ODROID-XU4 Linux Benchmarks

ODROID XU4 20190713 bare

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1907137-KH-1812082SK39
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results

Limit displaying results to tests within:

C/C++ Compiler Tests 7 Tests
Compression Tests 2 Tests
CPU Massive 12 Tests
Creator Workloads 5 Tests
Multi-Core 8 Tests
Programmer / Developer System Benchmarks 3 Tests
Renderers 3 Tests
Server 3 Tests
Server CPU Tests 7 Tests
Single-Threaded 4 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
ASUS Tinker Board
December 04 2018
  6 Hours, 52 Minutes
Raspberry Pi 3 Model A+
December 05 2018
  5 Hours, 40 Minutes
Raspberry Pi 3 Model B+
December 05 2018
  8 Hours, 4 Minutes
Jetson TX1
December 06 2018
  5 Hours, 6 Minutes
Jetson TX2
December 06 2018
  4 Hours, 17 Minutes
ODROID C1 Plus
December 07 2018
  7 Hours, 17 Minutes
ALL-H3-CC H5
December 07 2018
  8 Hours, 56 Minutes
AML-S905X-CC
December 07 2018
  5 Hours, 28 Minutes
ODROID XU4
December 08 2018
  3 Hours, 44 Minutes
ODROID XU4 20190713 bare
July 13 2019
 
Invert Hiding All Results Option
  5 Hours, 32 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 3 Model A+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model A Plus Rev 1.0, Memory: 431MB, Disk: 32GB SC32G, Graphics: BCM2708

OS: Raspbian 9.6, Kernel: 4.14.79-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 3 Model B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.6, Kernel: 4.14.79-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 4096x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (4 Cores / 6 Threads), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.0, Display Server: X Server 1.18.3, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609 + CUDA 9.0, File-System: ext4, Screen Resolution: 4096x4320

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Python Notes: Python 2.7.12 + Python 3.5.1+

ODROID C1 Plus

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

ALL-H3-CC H5

Processor: ARMv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.6, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

AML-S905X-CC

Processor: ARMv8 Cortex-A53 @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G

OS: Raspbian 9.6, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

ODROID XU4

Processor: ARMv7 rev 3 @ 1.50GHz (8 Cores), Motherboard: ODROID-XU4 Hardkernel Odroid XU4, Memory: 2048MB, Disk: 16GB AJTD4R, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.37-135 (armv7l), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Kernel Notes: usbhid.quirks=0x0eef:0x0005:0x0004
Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

ODROID XU4 20190713 bare

Processor: ARMv7 rev 3 @ 1.50GHz (8 Cores), Motherboard: ODROID-XU4, Memory: 2048MB, Disk: 16GB AJTD4R

OS: Ubuntu 18.04, Kernel: 4.14.127-164 (armv7l), File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
System Notes: Python 2.7.15+.

