] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.630834] bus: 00 index 2 [mem 0xd8000000-0xdfffffff]
[ 0.630835] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.630837] bus: 00 index 4 [mem 0x128000000-0xfcffffffff]
[ 0.630844] Extended Config Space enabled on 1 nodes
[ 0.630859] ACPI: bus type pci registered
[ 0.630732] Trying to unpack rootfs image as initramfs...
[ 0.630914] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.630916] PCI: not using MMCONFIG
[ 0.630918] PCI: Using configuration type 1 for base access
[ 0.630919] PCI: Using configuration type 1 for extended access
[ 0.631377] bio: create slab at 0
[ 0.631377] ACPI: EC: Look up EC in DSDT
[ 0.631462] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.690392] ACPI: Interpreter enabled
[ 0.690396] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.690412] ACPI: Using IOAPIC for interrupt routing
[ 0.690552] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.691390] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.817037] Freeing initrd memory: 12832k freed
[ 0.940906] ACPI: No dock devices found.
[ 0.940908] HEST: Table not found.
[ 0.940911] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.940974] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.941099] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.941101] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.941103] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.941105] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.941106] pci_root PNP0A03:00: host bridge window [mem 0xd8000000-0xdfffffff]
[ 0.941108] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.941120] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.941166] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 0.941188] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.941190] pci 0000:00:02.0: PME# disabled
[ 0.941207] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
[ 0.941227] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.941229] pci 0000:00:09.0: PME# disabled
[ 0.941239] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.941260] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.941262] pci 0000:00:0a.0: PME# disabled
[ 0.941283] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.941299] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
[ 0.941306] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
[ 0.941313] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
[ 0.941320] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
[ 0.941327] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
[ 0.941334] pci 0000:00:11.0: reg 24: [mem 0xfcdffc00-0xfcdfffff]
[ 0.941349] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.941383] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.941393] pci 0000:00:12.0: reg 10: [mem 0xfcdfe000-0xfcdfefff]
[ 0.941443] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.941457] pci 0000:00:12.2: reg 10: [mem 0xfcdff800-0xfcdff8ff]
[ 0.941507] pci 0000:00:12.2: supports D1 D2
[ 0.941508] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.941511] pci 0000:00:12.2: PME# disabled
[ 0.941526] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.941536] pci 0000:00:13.0: reg 10: [mem 0xfcdfd000-0xfcdfdfff]
[ 0.941586] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.941600] pci 0000:00:13.2: reg 10: [mem 0xfcdff400-0xfcdff4ff]
[ 0.941650] pci 0000:00:13.2: supports D1 D2
[ 0.941651] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.941654] pci 0000:00:13.2: PME# disabled
[ 0.941669] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.941721] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.941730] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.941737] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.941744] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.941751] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.941758] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.941784] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.941800] pci 0000:00:14.2: reg 10: [mem 0xfcdf8000-0xfcdfbfff 64bit]
[ 0.941841] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.941844] pci 0000:00:14.2: PME# disabled
[ 0.941854] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.941908] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.941937] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.941947] pci 0000:00:14.5: reg 10: [mem 0xfcdfc000-0xfcdfcfff]
[ 0.941997] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.942036] pci 0000:00:15.0: supports D1 D2
[ 0.942057] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.942066] pci 0000:00:16.0: reg 10: [mem 0xfcdf7000-0xfcdf7fff]
[ 0.942116] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.942130] pci 0000:00:16.2: reg 10: [mem 0xfcdff000-0xfcdff0ff]
[ 0.942180] pci 0000:00:16.2: supports D1 D2
[ 0.942181] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.942184] pci 0000:00:16.2: PME# disabled
[ 0.942198] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.942210] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.942220] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.942231] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.942243] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.942285] pci 0000:04:00.0: [10de:0de1] type 0 class 0x000300
