dmesg - raid1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686-bigmem (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Mar 8 22:14:55 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6ba000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf6ba000 - 00000000bf6bb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6bb000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000440000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x440000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 1 base 0000000000 mask FC00000000 write-back
[ 0.000000] 2 base 0400000000 mask FFC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037600000 page 2M
[ 0.000000] 0037600000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-17000
[ 0.000000] RAMDISK: 37765000 - 37fef122
[ 0.000000] Allocated new RAMDISK: 00100000 - 0098a122
[ 0.000000] Move RAMDISK from 0000000037765000 - 0000000037fef121 to 00100000 - 0098a121
[ 0.000000] ACPI: RSDP 000f7f60 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT bf6b291b 0011C (v01 PTLTD ? XSDT 00060000 LTP 00000000)
[ 0.000000] ACPI: FACP bf6b84a3 000F4 (v03 FSC TYLERBRG 00060000 PTL 000F4240)
[ 0.000000] ACPI: DSDT bf6b2a37 059E8 (v01 FSC D2709 00060000 MSFT 03000001)
[ 0.000000] ACPI: FACS bf6bafc0 00040
[ 0.000000] ACPI: TCPA bf6b8597 00032 (v01 Phoeni x 00060000 TL 00000000)
[ 0.000000] ACPI: SLIT bf6b85c9 00030 (v01 FSC 00060000 0000005A)
[ 0.000000] ACPI: SRAT bf6b85f9 00128 (v01 Intel Tylerbrg 00060000 PHX. 00000001)
[ 0.000000] ACPI: SSDT bf6b8721 0009E (v01 FSC CST_PR00 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b87bf 0009E (v01 FSC CST_PR02 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b885d 0009E (v01 FSC CST_PR04 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b88fb 0009E (v01 FSC CST_PR06 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b8999 0009E (v01 FSC CST_PR10 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b8a37 0009E (v01 FSC CST_PR12 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b8ad5 0009E (v01 FSC CST_PR14 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b8b73 0009E (v01 FSC CST_PR16 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b8c11 00119 (v01 FSC PST_PR00 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b8d2a 00119 (v01 FSC PST_PR02 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b8e43 00119 (v01 FSC PST_PR04 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b8f5c 00119 (v01 FSC PST_PR06 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b9075 00119 (v01 FSC PST_PR10 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b918e 00119 (v01 FSC PST_PR12 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b92a7 00119 (v01 FSC PST_PR14 00060000 CSF 00000001)
[ 0.000000] ACPI: SSDT bf6b93c0 00119 (v01 FSC PST_PR16 00060000 CSF 00000001)
[ 0.000000] ACPI: EINJ bf6b94d9 001B0 (v01 PTL WHEAPTL 00060000 PTL 00000001)
[ 0.000000] ACPI: HEST bf6b9689 00268 (v01 PTL WHEAPTL 00060000 PTL 00000001)
[ 0.000000] ACPI: BERT bf6b98f1 00030 (v01 PTL WHEAPTL 00060000 PTL 00000001)
[ 0.000000] ACPI: SSDT bf6b9921 000EB (v01 wheaos wheaosc 00060000 MSFT 03000001)
[ 0.000000] ACPI: ERST bf6b9a0c 00270 (v01 PTL WHEAPTL 00060000 PTL 00000001)
[ 0.000000] ACPI: SPCR bf6b9c7c 00050 (v01 PTLTD $UCRTBL$ 00060000 PTL 00000001)
[ 0.000000] ACPI: DMAR bf6b9ccc 001D0 (v01 Intel OEMDMAR 00060000 LOHR 00000001)
[ 0.000000] ACPI: MCFG bf6b9e9c 0003C (v01 PTLTD MCFG 00060000 LTP 00000000)
[ 0.000000] ACPI: HPET bf6b9ed8 00038 (v01 PTLTD HPETTBL 00060000 LTP 00000001)
[ 0.000000] ACPI: APIC bf6b9f10 000C8 (v01 PTLTD ? APIC 00060000 LTP 00000000)
[ 0.000000] ACPI: BOOT bf6b9fd8 00028 (v01 PTLTD $SBFTBL$ 00060000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 16520MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00014000 - 0001af00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00015033f4] TEXT DATA BSS ==> [0001000000 - 00015033f4]
[ 0.000000] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000]
[ 0.000000] #5 [0001504000 - 0001511288] BRK ==> [0001504000 - 0001511288]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000100000 - 000098a122] NEW RAMDISK ==> [0000100000 - 000098a122]
[ 0.000000] #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
[ 0.000000] found SMP MP-table at [c00f7f90] f7f90
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x00440000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000bf6b0
[ 0.000000] 0: 0x00100000 -> 0x00440000
[ 0.000000] On node 0 totalpages: 4191804
[ 0.000000] free_area_init_node: node 0, pgdat c13d6100, node_mem_map c1513200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3948 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 33041 pages used for memmap
[ 0.000000] HighMem zone: 3931553 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c9e00000 s37688 r0 d23752 u262144
[ 0.000000] pcpu-alloc: s37688 r0 d23752 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4156987
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:00440000)
[ 0.000000] Memory: 16611372k/17825792k available (2573k kernel code, 154584k reserved, 1394k data, 396k init, 15858376k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13e0000 - 0xc1443000 ( 396 kB)
[ 0.000000] .data : 0xc1283475 - 0xc13dfeb0 (1394 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1283475 (2573 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2132.927 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4265.85 BogoMIPS (lpj=8531708)
[ 0.000015] Security Framework initialized
[ 0.000019] SELinux: Disabled at boot.
[ 0.000024] Mount-cache hash table entries: 512
[ 0.000128] Initializing cgroup subsys ns
[ 0.000132] Initializing cgroup subsys cpuacct
[ 0.000135] Initializing cgroup subsys devices
[ 0.000137] Initializing cgroup subsys freezer
[ 0.000139] Initializing cgroup subsys net_cls
[ 0.000156] CPU: Physical Processor ID: 0
[ 0.000157] CPU: Processor Core ID: 0
[ 0.000161] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000163] CPU: L2 cache: 256K
[ 0.000164] CPU: L3 cache: 4096K
[ 0.000168] mce: CPU supports 9 MCE banks
[ 0.000178] CPU0: Thermal monitoring enabled (TM1)
[ 0.000181] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.000189] using mwait in idle threads.
[ 0.000193] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.000197] ... version: 3
[ 0.000198] ... bit width: 48
[ 0.000199] ... generic registers: 4
[ 0.000201] ... value mask: 0000ffffffffffff
[ 0.000203] ... max period: 000000007fffffff
[ 0.000204] ... fixed-purpose events: 3
[ 0.000205] ... event mask: 000000070000000f
[ 0.000209] Checking 'hlt' instruction... OK.