ODROID-XU4 Linux BenchmarksProcessorMotherboardMemoryDiskGraphicsMonitorOSKernelDesktopDisplay ServerCompilerFile-SystemScreen ResolutionDisplay DriverVulkanASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bareARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB32GB GB1QTDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 20170516ext41024x768ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model A Plus Rev 1.0431MB32GB SC32GBCM2708Raspbian 9.64.14.79-v7+ (armv7l)X Server 1.19.21824x984BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3927MB32GB GB2MW656x416ARMv8 rev 1 @ 1.73GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA TEGRAUbuntu 16.044.4.38-tegra (aarch64)X Server 1.18.4NVIDIA 1.0.01.0.8GCC 5.4.0 201606094096x2160ARMv8 rev 3 @ 2.04GHz (4 Cores / 6 Threads)quill8192MB31GB 032G34Unity 7.4.0X Server 1.18.3GCC 5.4.0 20160609 + CUDA 9.04096x4320ARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC804MB32GB GB1QTARM Mali3.10.107-190 (armv7l)X Server 1.18.4GCC 5.4.0 201606091920x2160ARMv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H52048MBRaspbian 9.64.18.0-rc3-gfc36def997cf-dirty (aarch64)X Server 1.19.2GCC 6.3.0 20170516ARMv8 Cortex-A53 @ 1.51GHz (4 Cores)Libre Board AML-S905X-CC32GB SC32G4.14.53-00653-gc01abe8ba6bc (aarch64)ARMv7 rev 3 @ 1.50GHz (8 Cores)ODROID-XU4 Hardkernel Odroid XU416GB AJTD4RVE228Ubuntu 18.044.14.37-135 (armv7l)X Server 1.19.6GCC 7.3.01920x1080ODROID-XU44.14.127-164 (armv7l)OpenBenchmarking.orgCompiler Details- ASUS Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v - Raspberry Pi 3 Model A+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Raspberry Pi 3 Model B+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - Jetson TX1: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v - Jetson TX2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v - ODROID C1 Plus: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v - ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - AML-S905X-CC: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v - ODROID XU4: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v - ODROID XU4 20190713 bare: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-mode=thumb --with-target-system-zlib -v Processor Details- ASUS Tinker Board: Scaling Governor: cpufreq-dt interactive- Raspberry Pi 3 Model A+: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 Model B+: Scaling Governor: BCM2835 Freq ondemand- Jetson TX1: Scaling Governor: tegra-cpufreq interactive- Jetson TX2: Scaling Governor: tegra_cpufreq schedutil- ODROID C1 Plus: Scaling Governor: meson_cpufreq performance- AML-S905X-CC: Scaling Governor: arm-big-little ondemand- ODROID XU4: Scaling Governor: cpufreq-dt performance- ODROID XU4 20190713 bare: Scaling Governor: cpufreq-dt ondemandPython Details- ASUS Tinker Board: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 Model A+: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 Model B+: Python 2.7.13 + Python 3.5.3- Jetson TX1: Python 2.7.12 + Python 3.5.2- Jetson TX2: Python 2.7.12 + Python 3.5.1+- ODROID C1 Plus: Python 2.7.12 + Python 3.5.2- ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- AML-S905X-CC: Python 2.7.13 + Python 3.5.3- ODROID XU4: Python 2.7.15rc1 + Python 3.6.7Kernel Details- ODROID XU4: usbhid.quirks=0x0eef:0x0005:0x0004System Details- ODROID XU4 20190713 bare: Python 2.7.15+.

ASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bareLogarithmic Result OverviewPhoronix Test SuitePHPBenchPHP Micro BenchmarksLAME MP3 EncodingC-RayPrimesieve7-Zip CompressionTTSIOD 3D RendererGraphicsMagickTinymembenchAOBenchZstd CompressionRedisPyBench

ODROID-XU4 Linux Benchmarkstinymembench: Standard Memcpygo-benchmark: jsongo-benchmark: buildgo-benchmark: garbagettsiod-renderer: Phong Rendering With Soft-Shadow Mappinggraphics-magick: Swirlgraphics-magick: Rotategraphics-magick: Sharpengraphics-magick: Enhancedgraphics-magick: Resizinggraphics-magick: Noise-Gaussiangraphics-magick: HWB Color Spacecompress-7zip: Compress Speed Testbuild-php: Time To Compilec-ray: Total Time - 4K, 16 Rays Per Pixelprimesieve: 1e12 Prime Number Generationaobench: 2048 x 2048 - Total Timecompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19encode-mp3: WAV To MP3redis: SADDredis: GETredis: SETpybench: Total For Average Test Timesphpbench: PHP Benchmark Suitephp: Zend benchphp: Zend micro_benchASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare1522137761592797977698072816404222.263166171653116130217171562857216238.351622455562772002205459337611684.5724.1613121880491623971310817.09243611113395119952075110428719.4230317736722474015098420868403605.8634.1812922239940314090038316.8321341110299441791110121141153294360.9930617867722953515066121005380525.8734.89377580759847787786520001722286345.055010131257718914653482973389166146.7011536571946708032663263731092662.4011.82383170035742710539750001521296449.6758118352988211075665437587331134143.5495.8049694763421442808453351333932.029.699732729457685480518514.1315261192673614902807165844763.28333.4612121114083010019823901340098.1241.5213163256918367766100411.9015248722630130231371600491388.60518.33416515342137485406752121110.1559.3521301821120323469878120.212541131238105322091760900282225.84301.17789441008157189222911378265.8834.14225551.37378024266215794385451730382153150.41123.752058392288581865664915962073.0411.221366.0746.16367228196015754380499.98795.30411.45152.14155.88123.62201078.00222715.56180524.265053957003.0011.48OpenBenchmarking.org