[ 0.942294] pci 0000:04:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.942303] pci 0000:04:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.942313] pci 0000:04:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit pref]
[ 0.942319] pci 0000:04:00.0: reg 24: [io 0xe800-0xe87f]
[ 0.942326] pci 0000:04:00.0: reg 30: [mem 0xfe880000-0xfe8fffff pref]
[ 0.942364] pci 0000:04:00.1: [10de:0bea] type 0 class 0x000403
[ 0.942373] pci 0000:04:00.1: reg 10: [mem 0xfe87c000-0xfe87ffff]
[ 0.960025] pci 0000:00:02.0: PCI bridge to [bus 04-04]
[ 0.960030] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.960033] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe8fffff]
[ 0.960036] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 0.960082] pci 0000:01:00.0: [1033:0194] type 0 class 0x000c03
[ 0.960097] pci 0000:01:00.0: reg 10: [mem 0xfcefe000-0xfcefffff 64bit]
[ 0.960153] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.960156] pci 0000:01:00.0: PME# disabled
[ 0.980023] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.980028] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.980031] pci 0000:00:09.0: bridge window [mem 0xfce00000-0xfcefffff]
[ 0.980034] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.980074] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.980088] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff]
[ 0.980107] pci 0000:02:00.0: reg 18: [mem 0xdffff000-0xdfffffff 64bit pref]
[ 0.980119] pci 0000:02:00.0: reg 20: [mem 0xdfff8000-0xdfffbfff 64bit pref]
[ 0.980155] pci 0000:02:00.0: supports D1 D2
[ 0.980157] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.980160] pci 0000:02:00.0: PME# disabled
[ 1.000024] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 1.000028] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 1.000031] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.000034] pci 0000:00:0a.0: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[ 1.000104] pci 0000:05:06.0: [168c:001d] type 0 class 0x000200
[ 1.000123] pci 0000:05:06.0: reg 10: [mem 0xfe9f0000-0xfe9fffff]
[ 1.000230] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
[ 1.000234] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 1.000237] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.000240] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.000243] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.000244] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.000246] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.000248] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.000250] pci 0000:00:14.4: bridge window [mem 0xd8000000-0xdfffffff] (subtractive decode)
[ 1.000252] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 1.000301] pci 0000:03:00.0: [1106:3403] type 0 class 0x000c00
[ 1.000322] pci 0000:03:00.0: reg 10: [mem 0xfcfff800-0xfcffffff 64bit]
[ 1.000333] pci 0000:03:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.000401] pci 0000:03:00.0: supports D2
[ 1.000402] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
[ 1.000406] pci 0000:03:00.0: PME# disabled
[ 1.020064] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 1.020075] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 1.020078] pci 0000:00:15.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 1.020082] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.020106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.020222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 1.020246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 1.020265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 1.020298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 1.020348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 1.020369] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.023262] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11 14 15) *0
[ 1.023307] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *0
[ 1.023350] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11 14 15) *0
[ 1.023392] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11 14 15) *0
[ 1.023425] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11 14 15) *0
[ 1.023450] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0
[ 1.023474] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0
[ 1.023499] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11 14 15) *0
[ 1.023575] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.023579] vgaarb: loaded
[ 1.023694] SCSI subsystem initialized
[ 1.023716] libata version 3.00 loaded.
[ 1.023716] usbcore: registered new interface driver usbfs
[ 1.023716] usbcore: registered new interface driver hub
[ 1.023716] usbcore: registered new device driver usb
[ 1.023716] wmi: Mapper loaded
[ 1.023716] PCI: Using ACPI for IRQ routing
[ 1.023716] PCI: pci_cache_line_size set to 64 bytes
[ 1.023716] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 1.023716] reserve RAM buffer: 00000000d7fa0000 - 00000000d7ffffff
[ 1.023716] NetLabel: Initializing
[ 1.023716] NetLabel: domain hash size = 128
[ 1.023716] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.023716] NetLabel: unlabeled traffic allowed by default
[ 1.023716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.023716] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.023716] Switching to clocksource hpet
[ 1.023716] Switched to NOHz mode on CPU #0
[ 1.023716] Switched to NOHz mode on CPU #2
[ 1.023716] Switched to NOHz mode on CPU #1
