dmesg - 1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-7-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-6ubuntu4) ) #36-Ubuntu SMP Fri Mar 18 23:18:58 UTC 2011 (Ubuntu 2.6.38-7.36-generic 2.6.38)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-7-generic root=/dev/sda1 rootflags=subvol=@ elevator=noop ro vt.handoff=7
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdec0000 (usable)
[ 0.000000] BIOS-e820: 00000000bdec0000 - 00000000bdedc000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bdedc000 - 00000000bdede000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdede000 - 00000000ce000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000132000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: TOSHIBA Satellite T115D/Satellite T115D, BIOS V1.70 06/01/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x132000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 00B0000000 mask FFF8000000 write-back
[ 0.000000] 4 base 00B8000000 mask FFFC000000 write-back
[ 0.000000] 5 base 00BC000000 mask FFFE000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000132000000 aka 4896M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000be000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbdec0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f7980] f7980
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bdec0000
[ 0.000000] 0000000000 - 00bde00000 page 2M
[ 0.000000] 00bde00000 - 00bdec0000 page 4k
[ 0.000000] kernel direct mapping tables up to bdec0000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000132000000
[ 0.000000] 0100000000 - 0132000000 page 2M
[ 0.000000] kernel direct mapping tables up to 132000000 @ bdeba000-bdec0000
[ 0.000000] RAMDISK: 3459a000 - 362c5000
[ 0.000000] ACPI: RSDP 00000000000f78f0 00024 (v02 TOSQCI)
[ 0.000000] ACPI: XSDT 00000000bdecc94a 0005C (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bdedbb59 000F4 (v03 AMD ANT 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 00000000bdecc9a6 0F1B3 (v01 TOSQCI TOSQCI00 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bdeddfc0 00040
[ 0.000000] ACPI: TCPA 00000000bdedbcc1 00032 (v02 TOSQCI TOSQCI00 06040000 LOHR 00000000)
[ 0.000000] ACPI: SSDT 00000000bdedbcf3 000D3 (v01 AMD POWERNOW 06040000 AMD 00000001)
[ 0.000000] ACPI: APIC 00000000bdedbdc6 00050 (v01 TOSQCI ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 00000000bdedbe16 0003C (v01 TOSQCI MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 00000000bdedbe52 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000bdedbe8a 00176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000132000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000132000000
[ 0.000000] NODE_DATA [0000000131ffb000 - 0000000131ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88012e000000-ffff8801317fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00132000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bdec0
[ 0.000000] 0: 0x00100000 -> 0x00132000
[ 0.000000] On node 0 totalpages: 982605
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 759544 pages, LIFO batch:31
[ 0.000000] Normal zone: 2800 pages used for memmap
[ 0.000000] Normal zone: 202000 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bdec0000 - 00000000bdedc000
[ 0.000000] PM: Registered nosave memory: 00000000bdedc000 - 00000000bdede000
[ 0.000000] PM: Registered nosave memory: 00000000bdede000 - 00000000ce000000
[ 0.000000] PM: Registered nosave memory: 00000000ce000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at ce000000 (gap: ce000000:12000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bdc00000 s83840 r8192 d22656 u2097152
[ 0.000000] pcpu-alloc: s83840 r8192 d22656 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 965463
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-7-generic root=/dev/sda1 rootflags=subvol=@ elevator=noop ro vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ f000000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 3698084k/5013504k available (5934k kernel code, 1083084k absent, 232336k reserved, 5015k data, 956k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 40632320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1600.061 MHz processor.
[ 0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.12 BogoMIPS (lpj=16000610)
[ 0.020010] pid_max: default: 32768 minimum: 301
[ 0.020048] Security Framework initialized
[ 0.020070] AppArmor: AppArmor initialized
[ 0.020073] Yama: becoming mindful.
[ 0.020746] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023820] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.025199] Mount-cache hash table entries: 256
[ 0.025384] Initializing cgroup subsys ns
[ 0.025389] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.025393] Initializing cgroup subsys cpuacct
[ 0.025399] Initializing cgroup subsys memory
[ 0.025413] Initializing cgroup subsys devices
[ 0.025416] Initializing cgroup subsys freezer
[ 0.025419] Initializing cgroup subsys net_cls
[ 0.025422] Initializing cgroup subsys blkio
[ 0.025466] tseg: 00bdf00000
[ 0.025470] mce: CPU supports 5 MCE banks
[ 0.025484] using C1E aware idle routine
[ 0.025519] SMP alternatives: switching to UP code
[ 0.038305] Freeing SMP alternatives: 20k freed
[ 0.038332] ACPI: Core revision 20110112
[ 0.038336] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.038596] ACPI: Forced DSDT copy: length 0x0F1B3 copied locally, original unmapped
[ 0.050018] ftrace: allocating 24319 entries in 96 pages
[ 0.060113] Setting APIC routing to flat
[ 0.060517] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.164973] CPU0: AMD Athlon(tm) Neo Processor MV-40 stepping 02
[ 0.170000] Performance Events: AMD PMU driver.
[ 0.170000] ... version: 0
[ 0.170000] ... bit width: 48
[ 0.170000] ... generic registers: 4
[ 0.170000] ... value mask: 0000ffffffffffff
[ 0.170000] ... max period: 00007fffffffffff
[ 0.170000] ... fixed-purpose events: 0
[ 0.170000] ... event mask: 000000000000000f
[ 0.170000] Brought up 1 CPUs
[ 0.170000] Total of 1 processors activated (3200.12 BogoMIPS).
