dmesg - zlh
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 7 21:35:22 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7f90000 (usable)
[ 0.000000] BIOS-e820: 00000000c7f90000 - 00000000c7f9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7f9e000 - 00000000c7fe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7fe0000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000138000000 aka 4992M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xc7f90 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7f90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] 00c7e00000 - 00c7f90000 page 4k
[ 0.000000] kernel direct mapping tables up to c7f90000 @ 8000-b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ a000-c000
[ 0.000000] RAMDISK: 3773f000 - 37fef6b2
[ 0.000000] ACPI: RSDP 00000000000fa260 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000c7f90100 00064 (v01 LENOVO TC-5O 00000123 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7f90290 000F4 (v04 LENOVO TC-5O 00000123 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 00000000c7f905d0 05B30 (v02 LENOVO TC-5O 00000123 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000c7f9e000 00040
[ 0.000000] ACPI: APIC 00000000c7f90390 0007C (v02 LENOVO TC-5O 00000123 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7f90410 0003C (v01 LENOVO TC-5O 00000123 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000c7f90450 00176 (v01 LENOVO TC-5O 00000123 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7f9e040 00072 (v01 LENOVO TC-5O 00000123 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000c7f9a5d0 000E8 (v03 LENOVO TC-5O 00000123 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000c7f9a6c0 00038 (v01 LENOVO TC-5O 00000123 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7f9a700 0088C (v01 LENOVO TC-5O 00000123 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-c8000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-138000000
[ 0.000000] NUMA: Allocated memnodemap from b000 - d740
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [000000000000d740 - 000000000001573f]
[ 0.000000] bootmap [0000000000016000 - 000000000003cfff] pages 27
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0138000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a454] TEXT DATA BSS ==> [0001000000 - 000168a454]
[ 0.000000] #3 [003773f000 - 0037fef6b2] RAMDISK ==> [003773f000 - 0037fef6b2]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b19a] BRK ==> [000168b000 - 000168b19a]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] #8 [000000b000 - 000000d740] MEMNODEMAP ==> [000000b000 - 000000d740]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7f90
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 1048367
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3839 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 800712 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7f90000 - 00000000c7f9e000
[ 0.000000] PM: Registered nosave memory: 00000000c7f9e000 - 00000000c7fe0000
[ 0.000000] PM: Registered nosave memory: 00000000c7fe0000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:37f00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u262144
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030791
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ fbe2000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 4051768k/5111808k available (3080k kernel code, 918340k absent, 141700k reserved, 1891k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:456
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2792.936 MHz processor.
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5585.86 BogoMIPS (lpj=11171728)
[ 0.008021] Security Framework initialized
[ 0.008025] SELinux: Disabled at boot.
[ 0.008281] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012053] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012594] Mount-cache hash table entries: 256
[ 0.012690] Initializing cgroup subsys ns
[ 0.012692] Initializing cgroup subsys cpuacct
[ 0.012695] Initializing cgroup subsys devices
[ 0.012697] Initializing cgroup subsys freezer
[ 0.012698] Initializing cgroup subsys net_cls
[ 0.012713] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012715] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012717] CPU 0/0x0 -> Node 0
[ 0.012719] tseg: 0000000000
[ 0.012727] CPU: Physical Processor ID: 0
[ 0.012728] CPU: Processor Core ID: 0
[ 0.012730] mce: CPU supports 6 MCE banks
[ 0.012738] Performance Events: AMD PMU driver.
[ 0.012741] ... version: 0
[ 0.012742] ... bit width: 48
[ 0.012743] ... generic registers: 4
[ 0.012744] ... value mask: 0000ffffffffffff
[ 0.012745] ... max period: 00007fffffffffff
[ 0.012746] ... fixed-purpose events: 0
[ 0.012747] ... event mask: 000000000000000f
[ 0.013316] ACPI: Core revision 20090903
[ 0.020062] Setting APIC routing to flat
[ 0.020357] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061287] CPU0: AMD Phenom(tm) II X4 830 Processor stepping 03
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] CPU 1/0x1 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.148080] CPU1: AMD Phenom(tm) II X4 830 Processor stepping 03
[ 0.148089] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152051] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.012000] Initializing CPU#2
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] CPU 2/0x2 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 2
[ 0.240098] CPU2: AMD Phenom(tm) II X4 830 Processor stepping 03
[ 0.240112] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.244045] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.012000] Initializing CPU#3
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] CPU 3/0x3 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 3
[ 0.332018] CPU3: AMD Phenom(tm) II X4 830 Processor stepping 03
[ 0.332023] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.336011] Brought up 4 CPUs
[ 0.336013] Total of 4 processors activated (22343.93 BogoMIPS).
[ 0.337794] CPU0 attaching sched-domain:
[ 0.337797] domain 0: span 0-3 level MC
[ 0.337798] groups: 0 1 2 3
[ 0.337803] CPU1 attaching sched-domain:
[ 0.337805] domain 0: span 0-3 level MC
[ 0.337806] groups: 1 2 3 0
[ 0.337810] CPU2 attaching sched-domain:
[ 0.337812] domain 0: span 0-3 level MC
[ 0.337813] groups: 2 3 0 1
[ 0.337817] CPU3 attaching sched-domain:
[ 0.337818] domain 0: span 0-3 level MC
[ 0.337820] groups: 3 0 1 2
[ 0.337883] devtmpfs: initialized
[ 0.340360] regulator: core version 0.5
[ 0.340360] NET: Registered protocol family 16
[ 0.340360] node 0 link 0: io port [1000, ffffff]
[ 0.340360] TOM: 00000000c8000000 aka 3200M
[ 0.340360] Fam 10h mmconf [e0000000, efffffff]
[ 0.340360] node 0 link 0: mmio [a0000, bffff]
[ 0.340360] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.340360] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.340360] node 0 link 0: mmio [f0000000, ffefffff]
[ 0.340360] TOM2: 0000000138000000 aka 4992M
[ 0.340360] bus: [00,07] on node 0 link 0
[ 0.340360] bus: 00 index 0 io port: [0, ffff]
[ 0.340360] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.340360] bus: 00 index 2 mmio: [c8000000, dfffffff]
[ 0.340360] bus: 00 index 3 mmio: [f0000000, ffffffff]
[ 0.340360] bus: 00 index 4 mmio: [138000000, fcffffffff]
[ 0.340360] ACPI: bus type pci registered
[ 0.340360] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.340360] PCI: Not using MMCONFIG.