[ 0.013621] ACPI: Core revision 20090903
[ 0.025295] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.025776] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065453] CPU0: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05
[ 0.172711] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.182917] Initializing CPU#1
[ 0.260611] CPU: Physical Processor ID: 0
[ 0.260612] CPU: Processor Core ID: 1
[ 0.260615] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.260616] CPU: L2 cache: 256K
[ 0.260618] CPU: L3 cache: 4096K
[ 0.260630] CPU1: Thermal monitoring enabled (TM1)
[ 0.260634] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.260739] CPU1: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05
[ 0.260746] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.280839] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.291038] Initializing CPU#2
[ 0.368610] CPU: Physical Processor ID: 0
[ 0.368611] CPU: Processor Core ID: 2
[ 0.368614] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.368615] CPU: L2 cache: 256K
[ 0.368617] CPU: L3 cache: 4096K
[ 0.368629] CPU2: Thermal monitoring enabled (TM1)
[ 0.368633] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.368667] CPU2: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05
[ 0.368674] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.388765] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.398963] Initializing CPU#3
[ 0.476609] CPU: Physical Processor ID: 0
[ 0.476610] CPU: Processor Core ID: 3
[ 0.476613] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.476614] CPU: L2 cache: 256K
[ 0.476615] CPU: L3 cache: 4096K
[ 0.476628] CPU3: Thermal monitoring enabled (TM1)
[ 0.476632] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.476692] CPU3: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05
[ 0.476699] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.496788] Booting processor 4 APIC 0x10 ip 0x6000
[ 0.506986] Initializing CPU#4
[ 0.584608] CPU: Physical Processor ID: 1
[ 0.584609] CPU: Processor Core ID: 0
[ 0.584612] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.584614] CPU: L2 cache: 256K
[ 0.584615] CPU: L3 cache: 4096K
[ 0.584628] CPU4: Thermal monitoring enabled (TM1)
[ 0.584632] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.584714] CPU4: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05
[ 0.584721] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.604792] Booting processor 5 APIC 0x12 ip 0x6000
[ 0.614993] Initializing CPU#5
[ 0.692609] CPU: Physical Processor ID: 1
[ 0.692610] CPU: Processor Core ID: 1
[ 0.692613] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.692615] CPU: L2 cache: 256K
[ 0.692616] CPU: L3 cache: 4096K
[ 0.692631] CPU5: Thermal monitoring enabled (TM1)
[ 0.692635] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.692719] CPU5: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05
[ 0.692726] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.712814] Booting processor 6 APIC 0x14 ip 0x6000
[ 0.723016] Initializing CPU#6
[ 0.800607] CPU: Physical Processor ID: 1
[ 0.800609] CPU: Processor Core ID: 2
[ 0.800612] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.800613] CPU: L2 cache: 256K
[ 0.800615] CPU: L3 cache: 4096K
[ 0.800630] CPU6: Thermal monitoring enabled (TM1)
[ 0.800634] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.800742] CPU6: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05
[ 0.800749] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.820835] Booting processor 7 APIC 0x16 ip 0x6000
[ 0.831036] Initializing CPU#7
[ 0.908606] CPU: Physical Processor ID: 1
[ 0.908607] CPU: Processor Core ID: 3
[ 0.908611] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.908612] CPU: L2 cache: 256K
[ 0.908614] CPU: L3 cache: 4096K
[ 0.908629] CPU7: Thermal monitoring enabled (TM1)
[ 0.908633] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.908664] CPU7: Intel(R) Xeon(R) CPU E5506 @ 2.13GHz stepping 05
[ 0.908671] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.928719] Brought up 8 CPUs
[ 0.928721] Total of 8 processors activated (34132.79 BogoMIPS).
[ 0.931606] CPU0 attaching sched-domain:
[ 0.931609] domain 0: span 0-3 level MC
[ 0.931611] groups: 0 1 2 3
[ 0.931616] domain 1: span 0-7 level CPU
[ 0.931618] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 0.931624] CPU1 attaching sched-domain:
[ 0.931626] domain 0: span 0-3 level MC
[ 0.931628] groups: 1 2 3 0
[ 0.931631] domain 1: span 0-7 level CPU
[ 0.931633] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 0.931638] CPU2 attaching sched-domain:
[ 0.931640] domain 0: span 0-3 level MC
[ 0.931642] groups: 2 3 0 1
[ 0.931646] domain 1: span 0-7 level CPU
[ 0.931647] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 0.931652] CPU3 attaching sched-domain:
[ 0.931654] domain 0: span 0-3 level MC
[ 0.931656] groups: 3 0 1 2
[ 0.931659] domain 1: span 0-7 level CPU
[ 0.931661] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 0.931666] CPU4 attaching sched-domain:
[ 0.931668] domain 0: span 4-7 level MC
[ 0.931670] groups: 4 5 6 7
[ 0.931673] domain 1: span 0-7 level CPU
[ 0.931675] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 0.931680] CPU5 attaching sched-domain:
[ 0.931682] domain 0: span 4-7 level MC
[ 0.931684] groups: 5 6 7 4
[ 0.931687] domain 1: span 0-7 level CPU
[ 0.931689] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 0.931694] CPU6 attaching sched-domain:
[ 0.931696] domain 0: span 4-7 level MC
[ 0.931697] groups: 6 7 4 5
[ 0.931701] domain 1: span 0-7 level CPU
[ 0.931703] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 0.931708] CPU7 attaching sched-domain:
[ 0.931709] domain 0: span 4-7 level MC
[ 0.931711] groups: 7 4 5 6
[ 0.931715] domain 1: span 0-7 level CPU
[ 0.931717] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 0.932155] devtmpfs: initialized
[ 0.932485] regulator: core version 0.5
[ 0.932529] NET: Registered protocol family 16
[ 0.932598] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.932600] ACPI: bus type pci registered
[ 0.932666] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 8
[ 0.932669] PCI: MCFG area at e0000000 reserved in E820
[ 0.932670] PCI: Using MMCONFIG for extended config space
[ 0.932672] PCI: Using configuration type 1 for base access
[ 0.933102] bio: create slab at 0
[ 0.933735] ACPI: EC: Look up EC in DSDT
[ 1.457159] ACPI: Interpreter enabled
[ 1.457164] ACPI: (supports S0 S1 S4 S5)
[ 1.457179] ACPI: Using IOAPIC for interrupt routing
[ 1.461464] ACPI: No dock devices found.
