Xorg.0.log - kencc-compilation:default

Return To kencc-compilation:default System Information

[    19.842] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at .
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See  for git access instructions.
[    19.849] 
X.Org X Server 1.9.4.901 (1.9.5 RC 1)
Release Date: 2011-03-04
[    19.849] X Protocol Version 11, Revision 0
[    19.849] Build Operating System: Linux 2.6.37-ARCH i686 
[    19.849] Current Operating System: Linux Buffalobill 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 15 11:40:49 UTC 2011 i686
[    19.849] Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda2 ro
[    19.849] Build Date: 14 March 2011  10:39:42AM
[    19.849]  
[    19.857] Current version of pixman: 0.20.2
[    19.857] 	Before reporting problems, check 
	to make sure that you have the latest version.
[    19.857] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.857] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 25 07:18:19 2011
[    19.859] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    19.910] (==) No Layout section.  Using the first Screen section.
[    19.910] (==) No screen section available. Using defaults.
[    19.910] (**) |-->Screen "Default Screen Section" (0)
[    19.910] (**) |   |-->Monitor ""
[    19.910] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    19.910] (**) |   |-->Device "n"
[    19.910] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    19.910] (==) Automatically adding devices
[    19.910] (==) Automatically enabling devices
[    19.911] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    19.911] 	Entry deleted from font path.
[    19.911] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    19.911] 	Entry deleted from font path.
[    19.911] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    19.911] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    19.911] 	Entry deleted from font path.
[    19.911] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    19.911] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    19.911] (==) ModulePath set to "/usr/lib/xorg/modules"
[    19.911] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    19.911] (II) Loader magic: 0x81f3280
[    19.911] (II) Module ABI versions:
[    19.911] 	X.Org ANSI C Emulation: 0.4
[    19.911] 	X.Org Video Driver: 8.0
[    19.911] 	X.Org XInput driver : 11.0
[    19.911] 	X.Org Server Extension : 4.0
[    19.914] (--) PCI:*(0:1:0:0) 10de:0407:14c0:0025 rev 161, Mem @ 0xc6000000/16777216, 0xd0000000/268435456, 0xc4000000/33554432, I/O @ 0x00002000/128
[    19.914] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    19.914] (II) LoadModule: "extmod"
[    19.914] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    19.927] (II) Module extmod: vendor="X.Org Foundation"
[    19.927] 	compiled for 1.9.4.901, module version = 1.0.0
[    19.927] 	Module class: X.Org Server Extension
[    19.927] 	ABI class: X.Org Server Extension, version 4.0
[    19.927] (II) Loading extension MIT-SCREEN-SAVER
[    19.927] (II) Loading extension XFree86-VidModeExtension
[    19.927] (II) Loading extension XFree86-DGA
[    19.928] (II) Loading extension DPMS
[    19.928] (II) Loading extension XVideo
[    19.928] (II) Loading extension XVideo-MotionCompensation
[    19.928] (II) Loading extension X-Resource
[    19.928] (II) LoadModule: "dbe"
[    19.928] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    19.937] (II) Module dbe: vendor="X.Org Foundation"
[    19.937] 	compiled for 1.9.4.901, module version = 1.0.0
[    19.937] 	Module class: X.Org Server Extension
[    19.937] 	ABI class: X.Org Server Extension, version 4.0
[    19.937] (II) Loading extension DOUBLE-BUFFER
[    19.937] (II) LoadModule: "glx"
[    19.937] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    19.957] (II) Module glx: vendor="X.Org Foundation"
[    19.957] 	compiled for 1.9.4.901, module version = 1.0.0
[    19.957] 	ABI class: X.Org Server Extension, version 4.0
[    19.958] (==) AIGLX enabled
[    19.958] (II) Loading extension GLX
[    19.958] (II) LoadModule: "record"
[    19.959] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    19.971] (II) Module record: vendor="X.Org Foundation"
[    19.971] 	compiled for 1.9.4.901, module version = 1.13.0
[    19.971] 	Module class: X.Org Server Extension
[    19.971] 	ABI class: X.Org Server Extension, version 4.0
[    19.971] (II) Loading extension RECORD
[    19.971] (II) LoadModule: "dri"
[    19.971] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    19.983] (II) Module dri: vendor="X.Org Foundation"
[    19.983] 	compiled for 1.9.4.901, module version = 1.0.0
[    19.983] 	ABI class: X.Org Server Extension, version 4.0
[    19.983] (II) Loading extension XFree86-DRI
[    19.983] (II) LoadModule: "dri2"
[    19.983] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    19.984] (II) Module dri2: vendor="X.Org Foundation"