[ 0.340360] PCI: Using configuration type 1 for base access
[ 0.340360] PCI: Using configuration type 1 for extended access
[ 0.340413] bio: create slab at 0
[ 0.340413] ACPI: EC: Look up EC in DSDT
[ 0.342449] ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND
[ 0.342454] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff8166d8d0), AE_NOT_FOUND
[ 0.342598] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.349495] ACPI: Interpreter enabled
[ 0.349497] ACPI: (supports S0 S3 S4 S5)
[ 0.349511] ACPI: Using IOAPIC for interrupt routing
[ 0.349610] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.351590] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 0.351594] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 0.351597] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff880137a4a900), AE_NOT_EXIST
[ 0.351614] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node ffff880137a4a900), AE_NOT_EXIST
[ 0.351623] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 0.351627] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 0.351630] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff880137a4a9e0), AE_NOT_EXIST
[ 0.351646] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node ffff880137a4a9e0), AE_NOT_EXIST
[ 0.351656] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 0.351659] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 0.351662] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff880137a4abc0), AE_NOT_EXIST
[ 0.351679] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node ffff880137a4abc0), AE_NOT_EXIST
[ 0.351687] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 0.351691] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 0.351694] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff880137a4aca0), AE_NOT_EXIST
[ 0.351710] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node ffff880137a4aca0), AE_NOT_EXIST
[ 0.354045] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.359075] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.364824] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 0.364828] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 0.364831] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff880137a4a900), AE_NOT_EXIST
[ 0.364855] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 0.364858] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 0.364861] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff880137a4a9e0), AE_NOT_EXIST
[ 0.364902] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 0.364905] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 0.364908] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff880137a4abc0), AE_NOT_EXIST
[ 0.364931] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 0.364934] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 0.364938] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff880137a4aca0), AE_NOT_EXIST
[ 0.365084] ACPI Warning: Incorrect checksum in table [OEMB] - 4C, should be 4B (20090903/tbutils-314)
[ 0.365187] ACPI: No dock devices found.
[ 0.365303] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.365381] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.365384] pci 0000:00:02.0: PME# disabled
[ 0.365415] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.365417] pci 0000:00:07.0: PME# disabled
[ 0.365464] pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007]
[ 0.365470] pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003]
[ 0.365476] pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007]
[ 0.365482] pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003]
[ 0.365488] pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f]
[ 0.365494] pci 0000:00:11.0: reg 24 32bit mmio: [0xfcfffc00-0xfcffffff]
[ 0.365510] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.365549] pci 0000:00:12.0: reg 10 32bit mmio: [0xfcffe000-0xfcffefff]
[ 0.365598] pci 0000:00:12.1: reg 10 32bit mmio: [0xfcffd000-0xfcffdfff]
[ 0.365662] pci 0000:00:12.2: reg 10 32bit mmio: [0xfcfff800-0xfcfff8ff]
[ 0.365708] pci 0000:00:12.2: supports D1 D2
[ 0.365709] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.365713] pci 0000:00:12.2: PME# disabled
[ 0.365741] pci 0000:00:13.0: reg 10 32bit mmio: [0xfcffc000-0xfcffcfff]
[ 0.365789] pci 0000:00:13.1: reg 10 32bit mmio: [0xfcffb000-0xfcffbfff]
[ 0.365854] pci 0000:00:13.2: reg 10 32bit mmio: [0xfcfff400-0xfcfff4ff]
[ 0.365900] pci 0000:00:13.2: supports D1 D2
[ 0.365902] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.365905] pci 0000:00:13.2: PME# disabled
[ 0.366014] pci 0000:00:14.2: reg 10 64bit mmio: [0xfcff4000-0xfcff7fff]
[ 0.366052] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.366055] pci 0000:00:14.2: PME# disabled
[ 0.366149] pci 0000:00:14.5: reg 10 32bit mmio: [0xfcffa000-0xfcffafff]
[ 0.366271] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.366279] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.366286] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xce000000-0xcfffffff]
[ 0.366291] pci 0000:01:00.0: reg 24 io port: [0xc800-0xc87f]
[ 0.366295] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfea80000-0xfeafffff]
[ 0.366343] pci 0000:01:00.1: reg 10 32bit mmio: [0xfea7c000-0xfea7ffff]
[ 0.372082] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.372086] pci 0000:00:02.0: bridge 32bit mmio: [0xfd000000-0xfeafffff]
[ 0.372089] pci 0000:00:02.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff]
[ 0.372132] pci 0000:02:00.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff]
[ 0.372138] pci 0000:02:00.0: reg 18 io port: [0xd800-0xd8ff]
[ 0.372156] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfebc0000-0xfebdffff]
[ 0.372180] pci 0000:02:00.0: supports D1 D2
[ 0.372182] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.372185] pci 0000:02:00.0: PME# disabled
[ 0.380079] pci 0000:00:07.0: bridge io port: [0xd000-0xdfff]
[ 0.380082] pci 0000:00:07.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.380136] pci 0000:03:05.0: reg 14 io port: [0xe800-0xe807]
[ 0.380143] pci 0000:03:05.0: reg 18 io port: [0xe400-0xe407]
[ 0.380151] pci 0000:03:05.0: reg 1c io port: [0xe000-0xe00f]
[ 0.380190] pci 0000:03:05.0: PME# supported from D3hot
[ 0.380194] pci 0000:03:05.0: PME# disabled
[ 0.380244] pci 0000:00:14.4: transparent bridge
[ 0.380247] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.380265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.380445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.380491] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.380546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.383710] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.383796] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.383871] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.383944] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.384035] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.384122] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.384211] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.384295] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.384360] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.384363] vgaarb: loaded
[ 0.384374] PCI: Using ACPI for IRQ routing
[ 0.384374] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.384374] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.386171] Switching to clocksource tsc
[ 0.386181] pnp: PnP ACPI init
[ 0.386181] ACPI: bus type pnp registered
[ 1.388975] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 1.388979] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 1.388983] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff880137a4a900), AE_NOT_EXIST
[ 1.389000] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node ffff880137a4a900), AE_NOT_EXIST
[ 1.389009] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 1.389012] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 1.389015] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff880137a4a9e0), AE_NOT_EXIST
[ 1.389031] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node ffff880137a4a9e0), AE_NOT_EXIST
[ 1.389041] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 1.389044] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 1.389047] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff880137a4abc0), AE_NOT_EXIST
[ 1.389063] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node ffff880137a4abc0), AE_NOT_EXIST
[ 1.389072] ACPI Error: No handler for Region [SACS] (ffff880137a9f288) [PCI_Config] (20090903/evregion-319)
[ 1.389075] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295)