Tinymembench

This benchmark tests the system memory (RAM) performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemcpyASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare8001600240032004000SE +/- 2.53, N = 3SE +/- 0.51, N = 3SE +/- 11.58, N = 3SE +/- 26.02, N = 3SE +/- 1.82, N = 3SE +/- 0.99, N = 3SE +/- 1.82, N = 3SE +/- 10.17, N = 3SE +/- 29.70, N = 3SE +/- 56.30, N = 61522.001312.001292.003775.003831.00973.001316.002130.002255.001366.071. (CC) gcc options: -O2 -lm
OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemcpyASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare7001400210028003500Min: 1518.8 / Avg: 1522 / Max: 1527Min: 1310.8 / Avg: 1311.5 / Max: 1312.5Min: 1269.3 / Avg: 1291.77 / Max: 1307.9Min: 3723.5 / Avg: 3774.7 / Max: 3808.4Min: 3827.7 / Avg: 3830.77 / Max: 3834Min: 971.2 / Avg: 973.17 / Max: 974.4Min: 1312.9 / Avg: 1316.03 / Max: 1319.2Min: 2110.7 / Avg: 2130.3 / Max: 2144.8Min: 2224.5 / Avg: 2254.7 / Max: 2314.1Min: 1266 / Avg: 1366.07 / Max: 1565.51. (CC) gcc options: -O2 -lm

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemsetASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU43K6K9K12K15KSE +/- 19.85, N = 3SE +/- 3.67, N = 3SE +/- 25.50, N = 3SE +/- 120.27, N = 3SE +/- 0.23, N = 3SE +/- 0.21, N = 3SE +/- 0.83, N = 3SE +/- 16.63, N = 3SE +/- 1.60, N = 3421618661848102661391529642190556948121. (CC) gcc options: -O2 -lm
OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemsetASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU42K4K6K8K10KMin: 4191.6 / Avg: 4216.33 / Max: 4255.6Min: 1858.4 / Avg: 1865.73 / Max: 1869.8Min: 1796.8 / Avg: 1847.8 / Max: 1873.5Min: 10025.3 / Avg: 10265.57 / Max: 10395.8Min: 13915.1 / Avg: 13915.33 / Max: 13915.8Min: 2964.1 / Avg: 2964.4 / Max: 2964.8Min: 2188.5 / Avg: 2189.7 / Max: 2191.3Min: 5535.7 / Avg: 5568.67 / Max: 5589Min: 4809 / Avg: 4812.17 / Max: 4814.11. (CC) gcc options: -O2 -lm

Go Benchmarks

Benchmark for monitoring real time performance of the Go implementation for HTTP, JSON and garbage testing per iteration. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgNanoseconds/Operation, Fewer Is BetterGo BenchmarksTest: jsonASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CC70M140M210M280M350MSE +/- 3379917.86, N = 12SE +/- 577572.30, N = 3SE +/- 3679059.57, N = 12SE +/- 642391.67, N = 3SE +/- 330836.91, N = 3SE +/- 3398913.62, N = 3SE +/- 2667231.63, N = 3SE +/- 837211.44, N = 31377615921880491622239940318075984770035742272945768325691836182112032
OpenBenchmarking.orgNanoseconds/Operation, Fewer Is BetterGo BenchmarksTest: jsonASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CC60M120M180M240M300MMin: 120268898 / Avg: 137761592.25 / Max: 159309457Min: 187235331 / Avg: 188049161.67 / Max: 189166027Min: 216854857 / Avg: 223994030.58 / Max: 251653273Min: 79991440 / Avg: 80759846.67 / Max: 82035770Min: 69400550 / Avg: 70035741.67 / Max: 70513830Min: 268961200 / Avg: 272945768.33 / Max: 279707775Min: 322842675 / Avg: 325691835.67 / Max: 331022064Min: 181047698 / Avg: 182112032 / Max: 183763647

OpenBenchmarking.orgNanoseconds/Operation, Fewer Is BetterGo BenchmarksTest: buildASUS Tinker BoardJetson TX1Jetson TX220000M40000M60000M80000M100000MSE +/- 1154115205.06, N = 3SE +/- 525294897.79, N = 3SE +/- 121002137.67, N = 3797977698077877865200071053975000
OpenBenchmarking.orgNanoseconds/Operation, Fewer Is BetterGo BenchmarksTest: buildASUS Tinker BoardJetson TX1Jetson TX214000M28000M42000M56000M70000MMin: 78162607595 / Avg: 79797769807.33 / Max: 82026247481Min: 78163410000 / Avg: 78778652000 / Max: 79823777000Min: 70828191000 / Avg: 71053975000 / Max: 71242304000