[ 1.023724] Switched to NOHz mode on CPU #3
[ 1.024563] AppArmor: AppArmor Filesystem Enabled
[ 1.024587] pnp: PnP ACPI init
[ 1.024600] ACPI: bus type pnp registered
[ 1.024691] pnp 00:00: [bus 00-ff]
[ 1.024693] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.024695] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.024697] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.024698] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.024700] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 1.024702] pnp 00:00: [mem 0xd8000000-0xdfffffff window]
[ 1.024703] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 1.024749] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.024813] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 1.024815] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 1.024856] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.024884] pnp 00:02: [dma 4]
[ 1.024886] pnp 00:02: [io 0x0000-0x000f]
[ 1.024887] pnp 00:02: [io 0x0081-0x0083]
[ 1.024889] pnp 00:02: [io 0x0087]
[ 1.024890] pnp 00:02: [io 0x0089-0x008b]
[ 1.024891] pnp 00:02: [io 0x008f]
[ 1.024893] pnp 00:02: [io 0x00c0-0x00df]
[ 1.024910] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.024916] pnp 00:03: [io 0x0070-0x0071]
[ 1.024925] pnp 00:03: [irq 8]
[ 1.024944] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.024949] pnp 00:04: [io 0x0061]
[ 1.024966] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.024971] pnp 00:05: [io 0x00f0-0x00ff]
[ 1.025001] pnp 00:05: [irq 13]
[ 1.025020] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.025243] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 1.025262] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.025311] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 1.025313] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 1.025347] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.025350] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.025352] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.025440] pnp 00:08: [io 0x0010-0x001f]
[ 1.025441] pnp 00:08: [io 0x0022-0x003f]
[ 1.025442] pnp 00:08: [io 0x0062-0x0063]
[ 1.025444] pnp 00:08: [io 0x0065-0x006f]
[ 1.025445] pnp 00:08: [io 0x0072-0x007f]
[ 1.025446] pnp 00:08: [io 0x0080]
[ 1.025448] pnp 00:08: [io 0x0084-0x0086]
[ 1.025449] pnp 00:08: [io 0x0088]
[ 1.025450] pnp 00:08: [io 0x008c-0x008e]
[ 1.025452] pnp 00:08: [io 0x0090-0x009f]
[ 1.025453] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.025454] pnp 00:08: [io 0x00b1]
[ 1.025456] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.025457] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.025458] pnp 00:08: [io 0x040b]
[ 1.025460] pnp 00:08: [io 0x04d6]
[ 1.025461] pnp 00:08: [io 0x0c00-0x0c01]
[ 1.025462] pnp 00:08: [io 0x0c14]
[ 1.025463] pnp 00:08: [io 0x0c50-0x0c51]
[ 1.025465] pnp 00:08: [io 0x0c52]
[ 1.025466] pnp 00:08: [io 0x0c6c]
[ 1.025467] pnp 00:08: [io 0x0c6f]
[ 1.025468] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 1.025470] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 1.025471] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 1.025472] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 1.025474] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 1.025475] pnp 00:08: [io 0x0800-0x089f]
[ 1.025477] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 1.025478] pnp 00:08: [io 0x0b00-0x0b1f]
[ 1.025480] pnp 00:08: [io 0x0b20-0x0b3f]
[ 1.025481] pnp 00:08: [io 0x0900-0x090f]
[ 1.025482] pnp 00:08: [io 0x0910-0x091f]
[ 1.025484] pnp 00:08: [io 0xfe00-0xfefe]
[ 1.025485] pnp 00:08: [io 0x0060-0x005f disabled]
[ 1.025487] pnp 00:08: [io 0x0064-0x0063 disabled]
[ 1.025488] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 1.025490] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 1.025491] pnp 00:08: [mem 0xfed80000-0xfed80fff]
[ 1.025494] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
[ 1.025562] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.025564] system 00:08: [io 0x040b] has been reserved
[ 1.025566] system 00:08: [io 0x04d6] has been reserved
[ 1.025568] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 1.025569] system 00:08: [io 0x0c14] has been reserved
[ 1.025571] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 1.025573] system 00:08: [io 0x0c52] has been reserved
[ 1.025575] system 00:08: [io 0x0c6c] has been reserved
[ 1.025577] system 00:08: [io 0x0c6f] has been reserved
[ 1.025578] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 1.025580] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 1.025582] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 1.025584] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 1.025586] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 1.025588] system 00:08: [io 0x0800-0x089f] has been reserved
[ 1.025590] system 00:08: [io 0x0b00-0x0b1f] has been reserved
[ 1.025592] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 1.025594] system 00:08: [io 0x0900-0x090f] has been reserved
[ 1.025596] system 00:08: [io 0x0910-0x091f] has been reserved
[ 1.025598] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 1.025600] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 1.025602] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 1.025604] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
[ 1.025607] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.025624] pnp 00:09: [io 0x0060]