[ 1.389077] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff880137a4aca0), AE_NOT_EXIST
[ 1.389094] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node ffff880137a4aca0), AE_NOT_EXIST
[ 1.389097] pnp: PnP ACPI: found 14 devices
[ 1.389099] ACPI: ACPI bus type pnp unregistered
[ 1.389108] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.389111] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.389115] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 1.389117] system 00:09: ioport range 0x40b-0x40b has been reserved
[ 1.389118] system 00:09: ioport range 0x4d6-0x4d6 has been reserved
[ 1.389120] system 00:09: ioport range 0xc00-0xc01 has been reserved
[ 1.389122] system 00:09: ioport range 0xc14-0xc14 has been reserved
[ 1.389124] system 00:09: ioport range 0xc50-0xc51 has been reserved
[ 1.389126] system 00:09: ioport range 0xc52-0xc52 has been reserved
[ 1.389128] system 00:09: ioport range 0xc6c-0xc6c has been reserved
[ 1.389130] system 00:09: ioport range 0xc6f-0xc6f has been reserved
[ 1.389132] system 00:09: ioport range 0xcd0-0xcd1 has been reserved
[ 1.389133] system 00:09: ioport range 0xcd2-0xcd3 has been reserved
[ 1.389135] system 00:09: ioport range 0xcd4-0xcd5 has been reserved
[ 1.389139] system 00:09: ioport range 0xcd6-0xcd7 has been reserved
[ 1.389140] system 00:09: ioport range 0xcd8-0xcdf has been reserved
[ 1.389142] system 00:09: ioport range 0x800-0x89f has been reserved
[ 1.389144] system 00:09: ioport range 0xb00-0xb0f has been reserved
[ 1.389146] system 00:09: ioport range 0xb20-0xb3f has been reserved
[ 1.389148] system 00:09: ioport range 0x900-0x90f has been reserved
[ 1.389150] system 00:09: ioport range 0x910-0x91f has been reserved
[ 1.389152] system 00:09: ioport range 0xfe00-0xfefe has been reserved
[ 1.389155] system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
[ 1.389157] system 00:09: iomem range 0xfec10000-0xfec1001f has been reserved
[ 1.389160] system 00:0b: ioport range 0xe00-0xe0f has been reserved
[ 1.389162] system 00:0b: ioport range 0xe80-0xe8f has been reserved
[ 1.389164] system 00:0b: ioport range 0xf40-0xf4f has been reserved
[ 1.389166] system 00:0b: ioport range 0xa30-0xa3f has been reserved
[ 1.389169] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.389173] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 1.389175] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 1.389177] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 1.389179] system 00:0d: iomem range 0x100000-0xc7ffffff could not be reserved
[ 1.389181] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[ 1.393902] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 1.393905] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 1.393907] pci 0000:00:02.0: MEM window: 0xfd000000-0xfeafffff
[ 1.393909] pci 0000:00:02.0: PREFETCH window: 0x000000ce000000-0x000000dfffffff
[ 1.393913] pci 0000:00:07.0: PCI bridge, secondary bus 0000:02
[ 1.393915] pci 0000:00:07.0: IO window: 0xd000-0xdfff
[ 1.393917] pci 0000:00:07.0: MEM window: 0xfeb00000-0xfebfffff
[ 1.393919] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.393922] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 1.393924] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 1.393928] pci 0000:00:14.4: MEM window: disabled
[ 1.393931] pci 0000:00:14.4: PREFETCH window: disabled
[ 1.393941] alloc irq_desc for 18 on node 0
[ 1.393942] alloc kstat_irqs on node 0
[ 1.393947] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.393950] pci 0000:00:02.0: setting latency timer to 64
[ 1.393954] alloc irq_desc for 19 on node 0
[ 1.393955] alloc kstat_irqs on node 0
[ 1.393957] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.393959] pci 0000:00:07.0: setting latency timer to 64
[ 1.393965] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.393967] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.393969] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 1.393970] pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfeafffff]
[ 1.393972] pci_bus 0000:01: resource 2 pref mem [0xce000000-0xdfffffff]
[ 1.393974] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 1.393975] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 1.393977] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 1.393979] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 1.393980] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.394000] NET: Registered protocol family 2
[ 1.394109] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.394860] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.397052] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.397336] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.397338] TCP reno registered
[ 1.397418] NET: Registered protocol family 1
[ 1.540044] pci 0000:01:00.0: Boot video device
[ 1.540088] Unpacking initramfs...
[ 1.686390] Freeing initrd memory: 8897k freed
[ 1.689335] PCI-DMA: Disabling AGP.
[ 1.689416] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.689418] PCI-DMA: using GART IOMMU.
[ 1.689420] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.691257] audit: initializing netlink socket (disabled)
[ 1.691271] type=2000 audit(1305679991.688:1): initialized
[ 1.693628] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.694581] VFS: Disk quotas dquot_6.5.2
[ 1.694616] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.694666] msgmni has been set to 7930
[ 1.694851] alg: No test for stdrng (krng)
[ 1.694884] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.694887] io scheduler noop registered
[ 1.694888] io scheduler anticipatory registered
[ 1.694889] io scheduler deadline registered
[ 1.694909] io scheduler cfq registered (default)
[ 1.694995] alloc irq_desc for 24 on node 0
[ 1.694997] alloc kstat_irqs on node 0
[ 1.695003] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[ 1.695007] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.695091] alloc irq_desc for 25 on node 0
[ 1.695092] alloc kstat_irqs on node 0
[ 1.695096] pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
[ 1.695099] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.695997] Linux agpgart interface v0.103
[ 1.696121] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.696359] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.696487] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.696521] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.696522] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.696640] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.696711] mice: PS/2 mouse device common for all mice
[ 1.696744] rtc_cmos 00:03: RTC can wake from S4
[ 1.696767] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.696789] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.696797] cpuidle: using governor ladder
[ 1.696799] cpuidle: using governor menu
[ 1.696802] No iBFT detected.
[ 1.697039] TCP cubic registered
[ 1.697110] NET: Registered protocol family 10
[ 1.697655] Mobile IPv6
[ 1.697657] NET: Registered protocol family 17
[ 1.697709] PM: Resume from disk failed.
[ 1.697715] registered taskstats version 1
[ 1.698003] rtc_cmos 00:03: setting system clock to 2011-05-18 00:53:12 UTC (1305679992)
[ 1.698021] Initalizing network drop monitor service
[ 1.698042] Freeing unused kernel memory: 592k freed
[ 1.698147] Write protecting the kernel read-only data: 4236k
[ 1.709065] udev[102]: starting version 164
[ 1.714482] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.747465] SCSI subsystem initialized
[ 1.748570] usbcore: registered new interface driver usbfs
[ 1.748588] usbcore: registered new interface driver hub
[ 1.748682] usbcore: registered new device driver usb
[ 1.750019] sky2 driver version 1.28
[ 1.750105] sky2 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.750116] sky2 0000:02:00.0: setting latency timer to 64
[ 1.750151] sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
[ 1.750207] alloc irq_desc for 26 on node 0
[ 1.750209] alloc kstat_irqs on node 0
[ 1.750219] sky2 0000:02:00.0: irq 26 for MSI/MSI-X
[ 1.750657] sky2 eth0: addr 44:37:e6:2b:89:c9
[ 1.752273] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.752375] alloc irq_desc for 17 on node 0
[ 1.752377] alloc kstat_irqs on node 0
[ 1.752382] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.752403] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.752420] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.752451] ehci_hcd 0000:00:12.2: debug port 1
[ 1.752469] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfcfff800
[ 1.762751] libata version 3.00 loaded.
