dmesg - Disk
Linux version 4.12.9-gentoo-zen (root@GenQQ) (gcc version 7.1.0 (Gentoo 7.1.0-r1 p1.1) ) #1 SMP PREEMPT Tue Aug 29 19:34:15 CEST 2017
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000094bff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000df7dffff] usable
BIOS-e820: [mem 0x00000000df7e0000-0x00000000df7e1fff] ACPI NVS
BIOS-e820: [mem 0x00000000df7e2000-0x00000000df7effff] ACPI data
BIOS-e820: [mem 0x00000000df7f0000-0x00000000df7fffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. P55-UD4/P55-UD4, BIOS F9 06/25/2010
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CEFFF write-protect
CF000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 100000000 mask FE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf7e0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f57f0-0x000f57ff] mapped at [ffff96cf400f57f0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff96cf4008e000] 8e000 size 24576
BRK [0xd2202000, 0xd2202fff] PGTABLE
BRK [0xd2203000, 0xd2203fff] PGTABLE
BRK [0xd2204000, 0xd2204fff] PGTABLE
BRK [0xd2205000, 0xd2205fff] PGTABLE
BRK [0xd2206000, 0xd2206fff] PGTABLE
RAMDISK: [mem 0x3746b000-0x37a2cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F71B0 000014 (v00 GBT )
ACPI: RSDT 0x00000000DF7E2040 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000DF7E20C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000DF7E2180 0062F5 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x00000000DF7E0000 000040
ACPI: HPET 0x00000000DF7E85C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000DF7E8640 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS 0x00000000DF7E8680 000560 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000DF7E8BE0 000A32 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 0x00000000DF7E84C0 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000DF7E9640 0036C4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000011fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000093fff]
node 0: [mem 0x0000000000100000-0x00000000df7dffff]
node 0: [mem 0x0000000100000000-0x000000011fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
On node 0 totalpages: 1046387
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3987 pages, LIFO batch:0
DMA32 zone: 14240 pages used for memmap
DMA32 zone: 911328 pages, LIFO batch:31
Normal zone: 2048 pages used for memmap
Normal zone: 131072 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00094000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdf7e0000-0xdf7e1fff]
PM: Registered nosave memory: [mem 0xdf7e2000-0xdf7effff]
PM: Registered nosave memory: [mem 0xdf7f0000-0xdf7fffff]
PM: Registered nosave memory: [mem 0xdf800000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xdf800000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff96d05fc00000 s110424 r8192 d28840 u262144
pcpu-alloc: s110424 r8192 d28840 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030014
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4028344K/4185548K available (10003K kernel code, 1503K rwdata, 3520K rodata, 1516K init, 956K bss, 157204K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 37274 entries in 146 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2797.800 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5595.60 BogoMIPS (lpj=2797800)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz (family: 0x6, model: 0x1e, stepping: 0x5)
Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
core: CPU erratum AAJ80 worked around
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (44680.33 BogoMIPS)
sched_clock: Marking stable (513000000, 0)->(627483016, -114483016)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdf7e0000-0xdf7e1fff] (8192 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 18:27:58, date: 08/29/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfbfff000-0xfbfff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:3b39] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xf900-0xf91f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf41f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbffd000-0xfbffd7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:01:00.0: [1002:6738] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfbdc0000-0xfbddffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
pci 0000:03:00.0: reg 0x24: [mem 0xfbbfe000-0xfbbfffff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
pci 0000:03:00.1: reg 0x10: [io 0xcf00-0xcf07]
pci 0000:03:00.1: reg 0x14: [io 0xce00-0xce03]
pci 0000:03:00.1: reg 0x18: [io 0xcd00-0xcd07]
pci 0000:03:00.1: reg 0x1c: [io 0xcc00-0xcc03]
pci 0000:03:00.1: reg 0x20: [io 0xcb00-0xcb0f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xbe00-0xbeff]
pci 0000:04:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 04]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:05:02.0: [13f0:1023] type 00 class 0x020000
pci 0000:05:02.0: reg 0x10: [io 0xde00-0xdeff]
pci 0000:05:02.0: reg 0x14: [mem 0xfbcff000-0xfbcff0ff]
pci 0000:05:02.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:02.0: supports D1 D2
pci 0000:05:02.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:05:07.0: [104c:8024] type 00 class 0x0c0010
pci 0000:05:07.0: reg 0x10: [mem 0xfbcfe000-0xfbcfe7ff]
pci 0000:05:07.0: reg 0x14: [mem 0xfbcf8000-0xfbcfbfff]
pci 0000:05:07.0: supports D1 D2
pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdf800000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00094c00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdf7e0000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
hpet: hpet6 irq 28 for MSI
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:04: [io 0x0400-0x047f] has been reserved
system 00:04: [io 0x0580-0x05ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x000da400-0x000dbfff] has been reserved
system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:06: [mem 0xdf7e0000-0xdf7effff] could not be reserved
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x00100000-0xdf7dffff] could not be reserved