[ 1.025625] pnp 00:09: [io 0x0064]
[ 1.025662] pnp 00:09: [irq 1]
[ 1.025683] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.025907] pnp 00:0a: [io 0x03f8-0x03ff]
[ 1.025911] pnp 00:0a: [irq 4]
[ 1.025912] pnp 00:0a: [dma 0 disabled]
[ 1.025953] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.025991] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 1.025993] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 1.025995] pnp 00:0b: [io 0x0290-0x029f]
[ 1.026031] system 00:0b: [io 0x0290-0x029f] has been reserved
[ 1.026033] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.026054] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 1.026090] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.026092] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.026740] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 1.026743] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 1.026744] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 1.026746] pnp 00:0d: [mem 0x00100000-0xd7ffffff]
[ 1.026748] pnp 00:0d: [mem 0xfec00000-0xffffffff]
[ 1.026825] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.026827] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.026829] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.026831] system 00:0d: [mem 0x00100000-0xd7ffffff] could not be reserved
[ 1.026833] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 1.026837] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.026919] pnp: PnP ACPI: found 14 devices
[ 1.026920] ACPI: ACPI bus type pnp unregistered
[ 1.032799] pci 0000:00:02.0: PCI bridge to [bus 04-04]
[ 1.032802] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.032805] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe8fffff]
[ 1.032808] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 1.032811] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 1.032812] pci 0000:00:09.0: bridge window [io disabled]
[ 1.032814] pci 0000:00:09.0: bridge window [mem 0xfce00000-0xfcefffff]
[ 1.032816] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 1.032819] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[ 1.032821] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 1.032823] pci 0000:00:0a.0: bridge window [mem disabled]
[ 1.032825] pci 0000:00:0a.0: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[ 1.032828] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[ 1.032829] pci 0000:00:14.4: bridge window [io disabled]
[ 1.032833] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
[ 1.032836] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 1.032841] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 1.032843] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
[ 1.032846] pci 0000:00:15.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 1.032849] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 1.032865] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.032868] pci 0000:00:02.0: setting latency timer to 64
[ 1.032874] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.032877] pci 0000:00:09.0: setting latency timer to 64
[ 1.032880] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.032882] pci 0000:00:0a.0: setting latency timer to 64
[ 1.032892] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.032894] pci 0000:00:15.0: setting latency timer to 64
[ 1.032897] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.032899] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.032901] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.032902] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.032904] pci_bus 0000:00: resource 8 [mem 0xd8000000-0xdfffffff]
[ 1.032905] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.032907] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 1.032909] pci_bus 0000:04: resource 1 [mem 0xfd000000-0xfe8fffff]
[ 1.032911] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xfbffffff 64bit pref]
[ 1.032912] pci_bus 0000:01: resource 1 [mem 0xfce00000-0xfcefffff]
[ 1.032914] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.032916] pci_bus 0000:02: resource 2 [mem 0xdff00000-0xdfffffff 64bit pref]
[ 1.032918] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 1.032919] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 1.032921] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 1.032922] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.032924] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.032925] pci_bus 0000:05: resource 8 [mem 0xd8000000-0xdfffffff]
[ 1.032927] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.032929] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 1.032930] pci_bus 0000:03: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 1.032960] NET: Registered protocol family 2
[ 1.033072] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.033948] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.036145] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.036410] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.036412] TCP reno registered
[ 1.036422] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.036447] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.036545] NET: Registered protocol family 1
[ 1.190147] pci 0000:04:00.0: Boot video device
[ 1.190186] PCI: CLS 64 bytes, default 64
[ 1.194122] PCI-DMA: Disabling AGP.
[ 1.194222] PCI-DMA: aperture base @ cc000000 size 65536 KB
[ 1.194223] PCI-DMA: using GART IOMMU.