[    19.984] 	compiled for 1.9.4.901, module version = 1.2.0
[    19.984] 	ABI class: X.Org Server Extension, version 4.0
[    19.984] (II) Loading extension DRI2
[    19.984] (II) LoadModule: "nouveau"
[    20.004] (II) Module nouveau: vendor="X.Org Foundation"
[    20.004] 	compiled for 1.9.2, module version = 0.0.16
[    20.004] 	Module class: X.Org Video Driver
[    20.004] 	ABI class: X.Org Video Driver, version 8.0
[    20.004] (II) NOUVEAU driver 
[    20.004] (II) NOUVEAU driver for NVIDIA chipset families :
[    20.004] 	RIVA TNT    (NV04)
[    20.004] 	RIVA TNT2   (NV05)
[    20.004] 	GeForce 256 (NV10)
[    20.004] 	GeForce 2   (NV11, NV15)
[    20.004] 	GeForce 4MX (NV17, NV18)
[    20.004] 	GeForce 3   (NV20)
[    20.004] 	GeForce 4Ti (NV25, NV28)
[    20.004] 	GeForce FX  (NV3x)
[    20.004] 	GeForce 6   (NV4x)
[    20.004] 	GeForce 7   (G7x)
[    20.004] 	GeForce 8   (G8x)
[    20.004] (++) using VT number 7

[    20.006] drmOpenDevice: node name is /dev/dri/card0
[    20.006] drmOpenDevice: open result is 7, (OK)
[    20.006] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    20.006] drmOpenDevice: node name is /dev/dri/card0
[    20.006] drmOpenDevice: open result is 7, (OK)
[    20.006] drmOpenByBusid: drmOpenMinor returns 7
[    20.006] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    20.006] (II) [drm] nouveau interface version: 0.0.16
[    20.007] (II) Loading sub module "dri"
[    20.007] (II) LoadModule: "dri"
[    20.007] (II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
[    20.007] (II) NOUVEAU(0): Loaded DRI module
[    20.007] drmOpenDevice: node name is /dev/dri/card0
[    20.007] drmOpenDevice: open result is 8, (OK)
[    20.007] drmOpenDevice: node name is /dev/dri/card0
[    20.007] drmOpenDevice: open result is 8, (OK)
[    20.007] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[    20.007] drmOpenDevice: node name is /dev/dri/card0
[    20.007] drmOpenDevice: open result is 8, (OK)
[    20.007] drmOpenByBusid: drmOpenMinor returns 8
[    20.007] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[    20.007] (II) [drm] DRM interface version 1.4
[    20.007] (II) [drm] DRM open master succeeded.
[    20.007] (--) NOUVEAU(0): Chipset: "NVIDIA NV84"
[    20.007] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    20.007] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    20.007] (==) NOUVEAU(0): RGB weight 888
[    20.007] (==) NOUVEAU(0): Default visual is TrueColor
[    20.007] (==) NOUVEAU(0): Using HW cursor
[    20.007] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[    20.125] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[    20.223] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[    20.336] (II) NOUVEAU(0): EDID for output LVDS-1
[    20.336] (II) NOUVEAU(0): Manufacturer: CPT  Model: 1401  Serial#: 0
[    20.336] (II) NOUVEAU(0): Year: 2007  Week: 51
[    20.336] (II) NOUVEAU(0): EDID Version: 1.3
[    20.336] (II) NOUVEAU(0): Digital Display Input
[    20.336] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[    20.336] (II) NOUVEAU(0): Gamma: 2.20
[    20.336] (II) NOUVEAU(0): No DPMS capabilities specified
[    20.336] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    20.336] (II) NOUVEAU(0): First detailed timing is preferred mode
[    20.336] (II) NOUVEAU(0): redX: 0.595 redY: 0.343   greenX: 0.317 greenY: 0.559
[    20.336] (II) NOUVEAU(0): blueX: 0.156 blueY: 0.132   whiteX: 0.315 whiteY: 0.329
[    20.336] (II) NOUVEAU(0): Manufacturer's mask: 0
[    20.336] (II) NOUVEAU(0): Supported detailed timing:
[    20.336] (II) NOUVEAU(0): clock: 68.9 MHz   Image Size:  331 x 207 mm
[    20.336] (II) NOUVEAU(0): h_active: 1280  h_sync: 1312  h_sync_end 1344 h_blank_end 1408 h_border: 0
[    20.336] (II) NOUVEAU(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 816 v_border: 0
[    20.336] (II) NOUVEAU(0): Unknown vendor-specific block f
[    20.336] (II) NOUVEAU(0):  CPT
[    20.336] (II) NOUVEAU(0):  CLAA154WB03A
[    20.336] (II) NOUVEAU(0): EDID (in hex):
[    20.336] (II) NOUVEAU(0): 	00ffffffffffff000e14011400000000
[    20.336] (II) NOUVEAU(0): 	33110103802115780a743d9857518f28
[    20.337] (II) NOUVEAU(0): 	21505400000001010101010101010101
[    20.337] (II) NOUVEAU(0): 	010101010101ea1a0080502010302020
[    20.337] (II) NOUVEAU(0): 	13004bcf100000190000000f00202020
[    20.337] (II) NOUVEAU(0): 	2020202020206e050f00000000fe0043
[    20.337] (II) NOUVEAU(0): 	50540a202020202020202020000000fe
[    20.337] (II) NOUVEAU(0): 	00434c41413135345742303341200042
[    20.337] (II) NOUVEAU(0): EDID vendor "CPT", prod id 5121
[    20.337] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    20.337] (II) NOUVEAU(0): Modeline "1280x800"x0.0   68.90  1280 1312 1344 1408  800 801 804 816 -hsync -vsync (48.9 kHz)
[    20.337] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[    20.337] (II) NOUVEAU(0): Modeline "1280x800"x60.0   68.90  1280 1312 1344 1408  800 801 804 816 -hsync -vsync (48.9 kHz)