[ 1.764022] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.764039] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.764041] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.764043] usb usb1: Product: EHCI Host Controller
[ 1.764044] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.764045] usb usb1: SerialNumber: 0000:00:12.2
[ 1.764109] usb usb1: configuration #1 chosen from 1 choice
[ 1.764128] hub 1-0:1.0: USB hub found
[ 1.764133] hub 1-0:1.0: 6 ports detected
[ 1.764214] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.764241] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.764250] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.764275] ehci_hcd 0000:00:13.2: debug port 1
[ 1.764293] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfcfff400
[ 1.776022] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.776040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.776042] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.776044] usb usb2: Product: EHCI Host Controller
[ 1.776045] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.776046] usb usb2: SerialNumber: 0000:00:13.2
[ 1.776093] usb usb2: configuration #1 chosen from 1 choice
[ 1.776113] hub 2-0:1.0: USB hub found
[ 1.776118] hub 2-0:1.0: 6 ports detected
[ 1.776203] ahci 0000:00:11.0: version 3.0
[ 1.776213] alloc irq_desc for 22 on node 0
[ 1.776214] alloc kstat_irqs on node 0
[ 1.776219] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.776309] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.776312] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.776501] scsi0 : ahci
[ 1.776575] scsi1 : ahci
[ 1.776615] scsi2 : ahci
[ 1.776652] scsi3 : ahci
[ 1.776680] ata1: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd00 irq 22
[ 1.776682] ata2: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffd80 irq 22
[ 1.776685] ata3: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe00 irq 22
[ 1.776688] ata4: SATA max UDMA/133 abar m1024@0xfcfffc00 port 0xfcfffe80 irq 22
[ 1.777200] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.777245] alloc irq_desc for 16 on node 0
[ 1.777246] alloc kstat_irqs on node 0
[ 1.777250] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.777267] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.777276] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.777298] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfcffe000
[ 1.836019] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.836021] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.836023] usb usb3: Product: OHCI Host Controller
[ 1.836024] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.836026] usb usb3: SerialNumber: 0000:00:12.0
[ 1.836078] usb usb3: configuration #1 chosen from 1 choice
[ 1.836095] hub 3-0:1.0: USB hub found
[ 1.836106] hub 3-0:1.0: 3 ports detected
[ 1.836197] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.836209] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.836216] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.836231] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfcffd000
[ 1.896013] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.896016] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.896017] usb usb4: Product: OHCI Host Controller
[ 1.896019] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.896020] usb usb4: SerialNumber: 0000:00:12.1
[ 1.896072] usb usb4: configuration #1 chosen from 1 choice
[ 1.896092] hub 4-0:1.0: USB hub found
[ 1.896103] hub 4-0:1.0: 3 ports detected
[ 1.896189] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.896201] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.896208] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.896229] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfcffc000
[ 1.956016] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.956018] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.956020] usb usb5: Product: OHCI Host Controller
[ 1.956021] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.956022] usb usb5: SerialNumber: 0000:00:13.0
[ 1.956073] usb usb5: configuration #1 chosen from 1 choice
[ 1.956090] hub 5-0:1.0: USB hub found
[ 1.956101] hub 5-0:1.0: 3 ports detected
[ 1.956184] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.956195] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.956201] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.956216] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfcffb000
[ 2.016024] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.016026] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.016028] usb usb6: Product: OHCI Host Controller
[ 2.016029] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 2.016030] usb usb6: SerialNumber: 0000:00:13.1
[ 2.016074] usb usb6: configuration #1 chosen from 1 choice
[ 2.016094] hub 6-0:1.0: USB hub found
[ 2.016104] hub 6-0:1.0: 3 ports detected
[ 2.016190] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.016203] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.016209] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.016223] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfcffa000
[ 2.076022] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.076024] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.076026] usb usb7: Product: OHCI Host Controller
[ 2.076027] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 2.076028] usb usb7: SerialNumber: 0000:00:14.5
[ 2.076075] usb usb7: configuration #1 chosen from 1 choice
[ 2.076092] hub 7-0:1.0: USB hub found
[ 2.076102] hub 7-0:1.0: 2 ports detected
[ 2.096050] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.096086] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.260042] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.260045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.261562] ata3.00: ATAPI: Optiarc DVD RW AD-7250H, 1.D2, max UDMA/100
[ 2.263356] ata3.00: configured for UDMA/100
[ 2.264999] ata1.00: ATA-8: ST3500418AS, CC68, max UDMA/100
[ 2.265010] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.266280] ata1.00: configured for UDMA/100
[ 2.281134] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC68 PQ: 0 ANSI: 5
[ 2.282376] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7250H 1.D2 PQ: 0 ANSI: 5
[ 2.286748] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.286793] sd 0:0:0:0: [sda] Write Protect is off
[ 2.286796] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.286828] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.286985] sda:sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.292532] Uniform CD-ROM driver Revision: 3.20
[ 2.292605] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.303386] sda1 sda2 < sda5 sda6 > sda3
[ 2.335235] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.337623] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.337646] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.352366] usb 6-3: new low speed USB device using ohci_hcd and address 2
[ 2.519084] usb 6-3: New USB device found, idVendor=17ef, idProduct=600e
[ 2.519087] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.519089] usb 6-3: Product: USB Optical Mouse
[ 2.519090] usb 6-3: Manufacturer: Logitech
[ 2.519146] usb 6-3: configuration #1 chosen from 1 choice
[ 2.526589] usbcore: registered new interface driver hiddev
[ 2.530215] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input2
[ 2.530259] generic-usb 0003:17EF:600E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-3/input0
[ 2.530278] usbcore: registered new interface driver usbhid
[ 2.530280] usbhid: v2.6:USB HID core driver
[ 2.702287] PM: Starting manual resume from disk
[ 2.702290] PM: Resume from partition 8:5
[ 2.702291] PM: Checking hibernation image.
[ 2.702444] PM: Error -22 checking image file
[ 2.702446] PM: Resume from disk failed.
[ 2.750427] kjournald starting. Commit interval 5 seconds
[ 2.750433] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.746041] udev[440]: starting version 164
[ 4.104582] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.104592] ACPI: Power Button [PWRB]
[ 4.104647] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.104649] ACPI: Power Button [PWRF]
[ 4.131069] processor LNXCPU:00: registered as cooling_device0
[ 4.131110] processor LNXCPU:01: registered as cooling_device1
[ 4.131136] processor LNXCPU:02: registered as cooling_device2
[ 4.131165] processor LNXCPU:03: registered as cooling_device3
[ 4.132582] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.175781] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.196919] EDAC MC: Ver: 2.1.0 Mar 7 2011
[ 4.198973] EDAC amd64_edac: Ver: 3.2.0 Mar 7 2011
[ 4.199034] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 4.199041] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.199042] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.199043] (Note that use of the override may cause unknown side effects.)