[ 0.170000] devtmpfs: initialized
[ 0.170000] print_constraints: dummy:
[ 0.170000] Time: 11:44:17 Date: 03/20/11
[ 0.170000] NET: Registered protocol family 16
[ 0.170000] node 0 link 0: io port [1000, ffff]
[ 0.170000] TOM: 00000000ce000000 aka 3296M
[ 0.170000] node 0 link 0: mmio [a0000, bffff]
[ 0.170000] node 0 link 0: mmio [ce000000, cfcfffff]
[ 0.170000] node 0 link 0: mmio [cfd00000, cfefffff]
[ 0.170000] node 0 link 0: mmio [cff00000, cfffffff]
[ 0.170000] node 0 link 0: mmio [d0000000, efffffff]
[ 0.170000] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.170000] TOM2: 0000000132000000 aka 4896M
[ 0.170000] bus: [00, ff] on node 0 link 0
[ 0.170000] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.170000] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.170000] bus: 00 index 2 [mem 0xce000000-0xffffffff]
[ 0.170000] bus: 00 index 3 [mem 0x132000000-0xfcffffffff]
[ 0.170000] ACPI: bus type pci registered
[ 0.170000] PCI: MMCONFIG for domain 0000 [bus 00-0a] at [mem 0xe0000000-0xe0afffff] (base 0xe0000000)
[ 0.170000] PCI: MMCONFIG at [mem 0xe0000000-0xe0afffff] reserved in E820
[ 0.170000] PCI: Using configuration type 1 for base access
[ 0.170000] bio: create slab at 0
[ 0.170000] ACPI: EC: Look up EC in DSDT
[ 0.177282] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.270158] ACPI: Interpreter enabled
[ 0.270163] ACPI: (supports S0 S3 S4 S5)
[ 0.270191] ACPI: Using IOAPIC for interrupt routing
[ 0.355392] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.355700] ACPI: No dock devices found.
[ 0.355703] HEST: Table not found.
[ 0.355708] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.356824] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.358951] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.358956] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff]
[ 0.358960] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff]
[ 0.358964] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff]
[ 0.358968] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff]
[ 0.358972] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff]
[ 0.358975] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff]
[ 0.358979] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff]
[ 0.358983] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff]
[ 0.358988] pci_root PNP0A08:00: host bridge window [mem 0xce000000-0xdfffffff]
[ 0.358991] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.358995] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.358999] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.359024] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[ 0.359096] pci 0000:00:01.0: [1179:9602] type 1 class 0x000604
[ 0.359187] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[ 0.359231] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.359235] pci 0000:00:05.0: PME# disabled
[ 0.359258] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[ 0.359302] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.359306] pci 0000:00:06.0: PME# disabled
[ 0.359385] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.359410] pci 0000:00:11.0: reg 10: [io 0x8420-0x8427]
[ 0.359423] pci 0000:00:11.0: reg 14: [io 0x8414-0x8417]
[ 0.359437] pci 0000:00:11.0: reg 18: [io 0x8418-0x841f]
[ 0.359450] pci 0000:00:11.0: reg 1c: [io 0x8410-0x8413]
[ 0.359463] pci 0000:00:11.0: reg 20: [io 0x8400-0x840f]
[ 0.359476] pci 0000:00:11.0: reg 24: [mem 0xf0808000-0xf08083ff]
[ 0.359537] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.359555] pci 0000:00:12.0: reg 10: [mem 0xf0604000-0xf0604fff]
[ 0.359637] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.359655] pci 0000:00:12.1: reg 10: [mem 0xf0605000-0xf0605fff]
[ 0.359745] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.359771] pci 0000:00:12.2: reg 10: [mem 0xf0808400-0xf08084ff]
[ 0.359860] pci 0000:00:12.2: supports D1 D2
[ 0.359863] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.359869] pci 0000:00:12.2: PME# disabled
[ 0.359902] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.360015] pci 0000:00:13.0: reg 10: [mem 0xf0606000-0xf0606fff]
[ 0.360099] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.360117] pci 0000:00:13.1: reg 10: [mem 0xf0607000-0xf0607fff]
[ 0.360207] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.360232] pci 0000:00:13.2: reg 10: [mem 0xf0808800-0xf08088ff]
[ 0.360321] pci 0000:00:13.2: supports D1 D2
[ 0.360324] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.360330] pci 0000:00:13.2: PME# disabled
[ 0.360364] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.360485] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.360515] pci 0000:00:14.2: reg 10: [mem 0xf0600000-0xf0603fff 64bit]
[ 0.360588] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.360594] pci 0000:00:14.2: PME# disabled
[ 0.360613] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.360710] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.360770] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.360801] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.360825] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.360849] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.360923] pci 0000:01:05.0: [1002:9612] type 0 class 0x000300
[ 0.360937] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.360946] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
[ 0.360954] pci 0000:01:05.0: reg 18: [mem 0xcfdf0000-0xcfdfffff]
[ 0.360970] pci 0000:01:05.0: reg 24: [mem 0xcfe00000-0xcfefffff]
[ 0.360991] pci 0000:01:05.0: supports D1 D2
[ 0.361009] pci 0000:01:05.1: [1002:960f] type 0 class 0x000403
[ 0.361023] pci 0000:01:05.1: reg 10: [mem 0xcfdec000-0xcfdeffff]
[ 0.361065] pci 0000:01:05.1: supports D1 D2
[ 0.361150] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.361156] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.361161] pci 0000:00:01.0: bridge window [mem 0xcfd00000-0xcfefffff]
[ 0.361167] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.361227] pci 0000:08:00.0: [1969:1062] type 0 class 0x000200