[    20.337] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    20.337] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    20.337] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    20.337] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz)
[    20.337] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
[    20.337] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
[    20.435] (II) NOUVEAU(0): EDID for output VGA-1
[    20.435] (II) NOUVEAU(0): Output LVDS-1 connected
[    20.435] (II) NOUVEAU(0): Output VGA-1 disconnected
[    20.435] (II) NOUVEAU(0): Using exact sizes for initial modes
[    20.435] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1280x800
[    20.435] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    20.435] (--) NOUVEAU(0): Virtual size is 1280x800 (pitch 0)
[    20.435] (**) NOUVEAU(0):  Driver mode "1280x800": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
[    20.435] (II) NOUVEAU(0): Modeline "1280x800"x60.0   68.90  1280 1312 1344 1408  800 801 804 816 -hsync -vsync (48.9 kHz)
[    20.435] (**) NOUVEAU(0):  Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[    20.435] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    20.435] (**) NOUVEAU(0):  Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[    20.435] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    20.435] (**) NOUVEAU(0):  Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[    20.435] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    20.435] (**) NOUVEAU(0):  Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[    20.435] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz)
[    20.435] (**) NOUVEAU(0):  Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[    20.435] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
[    20.435] (**) NOUVEAU(0):  Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[    20.435] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
[    20.435] (**) NOUVEAU(0): Display dimensions: (330, 210) mm
[    20.435] (**) NOUVEAU(0): DPI set to (98, 96)
[    20.436] (II) Loading sub module "fb"
[    20.436] (II) LoadModule: "fb"
[    20.436] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.456] (II) Module fb: vendor="X.Org Foundation"
[    20.456] 	compiled for 1.9.4.901, module version = 1.0.0
[    20.456] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.456] (II) Loading sub module "exa"
[    20.456] (II) LoadModule: "exa"
[    20.456] (II) Loading /usr/lib/xorg/modules/libexa.so
[    20.458] (II) Module exa: vendor="X.Org Foundation"
[    20.458] 	compiled for 1.9.4.901, module version = 2.5.0
[    20.458] 	ABI class: X.Org Video Driver, version 8.0
[    20.458] (II) Loading sub module "shadowfb"
[    20.458] (II) LoadModule: "shadowfb"
[    20.458] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    20.466] (II) Module shadowfb: vendor="X.Org Foundation"
[    20.466] 	compiled for 1.9.4.901, module version = 1.0.0
[    20.466] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.466] (--) Depth 24 pixmap format is 32 bpp
[    20.476] (II) NOUVEAU(0): Opened GPU channel 2
[    20.477] (II) NOUVEAU(0): [DRI2] Setup complete
[    20.477] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    20.477] (II) NOUVEAU(0): GART: 512MiB available
[    20.479] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[    20.494] (II) EXA(0): Driver allocated offscreen pixmaps
[    20.494] (II) EXA(0): Driver registered support for the following operations:
[    20.494] (II)         Solid
[    20.494] (II)         Copy
[    20.494] (II)         Composite (RENDER acceleration)
[    20.494] (II)         UploadToScreen
[    20.494] (II)         DownloadFromScreen
[    20.494] (==) NOUVEAU(0): Backing store disabled
[    20.494] (==) NOUVEAU(0): Silken mouse enabled
[    20.495] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[    20.495] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    20.495] (==) NOUVEAU(0): DPMS enabled
[    20.495] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    20.495] (--) RandR disabled
[    20.495] (II) Initializing built-in extension Generic Event Extension
[    20.495] (II) Initializing built-in extension SHAPE
[    20.495] (II) Initializing built-in extension MIT-SHM
[    20.495] (II) Initializing built-in extension XInputExtension
[    20.495] (II) Initializing built-in extension XTEST
[    20.495] (II) Initializing built-in extension BIG-REQUESTS
[    20.496] (II) Initializing built-in extension SYNC
[    20.496] (II) Initializing built-in extension XKEYBOARD
[    20.496] (II) Initializing built-in extension XC-MISC
[    20.496] (II) Initializing built-in extension SECURITY
[    20.496] (II) Initializing built-in extension XINERAMA
[    20.496] (II) Initializing built-in extension XFIXES
[    20.496] (II) Initializing built-in extension RENDER
[    20.496] (II) Initializing built-in extension RANDR