system 00:06: [mem 0xdf7f0000-0xdf7fffff] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
system 00:06: [mem 0x000e0000-0x000effff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf800000-0xdf9fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfa00000-0xdfbfffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfbd00000-0xfbd1ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xdf800000-0xdf9fffff]
pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.4: bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xfba00000-0xfba1ffff pref]
pci 0000:00:1c.6: PCI bridge to [bus 04]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
pci 0000:05:02.0: BAR 6: assigned [mem 0xfbc00000-0xfbc0ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xdf800000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xdf800000-0xdf9fffff]
pci_bus 0000:02: resource 2 [mem 0xdfa00000-0xdfbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:03: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:04: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0xdf800000-0xfebfffff window]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
random: fast init done
Freeing initrd memory: 5896K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdb7e0000-0xdf7e0000] (64MB) mapped at [ffff96d01b7e0000-ffff96d01f7dffff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=20 bucket_order=0
zbud: loaded
ntfs: driver 2.1.32 [Flags: R/W].
fuse init (API version 7.26)
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
GHES: HEST is not enabled!
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (BARTS 0x1002:0x6738 0x1787:0x2010 0x00).
ATOM BIOS: BARTS
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 2017136 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading BARTS Microcode
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff96d055db4c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff96d055db4c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffa36640e32118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD5
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY1
[drm] Connector 4:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP5: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
tsc: Refined TSC clocksource calibration: 2798.011 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2854e9eaae1, max_idle_ns: 440795264633 ns
[drm] fb mappable at 0xE0363000
[drm] vram apper at 0xE0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 2
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbfff000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 2
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffe000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
NET: Registered protocol family 10
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input0
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x106e5, pf=0x2, revision=0x4
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input1
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 13:29:495
sound pcmC0D0p: hash matches
rtc_cmos 00:01: setting system clock to 2017-08-29 18:28:00 UTC (1504031280)
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
PM: Hibernation image not present or could not be loaded.
ALSA device list:
#0: HDA Intel MID at 0xfbff8000 irq 30
#1: HDA ATI HDMI at 0xfbdfc000 irq 31
Freeing unused kernel memory: 1516K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 220K
Freeing unused kernel memory: 576K
libata version 3.00 loaded.
scsi host0: pata_legacy
ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
usb 2-8: new high-speed USB device number 2 using ehci-pci
scsi host0: pata_legacy
ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
scsi host0: pata_legacy
ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
scsi host0: pata_legacy
ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
scsi host0: pata_jmicron
scsi host1: pata_jmicron
ata5: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 17
ata6: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 17
clocksource: Switched to clocksource tsc
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ems apst
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd100 irq 32
ata8: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd180 irq 32
ata9: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd200 irq 32
ata10: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd280 irq 32
ata11: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd300 irq 32
ata12: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd380 irq 32
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi host8: ahci
scsi host9: ahci
ata13: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe100 irq 16
ata14: SATA max UDMA/133 abar m8192@0xfbbfe000 port 0xfbbfe180 irq 16
ata13: SATA link down (SStatus 0 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-7: SAMSUNG HD753LJ, 1AA01118, max UDMA7
ata7.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1118 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata9.00: ATAPI: ATAPI iHAS424 A, ZL1B, max UDMA/100
ata9.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM ATAPI iHAS424 A ZL1B PQ: 0 ANSI: 5
ata10: SATA link down (SStatus 0 SControl 300)
ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata11.00: ATA-8: WDC WD10EURS-630AB1, 80.00A80, max UDMA/133
ata11.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata11.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA WDC WD10EURS-630 0A80 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 6:0:0:0: [sdb] 4096-byte physical blocks
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata12: SATA link down (SStatus 0 SControl 300)
sdb: sdb1 sdb2 sdb3 sdb4
sd 6:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:0: Attached scsi generic sg1 type 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
scsi: Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
HP CISS Driver (v 3.6.26)
Adaptec aacraid driver 1.2.1[50792]-custom
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 07.701.17.00-rc1
qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 9.00.00.00-k.