[ 1.194226] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.197049] audit: initializing netlink socket (disabled)
[ 1.197065] type=2000 audit(1307636124.190:1): initialized
[ 1.206800] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.208215] VFS: Disk quotas dquot_6.5.2
[ 1.208278] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.208840] fuse init (API version 7.16)
[ 1.208913] msgmni has been set to 7918
[ 1.209235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.209348] io scheduler noop registered
[ 1.209352] io scheduler deadline registered
[ 1.209403] io scheduler cfq registered (default)
[ 1.209625] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.209655] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.209851] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.209880] pcieport 0000:00:09.0: irq 41 for MSI/MSI-X
[ 1.210058] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.210084] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 1.210351] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.210370] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.210476] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.210480] ACPI: Power Button [PWRB]
[ 1.210511] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.210513] ACPI: Power Button [PWRF]
[ 1.210645] ACPI: acpi_idle registered with cpuidle
[ 1.470338] ERST: Table is not found!
[ 1.490996] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.670758] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.671109] Linux agpgart interface v0.103
[ 1.671830] brd: module loaded
[ 1.672158] loop: module loaded
[ 1.672234] i2c-core: driver [adp5520] using legacy suspend method
[ 1.672236] i2c-core: driver [adp5520] using legacy resume method
[ 1.672498] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.672525] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.672920] Fixed MDIO Bus: probed
[ 1.672940] PPP generic driver version 2.4.2
[ 1.672979] tun: Universal TUN/TAP device driver, 1.6
[ 1.672981] tun: (C) 1999-2004 Max Krasnyansky
[ 1.673037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.673193] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.673232] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.673302] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.750094] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.750098] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.750121] ehci_hcd 0000:00:12.2: debug port 1
[ 1.750145] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfcdff800
[ 1.770075] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.770198] hub 1-0:1.0: USB hub found
[ 1.770202] hub 1-0:1.0: 5 ports detected
[ 1.770441] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.770464] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.770534] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.770612] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.770615] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.770632] ehci_hcd 0000:00:13.2: debug port 1
[ 1.770643] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfcdff400
[ 1.790075] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.790186] hub 2-0:1.0: USB hub found
[ 1.790189] hub 2-0:1.0: 5 ports detected
[ 1.790463] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.790485] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.790550] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.790628] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 1.790631] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.790648] ehci_hcd 0000:00:16.2: debug port 1
[ 1.790660] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfcdff000
[ 1.810075] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.810196] hub 3-0:1.0: USB hub found
[ 1.810200] hub 3-0:1.0: 4 ports detected
[ 1.810331] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.810494] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.810522] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.810588] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.810680] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfcdfe000
[ 1.874210] hub 4-0:1.0: USB hub found
[ 1.874249] hub 4-0:1.0: 5 ports detected
[ 1.874462] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.874484] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.874549] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.874633] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfcdfd000
[ 1.934195] hub 5-0:1.0: USB hub found
[ 1.934235] hub 5-0:1.0: 5 ports detected
[ 1.934460] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.934482] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.934553] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.934637] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfcdfc000
[ 1.994190] hub 6-0:1.0: USB hub found
[ 1.994229] hub 6-0:1.0: 2 ports detected
[ 1.994442] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.994465] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.994532] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.994617] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfcdf7000
[ 2.054191] hub 7-0:1.0: USB hub found
[ 2.054230] hub 7-0:1.0: 4 ports detected
[ 2.054333] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.150116] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.150118] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.150667] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.150753] mousedev: PS/2 mouse device common for all mice
[ 2.150866] rtc_cmos 00:03: RTC can wake from S4
[ 2.171051] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.190077] Refined TSC clocksource calibration: 3005.920 MHz.
[ 2.190081] Switching to clocksource tsc
[ 2.220117] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.220140] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.220222] device-mapper: uevent: version 1.0.3
[ 2.220279] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
[ 2.220391] device-mapper: multipath: version 1.2.0 loaded
[ 2.220399] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.220567] cpuidle: using governor ladder
[ 2.220570] cpuidle: using governor menu
[ 2.220756] TCP cubic registered
[ 2.220839] NET: Registered protocol family 10
[ 2.221185] NET: Registered protocol family 17
[ 2.221199] Registering the dns_resolver key type
[ 2.221246] powernow-k8: Found 1 AMD Athlon(tm) II X4 640 Processor (4 cpu cores) (version 2.20.00)
[ 2.221276] powernow-k8: 0 : pstate 0 (3000 MHz)
[ 2.221278] powernow-k8: 1 : pstate 1 (2300 MHz)
[ 2.221279] powernow-k8: 2 : pstate 2 (1800 MHz)
[ 2.221280] powernow-k8: 3 : pstate 3 (800 MHz)
[ 2.221674] PM: Hibernation image not present or could not be loaded.