[ 4.199056] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 4.239350] [drm] Initialized drm 1.1.0 20060810
[ 4.641494] nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.641499] nouveau 0000:01:00.0: setting latency timer to 64
[ 4.643313] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8280b1)
[ 4.643924] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 4.716797] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 4.716799] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 4.716801] [drm] nouveau 0000:01:00.0: Bios version 70.18.2b.00
[ 4.716803] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[ 4.716860] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 4.716862] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 4.716865] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 4.716867] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[ 4.716869] [drm] nouveau 0000:01:00.0: 1: 0x00002161: type 0x61 idx 1 tag 0x08
[ 4.716871] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000000
[ 4.716873] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011362 00020010
[ 4.716875] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 0000000e 00000000
[ 4.716883] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD09B
[ 4.760018] [drm] nouveau 0000:01:00.0: 0xD3F1: Condition still not met after 20ms, skipping following opcodes
[ 4.784017] [drm] nouveau 0000:01:00.0: 0xD3F5: Condition still not met after 20ms, skipping following opcodes
[ 4.784036] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD5EC
[ 4.816016] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE10B
[ 4.816024] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE140
[ 4.865541] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE2F3
[ 4.865543] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE358
[ 4.888017] [drm] nouveau 0000:01:00.0: 0xE358: Condition still not met after 20ms, skipping following opcodes
[ 4.888024] [drm] nouveau 0000:01:00.0: 0xC00D: parsing output script 0
[ 4.997953] [TTM] Zone kernel: Available graphics memory: 2030630 kiB.
[ 4.997962] [drm] nouveau 0000:01:00.0: 512 MiB VRAM
[ 5.009939] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 5.012592] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 5.012596] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 5.012599] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 5.012641] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 5.222120] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x401a0000, bo ffff88013449a000
[ 5.230618] Console: switching to colour frame buffer device 180x56
[ 5.234154] fb0: nouveaufb frame buffer device
[ 5.234155] registered panic notifier
[ 5.234159] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 5.254601] [drm] nouveau 0000:01:00.0: 0x746A: parsing clock script 0
[ 5.259274] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.330895] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 5.332772] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 5.335199] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.335201] hda_intel: Disable MSI for Nvidia chipset
[ 5.335226] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 6.887377] Adding 7811064k swap on /dev/sda5. Priority:-1 extents:1 across:7811064k
[ 7.156978] EXT3 FS on sda1, internal journal
[ 7.237123] loop: module loaded
[ 8.047158] kjournald starting. Commit interval 5 seconds
[ 8.047531] EXT3 FS on sda6, internal journal
[ 8.047535] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.070119] kjournald starting. Commit interval 5 seconds
[ 8.070361] EXT3 FS on sda3, internal journal
[ 8.070365] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.970421] fuse init (API version 7.13)
[ 11.058896] sky2 eth0: enabling interface
[ 11.059352] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.504590] Bluetooth: Core ver 2.15
[ 13.504717] NET: Registered protocol family 31
[ 13.504719] Bluetooth: HCI device and connection manager initialized
[ 13.504722] Bluetooth: HCI socket layer initialized
[ 13.526601] Bluetooth: L2CAP ver 2.14
[ 13.526603] Bluetooth: L2CAP socket layer initialized
[ 13.529103] Bluetooth: RFCOMM TTY layer initialized
[ 13.529107] Bluetooth: RFCOMM socket layer initialized
[ 13.529108] Bluetooth: RFCOMM ver 1.11
[ 13.579250] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.579252] Bluetooth: BNEP filters: protocol multicast
[ 13.584769] Bridge firewalling registered
[ 13.789099] Bluetooth: SCO (Voice Link) ver 0.6
[ 13.789101] Bluetooth: SCO socket layer initialized
[ 14.100959] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 14.101436] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.733613] lp: driver loaded but no devices found
[ 14.753332] ppdev: user-space parallel port driver
[ 17.183769] powernow-k8: Found 1 AMD Phenom(tm) II X4 830 Processor processors (4 cpu cores) (version 2.20.00)
[ 17.183807] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 17.183808] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 17.183810] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 17.183811] powernow-k8: 3 : pstate 3 (800 MHz)
[ 20.737581] CPU0 attaching NULL sched-domain.
[ 20.737593] CPU1 attaching NULL sched-domain.
[ 20.737599] CPU2 attaching NULL sched-domain.
[ 20.737605] CPU3 attaching NULL sched-domain.
[ 20.772584] CPU0 attaching sched-domain:
[ 20.772594] domain 0: span 0-3 level MC
[ 20.772600] groups: 0 1 2 3
[ 20.772618] CPU1 attaching sched-domain:
[ 20.772623] domain 0: span 0-3 level MC
[ 20.772628] groups: 1 2 3 0
[ 20.772641] CPU2 attaching sched-domain:
[ 20.772646] domain 0: span 0-3 level MC
[ 20.772651] groups: 2 3 0 1
[ 20.772663] CPU3 attaching sched-domain:
[ 20.772667] domain 0: span 0-3 level MC
[ 20.772672] groups: 3 0 1 2
[ 177.416455] usb 6-3: USB disconnect, address 2
[ 178.973049] usb 6-3: new low speed USB device using ohci_hcd and address 3
[ 179.140155] usb 6-3: New USB device found, idVendor=17ef, idProduct=600e
[ 179.140164] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 179.140170] usb 6-3: Product: USB Optical Mouse
[ 179.140175] usb 6-3: Manufacturer: Logitech
[ 179.140354] usb 6-3: configuration #1 chosen from 1 choice
[ 179.147591] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input7
[ 179.147795] generic-usb 0003:17EF:600E.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-3/input0
[ 239.268680] usb 6-3: USB disconnect, address 3
[ 240.832388] usb 6-3: new low speed USB device using ohci_hcd and address 4
[ 241.004474] usb 6-3: New USB device found, idVendor=17ef, idProduct=600e
[ 241.004477] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 241.004479] usb 6-3: Product: USB Optical Mouse
[ 241.004480] usb 6-3: Manufacturer: Logitech
[ 241.004558] usb 6-3: configuration #1 chosen from 1 choice
[ 241.011933] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input8
[ 241.012155] generic-usb 0003:17EF:600E.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-3/input0
[ 301.073023] usb 6-3: USB disconnect, address 4
[ 302.672045] usb 6-3: new low speed USB device using ohci_hcd and address 5
[ 302.843148] usb 6-3: New USB device found, idVendor=17ef, idProduct=600e
[ 302.843157] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 302.843164] usb 6-3: Product: USB Optical Mouse
[ 302.843169] usb 6-3: Manufacturer: Logitech
[ 302.843488] usb 6-3: configuration #1 chosen from 1 choice
[ 302.850582] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input9
[ 302.850792] generic-usb 0003:17EF:600E.0004: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-3/input0
[ 361.692367] INFO: task kjournald:394 blocked for more than 120 seconds.