[ 1.461496] ACPI: PCI Root Bridge [CPU0] (0000:ff)
[ 1.461883] pci_bus 0000:ff: on NUMA node 0
[ 1.462449] ACPI: PCI Root Bridge [CPU1] (0000:fe)
[ 1.462892] pci_bus 0000:fe: on NUMA node 0
[ 1.463574] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.463646] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.463650] pci 0000:00:00.0: PME# disabled
[ 1.463718] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.463721] pci 0000:00:01.0: PME# disabled
[ 1.463787] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.463790] pci 0000:00:03.0: PME# disabled
[ 1.463858] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.463861] pci 0000:00:07.0: PME# disabled
[ 1.463927] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 1.463930] pci 0000:00:09.0: PME# disabled
[ 1.464395] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 1.464478] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 1.464545] pci 0000:00:1a.2: reg 20 io port: [0x1860-0x187f]
[ 1.464617] pci 0000:00:1a.7: reg 10 32bit mmio: [0xce000000-0xce0003ff]
[ 1.464669] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.464673] pci 0000:00:1a.7: PME# disabled
[ 1.464735] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.464738] pci 0000:00:1c.0: PME# disabled
[ 1.464807] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.464810] pci 0000:00:1c.4: PME# disabled
[ 1.464872] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.464876] pci 0000:00:1c.5: PME# disabled
[ 1.464928] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
[ 1.465019] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
[ 1.465102] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
[ 1.465172] pci 0000:00:1d.7: reg 10 32bit mmio: [0xce001000-0xce0013ff]
[ 1.465225] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.465229] pci 0000:00:1d.7: PME# disabled
[ 1.465347] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 1.465351] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 1.465355] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0e00 (mask 007f)
[ 1.465359] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 1.465411] pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57]
[ 1.465417] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47]
[ 1.465422] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f]
[ 1.465428] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43]
[ 1.465433] pci 0000:00:1f.2: reg 20 io port: [0x1c10-0x1c1f]
[ 1.465439] pci 0000:00:1f.2: reg 24 io port: [0x1c00-0x1c0f]
[ 1.465484] pci 0000:00:1f.3: reg 10 64bit mmio: [0xce002000-0xce0020ff]
[ 1.465497] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 1.465539] pci 0000:00:1f.5: reg 10 io port: [0x1c68-0x1c6f]
[ 1.465544] pci 0000:00:1f.5: reg 14 io port: [0x1c5c-0x1c5f]
[ 1.465550] pci 0000:00:1f.5: reg 18 io port: [0x1c60-0x1c67]
[ 1.465555] pci 0000:00:1f.5: reg 1c io port: [0x1c58-0x1c5b]
[ 1.465561] pci 0000:00:1f.5: reg 20 io port: [0x1c30-0x1c3f]
[ 1.465566] pci 0000:00:1f.5: reg 24 io port: [0x1c20-0x1c2f]
[ 1.465619] pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff]
[ 1.465627] pci 0000:01:00.0: reg 14 64bit mmio: [0xce100000-0xce103fff]
[ 1.465636] pci 0000:01:00.0: reg 1c 64bit mmio: [0xce180000-0xce1bffff]
[ 1.465645] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x03ffff]
[ 1.465665] pci 0000:01:00.0: supports D1 D2
[ 1.465697] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 1.465701] pci 0000:00:01.0: bridge 32bit mmio: [0xce100000-0xce1fffff]
[ 1.465888] pci 0000:06:00.0: reg 10 32bit mmio: [0xce220000-0xce23ffff]
[ 1.465908] pci 0000:06:00.0: reg 18 io port: [0x3000-0x301f]
[ 1.465919] pci 0000:06:00.0: reg 1c 32bit mmio: [0xce200000-0xce203fff]
[ 1.465999] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 1.466005] pci 0000:06:00.0: PME# disabled
[ 1.466083] pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff]
[ 1.466087] pci 0000:00:1c.4: bridge 32bit mmio: [0xce200000-0xce2fffff]
[ 1.466138] pci 0000:07:00.0: reg 10 32bit mmio pref: [0xcf000000-0xcfffffff]
[ 1.466148] pci 0000:07:00.0: reg 14 32bit mmio: [0xce300000-0xce303fff]
[ 1.466157] pci 0000:07:00.0: reg 18 32bit mmio: [0xce800000-0xceffffff]
[ 1.466252] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.466285] pci 0000:00:1c.5: bridge 32bit mmio: [0xce300000-0xceffffff]
[ 1.466291] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xcf000000-0xcfffffff]
[ 1.466336] pci 0000:00:1e.0: transparent bridge
[ 1.466372] pci_bus 0000:00: on NUMA node 0
[ 1.466375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.466661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1_._PRT]
[ 1.466726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE3_._PRT]
[ 1.466790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE7_._PRT]
[ 1.466853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE9_._PRT]
[ 1.466919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A._PRT]
[ 1.466982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1E._PRT]
[ 1.467024] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1F._PRT]
[ 1.467086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
[ 1.473191] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 1.473280] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 1.473368] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 1.473455] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 1.473531] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 1.473619] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 1.473706] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 1.473792] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 1.473888] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.473890] vgaarb: loaded
[ 1.473943] PCI: Using ACPI for IRQ routing
[ 1.474173] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 1.474179] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.474184] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.484958] Switching to clocksource tsc
[ 1.486373] pnp: PnP ACPI init
[ 1.486396] ACPI: bus type pnp registered
[ 1.488568] pnp: PnP ACPI: found 13 devices
[ 1.488570] ACPI: ACPI bus type pnp unregistered
[ 1.488574] PnPBIOS: Disabled by ACPI PNP
[ 1.488583] system 00:00: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.488590] system 00:04: ioport range 0x200-0x20f has been reserved
[ 1.488593] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 1.488596] system 00:04: ioport range 0x500-0x57f has been reserved
[ 1.488598] system 00:04: ioport range 0x800-0x80f has been reserved
[ 1.488601] system 00:04: ioport range 0x810-0x81f has been reserved
[ 1.488603] system 00:04: ioport range 0xca0-0xca1 has been reserved
[ 1.488606] system 00:04: ioport range 0xca4-0xca7 has been reserved
[ 1.488609] system 00:04: ioport range 0xca8-0xcab has been reserved
[ 1.488611] system 00:04: ioport range 0xcae-0xcaf has been reserved
[ 1.488614] system 00:04: ioport range 0xe00-0xe7f has been reserved
[ 1.488617] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 1.488620] system 00:04: ioport range 0x1100-0x110f has been reserved
[ 1.488622] system 00:04: ioport range 0x1180-0x11ff could not be reserved
[ 1.488625] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
[ 1.488628] system 00:04: ioport range 0xff00-0xff00 has been reserved
[ 1.488632] system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 1.488634] system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 1.488637] system 00:04: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.523525] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.523528] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 1.523533] pci 0000:00:01.0: MEM window: 0xce100000-0xce1fffff
[ 1.523537] pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xc00fffff
[ 1.523542] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.523544] pci 0000:00:03.0: IO window: disabled
[ 1.523547] pci 0000:00:03.0: MEM window: disabled
[ 1.523551] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.523556] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.523557] pci 0000:00:07.0: IO window: disabled
[ 1.523561] pci 0000:00:07.0: MEM window: disabled
[ 1.523564] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.523570] pci 0000:00:09.0: PCI bridge, secondary bus 0000:04
[ 1.523571] pci 0000:00:09.0: IO window: disabled
[ 1.523575] pci 0000:00:09.0: MEM window: disabled
[ 1.523578] pci 0000:00:09.0: PREFETCH window: disabled
[ 1.523584] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 1.523587] pci 0000:00:1c.0: IO window: 0x4000-0x4fff
[ 1.523591] pci 0000:00:1c.0: MEM window: 0xc0100000-0xc02fffff
[ 1.523595] pci 0000:00:1c.0: PREFETCH window: 0x000000c0300000-0x000000c04fffff
[ 1.523601] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 1.523604] pci 0000:00:1c.4: IO window: 0x3000-0x3fff
[ 1.523609] pci 0000:00:1c.4: MEM window: 0xce200000-0xce2fffff
[ 1.523613] pci 0000:00:1c.4: PREFETCH window: 0x000000c0500000-0x000000c06fffff
[ 1.523619] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07
[ 1.523622] pci 0000:00:1c.5: IO window: 0x5000-0x5fff
[ 1.523626] pci 0000:00:1c.5: MEM window: 0xce300000-0xceffffff
[ 1.523630] pci 0000:00:1c.5: PREFETCH window: 0x000000cf000000-0x000000cfffffff
[ 1.523636] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 1.523638] pci 0000:00:1e.0: IO window: disabled
[ 1.523642] pci 0000:00:1e.0: MEM window: disabled
[ 1.523646] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.523663] pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 1.523668] pci 0000:00:01.0: setting latency timer to 64
[ 1.523679] pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 1.523682] pci 0000:00:03.0: setting latency timer to 64
[ 1.523693] pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 1.523696] pci 0000:00:07.0: setting latency timer to 64
[ 1.523705] pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 1.523708] pci 0000:00:09.0: setting latency timer to 64
[ 1.523719] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.523722] pci 0000:00:1c.0: setting latency timer to 64
[ 1.523730] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.523733] pci 0000:00:1c.4: setting latency timer to 64
[ 1.523742] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.523746] pci 0000:00:1c.5: setting latency timer to 64
[ 1.523751] pci 0000:00:1e.0: setting latency timer to 64
[ 1.523756] pci_bus 0000:ff: resource 0 io: [0x00-0xffff]
[ 1.523758] pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.523761] pci_bus 0000:fe: resource 0 io: [0x00-0xffff]
[ 1.523763] pci_bus 0000:fe: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.523766] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.523768] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.523771] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 1.523773] pci_bus 0000:01: resource 1 mem: [0xce100000-0xce1fffff]
[ 1.523775] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xc00fffff]
[ 1.523778] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
[ 1.523780] pci_bus 0000:05: resource 1 mem: [0xc0100000-0xc02fffff]
[ 1.523783] pci_bus 0000:05: resource 2 pref mem [0xc0300000-0xc04fffff]
[ 1.523785] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff]
[ 1.523787] pci_bus 0000:06: resource 1 mem: [0xce200000-0xce2fffff]
[ 1.523790] pci_bus 0000:06: resource 2 pref mem [0xc0500000-0xc06fffff]
[ 1.523792] pci_bus 0000:07: resource 0 io: [0x5000-0x5fff]
[ 1.523794] pci_bus 0000:07: resource 1 mem: [0xce300000-0xceffffff]
[ 1.523796] pci_bus 0000:07: resource 2 pref mem [0xcf000000-0xcfffffff]
[ 1.523799] pci_bus 0000:08: resource 3 io: [0x00-0xffff]
[ 1.523801] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.523828] NET: Registered protocol family 2
[ 1.523905] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.524151] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.524419] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.524541] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.524543] TCP reno registered
[ 1.524617] NET: Registered protocol family 1
[ 1.524796] pci 0000:07:00.0: Boot video device
[ 1.524834] Unpacking initramfs...