[ 2.221683] registered taskstats version 1
[ 2.221982] Magic number: 15:92:287
[ 2.222008] tty tty20: hash matches
[ 2.222105] rtc_cmos 00:03: setting system clock to 2011-06-09 16:15:26 UTC (1307636126)
[ 2.222107] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.222109] EDD information not available.
[ 2.223359] Freeing unused kernel memory: 956k freed
[ 2.223572] Write protecting the kernel read-only data: 10240k
[ 2.224177] Freeing unused kernel memory: 184k freed
[ 2.227898] Freeing unused kernel memory: 1444k freed
[ 2.246722] udev[112]: starting version 167
[ 2.290746] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.290766] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.290814] r8169 0000:02:00.0: setting latency timer to 64
[ 2.290819] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
[ 2.290860] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 2.291215] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000066e000, 00:25:22:8e:c5:6c, XID 0c200000 IRQ 43
[ 2.295519] ahci 0000:00:11.0: version 3.0
[ 2.295582] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.295636] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
[ 2.295712] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.295715] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.296556] scsi0 : ahci
[ 2.296705] firewire_ohci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.296711] firewire_ohci 0000:03:00.0: setting latency timer to 64
[ 2.296755] scsi1 : ahci
[ 2.296851] scsi2 : ahci
[ 2.296934] scsi3 : ahci
[ 2.297050] ata1: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffd00 irq 44
[ 2.297053] ata2: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffd80 irq 44
[ 2.297055] ata3: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffe00 irq 44
[ 2.297058] ata4: SATA max UDMA/133 abar m1024@0xfcdffc00 port 0xfcdffe80 irq 44
[ 2.298761] scsi4 : pata_atiixp
[ 2.298899] scsi5 : pata_atiixp
[ 2.299022] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.299024] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.370147] firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 2.420058] usb 4-4: new full speed USB device using ohci_hcd and address 2
[ 2.640092] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.640121] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.840079] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.845781] ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 2.845784] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.850068] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.851521] ata2.00: configured for UDMA/133
[ 2.851644] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
[ 2.851647] ata4.00: applying bridge limits
[ 2.851697] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 2.851864] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.851940] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.852096] sd 1:0:0:0: [sda] Write Protect is off
[ 2.852098] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.852122] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.870129] firewire_core: created device fw0: GUID 008f130079dd0b00, S400
[ 2.883747] sda: sda1 sda2 < sda5 sda6 >
[ 2.884222] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.990045] usb 7-3: new low speed USB device using ohci_hcd and address 2
[ 3.652490] ata4.00: configured for PIO4
[ 4.454399] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB05 PQ: 0 ANSI: 5
[ 4.458555] sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.458558] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.458674] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.458740] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.467281] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:16.0/usb7/7-3/7-3:1.0/input/input3
[ 4.467372] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:16.0-3/input0
[ 4.467388] usbcore: registered new interface driver usbhid
[ 4.467389] usbhid: USB HID core driver
[ 4.818051] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.215772] udev[362]: starting version 167
[ 9.235623] lp: driver loaded but no devices found
[ 9.280128] xhci_hcd 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.280160] xhci_hcd 0000:01:00.0: setting latency timer to 64
[ 9.280164] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 9.280257] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 8
[ 9.283813] Adding 9763836k swap on /dev/sda6. Priority:-1 extents:1 across:9763836k
[ 9.334690] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 9.334694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.336878] type=1400 audit(1307636133.603:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=506 comm="apparmor_parser"
[ 9.337142] type=1400 audit(1307636133.603:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=506 comm="apparmor_parser"
[ 9.337313] type=1400 audit(1307636133.603:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=506 comm="apparmor_parser"
[ 9.339359] type=1400 audit(1307636133.603:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=590 comm="apparmor_parser"
[ 9.340197] xhci_hcd 0000:01:00.0: irq 17, io mem 0xfcefe000
[ 9.340280] xhci_hcd 0000:01:00.0: irq 45 for MSI/MSI-X
[ 9.340284] xhci_hcd 0000:01:00.0: irq 46 for MSI/MSI-X
[ 9.340288] xhci_hcd 0000:01:00.0: irq 47 for MSI/MSI-X
[ 9.340292] xhci_hcd 0000:01:00.0: irq 48 for MSI/MSI-X
[ 9.340296] xhci_hcd 0000:01:00.0: irq 49 for MSI/MSI-X
[ 9.343543] usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
[ 9.346605] nvidia: module license 'NVIDIA' taints kernel.