[ 0.361252] pci 0000:08:00.0: reg 10: [mem 0xf0400000-0xf043ffff 64bit]
[ 0.361267] pci 0000:08:00.0: reg 18: [io 0xc000-0xc07f]
[ 0.361350] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.361356] pci 0000:08:00.0: PME# disabled
[ 0.380020] pci 0000:00:05.0: PCI bridge to [bus 08-08]
[ 0.380027] pci 0000:00:05.0: bridge window [io 0x0000-0x0000] (disabled)
[ 0.380032] pci 0000:00:05.0: bridge window [mem 0x00000000-0x000fffff] (disabled)
[ 0.380038] pci 0000:00:05.0: bridge window [mem 0x00000000-0x000fffff pref] (disabled)
[ 0.380095] pci 0000:09:00.0: [168c:002a] type 0 class 0x000280
[ 0.380119] pci 0000:09:00.0: reg 10: [mem 0xf0500000-0xf050ffff 64bit]
[ 0.380202] pci 0000:09:00.0: supports D1
[ 0.380205] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[ 0.380211] pci 0000:09:00.0: PME# disabled
[ 0.380236] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.380247] pci 0000:00:06.0: PCI bridge to [bus 09-09]
[ 0.380253] pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.380258] pci 0000:00:06.0: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.380264] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.380375] pci 0000:00:14.4: PCI bridge to [bus 0b-0b] (subtractive decode)
[ 0.380381] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.380388] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.380395] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.380399] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.380403] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
[ 0.380407] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
[ 0.380411] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
[ 0.380415] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
[ 0.380419] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
[ 0.380423] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
[ 0.380428] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
[ 0.380432] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
[ 0.380436] pci 0000:00:14.4: bridge window [mem 0xce000000-0xdfffffff] (subtractive decode)
[ 0.380440] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.380444] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.380448] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.380504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.380761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 0.380823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.380946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.380982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.381034] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.387350] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.387417] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.387483] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.387547] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.387613] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.387677] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.387742] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.387808] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.387967] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.387973] vgaarb: loaded
[ 0.388260] SCSI subsystem initialized
[ 0.388349] libata version 3.00 loaded.
[ 0.388416] usbcore: registered new interface driver usbfs
[ 0.388432] usbcore: registered new interface driver hub
[ 0.388468] usbcore: registered new device driver usb
[ 0.388804] wmi: Mapper loaded
[ 0.388807] PCI: Using ACPI for IRQ routing
[ 0.388812] PCI: pci_cache_line_size set to 64 bytes
[ 0.388907] pci 0000:08:00.0: no compatible bridge window for [mem 0xf0400000-0xf043ffff 64bit]
[ 0.388911] pci 0000:08:00.0: no compatible bridge window for [io 0xc000-0xc07f]
[ 0.388959] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.388963] reserve RAM buffer: 00000000bdec0000 - 00000000bfffffff
[ 0.388967] reserve RAM buffer: 0000000132000000 - 0000000133ffffff
[ 0.389106] NetLabel: Initializing
[ 0.389109] NetLabel: domain hash size = 128
[ 0.389111] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.389127] NetLabel: unlabeled traffic allowed by default
[ 0.389220] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.389227] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.391037] Switching to clocksource hpet
[ 0.398725] Switched to NOHz mode on CPU #0
[ 0.400253] AppArmor: AppArmor Filesystem Enabled
[ 0.400296] pnp: PnP ACPI init
[ 0.400321] ACPI: bus type pnp registered
[ 0.401472] pnp 00:00: [bus 00-ff]
[ 0.401477] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.401480] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.401484] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.401487] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.401491] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.401494] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.401498] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.401502] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.401505] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.401509] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.401516] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.401520] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.401523] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.401527] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.401530] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.401534] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.401537] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.401541] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.401544] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.401548] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.401551] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.401555] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.401558] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.401562] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.401565] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.401569] pnp 00:00: [mem 0xce000000-0xdfffffff window]