[ 1.742711] Freeing initrd memory: 8744k freed
[ 1.745393] DMAR: Host address width 40
[ 1.745397] DMAR: DRHD base: 0x000000fed14000 flags: 0x1
[ 1.745424] IOMMU fed14000: ver 1:0 cap c90780106f0462 ecap f02076
[ 1.745427] DMAR: RMRR base: 0x000000bf6d0000 end: 0x000000bf6e7fff
[ 1.745431] DMAR: RMRR base: 0x000000bf6f0000 end: 0x000000bf6f0fff
[ 1.745435] DMAR: RMRR base: 0x000000bf6f1000 end: 0x000000bf6f1fff
[ 1.745439] DMAR: RMRR base: 0x000000bf6f2000 end: 0x000000bf6f2fff
[ 1.745443] DMAR: RMRR base: 0x000000bf6fa000 end: 0x000000bf6fafff
[ 1.745447] DMAR: RMRR base: 0x000000bf6f3000 end: 0x000000bf6f3fff
[ 1.745451] DMAR: RMRR base: 0x000000bf6f4000 end: 0x000000bf6f4fff
[ 1.745455] DMAR: RMRR base: 0x000000bf6f5000 end: 0x000000bf6f5fff
[ 1.745458] DMAR: RMRR base: 0x000000bf6fb000 end: 0x000000bf6fbfff
[ 1.745462] DMAR: ATSR flags: 0x0
[ 1.745537] Simple Boot Flag at 0x7c set to 0x1
[ 1.746133] audit: initializing netlink socket (disabled)
[ 1.746147] type=2000 audit(1305640483.528:1): initialized
[ 1.750832] highmem bounce pool size: 64 pages
[ 1.750838] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.752068] VFS: Disk quotas dquot_6.5.2
[ 1.752110] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.752183] msgmni has been set to 1490
[ 1.752504] alg: No test for stdrng (krng)
[ 1.752543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.752546] io scheduler noop registered
[ 1.752548] io scheduler anticipatory registered
[ 1.752550] io scheduler deadline registered
[ 1.752584] io scheduler cfq registered (default)
[ 1.752790] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.752798] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.752901] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.752907] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.753008] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.753015] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.753115] pcieport 0000:00:09.0: irq 51 for MSI/MSI-X
[ 1.753121] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.753219] pcieport 0000:00:1c.0: irq 52 for MSI/MSI-X
[ 1.753227] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.753340] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.753347] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.753452] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.753459] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.753539] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.753546] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.753551] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.753556] aer 0000:00:09.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.753639] isapnp: Scanning for PnP cards...
[ 2.107044] isapnp: No Plug & Play device found
[ 2.108181] Linux agpgart interface v0.103
[ 2.108437] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.108542] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.108816] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.108945] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.109092] PNP: No PS/2 controller found. Probing ports directly.
[ 2.109992] i8042.c: No controller found.
[ 2.110101] mice: PS/2 mouse device common for all mice
[ 2.110142] rtc_cmos 00:06: RTC can wake from S4
[ 2.110167] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.110192] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.110201] cpuidle: using governor ladder
[ 2.110203] cpuidle: using governor menu
[ 2.110207] No iBFT detected.
[ 2.110499] TCP cubic registered
[ 2.110613] NET: Registered protocol family 10
[ 2.111246] Mobile IPv6
[ 2.111248] NET: Registered protocol family 17
[ 2.111268] Using IPI No-Shortcut mode
[ 2.111317] PM: Resume from disk failed.
[ 2.111329] registered taskstats version 1
[ 2.111945] rtc_cmos 00:06: setting system clock to 2011-05-17 13:54:44 UTC (1305640484)
[ 2.111974] Initalizing network drop monitor service
[ 2.112009] Freeing unused kernel memory: 396k freed
[ 2.112157] Write protecting the kernel text: 2576k
[ 2.112179] Write protecting the kernel read-only data: 940k
[ 2.125896] udev[116]: starting version 164
[ 2.166263] SCSI subsystem initialized
[ 2.171407] usbcore: registered new interface driver usbfs
[ 2.171429] usbcore: registered new interface driver hub
[ 2.171466] usbcore: registered new device driver usb
[ 2.174780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.174817] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.174836] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.174839] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.174855] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.174886] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.178758] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.178770] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xce000000
[ 2.179184] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 2.179187] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 2.179254] e1000e 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.179290] e1000e 0000:06:00.0: setting latency timer to 64
[ 2.179478] e1000e 0000:06:00.0: irq 55 for MSI/MSI-X
[ 2.179481] e1000e 0000:06:00.0: irq 56 for MSI/MSI-X
[ 2.179485] e1000e 0000:06:00.0: irq 57 for MSI/MSI-X
[ 2.193235] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.193254] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.193256] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.193258] usb usb1: Product: EHCI Host Controller
[ 2.193260] usb usb1: Manufacturer: Linux 2.6.32-5-686-bigmem ehci_hcd
[ 2.193262] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.193323] usb usb1: configuration #1 chosen from 1 choice
[ 2.193346] hub 1-0:1.0: USB hub found
[ 2.193351] hub 1-0:1.0: 6 ports detected
[ 2.193402] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.193415] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.193418] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.193425] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.193455] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.194675] libata version 3.00 loaded.