[ 9.346609] Disabling lock debugging due to kernel taint
[ 9.348077] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 9.348626] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 9.353737] MCE: In-kernel MCE decoding enabled.
[ 9.353790] xHCI xhci_add_endpoint called for root hub
[ 9.353794] xHCI xhci_check_bandwidth called for root hub
[ 9.353841] hub 8-0:1.0: USB hub found
[ 9.353845] hub 8-0:1.0: 4 ports detected
[ 9.362556] EDAC MC: Ver: 2.1.0 Apr 11 2011
[ 9.368690] cfg80211: Calling CRDA to update world regulatory domain
[ 9.373271] EDAC amd64_edac: v3.3.0
[ 9.382036] Linux video capture interface: v2.00
[ 9.383904] gspca: v2.12.0 registered
[ 9.385802] gspca: probing 046d:08ad
[ 9.388631] EDAC amd64: DRAM ECC disabled.
[ 9.388643] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 9.388644] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 9.388645] (Note that use of the override may cause unknown side effects.)
[ 9.420872] ath5k 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 9.420941] ath5k 0000:05:06.0: registered as 'phy0'
[ 9.503177] cfg80211: World regulatory domain updated:
[ 9.503180] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.503183] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.503185] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.503187] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.503188] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.503190] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.878406] nvidia 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.878413] nvidia 0000:04:00.0: setting latency timer to 64
[ 9.878421] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.879542] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.06 Mon Apr 18 14:53:56 PDT 2011
[ 9.917899] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.919947] ath: EEPROM regdomain: 0x809c
[ 9.919948] ath: EEPROM indicates we should expect a country code
[ 9.919949] ath: doing EEPROM country->regdmn map search
[ 9.919951] ath: country maps to regdmn code: 0x52
[ 9.919952] ath: Country alpha2 being used: CN
[ 9.919953] ath: Regpair used: 0x52
[ 9.919956] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 9.919958] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.919959] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 9.919961] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.919962] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 9.919964] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.919965] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 9.919967] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.919969] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 9.919970] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.919972] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 9.919974] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.919975] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 9.919977] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.919978] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 9.919980] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.920057] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920059] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.920060] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920062] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.920063] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920065] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.920067] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 9.920068] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 9.920070] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 9.920120] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920122] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920124] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920126] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920127] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920129] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920131] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920133] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920135] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920137] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920138] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920140] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920142] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920144] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920145] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920147] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920149] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920151] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920153] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920155] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920156] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920158] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920160] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920162] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920164] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920166] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.920167] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 9.920169] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9.925260] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.925691] ath5k phy0: Atheros AR2417 chip found (MAC: 0xf0, PHY: 0x70)
[ 9.925720] cfg80211: Calling CRDA for country: CN
[ 9.928893] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928897] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928899] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928901] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928902] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928904] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928906] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928907] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928909] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928910] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928912] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928914] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928915] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928917] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928918] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928920] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928921] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928923] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928924] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928926] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928927] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928929] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928931] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928932] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928934] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 9.928936] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 9.928937] cfg80211: Disabling freq 2484 MHz