OpenBenchmarking.orgNanoseconds/Operation, Fewer Is BetterGo BenchmarksTest: garbageASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CC17M34M51M68M85MSE +/- 505479.60, N = 12SE +/- 554479.58, N = 12SE +/- 269206.37, N = 3SE +/- 40748.41, N = 3SE +/- 17313.14, N = 3SE +/- 3132834.17, N = 9SE +/- 1279863.10, N = 3SE +/- 190713.70, N = 32816404239713108409003831722286315212964548051857766100434698781
OpenBenchmarking.orgNanoseconds/Operation, Fewer Is BetterGo BenchmarksTest: garbageASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CC13M26M39M52M65MMin: 25047440 / Avg: 28164042 / Max: 31115118Min: 35864394 / Avg: 39713107.5 / Max: 41087408Min: 40406684 / Avg: 40900383 / Max: 41333276Min: 17146960 / Avg: 17222862.67 / Max: 17286512Min: 15178908 / Avg: 15212964 / Max: 15235412Min: 47235666 / Avg: 54805185.22 / Max: 70862755Min: 75878084 / Avg: 77661004.33 / Max: 80143076Min: 34405674 / Avg: 34698780.67 / Max: 35056714

TTSIOD 3D Renderer

A portable GPL 3D software renderer that supports OpenMP and Intel Threading Building Blocks with many different rendering modes. This version does not use OpenGL but is entirely CPU/software based. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare1224364860SE +/- 0.13, N = 3SE +/- 0.02, N = 3SE +/- 0.03, N = 3SE +/- 0.04, N = 3SE +/- 0.03, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.02, N = 3SE +/- 0.09, N = 322.2617.0916.8345.0549.6714.1311.9020.2151.3746.161. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++
OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare1020304050Min: 22.12 / Avg: 22.26 / Max: 22.53Min: 17.07 / Avg: 17.09 / Max: 17.14Min: 16.79 / Avg: 16.83 / Max: 16.88Min: 44.98 / Avg: 45.05 / Max: 45.13Min: 49.62 / Avg: 49.67 / Max: 49.7Min: 14.1 / Avg: 14.13 / Max: 14.16Min: 11.88 / Avg: 11.9 / Max: 11.92Min: 20.19 / Avg: 20.21 / Max: 20.22Min: 51.33 / Avg: 51.37 / Max: 51.39Min: 45.99 / Avg: 46.16 / Max: 46.31. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++

GraphicsMagick

This is a test of GraphicsMagick with its OpenMP implementation that performs various imaging tests to stress the system's CPU. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: SwirlASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare1326395265SE +/- 0.45, N = 5SE +/- 0.33, N = 3SE +/- 0.25, N = 4SE +/- 0.00, N = 331242150581515253736-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma1. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread
OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: SwirlASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare1122334455Min: 30 / Avg: 31 / Max: 32Min: 50 / Avg: 50.33 / Max: 51Min: 14 / Avg: 14.75 / Max: 15Min: 36 / Avg: 36 / Max: 361. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: RotateASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare306090120150SE +/- 0.95, N = 4SE +/- 0.33, N = 3SE +/- 0.33, N = 3SE +/- 0.33, N = 3SE +/- 0.33, N = 36636341011182624418072-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma1. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread
OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: RotateASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare20406080100Min: 63 / Avg: 65.75 / Max: 67Min: 101 / Avg: 101.33 / Max: 102Min: 24 / Avg: 24.33 / Max: 25Min: 79 / Avg: 79.67 / Max: 80Min: 72 / Avg: 72.33 / Max: 731. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: SharpenASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare816243240SE +/- 0.33, N = 3SE +/- 0.14, N = 7SE +/- 0.33, N = 3SE +/- 0.13, N = 12SE +/- 1.38, N = 12SE +/- 1.71, N = 61711113135118132428-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma1. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread
OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: SharpenASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare714212835Min: 17 / Avg: 17.33 / Max: 18Min: 11 / Avg: 11.14 / Max: 12Min: 30 / Avg: 30.67 / Max: 31Min: 11 / Avg: 11.25 / Max: 12Min: 20 / Avg: 24.25 / Max: 31Min: 19 / Avg: 27.5 / Max: 301. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: EnhancedASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare714212835SE +/- 0.34, N = 6SE +/- 1.84, N = 6161110252997122619-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma1. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread
OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: EnhancedASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare612182430Min: 24 / Avg: 25.5 / Max: 26Min: 15 / Avg: 18.67 / Max: 261. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: ResizingASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare20406080100SE +/- 0.33, N = 3SE +/- 0.88, N = 3SE +/- 0.33, N = 3SE +/- 0.58, N = 353332977882622386260-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma1. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread
OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: ResizingASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare20406080100Min: 53 / Avg: 53.33 / Max: 54Min: 76 / Avg: 77.33 / Max: 79Min: 25 / Avg: 25.67 / Max: 26Min: 59 / Avg: 60 / Max: 611. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: Noise-GaussianASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare510152025SE +/- 0.34, N = 61199182176101515-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma1. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread
OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: Noise-GaussianASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare510152025Min: 13 / Avg: 14.5 / Max: 151. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread

OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: HWB Color SpaceASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare20406080100SE +/- 0.33, N = 3SE +/- 0.33, N = 3615144911073630537975-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lSM -lICE -lX11 -llzma -lxml2-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma-ljbig -lwebp -lwebpmux -ltiff -ljpeg -lXext -lX11 -llzma1. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread
OpenBenchmarking.orgIterations Per Minute, More Is BetterGraphicsMagick 1.3.30Operation: HWB Color SpaceASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare20406080100Min: 60 / Avg: 60.67 / Max: 61Min: 74 / Avg: 74.67 / Max: 751. (CC) gcc options: -fopenmp -O2 -pthread -lz -lm -lgomp -lpthread

7-Zip Compression

This is a test of 7-Zip using p7zip with its integrated benchmark feature or upstream 7-Zip for the Windows x64 build. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare12002400360048006000SE +/- 44.66, N = 3SE +/- 1.45, N = 3SE +/- 26.84, N = 5SE +/- 23.02, N = 3SE +/- 25.98, N = 3SE +/- 17.13, N = 3SE +/- 2.33, N = 3SE +/- 3.76, N = 3SE +/- 86.01, N = 12SE +/- 134.81, N = 630211995179146535665149013022209438543801. (CXX) g++ options: -pipe -lpthread
OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare10002000300040005000Min: 2965 / Avg: 3020.67 / Max: 3109Min: 1992 / Avg: 1994.67 / Max: 1997Min: 1705 / Avg: 1791.4 / Max: 1852Min: 4610 / Avg: 4652.67 / Max: 4689Min: 5620 / Avg: 5665.33 / Max: 5710Min: 1468 / Avg: 1490.33 / Max: 1524Min: 1298 / Avg: 1302.33 / Max: 1306Min: 2202 / Avg: 2208.67 / Max: 2215Min: 4009 / Avg: 4385.42 / Max: 4988Min: 4026 / Avg: 4379.83 / Max: 48461. (CXX) g++ options: -pipe -lpthread

Timed PHP Compilation

This test times how long it takes to build PHP 5 with the Zend engine. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterTimed PHP Compilation 7.1.9Time To CompileASUS Tinker BoardRaspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID XU4ODROID XU4 20190713 bare2004006008001000SE +/- 4.17, N = 3SE +/- 0.93, N = 3SE +/- 1.20, N = 3SE +/- 0.29, N = 3SE +/- 6.05, N = 3SE +/- 21.39, N = 6717.001101.00482.00437.00451.00499.98-O2 -pedantic -ldl -lz -lm-O2 -pedantic -ldl -lz -lm-O2 -pedantic -ldl -lz -lm-O2 -pedantic -ldl -lz -lm1. (CC) gcc options:
OpenBenchmarking.orgSeconds, Fewer Is BetterTimed PHP Compilation 7.1.9Time To CompileASUS Tinker BoardRaspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID XU4ODROID XU4 20190713 bare2004006008001000Min: 711.14 / Avg: 716.58 / Max: 724.77Min: 1099.55 / Avg: 1100.84 / Max: 1102.63Min: 480.79 / Avg: 482.27 / Max: 484.64Min: 436.19 / Avg: 436.73 / Max: 437.21Min: 439.06 / Avg: 451.13 / Max: 457.86Min: 435.59 / Avg: 499.98 / Max: 575.331. (CC) gcc options:

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare7001400210028003500SE +/- 7.52, N = 3SE +/- 3.04, N = 3SE +/- 2.11, N = 3SE +/- 58.16, N = 9SE +/- 47.97, N = 9SE +/- 1.23, N = 3SE +/- 45.91, N = 3SE +/- 2.02, N = 3SE +/- 9.48, N = 3SE +/- 47.92, N = 61562.002075.002114.00973.00587.002807.003137.001760.00730.00795.301. (CC) gcc options: -lm -lpthread -O3
OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare5001000150020002500Min: 1547.33 / Avg: 1561.89 / Max: 1572.4Min: 2071.79 / Avg: 2075.4 / Max: 2081.44Min: 2111.44 / Avg: 2113.87 / Max: 2118.07Min: 752.93 / Avg: 972.82 / Max: 1277.28Min: 530.93 / Avg: 586.5 / Max: 969.2Min: 2805.39 / Avg: 2807.08 / Max: 2809.47Min: 3087.21 / Avg: 3136.88 / Max: 3228.59Min: 1757.64 / Avg: 1760.29 / Max: 1764.26Min: 714.57 / Avg: 730.37 / Max: 747.35Min: 711.24 / Avg: 795.3 / Max: 1028.681. (CC) gcc options: -lm -lpthread -O3

Primesieve

Primesieve generates prime numbers using a highly optimized sieve of Eratosthenes implementation. Primesieve benchmarks the CPU's L1/L2 cache performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPrimesieve 7.11e12 Prime Number GenerationASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare400800120016002000SE +/- 13.72, N = 9SE +/- 12.59, N = 3SE +/- 14.04, N = 3SE +/- 4.49, N = 3SE +/- 11.10, N = 9SE +/- 11.22, N = 3SE +/- 15.89, N = 3SE +/- 9.55, N = 3SE +/- 6.07, N = 3SE +/- 4.18, N = 3857.001104.001153.00389.00331.001658.001600.00900.00382.00411.451. (CXX) g++ options: -O3 -lpthread
OpenBenchmarking.orgSeconds, Fewer Is BetterPrimesieve 7.11e12 Prime Number GenerationASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare30060090012001500Min: 812.7 / Avg: 856.63 / Max: 918.62Min: 1079.29 / Avg: 1104.23 / Max: 1119.71Min: 1127.07 / Avg: 1152.99 / Max: 1175.29Min: 380.79 / Avg: 388.97 / Max: 396.27Min: 278.18 / Avg: 330.63 / Max: 373.86Min: 1643.69 / Avg: 1658.35 / Max: 1680.39Min: 1583.78 / Avg: 1599.75 / Max: 1631.52Min: 890.2 / Avg: 900.24 / Max: 919.33Min: 372.58 / Avg: 381.55 / Max: 393.11Min: 403.09 / Avg: 411.45 / Max: 415.941. (CXX) g++ options: -O3 -lpthread

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare110220330440550SE +/- 3.23, N = 3SE +/- 1.37, N = 3SE +/- 5.35, N = 9SE +/- 0.37, N = 3SE +/- 0.08, N = 3SE +/- 0.06, N = 3SE +/- 1.04, N = 3SE +/- 0.43, N = 3SE +/- 0.09, N = 3SE +/- 0.11, N = 3216.00287.00294.00166.00134.00447.00491.00282.00153.00152.141. (CC) gcc options: -lm -O3
OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare90180270360450Min: 209.81 / Avg: 215.75 / Max: 220.9Min: 285.3 / Avg: 287.02 / Max: 289.72Min: 284.85 / Avg: 293.7 / Max: 332.27Min: 165.13 / Avg: 165.57 / Max: 166.3Min: 133.48 / Avg: 133.61 / Max: 133.77Min: 446.5 / Avg: 446.62 / Max: 446.71Min: 489.32 / Avg: 490.86 / Max: 492.85Min: 281.79 / Avg: 282.25 / Max: 283.11Min: 152.62 / Avg: 152.72 / Max: 152.91Min: 151.92 / Avg: 152.14 / Max: 152.271. (CC) gcc options: -lm -O3