[ 2.196284] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 2.196303] megasas: 0x1000:0x0079:0x1734:0x1176: bus 1:slot 0:func 0
[ 2.196313] megaraid_sas 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 2.196317] megaraid_sas 0000:01:00.0: setting latency timer to 64
[ 2.196363] megasas: FW now in Ready state
[ 2.197345] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.197354] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xce001000
[ 2.210018] scsi0 : LSI SAS based MegaRAID driver
[ 2.211196] scsi 0:0:4:0: Direct-Access FUJITSU MBA3147RC 5201 PQ: 0 ANSI: 5
[ 2.212035] scsi 0:0:5:0: Direct-Access FUJITSU MBA3147RC 5201 PQ: 0 ANSI: 5
[ 2.212862] scsi 0:0:6:0: Direct-Access FUJITSU MBA3147RC 5201 PQ: 0 ANSI: 5
[ 2.213241] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.213260] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.213263] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.213266] usb usb2: Product: EHCI Host Controller
[ 2.213269] usb usb2: Manufacturer: Linux 2.6.32-5-686-bigmem ehci_hcd
[ 2.213271] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.213334] usb usb2: configuration #1 chosen from 1 choice
[ 2.213355] hub 2-0:1.0: USB hub found
[ 2.213360] hub 2-0:1.0: 6 ports detected
[ 2.213404] ata_piix 0000:00:1f.2: version 2.13
[ 2.213417] ata_piix 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.213421] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.213459] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.213507] scsi1 : ata_piix
[ 2.213556] scsi2 : ata_piix
[ 2.213586] ata1: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c10 irq 16
[ 2.213591] ata2: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c18 irq 16
[ 2.213611] ata_piix 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.213615] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.213650] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.213687] scsi3 : ata_piix
[ 2.213731] scsi4 : ata_piix
[ 2.213768] ata3: SATA max UDMA/133 cmd 0x1c68 ctl 0x1c5c bmdma 0x1c30 irq 17
[ 2.213772] ata4: SATA max UDMA/133 cmd 0x1c60 ctl 0x1c58 bmdma 0x1c38 irq 17
[ 2.214125] scsi 0:0:7:0: Direct-Access ATA WDC WD1002FBYS-0 0C06 PQ: 0 ANSI: 5
[ 2.215987] scsi 0:0:8:0: Direct-Access ATA WDC WD1002FBYS-0 0C06 PQ: 0 ANSI: 5
[ 2.216829] scsi 0:0:9:0: Direct-Access FUJITSU MBA3147RC 5201 PQ: 0 ANSI: 5
[ 2.225336] scsi 0:2:0:0: Direct-Access LSI RAID 5/6 SAS 6G 2.40 PQ: 0 ANSI: 5
[ 2.225417] scsi 0:2:1:0: Direct-Access LSI RAID 5/6 SAS 6G 2.40 PQ: 0 ANSI: 5
[ 2.225505] scsi 0:2:2:0: Direct-Access LSI RAID 5/6 SAS 6G 2.40 PQ: 0 ANSI: 5
[ 2.225591] scsi 0:2:3:0: Direct-Access LSI RAID 5/6 SAS 6G 2.40 PQ: 0 ANSI: 5
[ 2.235884] sd 0:2:0:0: [sda] 285671424 512-byte logical blocks: (146 GB/136 GiB)
[ 2.235890] sd 0:2:1:0: [sdb] 285671424 512-byte logical blocks: (146 GB/136 GiB)
[ 2.235956] sd 0:2:2:0: [sdc] 285671424 512-byte logical blocks: (146 GB/136 GiB)
[ 2.235982] sd 0:2:1:0: [sdb] Write Protect is off
[ 2.235985] sd 0:2:1:0: [sdb] Mode Sense: 1f 00 10 08
[ 2.235990] sd 0:2:3:0: [sdd] 285671424 512-byte logical blocks: (146 GB/136 GiB)
[ 2.236034] sd 0:2:2:0: [sdc] Write Protect is off
[ 2.236037] sd 0:2:2:0: [sdc] Mode Sense: 1f 00 10 08
[ 2.236060] sd 0:2:3:0: [sdd] Write Protect is off
[ 2.236063] sd 0:2:3:0: [sdd] Mode Sense: 1f 00 10 08
[ 2.236072] sd 0:2:2:0: [sdc] Write cache: disabled, read cache: disabled, supports DPO and FUA
[ 2.236096] sd 0:2:3:0: [sdd] Write cache: disabled, read cache: disabled, supports DPO and FUA
[ 2.236115] sd 0:2:1:0: [sdb] Write cache: disabled, read cache: disabled, supports DPO and FUA
[ 2.236151] sd 0:2:0:0: [sda] Write Protect is off
[ 2.236154] sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
[ 2.236207] sd 0:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA
[ 2.236313] sdc:
[ 2.236401] sdd:
[ 2.236421] sdb: sdc1
[ 2.236557] sda: sdd1
[ 2.236607] sdb1
[ 2.236816] sd 0:2:2:0: [sdc] Attached SCSI disk
[ 2.236857] sd 0:2:1:0: [sdb] Attached SCSI disk
[ 2.236893] sd 0:2:3:0: [sdd] Attached SCSI disk
[ 2.244859] sda1 sda2
[ 2.245247] sd 0:2:0:0: [sda] Attached SCSI disk
[ 2.273158] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.273194] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.273201] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.273204] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.273213] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.273241] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00001820
[ 2.273269] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.273272] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.273274] usb usb3: Product: UHCI Host Controller
[ 2.273276] usb usb3: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
[ 2.273278] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.273329] usb usb3: configuration #1 chosen from 1 choice
[ 2.273350] hub 3-0:1.0: USB hub found
[ 2.273355] hub 3-0:1.0: 2 ports detected
[ 2.273393] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.273398] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.273401] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.273407] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.273430] uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001840
[ 2.273454] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.273456] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.273459] usb usb4: Product: UHCI Host Controller
[ 2.273460] usb usb4: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
[ 2.273462] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.273511] usb usb4: configuration #1 chosen from 1 choice
[ 2.273531] hub 4-0:1.0: USB hub found
[ 2.273536] hub 4-0:1.0: 2 ports detected
[ 2.273579] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.273584] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.273587] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.273593] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.273615] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
[ 2.273639] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.273641] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.273643] usb usb5: Product: UHCI Host Controller
[ 2.273645] usb usb5: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
[ 2.273647] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.273691] usb usb5: configuration #1 chosen from 1 choice
[ 2.273710] hub 5-0:1.0: USB hub found
[ 2.273715] hub 5-0:1.0: 2 ports detected
[ 2.273751] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.273757] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.273759] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.273766] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.273788] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 2.273812] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.273815] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.273817] usb usb6: Product: UHCI Host Controller
[ 2.273819] usb usb6: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
[ 2.273821] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.273864] usb usb6: configuration #1 chosen from 1 choice
[ 2.273884] hub 6-0:1.0: USB hub found
[ 2.273889] hub 6-0:1.0: 2 ports detected
[ 2.273927] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 2.273933] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.273935] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.273942] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.273967] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018a0
[ 2.273992] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.273994] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.273996] usb usb7: Product: UHCI Host Controller
[ 2.273998] usb usb7: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
[ 2.274000] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.274043] usb usb7: configuration #1 chosen from 1 choice
[ 2.274063] hub 7-0:1.0: USB hub found
[ 2.274068] hub 7-0:1.0: 2 ports detected