[ 9.928940] cfg80211: Regulatory domain changed to country: CN
[ 9.928941] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.928943] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9.928944] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 10.022982] hda-codec: no NID for mapping control Independent HP:0:0
[ 10.024692] HDA Intel 0000:04:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 10.024695] hda_intel: Disable MSI for Nvidia chipset
[ 10.024765] HDA Intel 0000:04:00.1: setting latency timer to 64
[ 10.065501] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.232816] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 10.478184] r8169 0000:02:00.0: eth0: link down
[ 10.478202] r8169 0000:02:00.0: eth0: link down
[ 10.478536] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.485057] type=1400 audit(1307636134.753:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=834 comm="apparmor_parser"
[ 10.487010] type=1400 audit(1307636134.753:7): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=839 comm="apparmor_parser"
[ 10.487022] type=1400 audit(1307636134.753:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=835 comm="apparmor_parser"
[ 10.487303] type=1400 audit(1307636134.753:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=835 comm="apparmor_parser"
[ 10.487476] type=1400 audit(1307636134.753:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=835 comm="apparmor_parser"
[ 10.488883] type=1400 audit(1307636134.753:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=840 comm="apparmor_parser"
[ 10.489786] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.725161] zc3xx: probe 2wr ov vga 0x0000
[ 10.775150] zc3xx: probe sensor -> 0011
[ 10.775153] zc3xx: Find Sensor HV7131R
[ 10.779207] input: zc3xx as /devices/pci0000:00/0000:00:12.0/usb4/4-4/input/input4
[ 10.779299] gspca: video0 created
[ 10.779339] usbcore: registered new interface driver zc3xx
[ 10.822363] usbcore: registered new interface driver snd-usb-audio
[ 11.980695] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 11.985453] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 12.165811] r8169 0000:02:00.0: eth0: link up
[ 12.166159] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.500047] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 16.500052] ata4.00: failed command: IDENTIFY PACKET DEVICE
[ 16.500057] ata4.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 16.500058] res 50/00:03:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 16.500060] ata4.00: status: { DRDY }
[ 16.500063] ata4: hard resetting link
[ 17.050086] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 17.852826] ata4.00: configured for PIO4
[ 18.670096] ata4: EH complete
[ 22.300019] eth0: no IPv6 routers present
[ 50.000037] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 50.000042] ata4.00: failed command: IDENTIFY PACKET DEVICE
[ 50.000046] ata4.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
[ 50.000047] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 50.000049] ata4.00: status: { DRDY }
[ 50.000053] ata4: hard resetting link
[ 50.550070] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 51.352943] ata4.00: configured for PIO4
[ 52.170078] ata4: EH complete
[ 52.190039] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90014180000, using 5120k, total 5120k
[ 52.190043] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 52.190045] vesafb: scrolling: redraw
[ 52.190047] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 52.190220] Console: switching to colour frame buffer device 160x64
[ 52.190242] fb0: VESA VGA frame buffer device
[ 52.211939] ppdev: user-space parallel port driver
[ 52.221535] audit_printk_skb: 15 callbacks suppressed
[ 52.221538] type=1400 audit(1307636175.711:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1355 comm="apparmor_parser"
[ 52.221875] type=1400 audit(1307636175.711:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1355 comm="apparmor_parser"
[ 52.355989] ioremap error for 0xd7fa0000-0xd7fa1000, requested 0x10, got 0x0
[ 56.257225] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 56.259428] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 57.360834] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 1726.460095] usb 3-4: new high speed USB device using ehci_hcd and address 3
[ 1726.647646] usbcore: registered new interface driver uas
[ 1726.675326] Initializing USB Mass Storage driver...
[ 1726.675811] scsi6 : usb-storage 3-4:1.0
[ 1726.676201] usbcore: registered new interface driver usb-storage
[ 1726.676209] USB Mass Storage support registered.
[ 1727.698440] scsi 6:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 1727.700509] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 1729.029307] sd 6:0:0:0: [sdb] 7823360 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 1729.029929] sd 6:0:0:0: [sdb] Write Protect is off
[ 1729.029940] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1729.030926] sd 6:0:0:0: [sdb] No Caching mode page present
[ 1729.030936] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1729.036426] sd 6:0:0:0: [sdb] No Caching mode page present
[ 1729.036437] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1729.056830] sdb: sdb1
[ 1729.060686] sd 6:0:0:0: [sdb] No Caching mode page present
[ 1729.060697] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1729.060706] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 8916.192775] exe (12361): /proc/12361/oom_adj is deprecated, please use /proc/12361/oom_score_adj instead.
[22663.884557] indicator-weath[1636] general protection ip:7fb6aa72588d sp:7fff85005760 error:0 in libc-2.13.so[7fb6aa6a9000+18a000]