[ 0.401573] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[ 0.401576] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.401580] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.401583] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.401688] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.401762] pnp 00:01: [mem 0xfec00000-0xfec10fff]
[ 0.401766] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.401844] system 00:01: [mem 0xfec00000-0xfec10fff] could not be reserved
[ 0.401849] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.401854] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.402274] pnp 00:02: [io 0x0000-0x001f]
[ 0.402278] pnp 00:02: [io 0x0080-0x008f]
[ 0.402281] pnp 00:02: [io 0x00c0-0x00df]
[ 0.402284] pnp 00:02: [dma 4]
[ 0.402348] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.402364] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.402412] pnp 00:03: [irq 13]
[ 0.402469] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.402487] pnp 00:04: [io 0x0070-0x0071]
[ 0.402528] pnp 00:04: [irq 8]
[ 0.402585] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.402600] pnp 00:05: [io 0x0061]
[ 0.402663] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.402681] pnp 00:06: [io 0x0060]
[ 0.402684] pnp 00:06: [io 0x0064]
[ 0.402724] pnp 00:06: [irq 1]
[ 0.402783] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.402857] pnp 00:07: [irq 12]
[ 0.402933] pnp 00:07: Plug and Play ACPI device, IDs SYN1032 SYN1000 SYN0002 PNP0f13 (active)
[ 0.402980] pnp 00:08: [io 0x0022-0x0023]
[ 0.402983] pnp 00:08: [io 0x002e-0x002f]
[ 0.402986] pnp 00:08: [io 0x0068]
[ 0.402989] pnp 00:08: [io 0x006c]
[ 0.402992] pnp 00:08: [io 0x0072-0x0073]
[ 0.402995] pnp 00:08: [io 0x0080-0x0081]
[ 0.402998] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.403005] pnp 00:08: [io 0x0092]
[ 0.403008] pnp 00:08: [io 0x0220-0x022f]
[ 0.403011] pnp 00:08: [io 0x040b]
[ 0.403014] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.403017] pnp 00:08: [io 0x04d6]
[ 0.403019] pnp 00:08: [io 0x0530-0x0537]
[ 0.403022] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.403025] pnp 00:08: [io 0x0c14]
[ 0.403029] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.403031] pnp 00:08: [io 0x0c6c]
[ 0.403034] pnp 00:08: [io 0x0c6f]
[ 0.403037] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.403040] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.403043] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.403046] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.403049] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.403052] pnp 00:08: [io 0x8000-0x805f]
[ 0.403055] pnp 00:08: [io 0x00b2-0x00bf]
[ 0.403059] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.403062] pnp 00:08: [io 0x8200-0x82ff window]
[ 0.403065] pnp 00:08: [io 0x0f40-0x0f47]
[ 0.403068] pnp 00:08: [io 0x087f]
[ 0.403112] pnp 00:08: disabling [io 0x0022-0x0023] because it overlaps 0000:08:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.403117] pnp 00:08: disabling [io 0x002e-0x002f] because it overlaps 0000:08:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.403122] pnp 00:08: disabling [io 0x0068] because it overlaps 0000:08:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.403127] pnp 00:08: disabling [io 0x006c] because it overlaps 0000:08:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.403132] pnp 00:08: disabling [io 0x0072-0x0073] because it overlaps 0000:08:00.0 BAR 2 [io 0x0000-0x007f]
[ 0.403204] system 00:08: [io 0x0220-0x022f] has been reserved
[ 0.403209] system 00:08: [io 0x040b] has been reserved
[ 0.403213] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.403217] system 00:08: [io 0x04d6] has been reserved
[ 0.403221] system 00:08: [io 0x0530-0x0537] has been reserved
[ 0.403225] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.403229] system 00:08: [io 0x0c14] has been reserved
[ 0.403237] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.403241] system 00:08: [io 0x0c6c] has been reserved
[ 0.403245] system 00:08: [io 0x0c6f] has been reserved
[ 0.403249] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.403253] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.403257] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.403262] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.403266] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.403270] system 00:08: [io 0x8000-0x805f] has been reserved
[ 0.403274] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.403279] system 00:08: [io 0x8200-0x82ff window] has been reserved
[ 0.403283] system 00:08: [io 0x0f40-0x0f47] has been reserved
[ 0.403287] system 00:08: [io 0x087f] has been reserved
[ 0.403292] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.403360] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.403363] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.403367] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.403371] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 0.403374] pnp 00:09: [mem 0xff800000-0xff80ffff]
[ 0.403469] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.403474] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.403479] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.403483] system 00:09: [mem 0xff800000-0xff80ffff] has been reserved
[ 0.403488] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.403679] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.403745] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.403933] pnp: PnP ACPI: found 11 devices
[ 0.403936] ACPI: ACPI bus type pnp unregistered
[ 0.411306] pci 0000:00:05.0: BAR 14: assigned [mem 0xce000000-0xce0fffff]
[ 0.411315] pci 0000:00:05.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.411321] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.411325] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.411330] pci 0000:00:01.0: bridge window [mem 0xcfd00000-0xcfefffff]
[ 0.411335] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.411343] pci 0000:08:00.0: BAR 0: assigned [mem 0xce000000-0xce03ffff 64bit]