[ 2.274106] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.274115] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.274117] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.274123] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.274149] uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018c0
[ 2.274173] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.274175] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.274177] usb usb8: Product: UHCI Host Controller
[ 2.274179] usb usb8: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
[ 2.274181] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.274237] usb usb8: configuration #1 chosen from 1 choice
[ 2.274257] hub 8-0:1.0: USB hub found
[ 2.274261] hub 8-0:1.0: 2 ports detected
[ 2.297987] 0000:06:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:19:99:9e:49:a6
[ 2.297990] 0000:06:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.298076] 0000:06:00.0: eth0: MAC: 3, PHY: 8, PBA No: 313130-032
[ 2.543663] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.696967] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.709120] ata3.00: ATAPI: HL-DT-ST DVDRAM GH60N, FV03, max UDMA/100
[ 2.729130] ata3.00: configured for UDMA/100
[ 2.744891] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 2.863621] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 2.863636] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 2.874363] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 2.874377] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2.876703] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH60N FV03 PQ: 0 ANSI: 5
[ 2.903284] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.903288] Uniform CD-ROM driver Revision: 3.20
[ 2.903374] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.906625] sd 0:2:0:0: Attached scsi generic sg0 type 0
[ 2.906650] sd 0:2:1:0: Attached scsi generic sg1 type 0
[ 2.906673] sd 0:2:2:0: Attached scsi generic sg2 type 0
[ 2.906701] sd 0:2:3:0: Attached scsi generic sg3 type 0
[ 2.906727] sr 3:0:0:0: Attached scsi generic sg4 type 5
[ 2.915292] usb 3-2: New USB device found, idVendor=046d, idProduct=c001
[ 2.915296] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.915299] usb 3-2: Product: USB Mouse
[ 2.915301] usb 3-2: Manufacturer: Logitech
[ 2.915371] usb 3-2: configuration #1 chosen from 1 choice
[ 2.926205] usbcore: registered new interface driver hiddev
[ 2.940455] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input0
[ 2.940508] generic-usb 0003:046D:C001.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1a.0-2/input0
[ 2.940523] usbcore: registered new interface driver usbhid
[ 2.940525] usbhid: v2.6:USB HID core driver
[ 3.043791] md: linear personality registered for level -1
[ 3.045693] md: multipath personality registered for level -4
[ 3.047254] md: raid0 personality registered for level 0
[ 3.050161] md: raid1 personality registered for level 1
[ 3.051527] async_tx: api initialized (async)
[ 3.052066] xor: automatically using best checksumming function: pIII_sse
[ 3.069065] pIII_sse : 7938.000 MB/sec
[ 3.069067] xor: using function: pIII_sse (7938.000 MB/sec)
[ 3.137057] raid6: int32x1 924 MB/s
[ 3.158053] usb 7-2: new low speed USB device using uhci_hcd and address 2
[ 3.205056] raid6: int32x2 932 MB/s
[ 3.273050] raid6: int32x4 621 MB/s
[ 3.333033] usb 7-2: New USB device found, idVendor=413c, idProduct=2003
[ 3.333037] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.333040] usb 7-2: Product: Dell USB Keyboard
[ 3.333043] usb 7-2: Manufacturer: Dell
[ 3.333113] usb 7-2: configuration #1 chosen from 1 choice
[ 3.341036] raid6: int32x8 609 MB/s
[ 3.351218] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input1
[ 3.351251] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 3.409018] raid6: mmxx1 2926 MB/s
[ 3.477001] raid6: mmxx2 3330 MB/s
[ 3.544984] raid6: sse1x1 2594 MB/s
[ 3.612974] raid6: sse1x2 2936 MB/s
[ 3.680951] raid6: sse2x1 5125 MB/s
[ 3.748935] raid6: sse2x2 5812 MB/s
[ 3.748937] raid6: using algorithm sse2x2 (5812 MB/s)
[ 3.753599] md: raid6 personality registered for level 6
[ 3.753602] md: raid5 personality registered for level 5
[ 3.753603] md: raid4 personality registered for level 4
[ 3.758548] md: raid10 personality registered for level 10
[ 3.768211] md: md0 stopped.
[ 3.769170] md: bind
[ 3.769311] md: bind
[ 3.770167] raid0: looking at sdc
[ 3.770170] raid0: comparing sdc(285669376)
[ 3.770172] with sdc(285669376)
[ 3.770173] raid0: END
[ 3.770174] raid0: ==> UNIQUE
[ 3.770175] raid0: 1 zones
[ 3.770177] raid0: looking at sdd
[ 3.770178] raid0: comparing sdd(285669376)
[ 3.770180] with sdc(285669376)
[ 3.770181] raid0: EQUAL
[ 3.770182] raid0: FINAL 1 zones
[ 3.770186] raid0: done.
[ 3.770187] raid0 : md_size is 571338752 sectors.
[ 3.770189] ******* md0 configuration *********
[ 3.770190] zone0=[sdc/sdd/]
[ 3.770193] zone offset=0kb device offset=0kb size=285669376kb
[ 3.770195] **********************************
[ 3.770196]
[ 3.770202] md0: detected capacity change from 0 to 292525441024
[ 3.770849] md0: unknown partition table
[ 3.979732] PM: Starting manual resume from disk
[ 3.979736] PM: Resume from partition 8:1
[ 3.979737] PM: Checking hibernation image.
[ 3.979874] PM: Error -22 checking image file
[ 3.979877] PM: Resume from disk failed.
[ 4.003365] kjournald starting. Commit interval 5 seconds
[ 4.003370] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.563028] udev[562]: starting version 164
[ 4.676633] ACPI: AC Adapter [PSD] (on-line)
[ 4.678143] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 4.678149] ACPI: Power Button [PWRB]
[ 4.678198] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.678201] ACPI: Power Button [PWRF]
[ 4.688335] processor LNXCPU:00: registered as cooling_device0
[ 4.688428] processor LNXCPU:02: registered as cooling_device1
[ 4.688522] processor LNXCPU:04: registered as cooling_device2
[ 4.688612] processor LNXCPU:06: registered as cooling_device3
[ 4.688717] processor LNXCPU:08: registered as cooling_device4
[ 4.688808] processor LNXCPU:0a: registered as cooling_device5
[ 4.688901] processor LNXCPU:0c: registered as cooling_device6
[ 4.688993] processor LNXCPU:0e: registered as cooling_device7
[ 4.861019] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.008016] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.021902] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.637730] power_meter ACPI000D:00: Found ACPI power meter.
[ 5.840376] Adding 3905528k swap on /dev/sda1. Priority:-1 extents:1 across:3905528k
[ 5.920902] EXT3 FS on sda2, internal journal
[ 5.988136] loop: module loaded
[ 6.110473] kjournald starting. Commit interval 5 seconds
[ 6.117143] EXT3 FS on md0, internal journal
[ 6.117149] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.139290] kjournald starting. Commit interval 5 seconds
[ 6.144957] EXT3 FS on sdb1, internal journal
[ 6.144962] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.006181] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.780847] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 8.780851] 0000:06:00.0: eth0: 10/100 speed: disabling TSO
[ 8.781111] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.249862] eth0: no IPv6 routers present
[ 8640.102560] INFO: task dbench:2254 blocked for more than 120 seconds.
[ 8640.102642] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 8640.102798] dbench D c108dfa6 0 2254 2212 0x00000000
[ 8640.102803] f67b9980 00200082 f1e91550 c108dfa6 00000000 c1441e20 c1441e20 c143d354
[ 8640.102807] f67b9b3c c9e08e20 00000000 e9c6df00 c9117420 00000003 f5c87070 f5c8706c
[ 8640.102818] c9e04354 f67b9b3c 001f5594 c102a9b8 00000000 00000000 00000000 00000000
[ 8640.102829] Call Trace:
[ 8640.102842] [] ? wait_on_page_bit+0x7f/0x88
[ 8640.102852] [] ? __wake_up+0x29/0x39
[ 8640.102863] [] ? log_wait_commit+0xa6/0xed [jbd]
[ 8640.102871] [] ? autoremove_wake_function+0x0/0x2d
[ 8640.102878] [] ? ext3_sync_file+0x8e/0xbc [ext3]
[ 8640.102885] [] ? vfs_fsync_range+0x64/0x84
[ 8640.102889] [] ? vfs_fsync+0x11/0x15
[ 8640.102893] [] ? do_fsync+0x1f/0x2e
[ 8640.102898] [] ? sysenter_do_call+0x12/0x28
[ 8640.102903] INFO: task dbench:2259 blocked for more than 120 seconds.
