dmesg - c-ray

Return To c-ray System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-6-686-pae ([email protected]) (gcc version 4.9.2 (Debian 4.9.2-10+deb8u1) ) #1 SMP Debian 3.16.57-2 (2018-07-14)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fff9fff] usable
BIOS-e820: [mem 0x000000007fffa000-0x000000007fffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.3 present.
DMI: HP ProLiant ML330 G3, BIOS D15 05/29/2003
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7fffa max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 400020000 mask FFFFF0000 uncachable
  2 base 400040000 mask FFFFF0000 uncachable
  3 base 400060000 mask FFFFF0000 uncachable
  4 base 400080000 mask FFFFF0000 uncachable
  5 base 4000A0000 mask FFFFF0000 uncachable
  6 base 4000C0000 mask FFFFF0000 uncachable
  7 base 4000E0000 mask FFFFF0000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f4fd0-0x000f4fdf] mapped at [c00f4fd0]
initial memory mapped: [mem 0x00000000-0x01dfffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37200000-0x373fffff]
 [mem 0x37200000-0x373fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x371fffff]
 [mem 0x34000000-0x371fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37400000-0x375fdfff]
 [mem 0x37400000-0x375fdfff] page 4k
BRK [0x017e0000, 0x017e0fff] PGTABLE
BRK [0x017e1000, 0x017e2fff] PGTABLE
BRK [0x017e3000, 0x017e3fff] PGTABLE
BRK [0x017e4000, 0x017e4fff] PGTABLE
RAMDISK: [mem 0x363f6000-0x371f2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F4F70 000014 (v00 COMPAQ)
ACPI: RSDT 0x000000007FFFA000 000030 (v01 COMPAQ D15      00000002 \xffffffd2?   0000162E)
ACPI: FACP 0x000000007FFFA040 000074 (v01 COMPAQ D15      00000002 \xffffffd2?   0000162E)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20140424/tbfadt-704)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1bControlBlock: 32, using default 16 (20140424/tbfadt-704)
ACPI: DSDT 0x000000007FFFA240 0022F1 (v01 COMPAQ DSDT     00000001 MSFT 0100000B)
ACPI: FACS 0x000000007FFFA0C0 000040
ACPI: APIC 0x000000007FFFA100 0000AC (v01 COMPAQ 00000083 00000002 \xffffffd2?   0000162E)
ACPI: SPCR 0x000000007FFFA1C0 000050 (v01 COMPAQ SPCRRBSU 00000001 \xffffffd2?   0000162E)
ACPI: Local APIC address 0xfee00000
1161MB HIGHMEM available.
885MB LOWMEM available.
  mapped low ram: 0 - 375fe000
  low ram: 0 - 375fe000
BRK [0x017e5000, 0x017e5fff] PGTABLE
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  Normal   [mem 0x01000000-0x375fdfff]
  HighMem  [mem 0x375fe000-0x7fff9fff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0x7fff9fff]
On node 0 totalpages: 524184
free_area_init_node: node 0, pgdat c16a1600, node_mem_map f53f6020
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  Normal zone: 1740 pages used for memmap
  Normal zone: 222718 pages, LIFO batch:31
  HighMem zone: 2324 pages used for memmap
  HighMem zone: 297468 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x920
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31
ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32])
IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47
ACPI: IOAPIC (id[0x05] address[0xfec03000] gsi_base[48])
IOAPIC[3]: apic_id 5, version 17, address 0xfec03000, GSI 48-63
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 80
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x80000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7582000 s36224 r0 d21120 u57344
pcpu-alloc: s36224 r0 d21120 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522412
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000375fe:0007fffa)
Initializing Movable for node 0 (00000000:00000000)
Memory: 2056588K/2096736K available (4810K kernel code, 581K rwdata, 1468K rodata, 640K init, 468K bss, 40148K reserved, 1189872K highmem)
virtual kernel memory layout:
    fixmap  : 0xffd34000 - 0xfffff000   (2860 kB)
    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
      .init : 0xc16b6000 - 0xc1756000   ( 640 kB)
      .data : 0xc14b2bb8 - 0xc16b4780   (2054 kB)