[ 361.693693] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 361.695268] kjournald D ffff88000544fb30 0 394 2 0x00000000
[ 361.695274] ffff880137a5b880 0000000000000046 ffff8801336e7a70 ffff8801336e7a6c
[ 361.695279] ffff880137c03d80 0000000000000282 000000000000f9e0 ffff8801336e7fd8
[ 361.695284] 0000000000015780 0000000000015780 ffff880134fde9f0 ffff880134fdece8
[ 361.695288] Call Trace:
[ 361.695298] [] ? io_schedule+0x73/0xb7
[ 361.695304] [] ? get_request_wait+0xf0/0x188
[ 361.695309] [] ? autoremove_wake_function+0x0/0x2e
[ 361.695314] [] ? __make_request+0x2f7/0x428
[ 361.695318] [] ? alloc_buffer_head+0x11/0x42
[ 361.695323] [] ? generic_make_request+0x299/0x2f9
[ 361.695328] [] ? __wake_up_common+0x44/0x72
[ 361.695331] [] ? submit_bio+0xd6/0xf2
[ 361.695335] [] ? submit_bh+0x103/0x123
[ 361.695339] [] ? ll_rw_block+0xb4/0xf8
[ 361.695354] [] ? flush_descriptor+0x59/0x5e [jbd]
[ 361.695361] [] ? journal_commit_transaction+0x674/0xe2b [jbd]
[ 361.695366] [] ? autoremove_wake_function+0x0/0x2e
[ 361.695371] [] ? lock_timer_base+0x26/0x4b
[ 361.695377] [] ? kjournald+0xdf/0x226 [jbd]
[ 361.695381] [] ? autoremove_wake_function+0x0/0x2e
[ 361.695387] [] ? kjournald+0x0/0x226 [jbd]
[ 361.695390] [] ? kthread+0x79/0x81
[ 361.695395] [] ? child_rip+0xa/0x20
[ 361.695398] [] ? kthread+0x0/0x81
[ 361.695401] [] ? child_rip+0x0/0x20
[ 361.695406] INFO: task flush-8:0:709 blocked for more than 120 seconds.
[ 361.697042] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 361.698453] flush-8:0 D ffff88013362f920 0 709 2 0x00000000
[ 361.698458] ffff880137b44db0 0000000000000046 0000000000000282 ffff88000000edc0
[ 361.698463] ffff880133cf3880 0000000000000000 000000000000f9e0 ffff88013362ffd8
[ 361.698467] 0000000000015780 0000000000015780 ffff880133cf3880 ffff880133cf3b78
[ 361.698471] Call Trace:
[ 361.698477] [] ? cfq_may_queue+0x59/0xd7
[ 361.698482] [] ? read_tsc+0xa/0x20
[ 361.698486] [] ? get_request+0x7e/0x2ba
[ 361.698489] [] ? io_schedule+0x73/0xb7
[ 361.698493] [] ? get_request_wait+0xf0/0x188
[ 361.698497] [] ? autoremove_wake_function+0x0/0x2e
[ 361.698501] [] ? __make_request+0x2f7/0x428
[ 361.698505] [] ? generic_make_request+0x299/0x2f9
[ 361.698510] [] ? submit_bio+0xd6/0xf2
[ 361.698513] [] ? submit_bh+0x103/0x123
[ 361.698518] [] ? __block_write_full_page+0x1d6/0x2ac
[ 361.698522] [] ? end_buffer_async_write+0x0/0x13b
[ 361.698527] [] ? __writepage+0xa/0x25
[ 361.698530] [] ? write_cache_pages+0x20b/0x327
[ 361.698534] [] ? __writepage+0x0/0x25
[ 361.698540] [] ? writeback_single_inode+0xe7/0x2da
[ 361.698545] [] ? writeback_inodes_wb+0x424/0x4ff
[ 361.698550] [] ? wb_writeback+0x12c/0x1ab
[ 361.698554] [] ? wb_do_writeback+0x73/0x165
[ 361.698559] [] ? bdi_writeback_task+0x31/0xaa
[ 361.698564] [] ? bdi_start_fn+0x0/0xd2
[ 361.698568] [] ? bdi_start_fn+0x70/0xd2
[ 361.698572] [] ? bdi_start_fn+0x0/0xd2
[ 361.698575] [] ? kthread+0x79/0x81
[ 361.698579] [] ? child_rip+0xa/0x20
[ 361.698582] [] ? kthread+0x0/0x81
[ 361.698585] [] ? child_rip+0x0/0x20
[ 361.698592] INFO: task Xorg:1279 blocked for more than 120 seconds.
[ 361.700248] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 361.701989] Xorg D ffff880135ae56f8 0 1279 1277 0x00400000
[ 361.702000] ffff880137b40000 0000000000000086 0000000000000296 ffff88000000edc0
[ 361.702014] ffff880133cf0710 0000000000000000 000000000000f9e0 ffff880135ae5fd8
[ 361.702027] 0000000000015780 0000000000015780 ffff880133cf0710 ffff880133cf0a08
[ 361.702041] Call Trace:
[ 361.702049] [] ? cfq_may_queue+0x59/0xd7
[ 361.702057] [] ? read_tsc+0xa/0x20
[ 361.702065] [] ? get_request+0x7e/0x2ba
[ 361.702072] [] ? io_schedule+0x73/0xb7
[ 361.702080] [] ? get_request_wait+0xf0/0x188
[ 361.702087] [] ? autoremove_wake_function+0x0/0x2e
[ 361.702100] [] ? __make_request+0x2f7/0x428
[ 361.702108] [] ? generic_make_request+0x299/0x2f9
[ 361.702117] [] ? cfq_set_request+0x2af/0x319
[ 361.702124] [] ? common_interrupt+0xe/0x13
[ 361.702132] [] ? submit_bio+0xd6/0xf2
[ 361.702140] [] ? submit_bh+0x103/0x123
[ 361.702147] [] ? __block_write_full_page+0x1d6/0x2ac
[ 361.702155] [] ? end_buffer_async_write+0x0/0x13b
[ 361.702163] [] ? __writepage+0xa/0x25
[ 361.702170] [] ? write_cache_pages+0x20b/0x327
[ 361.702178] [] ? read_tsc+0xa/0x20
[ 361.702185] [] ? __writepage+0x0/0x25
[ 361.702193] [] ? writeback_single_inode+0xe7/0x2da
[ 361.702201] [] ? writeback_inodes_wb+0x424/0x4ff
[ 361.702210] [] ? balance_dirty_pages_ratelimited_nr+0x192/0x332
[ 361.702219] [] ? generic_file_buffered_write+0x1f5/0x278
[ 361.702230] [] ? __generic_file_aio_write+0x25f/0x293
[ 361.702239] [] ? vsnprintf+0x9e/0x449
[ 361.702247] [] ? generic_file_aio_write+0x59/0x9f
[ 361.702256] [] ? do_sync_write+0xce/0x113
[ 361.702264] [] ? cp_new_stat+0xe9/0xfc
[ 361.702271] [] ? autoremove_wake_function+0x0/0x2e
[ 361.702280] [] ? vfs_write+0xa9/0x102
[ 361.702287] [] ? sys_write+0x45/0x6e
[ 361.702294] [] ? system_call_fastpath+0x16/0x1b
[ 361.702317] INFO: task dbench:2248 blocked for more than 120 seconds.