[ 8640.102955] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 8640.103037] dbench D c108dfa6 0 2259 2212 0x00000000
[ 8640.103041] f649b740 00200086 f704a200 c108dfa6 00000000 c1441e20 c1441e20 c143d354
[ 8640.103045] f649b8fc c9e48e20 00000001 033512ae 000007be 00000003 f5c87070 f5c8706c
[ 8640.103050] c9e04354 f649b8fc 00200292 c102a9b8 00000000 00000000 ca0e1f34 f5c87054
[ 8640.103054] Call Trace:
[ 8640.103057] [] ? wait_on_page_bit+0x7f/0x88
[ 8640.103060] [] ? __wake_up+0x29/0x39
[ 8640.103065] [] ? log_wait_commit+0xa6/0xed [jbd]
[ 8640.103068] [] ? autoremove_wake_function+0x0/0x2d
[ 8640.103073] [] ? ext3_sync_file+0x8e/0xbc [ext3]
[ 8640.103078] [] ? vfs_fsync_range+0x64/0x84
[ 8640.103082] [] ? vfs_fsync+0x11/0x15
[ 8640.103086] [] ? do_fsync+0x1f/0x2e
[ 8640.103090] [] ? sysenter_do_call+0x12/0x28
[ 8880.055728] INFO: task dbench:2254 blocked for more than 120 seconds.
[ 8880.055784] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 8880.055868] dbench D c108dfa6 0 2254 2212 0x00000000
[ 8880.055873] f67b9980 00200082 f704a200 c108dfa6 00000000 c1441e20 c1441e20 c143d354
[ 8880.055878] f67b9b3c c9e48e20 00000001 e9c6df00 c9117420 00000003 f5c87070 f5c8706c
[ 8880.055882] c9e44354 f67b9b3c 001ff9ee c102a9b8 00000000 00000000 00000000 00000000
[ 8880.055887] Call Trace:
[ 8880.055899] [] ? wait_on_page_bit+0x7f/0x88
[ 8880.055907] [] ? __wake_up+0x29/0x39
[ 8880.055917] [] ? log_wait_commit+0xa6/0xed [jbd]
[ 8880.055923] [] ? autoremove_wake_function+0x0/0x2d
[ 8880.055929] [] ? ext3_sync_file+0x8e/0xbc [ext3]
[ 8880.055935] [] ? vfs_fsync_range+0x64/0x84
[ 8880.055937] [] ? vfs_fsync+0x11/0x15
[ 8880.055940] [] ? do_fsync+0x1f/0x2e
[ 8880.055945] [] ? sysenter_do_call+0x12/0x28
[ 8880.055949] INFO: task dbench:2259 blocked for more than 120 seconds.
[ 8880.056001] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 8880.056083] dbench D c108dfa6 0 2259 2212 0x00000000
[ 8880.056087] f649b740 00200086 ca0c4950 c108dfa6 00000000 c1441e20 c1441e20 c143d354
[ 8880.056091] f649b8fc c9e48e20 00000001 ca0e1f00 c9080e80 00000003 f5c87070 f5c8706c
[ 8880.056095] c9e44354 f649b8fc 001ff9f2 c102a9b8 00000000 00000000 00000000 00000000
[ 8880.056100] Call Trace:
[ 8880.056102] [] ? wait_on_page_bit+0x7f/0x88
[ 8880.056106] [] ? __wake_up+0x29/0x39
[ 8880.056110] [] ? log_wait_commit+0xa6/0xed [jbd]
[ 8880.056113] [] ? autoremove_wake_function+0x0/0x2d
[ 8880.056119] [] ? ext3_sync_file+0x8e/0xbc [ext3]
[ 8880.056121] [] ? vfs_fsync_range+0x64/0x84
[ 8880.056124] [] ? vfs_fsync+0x11/0x15
[ 8880.056127] [] ? do_fsync+0x1f/0x2e
[ 8880.056130] [] ? sysenter_do_call+0x12/0x28
[ 9359.965437] INFO: task dbench:2330 blocked for more than 120 seconds.
[ 9359.965493] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 9359.965576] dbench D 00000002 0 2330 2292 0x00000000
[ 9359.965581] f7182640 00200086 ca024350 00000002 00000000 c1441e20 c1441e20 c143d354
[ 9359.965586] f71827fc c9e08e20 00000000 f6b9ff00 c9703500 00000003 f5c87070 f5c8706c
[ 9359.965590] c9e04354 f71827fc 00220e6f c102a9b8 00000000 00000000 00000000 00000000
[ 9359.965594] Call Trace:
[ 9359.965607] [] ? __wake_up+0x29/0x39
[ 9359.965618] [] ? log_wait_commit+0xa6/0xed [jbd]
[ 9359.965625] [] ? autoremove_wake_function+0x0/0x2d
[ 9359.965631] [] ? ext3_sync_file+0x8e/0xbc [ext3]
[ 9359.965636] [] ? vfs_fsync_range+0x64/0x84
[ 9359.965639] [] ? vfs_fsync+0x11/0x15
[ 9359.965642] [] ? do_fsync+0x1f/0x2e
[ 9359.965647] [] ? sysenter_do_call+0x12/0x28
[ 9359.965651] INFO: task dbench:2336 blocked for more than 120 seconds.
[ 9359.965703] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 9359.965785] dbench D c108dfa6 0 2336 2292 0x00000000
[ 9359.965789] f5d8d500 00200086 f704d500 c108dfa6 00000000 c1441e20 c1441e20 c143d354
[ 9359.965793] f5d8d6bc c9f08e20 00000004 f6519f00 c940ae00 00000003 f5c87070 f5c8706c
[ 9359.965798] c9f04354 f5d8d6bc 00220e6c c102a9b8 00000000 00000000 00000000 00000400
[ 9359.965802] Call Trace:
[ 9359.965806] [] ? wait_on_page_bit+0x7f/0x88
[ 9359.965809] [] ? __wake_up+0x29/0x39
[ 9359.965814] [] ? log_wait_commit+0xa6/0xed [jbd]
[ 9359.965817] [] ? autoremove_wake_function+0x0/0x2d
[ 9359.965822] [] ? ext3_sync_file+0x8e/0xbc [ext3]
[ 9359.965825] [] ? vfs_fsync_range+0x64/0x84
[ 9359.965828] [] ? vfs_fsync+0x11/0x15
[ 9359.965831] [] ? do_fsync+0x1f/0x2e
[ 9359.965833] [] ? sysenter_do_call+0x12/0x28
[ 9599.918488] INFO: task dbench:2325 blocked for more than 120 seconds.
[ 9599.918544] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 9599.918627] dbench D 00000002 0 2325 2292 0x00000000
[ 9599.918632] f71861c0 00200086 e3564750 00000002 00000000 c1441e20 c1441e20 c143d354
[ 9599.918637] f718637c c9f08e20 00000004 f60fff00 c9c09900 00000003 f5c87070 f5c8706c
[ 9599.918641] c9f04354 f718637c 0022940e c102a9b8 00000000 00000000 00000000 00000000
[ 9599.918646] Call Trace:
[ 9599.918659] [] ? __wake_up+0x29/0x39
[ 9599.918670] [] ? log_wait_commit+0xa6/0xed [jbd]
[ 9599.918677] [] ? autoremove_wake_function+0x0/0x2d
[ 9599.918682] [] ? ext3_sync_file+0x8e/0xbc [ext3]
[ 9599.918688] [] ? vfs_fsync_range+0x64/0x84
[ 9599.918691] [] ? vfs_fsync+0x11/0x15
[ 9599.918694] [] ? do_fsync+0x1f/0x2e
[ 9599.918699] [] ? sysenter_do_call+0x12/0x28
[ 9599.918703] INFO: task dbench:2330 blocked for more than 120 seconds.