[ 0.411355] pci 0000:08:00.0: BAR 0: set to [mem 0xce000000-0xce03ffff 64bit] (PCI address [0xce000000-0xce03ffff])
[ 0.411360] pci 0000:08:00.0: BAR 2: assigned [io 0x1000-0x107f]
[ 0.411367] pci 0000:08:00.0: BAR 2: set to [io 0x1000-0x107f] (PCI address [0x1000-0x107f])
[ 0.411371] pci 0000:00:05.0: PCI bridge to [bus 08-08]
[ 0.411375] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff]
[ 0.411381] pci 0000:00:05.0: bridge window [mem 0xce000000-0xce0fffff]
[ 0.411385] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 0.411391] pci 0000:00:06.0: PCI bridge to [bus 09-09]
[ 0.411394] pci 0000:00:06.0: bridge window [io disabled]
[ 0.411399] pci 0000:00:06.0: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.411403] pci 0000:00:06.0: bridge window [mem pref disabled]
[ 0.411409] pci 0000:00:14.4: PCI bridge to [bus 0b-0b]
[ 0.411412] pci 0000:00:14.4: bridge window [io disabled]
[ 0.411452] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.411458] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.411476] pci 0000:00:05.0: enabling device (0000 -> 0003)
[ 0.411494] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.411499] pci 0000:00:05.0: setting latency timer to 64
[ 0.411510] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.411515] pci 0000:00:06.0: setting latency timer to 64
[ 0.411525] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.411529] pci_bus 0000:00: resource 5 [mem 0x000d0000-0x000d1fff]
[ 0.411532] pci_bus 0000:00: resource 6 [mem 0x000d2000-0x000d3fff]
[ 0.411536] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d5fff]
[ 0.411539] pci_bus 0000:00: resource 8 [mem 0x000d6000-0x000d7fff]
[ 0.411543] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000d9fff]
[ 0.411546] pci_bus 0000:00: resource 10 [mem 0x000da000-0x000dbfff]
[ 0.411550] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000ddfff]
[ 0.411554] pci_bus 0000:00: resource 12 [mem 0x000de000-0x000dffff]
[ 0.411557] pci_bus 0000:00: resource 13 [mem 0xce000000-0xdfffffff]
[ 0.411561] pci_bus 0000:00: resource 14 [mem 0xf0000000-0xffffffff]
[ 0.411565] pci_bus 0000:00: resource 15 [io 0x0000-0x0cf7]
[ 0.411568] pci_bus 0000:00: resource 16 [io 0x0d00-0xffff]
[ 0.411572] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.411575] pci_bus 0000:01: resource 1 [mem 0xcfd00000-0xcfefffff]
[ 0.411579] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.411583] pci_bus 0000:08: resource 0 [io 0x1000-0x1fff]
[ 0.411587] pci_bus 0000:08: resource 1 [mem 0xce000000-0xce0fffff]
[ 0.411591] pci_bus 0000:09: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.411595] pci_bus 0000:0b: resource 4 [mem 0x000a0000-0x000bffff]
[ 0.411598] pci_bus 0000:0b: resource 5 [mem 0x000d0000-0x000d1fff]
[ 0.411602] pci_bus 0000:0b: resource 6 [mem 0x000d2000-0x000d3fff]
[ 0.411605] pci_bus 0000:0b: resource 7 [mem 0x000d4000-0x000d5fff]
[ 0.411609] pci_bus 0000:0b: resource 8 [mem 0x000d6000-0x000d7fff]
[ 0.411613] pci_bus 0000:0b: resource 9 [mem 0x000d8000-0x000d9fff]
[ 0.411616] pci_bus 0000:0b: resource 10 [mem 0x000da000-0x000dbfff]
[ 0.411620] pci_bus 0000:0b: resource 11 [mem 0x000dc000-0x000ddfff]
[ 0.411623] pci_bus 0000:0b: resource 12 [mem 0x000de000-0x000dffff]
[ 0.411627] pci_bus 0000:0b: resource 13 [mem 0xce000000-0xdfffffff]
[ 0.411631] pci_bus 0000:0b: resource 14 [mem 0xf0000000-0xffffffff]
[ 0.411635] pci_bus 0000:0b: resource 15 [io 0x0000-0x0cf7]
[ 0.411638] pci_bus 0000:0b: resource 16 [io 0x0d00-0xffff]
[ 0.411690] NET: Registered protocol family 2
[ 0.411936] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.414372] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.419373] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.420115] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.420119] TCP reno registered
[ 0.420140] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.420206] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.420354] NET: Registered protocol family 1
[ 0.420374] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.420551] pci 0000:01:05.0: Boot video device
[ 0.420563] PCI: CLS 32 bytes, default 64
[ 0.420944] Trying to unpack rootfs image as initramfs...
[ 0.460472] PCI-DMA: Disabling AGP.
[ 0.460601] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.460604] PCI-DMA: using GART IOMMU.
[ 0.460609] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.464875] audit: initializing netlink socket (disabled)
[ 0.464893] type=2000 audit(1300621455.460:1): initialized
[ 0.510884] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.520641] VFS: Disk quotas dquot_6.5.2
[ 0.520765] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.521786] fuse init (API version 7.16)
[ 0.521918] msgmni has been set to 7351
[ 0.530469] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.530567] io scheduler noop registered (default)
[ 0.530571] io scheduler deadline registered
[ 0.530643] io scheduler cfq registered
[ 0.530905] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.530951] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[ 0.531091] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.531128] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.531234] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.531264] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.532175] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.532432] ACPI: AC Adapter [ACAD] (on-line)
[ 0.532522] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.532530] ACPI: Power Button [PWRB]
[ 0.532612] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.532716] ACPI: Lid Switch [LID]
[ 0.532791] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.532796] ACPI: Power Button [PWRF]
[ 0.533024] ACPI: acpi_idle registered with cpuidle
[ 0.533054] Marking TSC unstable due to TSC halts in idle
[ 0.545570] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.545576] ACPI: Thermal Zone [THRM] (67 C)
[ 0.545632] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.545690] ERST: Table is not found!