      .text : 0xc1000000 - 0xc14b2bb8   (4810 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:2304 nr_irqs:1424 16
CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2399.305 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4798.61 BogoMIPS (lpj=9597220)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Filling RSB on context switch
Freeing SMP alternatives memory: 20K (c1756000 - c175b000)
ftrace: allocating 20906 entries in 41 pages
Enabling APIC mode:  Flat.  Using 4 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(TM) CPU 2.40GHz (fam: 0f, model: 02, stepping: 09)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version:                0
... bit width:              40
... generic registers:      18
... value mask:             000000ffffffffff
... max period:             0000007fffffffff
... fixed-purpose events:   0
... event mask:             000000000003ffff
CPU 1 irqstacks, hard=f4d40000 soft=f4d42000
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9597.50 BogoMIPS)
devtmpfs: initialized
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=0
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x28ff]; [io  0x0000-0x0cff] ignored
acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cff]; [??? 0x00000000-0x00000cff flags 0x0] ignored
acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cff]; [??? 0x00000000-0x00000cff flags 0x0] ignored
acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x28ff]; [io  0x0000-0x28ff] ignored
acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x28ff]; [??? 0x00000000-0x000028ff flags 0x0] ignored
acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x28ff]; [io  0x0000-0x28ff] ignored
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00]
pci_bus 0000:00: root bus resource [io  0x0000-0x28ff]
pci_bus 0000:00: root bus resource [mem 0xf6f00000-0xf7ffffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci 0000:00:00.0: [1166:0017] type 00 class 0x060000
pci 0000:00:00.1: [1166:0017] type 00 class 0x060000
pci 0000:00:03.0: [1002:4752] type 00 class 0x030000
pci 0000:00:03.0: reg 0x10: [mem 0xf7000000-0xf7ffffff]
pci 0000:00:03.0: reg 0x14: [io  0x2400-0x24ff]
pci 0000:00:03.0: reg 0x18: [mem 0xf6ff0000-0xf6ff0fff]
pci 0000:00:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:04.0: [14e4:16a6] type 00 class 0x020000
pci 0000:00:04.0: reg 0x10: [mem 0xf6fe0000-0xf6feffff 64bit]
pci 0000:00:04.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: [0e11:a0f0] type 00 class 0x088000
pci 0000:00:05.0: reg 0x10: [io  0x1800-0x18ff]
pci 0000:00:05.0: reg 0x14: [mem 0xf6fd0000-0xf6fd00ff]
pci 0000:00:06.0: [9005:0080] type 00 class 0x010000
pci 0000:00:06.0: reg 0x10: [io  0x2800-0x28ff]
pci 0000:00:06.0: reg 0x14: [mem 0xf6fc0000-0xf6fc0fff 64bit]
pci 0000:00:06.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:0e.0: [1166:0217] type 00 class 0x010182
pci 0000:00:0e.0: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:0e.0: reg 0x14: [io  0x03f4-0x03f7]
pci 0000:00:0e.0: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:0e.0: reg 0x1c: [io  0x0374-0x0377]
pci 0000:00:0e.0: reg 0x20: [io  0x2000-0x200f]
pci 0000:00:0e.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:0e.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:0e.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:0e.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:0f.0: [1166:0203] type 00 class 0x060100
pci 0000:00:0f.2: [1166:0221] type 00 class 0x0c0310
pci 0000:00:0f.2: reg 0x10: [mem 0xf6fb0000-0xf6fb0fff]
pci 0000:00:0f.3: [1166:0227] type 00 class 0x060000
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 7 *10 11 15)
ACPI: PCI Interrupt Link [RAID] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [IN18] (IRQs 4 *5 7 10 11 15)
ACPI: PCI Interrupt Link [IN19] (IRQs 4 5 7 10 11 15) *3
ACPI: PCI Interrupt Link [IN21] (IRQs 4 5 *7 10 11 15)
ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN23] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 10 11 15) *0, disabled.
ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15) *0, disabled.
