Xorg.0.log - kvm-disk-tests
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-trunk-amd64 x86_64 Debian
Current Operating System: Linux node139 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64
Build Date: 18 February 2011 08:27:24PM
xorg-server 2:1.7.7-13 (Cyril Brulebois )
Current version of pixman: 0.16.4
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 26 01:31:08 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor ""
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c8aa0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 1013:00b8:1af4:1100 Cirrus Logic GD 5446 rev 0, Mem @ 0xf0000000/33554432, 0xf2000000/4096, BIOS @ 0x????????/65536
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched cirrus as autoconfigured driver 0
(==) Matched vesa as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "cirrus"
(II) Loading /usr/lib/xorg/modules/drivers/cirrus_drv.so
(II) Module cirrus: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 0.4.2
ABI class: X.Org Video Driver, version 6.0
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for cirrus
(--) Assigning device section with no busID to primary device
(--) Chipset CLGD5446 found
(II) Loading sub module "cirrus_alpine"
(II) LoadModule: "cirrus_alpine"
(II) Loading /usr/lib/xorg/modules/drivers/cirrus_alpine.so
(II) Module cirrus_alpine: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(EE) open /dev/fb0: No such file or directory
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) CIRRUS(0): initializing int10
(II) CIRRUS(0): Primary V_BIOS segment is: 0xc000
(II) CIRRUS(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/24
(--) CIRRUS(0): Depth 24, (==) framebuffer bpp 24
(==) CIRRUS(0): RGB weight 888
(==) CIRRUS(0): Default visual is TrueColor
(==) CIRRUS(0): Using SW cursor
(--) CIRRUS(0): Linear framebuffer at 0xF0000000
(--) CIRRUS(0): Using MMIO
(--) CIRRUS(0): MMIO registers at 0xF2000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) CIRRUS(0): I2C bus "I2C bus 1" initialized.
(II) CIRRUS(0): I2C bus "I2C bus 2" initialized.
(II) CIRRUS(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) CIRRUS(0): Defaulting to 1024x768 for QEMU
(==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0)
(--) CIRRUS(0): Memory Config reg 1 is 0x98
(--) CIRRUS(0): Memory Config reg 2 is 0x20
(--) CIRRUS(0): VideoRAM: 4096 kByte
(==) CIRRUS(0): Min pixel clock is 12 MHz
(--) CIRRUS(0): Max pixel clock is 85 MHz
(II) CIRRUS(0): : Using hsync range of 31.50-48.00 kHz
(II) CIRRUS(0): : Using vrefresh range of 56.00-60.10 Hz
(II) CIRRUS(0): : Using maximum pixel clock of 65.00 MHz
(WW) CIRRUS(0): Unable to estimate virtual size
(II) CIRRUS(0): Clock range: 12.00 to 85.50 MHz
(II) CIRRUS(0): Not using default mode "640x350" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x400" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "720x400" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x480" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x480" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x480" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "800x600" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "800x600" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "800x600" (hsync out of range)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (hsync out of range)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (hsync out of range)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "832x624" (hsync out of range)
(II) CIRRUS(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (hsync out of range)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1360x768" (width requires unsupported line pitch)
(II) CIRRUS(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1360x768" (width requires unsupported line pitch)
(II) CIRRUS(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1440x900" (width requires unsupported line pitch)
(II) CIRRUS(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1680x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1080" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) CIRRUS(0): Virtual size is 1024x768 (pitch 1024)
(**) CIRRUS(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) CIRRUS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) CIRRUS(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) CIRRUS(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) CIRRUS(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) CIRRUS(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) CIRRUS(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(==) CIRRUS(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(--) Depth 24 pixmap format is 24 bpp
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) CIRRUS(0): Using 597 lines for offscreen memory
(II) CIRRUS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
(==) CIRRUS(0): Silken mouse enabled
(==) CIRRUS(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device QEMU 0.14.0 QEMU USB Tablet (/dev/input/event4)
(**) QEMU 0.14.0 QEMU USB Tablet: Applying InputClass "evdev pointer catchall"
(**) QEMU 0.14.0 QEMU USB Tablet: always reports core events
(**) QEMU 0.14.0 QEMU USB Tablet: Device: "/dev/input/event4"
(II) QEMU 0.14.0 QEMU USB Tablet: Found 3 mouse buttons
(II) QEMU 0.14.0 QEMU USB Tablet: Found scroll wheel(s)
(II) QEMU 0.14.0 QEMU USB Tablet: Found relative axes
(II) QEMU 0.14.0 QEMU USB Tablet: Found absolute axes
(II) QEMU 0.14.0 QEMU USB Tablet: Found x and y absolute axes
(II) QEMU 0.14.0 QEMU USB Tablet: Configuring as mouse
(**) QEMU 0.14.0 QEMU USB Tablet: YAxisMapping: buttons 4 and 5
(**) QEMU 0.14.0 QEMU USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "QEMU 0.14.0 QEMU USB Tablet" (type: MOUSE)
(EE) QEMU 0.14.0 QEMU USB Tablet: failed to initialize for relative axes.
(II) QEMU 0.14.0 QEMU USB Tablet: initialized for absolute axes.
(II) config/udev: Adding input device QEMU 0.14.0 QEMU USB Tablet (/dev/input/js0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device QEMU 0.14.0 QEMU USB Tablet (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event5)
(**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event5"
(II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
(II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Generic Explorer Mouse: Found relative axes
(II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
(II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
(II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)