[ 0.547862] Linux agpgart interface v0.103
[ 0.549761] brd: module loaded
[ 0.563541] loop: module loaded
[ 0.563696] i2c-core: driver [adp5520] using legacy suspend method
[ 0.563699] i2c-core: driver [adp5520] using legacy resume method
[ 0.564343] Fixed MDIO Bus: probed
[ 0.564389] PPP generic driver version 2.4.2
[ 0.564451] tun: Universal TUN/TAP device driver, 1.6
[ 0.564454] tun: (C) 1999-2004 Max Krasnyansky
[ 0.564573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.564691] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.564722] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.564784] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.564835] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.564874] ehci_hcd 0000:00:12.2: debug port 1
[ 0.564905] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0808400
[ 0.580351] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.580597] hub 1-0:1.0: USB hub found
[ 0.580604] hub 1-0:1.0: 6 ports detected
[ 0.590437] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.590516] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.590623] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.590676] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.590711] ehci_hcd 0000:00:13.2: debug port 1
[ 0.590744] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0808800
[ 0.610256] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.610544] hub 2-0:1.0: USB hub found
[ 0.610550] hub 2-0:1.0: 6 ports detected
[ 0.610737] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.620408] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.620443] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.620554] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.620636] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf0604000
[ 0.684573] hub 3-0:1.0: USB hub found
[ 0.684624] hub 3-0:1.0: 3 ports detected
[ 0.690185] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.690262] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.690364] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.690400] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0605000
[ 0.754337] hub 4-0:1.0: USB hub found
[ 0.754350] hub 4-0:1.0: 3 ports detected
[ 0.760364] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.760440] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.760552] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.760642] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0606000
[ 0.824564] hub 5-0:1.0: USB hub found
[ 0.824610] hub 5-0:1.0: 3 ports detected
[ 0.830383] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.830457] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.830567] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 0.830637] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf0607000
[ 0.894358] hub 6-0:1.0: USB hub found
[ 0.894371] hub 6-0:1.0: 3 ports detected
[ 0.894538] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.894707] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.898143] i8042: Detected active multiplexing controller, rev 1.1
[ 0.899577] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.899587] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.900124] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 0.910485] ACPI: Battery Slot [BAT1] (battery present)
[ 0.910558] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.910609] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.910654] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.910872] mousedev: PS/2 mouse device common for all mice
[ 0.911134] rtc_cmos 00:04: RTC can wake from S4
[ 0.911203] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.911271] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.911439] device-mapper: uevent: version 1.0.3
[ 0.911556] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.911679] device-mapper: multipath: version 1.2.0 loaded
[ 0.911683] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.911916] cpuidle: using governor ladder
[ 0.911985] cpuidle: using governor menu
[ 0.912337] TCP cubic registered
[ 0.912518] NET: Registered protocol family 10
[ 0.913174] NET: Registered protocol family 17
[ 0.913199] Registering the dns_resolver key type
[ 0.913223] powernow-k8: Found 1 AMD Athlon(tm) Neo Processor MV-40 (1 cpu cores) (version 2.20.00)
[ 0.913273] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x16
[ 0.913277] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x16
[ 0.913458] PM: Hibernation image not present or could not be loaded.
[ 0.913476] registered taskstats version 1
[ 0.913768] Magic number: 3:334:732
[ 0.913913] rtc_cmos 00:04: setting system clock to 2011-03-20 11:44:17 UTC (1300621457)
[ 0.913918] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.913920] EDD information not available.
[ 0.952105] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.170388] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 1.445589] Freeing initrd memory: 29868k freed
[ 1.465266] Freeing unused kernel memory: 956k freed
[ 1.465815] Write protecting the kernel read-only data: 10240k
[ 1.466967] Freeing unused kernel memory: 192k freed
[ 1.474486] Freeing unused kernel memory: 1444k freed
[ 1.512808] udev[95]: starting version 167
[ 1.813635] usbcore: registered new interface driver uas
[ 1.860887] atl1c 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.860902] atl1c 0000:08:00.0: setting latency timer to 64
[ 1.920997] acpi device:2e: registered as cooling_device1
[ 1.929938] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:01/input/input4
[ 1.960515] Initializing USB Mass Storage driver...
[ 1.961227] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 1.962491] ahci 0000:00:11.0: version 3.0
[ 1.962557] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.962705] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.962711] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.964778] scsi1 : ahci
[ 1.964998] ata1: SATA max UDMA/133 abar m1024@0xf0808000 port 0xf0808100 irq 22
[ 1.965503] [drm] Initialized drm 1.1.0 20060810
[ 1.965532] scsi0 : usb-storage 1-4:1.0
[ 1.965773] usbcore: registered new interface driver usb-storage
[ 1.965776] USB Mass Storage support registered.
[ 1.990829] atl1c 0000:08:00.0: version 1.0.1.0-NAPI
[ 2.510085] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.510518] ata1.00: ATA-8: OCZ-VERTEX, 1.6, max UDMA/133
[ 2.510522] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.513391] ata1.00: configured for UDMA/133
[ 2.513510] scsi 1:0:0:0: Direct-Access ATA OCZ-VERTEX 1.6 PQ: 0 ANSI: 5
[ 2.513772] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.514077] sd 1:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.514172] sd 1:0:0:0: [sda] Write Protect is off
[ 2.514176] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.514208] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.515123] sda: sda1
[ 2.515504] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.602344] [drm] radeon defaulting to kernel modesetting.
[ 2.602350] [drm] radeon kernel modesetting enabled.
[ 2.602556] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.602563] radeon 0000:01:05.0: setting latency timer to 64
[ 2.605813] [drm] initializing kernel modesetting (RS780 0x1002:0x9612).
[ 2.605850] [drm] register mmio base: 0xCFDF0000
[ 2.605853] [drm] register mmio size: 65536
[ 2.606003] ATOM BIOS: Toshiba_BU3A
[ 2.606041] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 2.606045] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 2.606178] [drm] Detected VRAM RAM=256M, BAR=256M
[ 2.606184] [drm] RAM width 32bits DDR
[ 2.606274] [TTM] Zone kernel: Available graphics memory: 1898258 kiB.