[ 361.703955] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 361.705761] dbench D ffff88011f34e9f0 0 2248 2246 0x00000000
[ 361.705766] ffff88011f34e9f0 0000000000000086 ffff88013574fd58 ffff88013574fd54
[ 361.705770] ffff8801205df350 ffff8801204366c0 000000000000f9e0 ffff88013574ffd8
[ 361.705775] 0000000000015780 0000000000015780 ffff880136acf810 ffff880136acfb08
[ 361.705779] Call Trace:
[ 361.705787] [] ? start_this_handle+0x2b9/0x344 [jbd]
[ 361.705791] [] ? autoremove_wake_function+0x0/0x2e
[ 361.705798] [] ? journal_start+0x96/0xc6 [jbd]
[ 361.705810] [] ? ext3_unlink+0x43/0x1b4 [ext3]
[ 361.705819] [] ? may_delete+0x45/0x112
[ 361.705826] [] ? vfs_unlink+0x72/0xa6
[ 361.705834] [] ? do_unlinkat+0xc2/0x149
[ 361.705842] [] ? do_page_fault+0x2e0/0x2fc
[ 361.705850] [] ? page_fault+0x25/0x30
[ 361.705857] [] ? system_call_fastpath+0x16/0x1b
[ 361.705863] INFO: task dbench:2251 blocked for more than 120 seconds.
[ 361.707391] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 361.709255] dbench D 0000000000000000 0 2251 2246 0x00000000
[ 361.709259] ffff880137a5f100 0000000000000082 0000000000000000 0000000000000002
[ 361.709264] ffff880120420d90 0000000000000000 000000000000f9e0 ffff880121041fd8
[ 361.709267] 0000000000015780 0000000000015780 ffff880136acb170 ffff880136acb468
[ 361.709271] Call Trace:
[ 361.709276] [] ? get_request+0x7e/0x2ba
[ 361.709280] [] ? io_schedule+0x73/0xb7
[ 361.709284] [] ? get_request_wait+0xf0/0x188
[ 361.709288] [] ? autoremove_wake_function+0x0/0x2e
[ 361.709292] [] ? __make_request+0x2f7/0x428
[ 361.709300] [] ? generic_make_request+0x299/0x2f9
[ 361.709315] [] ? __ext3_journal_dirty_metadata+0x1e/0x46 [ext3]
[ 361.709323] [] ? submit_bio+0xd6/0xf2
[ 361.709330] [] ? submit_bh+0x103/0x123
[ 361.709338] [] ? __block_write_full_page+0x1d6/0x2ac
[ 361.709345] [] ? end_buffer_async_write+0x0/0x13b
[ 361.709353] [] ? __writepage+0xa/0x25
[ 361.709360] [] ? write_cache_pages+0x20b/0x327
[ 361.709368] [] ? __writepage+0x0/0x25
[ 361.709376] [] ? writeback_single_inode+0xe7/0x2da
[ 361.709384] [] ? writeback_inodes_wb+0x424/0x4ff
[ 361.709393] [] ? balance_dirty_pages_ratelimited_nr+0x192/0x332
[ 361.709402] [] ? generic_file_buffered_write+0x1f5/0x278
[ 361.709412] [] ? __generic_file_aio_write+0x25f/0x293
[ 361.709421] [] ? generic_file_aio_write+0x59/0x9f
[ 361.709428] [] ? do_sync_write+0xce/0x113
[ 361.709435] [] ? autoremove_wake_function+0x0/0x2e
[ 361.709443] [] ? handle_mm_fault+0x35c/0x80f
[ 361.709451] [] ? group_send_sig_info+0x11/0x34
[ 361.709458] [] ? sys_kill+0x72/0x140
[ 361.709465] [] ? vfs_write+0xa9/0x102
[ 361.709473] [] ? sys_pwrite64+0x57/0x77
[ 361.709480] [] ? page_fault+0x25/0x30
[ 361.709488] [] ? system_call_fastpath+0x16/0x1b
[ 361.709493] INFO: task dbench:2252 blocked for more than 120 seconds.
[ 361.711071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 361.712970] dbench D ffff88011e8adbd0 0 2252 2246 0x00000000
[ 361.712979] ffff88011e8adbd0 0000000000000086 ffff88012065dc00 ffff88012065dc00
[ 361.712993] ffff880120487cc8 ffff8801204ea6c0 000000000000f9e0 ffff88012100dfd8
[ 361.713011] 0000000000015780 0000000000015780 ffff880136ac9530 ffff880136ac9828
[ 361.713024] Call Trace:
[ 361.713032] [] ? __d_lookup+0xc3/0x107
[ 361.713044] [] ? start_this_handle+0x2b9/0x344 [jbd]
[ 361.713052] [] ? autoremove_wake_function+0x0/0x2e
[ 361.713062] [] ? journal_start+0x96/0xc6 [jbd]
[ 361.713073] [] ? ext3_unlink+0x43/0x1b4 [ext3]
[ 361.713080] [] ? may_delete+0x45/0x112
[ 361.713088] [] ? vfs_unlink+0x72/0xa6
[ 361.713095] [] ? do_unlinkat+0xc2/0x149
[ 361.713102] [] ? sys_newstat+0x23/0x30
[ 361.713109] [] ? system_call_fastpath+0x16/0x1b
[ 361.713115] INFO: task dbench:2253 blocked for more than 120 seconds.
[ 361.714737] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 361.716407] dbench D ffff88011f5c3f90 0 2253 2246 0x00000000
[ 361.716412] ffff88011f5c3f90 0000000000000082 ffff880121091d58 ffff880121091d54
[ 361.716417] ffff8801205e5098 ffff8801204cde40 000000000000f9e0 ffff880121091fd8
[ 361.716431] 0000000000015780 0000000000015780 ffff880136ac9c40 ffff880136ac9f38
[ 361.716444] Call Trace:
[ 361.716455] [] ? start_this_handle+0x2b9/0x344 [jbd]
[ 361.716463] [] ? autoremove_wake_function+0x0/0x2e
[ 361.716473] [] ? journal_start+0x96/0xc6 [jbd]
[ 361.716484] [] ? ext3_unlink+0x43/0x1b4 [ext3]
[ 361.716491] [] ? may_delete+0x45/0x112
[ 361.716498] [] ? vfs_unlink+0x72/0xa6
[ 361.716506] [] ? do_unlinkat+0xc2/0x149
[ 361.716514] [] ? do_page_fault+0x2e0/0x2fc
[ 361.716521] [] ? page_fault+0x25/0x30
[ 361.716529] [] ? system_call_fastpath+0x16/0x1b
[ 361.716534] INFO: task dbench:2254 blocked for more than 120 seconds.