[ 9599.918755] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 9599.918837] dbench D 00000002 0 2330 2292 0x00000000
[ 9599.918840] f7182640 00200086 f704a200 00000002 00000000 c1441e20 c1441e20 c143d354
[ 9599.918845] f71827fc c9e48e20 00000001 f6b9ff00 c9703500 00000003 f5c87070 f5c8706c
[ 9599.918849] c9e44354 f71827fc 002293a6 c102a9b8 00000000 00000000 00000000 00000000
[ 9599.918853] Call Trace:
[ 9599.918856] [] ? __wake_up+0x29/0x39
[ 9599.918861] [] ? log_wait_commit+0xa6/0xed [jbd]
[ 9599.918864] [] ? autoremove_wake_function+0x0/0x2d
[ 9599.918869] [] ? ext3_sync_file+0x8e/0xbc [ext3]
[ 9599.918872] [] ? vfs_fsync_range+0x64/0x84
[ 9599.918875] [] ? vfs_fsync+0x11/0x15
[ 9599.918878] [] ? do_fsync+0x1f/0x2e
[ 9599.918880] [] ? sysenter_do_call+0x12/0x28
[10079.826950] INFO: task flush-9:0:1705 blocked for more than 120 seconds.
[10079.827007] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[10079.827089] flush-9:0 D c840b140 0 1705 2 0x00000000
[10079.827094] f6b1ee80 00000046 f704e600 c840b140 00000000 c1441e20 c1441e20 c143d354
[10079.827099] f6b1f03c c9f48e20 00000005 c840b8e0 c840b900 c840b920 c6a3c540 00000000
[10079.827104] c9f44354 f6b1f03c 0024d398 00000400 00000078 00000000 00000000 00000400
[10079.827108] Call Trace:
[10079.827121] [] ? inode_wait+0x5/0x8
[10079.827129] [] ? __wait_on_bit+0x33/0x58
[10079.827132] [] ? inode_wait+0x0/0x8
[10079.827138] [] ? inode_wait_for_writeback+0x77/0x93
[10079.827144] [] ? wake_bit_function+0x0/0x3c
[10079.827147] [] ? wb_writeback+0x163/0x178
[10079.827150] [] ? wb_do_writeback+0x121/0x131
[10079.827155] [] ? process_timeout+0x0/0x5
[10079.827158] [] ? bdi_writeback_task+0x21/0x89
[10079.827163] [] ? bdi_start_fn+0x59/0xa4
[10079.827165] [] ? bdi_start_fn+0x0/0xa4
[10079.827168] [] ? kthread+0x61/0x66
[10079.827170] [] ? kthread+0x0/0x66
[10079.827176] [] ? kernel_thread_helper+0x7/0x10
[10199.805243] INFO: task dbench:2376 blocked for more than 120 seconds.
[10199.805299] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[10199.805381] dbench D 00000002 0 2376 2371 0x00000000
[10199.805386] f6498000 00200082 f704e600 00000002 00000000 c1441e20 c1441e20 c143d354
[10199.805391] f64981bc c9f48e20 00000005 e7fe2596 0000090f 00000003 f5c87070 f5c8706c
[10199.805396] c9f04354 f64981bc 00200292 c102a9b8 00000000 00000000 d3bb7f34 f5c87054
[10199.805400] Call Trace:
[10199.805413] [] ? __wake_up+0x29/0x39
[10199.805423] [] ? log_wait_commit+0xa6/0xed [jbd]
[10199.805430] [] ? autoremove_wake_function+0x0/0x2d
[10199.805436] [] ? ext3_sync_file+0x8e/0xbc [ext3]
[10199.805441] [] ? vfs_fsync_range+0x64/0x84
[10199.805444] [] ? vfs_fsync+0x11/0x15
[10199.805447] [] ? do_fsync+0x1f/0x2e
[10199.805452] [] ? sysenter_do_call+0x12/0x28
[15286.422644] fio[3397]: segfault at 0 ip 08060b33 sp bf92c210 error 6 in fio[8048000+2f000]
[15320.067775] fio[3404]: segfault at 0 ip 08060b33 sp bf89c700 error 6 in fio[8048000+2f000]
[15353.896884] fio[3411]: segfault at 0 ip 08060b33 sp bf99eaa0 error 6 in fio[8048000+2f000]
[53189.467561] fio[5869]: segfault at 0 ip 08060b33 sp bf875670 error 6 in fio[8048000+2f000]
[53260.596966] fio[5877]: segfault at 0 ip 08060b33 sp bf877830 error 6 in fio[8048000+2f000]
[53330.335129] fio[5885]: segfault at 0 ip 08060b33 sp bfd0ff40 error 6 in fio[8048000+2f000]
[92322.355474] fio[8644]: segfault at 0 ip 08060b33 sp bfbaf950 error 6 in fio[8048000+2f000]
[92393.879965] fio[8652]: segfault at 0 ip 08060b33 sp bfab1820 error 6 in fio[8048000+2f000]
[92464.186026] fio[8660]: segfault at 0 ip 08060b33 sp bfe8bb20 error 6 in fio[8048000+2f000]
[95179.453651] md: md0 still in use.
[95196.501808] md: md0 stopped.
[95196.501815] md: unbind
[95196.552522] md: export_rdev(sdc)
[95196.552539] md: unbind
[95196.596512] md: export_rdev(sdd)
[95196.596546] md0: detected capacity change from 292525441024 to 0
[95436.280090] sdc:
[95448.153497] sdd:
[95622.919629] sdc: sdc1
[95637.441941] sdd: sdd1
[95704.652572] md: bind
[95704.658689] md: bind
[95704.689600] raid1: md0 is not clean -- starting background reconstruction
[95704.689604] raid1: raid set md0 active with 2 out of 2 mirrors
[95704.689629] md0: detected capacity change from 0 to 146260773888
[95704.689806] md0: unknown partition table
[95780.471360] VFS: Can't find ext3 filesystem on dev md0.
[95837.881873] md: resync of RAID array md0
[95837.881876] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[95837.881879] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[95837.881884] md: using 128k window, over a total of 142832787 blocks.
[97903.805263] md: md0: resync done.
[97903.863350] RAID1 conf printout:
[97903.863353] --- wd:2 rd:2
[97903.863356] disk 0, wo:0, o:1, dev:sdc1
[97903.863359] disk 1, wo:0, o:1, dev:sdd1
[98205.738575] kjournald starting. Commit interval 5 seconds
[98205.751015] EXT3 FS on md0, internal journal
[98205.751022] EXT3-fs: mounted filesystem with ordered data mode.
[117562.509761] fio[13001]: segfault at 0 ip 08060b33 sp bf82b090 error 6 in fio[8048000+2f000]
[117616.700029] fio[13009]: segfault at 0 ip 08060b33 sp bf8b6eb0 error 6 in fio[8048000+2f000]
[117672.244972] fio[13016]: segfault at 0 ip 08060b33 sp bfae4ab0 error 6 in fio[8048000+2f000]