[    20.496] (II) Initializing built-in extension COMPOSITE
[    20.496] (II) Initializing built-in extension DAMAGE
[    20.759] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    20.759] (II) AIGLX: enabled GLX_INTEL_swap_event
[    20.759] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    20.759] (II) AIGLX: enabled GLX_SGI_make_current_read
[    20.759] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    20.759] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/nouveau_dri.so
[    20.759] (II) GLX: Initialized DRI2 GL provider for screen 0
[    20.763] (II) NOUVEAU(0): NVEnterVT is called.
[    20.763] (II) NOUVEAU(0): Setting screen physical size to 338 x 211
[    20.763] resize called 1280 800
[    21.085] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    21.085] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.085] (II) LoadModule: "evdev"
[    21.085] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    21.203] (II) Module evdev: vendor="X.Org Foundation"
[    21.203] 	compiled for 1.9.4, module version = 2.6.0
[    21.203] 	Module class: X.Org XInput Driver
[    21.203] 	ABI class: X.Org XInput driver, version 11.0
[    21.203] (**) Power Button: always reports core events
[    21.203] (**) Power Button: Device: "/dev/input/event3"
[    21.216] (--) Power Button: Found keys
[    21.216] (II) Power Button: Configuring as keyboard
[    21.216] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    21.216] (**) Option "xkb_rules" "evdev"
[    21.216] (**) Option "xkb_model" "evdev"
[    21.216] (**) Option "xkb_layout" "us"
[    21.251] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    21.251] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    21.251] (**) Video Bus: always reports core events
[    21.251] (**) Video Bus: Device: "/dev/input/event4"
[    21.260] (--) Video Bus: Found keys
[    21.260] (II) Video Bus: Configuring as keyboard
[    21.260] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    21.260] (**) Option "xkb_rules" "evdev"
[    21.260] (**) Option "xkb_model" "evdev"
[    21.260] (**) Option "xkb_layout" "us"
[    21.267] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    21.267] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.267] (**) Power Button: always reports core events
[    21.267] (**) Power Button: Device: "/dev/input/event2"
[    21.276] (--) Power Button: Found keys
[    21.276] (II) Power Button: Configuring as keyboard
[    21.276] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    21.276] (**) Option "xkb_rules" "evdev"
[    21.276] (**) Option "xkb_model" "evdev"
[    21.276] (**) Option "xkb_layout" "us"
[    21.277] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    21.277] (II) No input driver/identifier specified (ignoring)
[    21.280] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event9)
[    21.280] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[    21.280] (**) USB 2.0 Camera: always reports core events
[    21.280] (**) USB 2.0 Camera: Device: "/dev/input/event9"
[    21.303] (--) USB 2.0 Camera: Found keys
[    21.303] (II) USB 2.0 Camera: Configuring as keyboard
[    21.303] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
[    21.303] (**) Option "xkb_rules" "evdev"
[    21.303] (**) Option "xkb_model" "evdev"
[    21.303] (**) Option "xkb_layout" "us"
[    21.304] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[    21.304] (II) No input driver/identifier specified (ignoring)
[    21.305] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[    21.305] (II) No input driver/identifier specified (ignoring)
[    21.307] (II) config/udev: Adding input device USB OpticalWheel Mouse (/dev/input/event11)
[    21.307] (**) USB OpticalWheel Mouse: Applying InputClass "evdev pointer catchall"
[    21.307] (**) USB OpticalWheel Mouse: always reports core events
[    21.307] (**) USB OpticalWheel Mouse: Device: "/dev/input/event11"
[    21.330] (--) USB OpticalWheel Mouse: Found 9 mouse buttons
[    21.330] (--) USB OpticalWheel Mouse: Found scroll wheel(s)
[    21.330] (--) USB OpticalWheel Mouse: Found relative axes
[    21.330] (--) USB OpticalWheel Mouse: Found x and y relative axes
[    21.330] (II) USB OpticalWheel Mouse: Configuring as mouse
[    21.330] (II) USB OpticalWheel Mouse: Adding scrollwheel support
[    21.330] (**) USB OpticalWheel Mouse: YAxisMapping: buttons 4 and 5
[    21.330] (**) USB OpticalWheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.330] (II) XINPUT: Adding extended input device "USB OpticalWheel Mouse" (type: MOUSE)
[    21.330] (**) USB OpticalWheel Mouse: (accel) keeping acceleration scheme 1
[    21.330] (**) USB OpticalWheel Mouse: (accel) acceleration profile 0
[    21.330] (**) USB OpticalWheel Mouse: (accel) acceleration factor: 2.000
[    21.330] (**) USB OpticalWheel Mouse: (accel) acceleration threshold: 4
[    21.330] (II) USB OpticalWheel Mouse: initialized for relative axes.