Emulex LightPulse Fibre Channel SCSI driver 11.2.0.14
Copyright (C) 2017 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
mpt3sas version 15.100.00.00 loaded
usbcore: registered new interface driver usb-storage
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
usb 5-1: new low-speed USB device number 2 using uhci_hcd
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
dca service started, version 1.12.1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
random: crng init done
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0 eth0: RTL8168d/8111d at 0xffffa36640671000, 00:24:1d:c4:8d:13, XID 083000c0 IRQ 33
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.0.0-k
ixgbe: Copyright (c) 1999-2016 Intel Corporation.
ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
ixgb: Copyright (c) 1999-2008 Intel Corporation.
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:045E:0750.0001/input/input9
microsoft 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1a.2-1/input0
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/0003:045E:0750.0002/input/input10
microsoft 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1a.2-1/input1
usb 5-2: new full-speed USB device number 3 using uhci_hcd
input: Logitech Gaming Mouse G303 as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:046D:C080.0003/input/input11
hid-generic 0003:046D:C080.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Gaming Mouse G303] on usb-0000:00:1a.2-2/input0
input: Logitech Gaming Mouse G303 as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/0003:046D:C080.0004/input/input12
hid-generic 0003:046D:C080.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech Gaming Mouse G303] on usb-0000:00:1a.2-2/input1
EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
udevd[2889]: starting version 3.2.2
udevd[2890]: starting eudev-3.2.2
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20170303/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input13
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input14
ACPI: Power Button [PWRF]
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
wmi: Mapper loaded
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
r8169 0000:04:00.0 enp4s0: renamed from eth0
serio: i8042 KBD port at 0x60,0x64 irq 1
gpio_ich: GPIO from 436 to 511 on gpio_ich
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
mousedev: PS/2 mouse device common for all mice
floppy0: no floppy controllers found
work still pending
EXT4-fs (sda3): re-mounted. Opts: (null)
Adding 8388604k swap on /swapfile. Priority:-1 extents:15 across:10395644k FS
radeon_dp_aux_transfer_native: 158 callbacks suppressed
radeon_dp_aux_transfer_native: 158 callbacks suppressed
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2798002687 Hz
vboxdrv: Successfully loaded version 5.1.26 (interface 0x002a0000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
RTL871X: module init start
RTL871X: rtl8812au v4.3.14_13455.20150212_BTCOEX20150128-51
RTL871X: rtl8812au BT-Coex version = BTCOEX20150128-51
RTL871X: rtw_ndev_init(wlan0)
usbcore: registered new interface driver rtl8812au
RTL871X: module init ret=0
rtl8812au 2-8:1.0 wlp0s29f7u8: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29f7u8: link is not ready
RTL871X: rtw_set_802_11_connect(wlp0s29f7u8) fw_state=0x00000008
RTL871X: start auth
RTL871X: auth success, start assoc
RTL871X: rtw_cfg80211_indicate_connect(wlp0s29f7u8) BSS not found !!
RTL871X: assoc success
IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29f7u8: link becomes ready
RTL871X: send eapol packet
RTL871X: send eapol packet
RTL871X: set pairwise key camid:4, addr:80:c6:ab:2a:45:e8, kid:0, type:AES
RTL871X: set group key camid:5, addr:80:c6:ab:2a:45:e8, kid:1, type:TKIP
perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3129 > 3127), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3924 > 3911), lowering kernel.perf_event_max_sample_rate to 50000