[ 2.606277] [TTM] Initializing pool allocator.
[ 2.606305] [drm] radeon: 256M of VRAM memory ready
[ 2.606308] [drm] radeon: 512M of GTT memory ready.
[ 2.606338] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.606341] [drm] Driver supports precise vblank timestamp query.
[ 2.606368] [drm] radeon: irq initialized.
[ 2.606372] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 2.610901] [drm] Loading RS780 Microcode
[ 2.624234] radeon 0000:01:05.0: WB enabled
[ 2.658162] [drm] ring test succeeded in 1 usecs
[ 2.658362] [drm] radeon: ib pool ready.
[ 2.658452] [drm] ib test succeeded in 0 usecs
[ 2.658455] [drm] Enabling audio support
[ 2.660798] [drm] Radeon Display Connectors
[ 2.660802] [drm] Connector 0:
[ 2.660804] [drm] LVDS
[ 2.660808] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 2.660810] [drm] Encoders:
[ 2.660812] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 2.660815] [drm] Connector 1:
[ 2.660816] [drm] VGA
[ 2.660819] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 2.660822] [drm] Encoders:
[ 2.660824] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.660826] [drm] Connector 2:
[ 2.660828] [drm] HDMI-A
[ 2.660830] [drm] HPD1
[ 2.660832] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 2.660835] [drm] Encoders:
[ 2.660837] [drm] DFP1: INTERNAL_UNIPHY
[ 2.717874] [drm] radeon: power management initialized
[ 2.960795] scsi 0:0:0:0: Direct-Access Kingston DataTraveler C10 1.00 PQ: 0 ANSI: 2
[ 2.964759] sd 0:0:0:0: [sdb] 62586064 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.964894] sd 0:0:0:0: Attached scsi generic sg1 type 0
[ 2.965354] sd 0:0:0:0: [sdb] Write Protect is off
[ 2.965359] sd 0:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 2.966120] sd 0:0:0:0: [sdb] No Caching mode page present
[ 2.966125] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 2.968768] sd 0:0:0:0: [sdb] No Caching mode page present
[ 2.968774] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 2.969535] sdb: sdb1
[ 2.971759] sd 0:0:0:0: [sdb] No Caching mode page present
[ 2.971766] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 2.971771] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[ 3.748985] [drm] fb mappable at 0xD0141000
[ 3.748990] [drm] vram apper at 0xD0000000
[ 3.748992] [drm] size 4325376
[ 3.748994] [drm] fb depth is 24
[ 3.748996] [drm] pitch is 5632
[ 3.750411] Console: switching to colour frame buffer device 170x48
[ 3.750455] fb0: radeondrmfb frame buffer device
[ 3.750458] drm: registered panic notifier
[ 3.750469] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
[ 9.105461] Btrfs loaded
[ 9.107199] device fsid e3414513274e00e7-eeeae872c0243999 devid 1 transid 24791 /dev/sda1
[ 9.119287] Btrfs detected SSD devices, enabling SSD mode
[ 9.547932] btrfs: turning off barriers
[ 9.547939] btrfs: use zlib compression
[ 9.547943] btrfs: use ssd allocation scheme
[ 9.688091] udev[388]: starting version 167
[ 9.813405] lp: driver loaded but no devices found
[ 10.344379] device fsid e3414513274e00e7-eeeae872c0243999 devid 1 transid 24791 /dev/sda1
[ 11.177747] atl1c 0000:08:00.0: irq 42 for MSI/MSI-X
[ 11.241234] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.403597] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8040, revision 0
[ 11.409015] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.631935] MCE: In-kernel MCE decoding enabled.
[ 11.633655] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 11.633849] SP5100 TCO timer: Watchdog reboot not detected.
[ 11.633978] SP5100 TCO timer: initialized (0xffffc9000067a0f0). heartbeat=60 sec (nowayout=0)
[ 11.640791] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 11.875249] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[ 12.041578] cfg80211: Calling CRDA to update world regulatory domain
[ 12.041932] EDAC MC: Ver: 2.1.0 Mar 15 2011
[ 12.849487] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[ 12.849497] synaptics: Toshiba Satellite T115D detected, limiting rate to 40pps.
[ 12.910742] EDAC amd64_edac: v3.3.0
[ 12.944722] EDAC amd64: DRAM ECC disabled.
[ 12.944731] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 12.944733] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 12.944735] (Note that use of the override may cause unknown side effects.)