[    21.330] (II) config/udev: Adding input device USB OpticalWheel Mouse (/dev/input/mouse1)
[    21.330] (II) No input driver/identifier specified (ignoring)
[    21.336] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    21.336] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    21.337] (**) AT Translated Set 2 keyboard: always reports core events
[    21.337] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    21.373] (--) AT Translated Set 2 keyboard: Found keys
[    21.373] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    21.373] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    21.373] (**) Option "xkb_rules" "evdev"
[    21.373] (**) Option "xkb_model" "evdev"
[    21.373] (**) Option "xkb_layout" "us"
[    21.374] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[    21.374] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    21.374] (**) ETPS/2 Elantech Touchpad: always reports core events
[    21.374] (**) ETPS/2 Elantech Touchpad: Device: "/dev/input/event10"
[    21.380] (--) ETPS/2 Elantech Touchpad: Found 3 mouse buttons
[    21.380] (--) ETPS/2 Elantech Touchpad: Found absolute axes
[    21.380] (--) ETPS/2 Elantech Touchpad: Found x and y absolute axes
[    21.380] (--) ETPS/2 Elantech Touchpad: Found absolute touchpad.
[    21.380] (II) ETPS/2 Elantech Touchpad: Configuring as touchpad
[    21.380] (**) ETPS/2 Elantech Touchpad: YAxisMapping: buttons 4 and 5
[    21.380] (**) ETPS/2 Elantech Touchpad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    21.380] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD)
[    21.380] (II) ETPS/2 Elantech Touchpad: initialized for absolute axes.
[    21.380] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    21.380] (II) No input driver/identifier specified (ignoring)
[    21.381] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    21.381] (II) No input driver/identifier specified (ignoring)
[    21.384] (II) config/udev: Adding input device ENE eHome Infrared Remote Receiver (/dev/input/event6)
[    21.384] (**) ENE eHome Infrared Remote Receiver: Applying InputClass "evdev keyboard catchall"
[    21.384] (**) ENE eHome Infrared Remote Receiver: always reports core events
[    21.384] (**) ENE eHome Infrared Remote Receiver: Device: "/dev/input/event6"
[    21.393] (--) ENE eHome Infrared Remote Receiver: Found keys
[    21.393] (II) ENE eHome Infrared Remote Receiver: Configuring as keyboard
[    21.393] (II) XINPUT: Adding extended input device "ENE eHome Infrared Remote Receiver" (type: KEYBOARD)
[    21.393] (**) Option "xkb_rules" "evdev"
[    21.393] (**) Option "xkb_model" "evdev"
[    21.393] (**) Option "xkb_layout" "us"
[    67.801] (II) NOUVEAU(0): EDID vendor "CPT", prod id 5121
[    67.801] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    67.801] (II) NOUVEAU(0): Modeline "1280x800"x0.0   68.90  1280 1312 1344 1408  800 801 804 816 -hsync -vsync (48.9 kHz)
[    79.989] (II) NOUVEAU(0): EDID vendor "CPT", prod id 5121
[    79.989] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    79.989] (II) NOUVEAU(0): Modeline "1280x800"x0.0   68.90  1280 1312 1344 1408  800 801 804 816 -hsync -vsync (48.9 kHz)

Return To kencc-compilation:default System Information