[ 361.718525] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 361.720576] dbench D ffff88011eca5bd0 0 2254 2246 0x00000000
[ 361.720581] ffff88011eca5bd0 0000000000000086 ffff88012065d180 ffff88012065d180
[ 361.720585] ffff88012048b678 ffff8801204cc900 000000000000f9e0 ffff880134689fd8
[ 361.720599] 0000000000015780 0000000000015780 ffff880136acb880 ffff880136acbb78
[ 361.720612] Call Trace:
[ 361.720619] [] ? __d_lookup+0xc3/0x107
[ 361.720630] [] ? start_this_handle+0x2b9/0x344 [jbd]
[ 361.720638] [] ? autoremove_wake_function+0x0/0x2e
[ 361.720648] [] ? journal_start+0x96/0xc6 [jbd]
[ 361.720659] [] ? ext3_unlink+0x43/0x1b4 [ext3]
[ 361.720666] [] ? may_delete+0x45/0x112
[ 361.720671] [] ? vfs_unlink+0x72/0xa6
[ 361.720675] [] ? do_unlinkat+0xc2/0x149
[ 361.720679] [] ? sys_newstat+0x23/0x30
[ 361.720683] [] ? system_call_fastpath+0x16/0x1b
[ 361.720688] INFO: task dbench:2255 blocked for more than 120 seconds.
[ 361.722444] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 361.724232] dbench D ffff88011ee19530 0 2255 2246 0x00000000
[ 361.724237] ffff88011ee19530 0000000000000082 ffff880121085d58 ffff880121085d54
[ 361.724241] ffff8801204a16e8 ffff880120421d80 000000000000f9e0 ffff880121085fd8
[ 361.724245] 0000000000015780 0000000000015780 ffff880136acaa60 ffff880136acad58
[ 361.724249] Call Trace:
[ 361.724257] [] ? start_this_handle+0x2b9/0x344 [jbd]
[ 361.724261] [] ? autoremove_wake_function+0x0/0x2e
[ 361.724268] [] ? journal_start+0x96/0xc6 [jbd]
[ 361.724275] [] ? ext3_unlink+0x43/0x1b4 [ext3]
[ 361.724279] [] ? may_delete+0x45/0x112
[ 361.724283] [] ? vfs_unlink+0x72/0xa6
[ 361.724286] [] ? do_unlinkat+0xc2/0x149
[ 361.724290] [] ? sys_newstat+0x23/0x30
[ 361.724294] [] ? system_call_fastpath+0x16/0x1b
[ 361.724297] INFO: task dbench:2256 blocked for more than 120 seconds.
[ 361.726456] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 361.728637] dbench D ffff88013575b6f8 0 2256 2246 0x00000000
[ 361.728641] ffff880137b44db0 0000000000000086 0000000000000296 ffff88000000edc0
[ 361.728645] ffff880136acbf90 0000000000000000 000000000000f9e0 ffff88013575bfd8
[ 361.728660] 0000000000015780 0000000000015780 ffff880136acbf90 ffff880136acc288
[ 361.728668] Call Trace:
[ 361.728673] [] ? cfq_may_queue+0x59/0xd7
[ 361.728677] [] ? read_tsc+0xa/0x20
[ 361.728681] [] ? get_request+0x7e/0x2ba
[ 361.728685] [] ? io_schedule+0x73/0xb7
[ 361.728689] [] ? get_request_wait+0xf0/0x188
[ 361.728693] [] ? autoremove_wake_function+0x0/0x2e
[ 361.728697] [] ? __make_request+0x2f7/0x428
[ 361.728704] [] ? generic_make_request+0x299/0x2f9
[ 361.728717] [] ? __ext3_journal_dirty_metadata+0x1e/0x46 [ext3]
[ 361.728725] [] ? apic_timer_interrupt+0xe/0x20
[ 361.728733] [] ? submit_bio+0xd6/0xf2
[ 361.728741] [] ? submit_bh+0x103/0x123
[ 361.728748] [] ? __block_write_full_page+0x1d6/0x2ac
[ 361.728756] [] ? end_buffer_async_write+0x0/0x13b
[ 361.728764] [] ? __writepage+0xa/0x25
[ 361.728771] [] ? write_cache_pages+0x20b/0x327
[ 361.728778] [] ? __writepage+0x0/0x25
[ 361.728787] [] ? writeback_single_inode+0xe7/0x2da
[ 361.728795] [] ? writeback_inodes_wb+0x424/0x4ff
[ 361.728803] [] ? balance_dirty_pages_ratelimited_nr+0x192/0x332
[ 361.728813] [] ? generic_file_buffered_write+0x1f5/0x278
[ 361.728822] [] ? __generic_file_aio_write+0x25f/0x293
[ 361.728831] [] ? generic_file_aio_write+0x59/0x9f
[ 361.728839] [] ? do_sync_write+0xce/0x113
[ 361.728846] [] ? autoremove_wake_function+0x0/0x2e
[ 361.728854] [] ? handle_mm_fault+0x35c/0x80f
[ 361.728861] [] ? group_send_sig_info+0x11/0x34
[ 361.728868] [] ? sys_kill+0x72/0x140
[ 361.728875] [] ? vfs_write+0xa9/0x102
[ 361.728882] [] ? sys_pwrite64+0x57/0x77
[ 361.728890] [] ? page_fault+0x25/0x30
[ 361.728897] [] ? system_call_fastpath+0x16/0x1b
[ 362.930670] usb 6-3: USB disconnect, address 5
[ 364.524399] usb 6-3: new low speed USB device using ohci_hcd and address 6
[ 364.696165] usb 6-3: New USB device found, idVendor=17ef, idProduct=600e
[ 364.696174] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 364.696180] usb 6-3: Product: USB Optical Mouse
[ 364.696185] usb 6-3: Manufacturer: Logitech
[ 364.696366] usb 6-3: configuration #1 chosen from 1 choice
[ 364.703675] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input10
[ 364.703940] generic-usb 0003:17EF:600E.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-3/input0
[ 424.771680] usb 6-3: USB disconnect, address 6
[ 426.332062] usb 6-3: new low speed USB device using ohci_hcd and address 7
[ 426.504150] usb 6-3: New USB device found, idVendor=17ef, idProduct=600e
[ 426.504159] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 426.504166] usb 6-3: Product: USB Optical Mouse
[ 426.504170] usb 6-3: Manufacturer: Logitech
[ 426.504347] usb 6-3: configuration #1 chosen from 1 choice
[ 426.511580] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input11
[ 426.511802] generic-usb 0003:17EF:600E.0006: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-3/input0
[ 6147.279083] usb 6-3: USB disconnect, address 7
[ 6148.836059] usb 6-3: new low speed USB device using ohci_hcd and address 8
[ 6149.003153] usb 6-3: New USB device found, idVendor=17ef, idProduct=600e
[ 6149.003161] usb 6-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6149.003168] usb 6-3: Product: USB Optical Mouse
[ 6149.003172] usb 6-3: Manufacturer: Logitech
[ 6149.003331] usb 6-3: configuration #1 chosen from 1 choice
[ 6149.010567] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.0/input/input12
[ 6149.010763] generic-usb 0003:17EF:600E.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-3/input0