[ 12.987565] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[ 13.259687] Linux video capture interface: v2.00
[ 13.700360] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b19a)
[ 13.718846] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:13.2/usb2/2-5/2-5:1.0/input/input6
[ 13.721755] usbcore: registered new interface driver uvcvideo
[ 13.721761] USB Video Class driver (v1.0.0)
[ 13.839407] cfg80211: World regulatory domain updated:
[ 13.839413] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.839417] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.839421] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.839425] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.839429] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.839433] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.369561] ath9k 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.369574] ath9k 0000:09:00.0: setting latency timer to 64
[ 14.851347] ath: EEPROM regdomain: 0x65
[ 14.851352] ath: EEPROM indicates we should expect a direct regpair map
[ 14.851358] ath: Country alpha2 being used: 00
[ 14.851360] ath: Regpair used: 0x65
[ 14.851688] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851693] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851696] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851700] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851703] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851707] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851710] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851714] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851717] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851721] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851724] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851728] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851731] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851735] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851738] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851742] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851745] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851749] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851752] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851756] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851759] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851763] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851766] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851770] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851773] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 14.851777] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 14.851780] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 14.871103] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 14.948509] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 14.949400] Registered led device: ath9k-phy0::radio
[ 14.949430] Registered led device: ath9k-phy0::assoc
[ 14.949459] Registered led device: ath9k-phy0::tx
[ 14.949491] Registered led device: ath9k-phy0::rx
[ 14.949502] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90001c20000, irq=18
[ 15.175998] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.225227] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.357172] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 15.357234] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 16.056507] ppdev: user-space parallel port driver
[ 18.093489] wlan0: authenticate with 00:1e:52:78:3e:79 (try 1)
[ 18.100395] wlan0: authenticated
[ 18.100425] wlan0: associate with 00:1e:52:78:3e:79 (try 1)
[ 18.103872] wlan0: RX AssocResp from 00:1e:52:78:3e:79 (capab=0x21 status=0 aid=5)
[ 18.103877] wlan0: associated
[ 18.114551] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 18.116890] cfg80211: Calling CRDA for country: US
[ 18.126013] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 18.126020] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 18.126023] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 18.126028] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 18.126031] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 18.126035] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 18.126038] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 18.126042] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 18.126045] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 18.126049] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 18.126052] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 18.126056] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 18.126059] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 18.126063] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 18.126066] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 18.126070] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 18.126074] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 18.126077] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 18.126081] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 18.126084] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 18.126088] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 18.126092] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 18.126095] cfg80211: Disabling freq 2467 MHz
[ 18.126097] cfg80211: Disabling freq 2472 MHz
[ 18.126099] cfg80211: Disabling freq 2484 MHz
[ 18.126104] cfg80211: Regulatory domain changed to country: US
[ 18.126107] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.126111] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 18.126114] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 18.126118] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.126122] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.126125] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.126129] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 28.300062] wlan0: no IPv6 routers present
[ 92.434399] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[ 100.786408] unity_support_t[1650]: segfault at 4 ip 00007fb36546c92e sp 00007fffe21a2100 error 4 in libGL.so.1.2[7fb36540d000+b6000]
[ 100.786932] Core dump to |/usr/share/apport/apport 1650 11 0 pipe failed
[ 100.890074] unity_support_t[1656]: segfault at 4 ip 00007f5305b9792e sp 00007fffaaa5d770 error 4 in libGL.so.1.2[7f5305b38000+b6000]
[ 100.890217] Core dump to |/usr/share/apport/apport 1656 11 0 pipe failed
[ 101.118981] Core dump to |/usr/share/apport/apport 1664 6 0 pipe failed
[ 101.943553] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 204.711915] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[ 523.903136] fglrxinfo[17770]: segfault at 4 ip 00007f48b475692e sp 00007fff8d18cb20 error 4 in libGL.so.1.2[7f48b46f7000+b6000]
[ 523.906508] Core dump to |/usr/share/apport/apport 17770 11 0 pipe failed
[ 640.890753] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 640.890760] Disabling lock debugging due to kernel taint
[ 641.083661] [fglrx] Maximum main memory to use for locked dma buffers: 3549 MBytes.
[ 641.083719] [fglrx] vendor: 1002 device: 9612 count: 1
[ 641.084139] [fglrx] ioport: bar 1, base 0x9000, size: 0x100
[ 641.084150] radeon 0000:01:05.0: setting latency timer to 64
[ 641.084570] [fglrx] Kernel PAT support is enabled
[ 641.084606] [fglrx] module loaded - fglrx 8.82.8 [Jan 26 2011] with 1 minors
[ 3285.309734] btrfs: turning off barriers
[ 3285.309742] btrfs: use lzo compression
[ 3285.309747] btrfs: enabling disk space caching
[ 3285.309750] btrfs: setting nodatasum
[ 3285.309753] btrfs: use ssd allocation scheme
[ 4017.100068] atl1c 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[ 4091.410315] btrfs: turning off barriers
[ 4091.410332] btrfs: use lzo compression
[ 4091.410341] btrfs: enabling disk space caching
[ 4091.410347] btrfs: setting nodatasum
[ 4091.410353] btrfs: use ssd allocation scheme
[ 4091.410362] btrfs: use lzo compression
[ 4102.405100] btrfs: turning off barriers
[ 4102.405117] btrfs: use lzo compression
[ 4102.405127] btrfs: enabling disk space caching
[ 4102.405132] btrfs: setting nodatasum
[ 4102.405138] btrfs: use ssd allocation scheme
[ 4102.405145] btrfs: use lzo compression
[ 4123.293431] btrfs: turning off barriers
[ 4123.293446] btrfs: use lzo compression
[ 4123.293456] btrfs: enabling disk space caching
[ 4123.293461] btrfs: setting nodatasum
[ 4123.293468] btrfs: use ssd allocation scheme
[ 4123.293474] btrfs: use zlib compression
[ 4147.293396] btrfs: turning off barriers
[ 4147.293412] btrfs: use zlib compression
[ 4147.293420] btrfs: use ssd allocation scheme
[ 4147.293426] btrfs: turning off barriers
[ 4147.293433] btrfs: use lzo compression
[ 4147.293441] btrfs: enabling disk space caching
[ 4147.293446] btrfs: setting nodatasum
[ 4147.293452] btrfs: use ssd allocation scheme
[ 4147.293458] btrfs: use zlib compression
[ 4907.540105] atl1c 0000:08:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.