vgaarb: setting as boot device: PCI:0000:00:03.0
vgaarb: device added: PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:03.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fffa000-0x7fffffff]
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource refined-jiffies
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x0f50-0x0f58] has been reserved
system 00:00: [io  0x0408-0x040f] has been reserved
system 00:00: [io  0x0900-0x0903] has been reserved
system 00:00: [io  0x0904] has been reserved
system 00:00: [io  0x0910-0x0911] has been reserved
system 00:00: [io  0x0920-0x0923] has been reserved
system 00:00: [io  0x0930-0x0937] has been reserved
system 00:00: [io  0x0940-0x0947] has been reserved
system 00:00: [io  0x0950-0x0957] has been reserved
system 00:00: [io  0x0c06-0x0c08] has been reserved
system 00:00: [io  0x0c14] has been reserved
system 00:00: [io  0x0c49-0x0c4a] has been reserved
system 00:00: [io  0x0c50-0x0c52] has been reserved
system 00:00: [io  0x0c6c-0x0c6f] has been reserved
system 00:00: [io  0x0230-0x0233] has been reserved
system 00:00: [io  0x0260-0x0267] has been reserved
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0700-0x0713] has been reserved
system 00:00: [io  0x0800-0x081f] has been reserved
system 00:00: [io  0x0c80-0x0c83] has been reserved
system 00:00: [io  0x0cd4-0x0cd7] has been reserved
system 00:00: [io  0x0cf9] could not be reserved
system 00:00: [io  0x1900-0x1903] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
Switched to clocksource acpi_pm
pci 0000:00:03.0: BAR 6: assigned [mem 0xf6f00000-0xf6f1ffff pref]
pci 0000:00:06.0: BAR 6: assigned [mem 0xf6f20000-0xf6f3ffff pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x28ff]
pci_bus 0000:00: resource 5 [mem 0xf6f00000-0xf7ffffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:00:00.1: MSI quirk detected; MSI disabled
pci 0000:00:03.0: Video device with shadowed ROM
ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 10
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14324K (f63f6000 - f71f3000)
platform rtc_cmos: registered platform RTC device (no PNP device found)
microcode: CPU0 sig=0xf29, pf=0x2, revision=0xf
microcode: CPU1 sig=0xf29, pf=0x2, revision=0xf
microcode: Microcode Update Driver: v2.00 , Peter Oruba
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1540372961.875:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1720
alg: No test for stdrng (krng)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
Using IPI No-Shortcut mode
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2018-10-24 09:22:42 UTC (1540372962)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 640K (c16b6000 - c1756000)
Write protecting the kernel text: 4812k
Write protecting the kernel read-only data: 1472k
systemd-udevd[61]: starting version 215
random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
SCSI subsystem initialized
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Floppy drive(s): fd0 is 1.44M
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci-pci: OHCI PCI platform driver
FDC 0 is a National Semiconductor PC87306
tg3 0000:00:04.0 eth0: Tigon3 [partno(TBD) rev 1002] (PCI:33MHz:32-bit) MAC address 00:0b:cd:cf:3b:62
tg3 0000:00:04.0 eth0: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:00:04.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:00:04.0 eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
piix4_smbus 0000:00:0f.0: SMBus Host Controller at 0x700, revision 0
scsi0 : pata_serverworks
scsi1 : pata_serverworks
ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
ata2: DUMMY
ata1.00: ATAPI: LTN486S, YQSK, max PIO4
ata1.00: configured for PIO4
scsi 0:0:0:0: CD-ROM            COMPAQ   CD-ROM LTN486S   YQSK PQ: 0 ANSI: 5
tsc: Refined TSC clocksource calibration: 2399.318 MHz
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
Switched to clocksource tsc
scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
        
        aic7892: Ultra160 Wide Channel A, SCSI Id=0, 32/253 SCBs

ohci-pci 0000:00:0f.2: OHCI PCI host controller
ohci-pci 0000:00:0f.2: new USB bus registered, assigned bus number 1
ohci-pci 0000:00:0f.2: irq 10, io mem 0xf6fb0000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI PCI host controller
usb usb1: Manufacturer: Linux 3.16.0-6-686-pae ohci_hcd
usb usb1: SerialNumber: 0000:00:0f.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 2:0:4:0: Direct-Access     SEAGATE  ST373307LW       0007 PQ: 0 ANSI: 3
scsi2:A:4:0: Tagged Queuing enabled.  Depth 8
scsi target2:0:4: Beginning Domain Validation
scsi target2:0:4: wide asynchronous
scsi target2:0:4: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
scsi 2:0:4:0: Write Buffer failure 8000002
scsi target2:0:4: Domain Validation detected failure, dropping back
scsi target2:0:4: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 63)
scsi target2:0:4: Ending Domain Validation
scsi 2:0:4:0: Attached scsi generic sg1 type 0
sd 2:0:4:0: [sda] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB)
sd 2:0:4:0: [sda] Write Protect is off
sd 2:0:4:0: [sda] Mode Sense: ab 00 10 08
sd 2:0:4:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 < sda5 >
sd 2:0:4:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: systemd: uninitialized urandom read (16 bytes read, 88 bits of entropy available)
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'x86'.
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 97 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 111 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 111 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 111 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 112 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 112 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 112 bits of entropy available)
random: systemd: uninitialized urandom read (16 bytes read, 115 bits of entropy available)
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
random: nonblocking pool is initialized
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
systemd-udevd[155]: starting version 215
ppdev: user-space parallel port driver
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input4
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[156]: Received request to flush runtime journal from PID 1
Adding 2951164k swap on /dev/sda5.  Priority:-1 extents:1 across:2951164k FS
tg3 0000:00:04.0: firmware: failed to load tigon/tg3_tso.bin (-2)
tg3 0000:00:04.0: Direct firmware load failed with error -2
tg3 0000:00:04.0: Falling back to user helper
tg3 0000:00:04.0 eth0: TSO capability disabled
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 [email protected]).
tg3 0000:00:04.0 eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:00:04.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
perf interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5026 > 5000), lowering kernel.perf_event_max_sample_rate to 25000

Return To c-ray System Information