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19ASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare80160240320400SE +/- 2.57, N = 3SE +/- 0.77, N = 12SE +/- 1.77, N = 3SE +/- 0.49, N = 3SE +/- 0.10, N = 3SE +/- 0.49, N = 3SE +/- 1.91, N = 3SE +/- 0.75, N = 3SE +/- 1.55, N = 3SE +/- 2.06, N = 6238.3519.42360.99146.70143.5463.28388.60225.84150.41155.881. (CC) gcc options: -O3 -pthread -lz -llzma
OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19ASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare70140210280350Min: 235.73 / Avg: 238.35 / Max: 243.48Min: 16.22 / Avg: 19.42 / Max: 26.62Min: 359 / Avg: 360.99 / Max: 364.52Min: 146.01 / Avg: 146.7 / Max: 147.64Min: 143.37 / Avg: 143.54 / Max: 143.71Min: 62.31 / Avg: 63.28 / Max: 63.91Min: 385.37 / Avg: 388.6 / Max: 391.99Min: 224.97 / Avg: 225.84 / Max: 227.32Min: 147.34 / Avg: 150.41 / Max: 152.33Min: 146.44 / Avg: 155.88 / Max: 161.661. (CC) gcc options: -O3 -pthread -lz -llzma

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3ASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare110220330440550SE +/- 1.56, N = 3SE +/- 0.94, N = 3SE +/- 3.77, N = 8SE +/- 1.30, N = 3SE +/- 0.10, N = 3SE +/- 3.00, N = 3SE +/- 0.09, N = 3SE +/- 0.16, N = 3SE +/- 0.27, N = 3SE +/- 0.28, N = 3162.00303.00306.00115.0095.80333.46518.33301.17123.75123.621. (CC) gcc options: -lm
OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3ASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare90180270360450Min: 160.07 / Avg: 161.95 / Max: 165.04Min: 300.98 / Avg: 302.54 / Max: 304.23Min: 301.04 / Avg: 305.97 / Max: 332.12Min: 113.04 / Avg: 115.1 / Max: 117.5Min: 95.63 / Avg: 95.8 / Max: 95.97Min: 330.3 / Avg: 333.46 / Max: 339.45Min: 518.24 / Avg: 518.33 / Max: 518.5Min: 300.89 / Avg: 301.17 / Max: 301.43Min: 123.32 / Avg: 123.75 / Max: 124.25Min: 123.08 / Avg: 123.62 / Max: 123.981. (CC) gcc options: -lm

Redis

Redis is an open-source data structure server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SADDASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare110K220K330K440K550KSE +/- 4083.60, N = 3SE +/- 1634.05, N = 3SE +/- 3046.19, N = 3SE +/- 6975.84, N = 3SE +/- 1657.83, N = 3SE +/- 1718.87, N = 12SE +/- 374.83, N = 3SE +/- 321.23, N = 3SE +/- 861.11, N = 3SE +/- 752.32, N = 3245556.00177367.00178677.00365719.00496947.00121211.0041651.0078944.00205839.00201078.001. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread
OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SADDASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare90K180K270K360K450KMin: 238038.55 / Avg: 245555.51 / Max: 252079.66Min: 174489.62 / Avg: 177366.54 / Max: 180147.72Min: 172592.33 / Avg: 178677.07 / Max: 181983.62Min: 353356.91 / Avg: 365719.42 / Max: 377500.97Min: 495049.5 / Avg: 496946.59 / Max: 500250.12Min: 106814.78 / Avg: 121211.49 / Max: 128965.7Min: 41012.18 / Avg: 41650.85 / Max: 42310.13Min: 78616.35 / Avg: 78943.74 / Max: 79586.16Min: 204123.28 / Avg: 205839.13 / Max: 206825.23Min: 200080.03 / Avg: 201078 / Max: 202552.171. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare140K280K420K560K700KSE +/- 4781.76, N = 3SE +/- 1541.56, N = 3SE +/- 413.51, N = 3SE +/- 7851.85, N = 4SE +/- 10719.66, N = 3SE +/- 1121.20, N = 3SE +/- 261.35, N = 3SE +/- 769.30, N = 3SE +/- 929.65, N = 3SE +/- 3782.66, N = 3277200.00224740.00229535.00467080.00634214.00140830.0053421.00100815.00228858.00222715.561. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread
OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare110K220K330K440K550KMin: 268240.34 / Avg: 277200.28 / Max: 284576Min: 221778.67 / Avg: 224740.34 / Max: 226963.22Min: 228728.27 / Avg: 229534.77 / Max: 230096.62Min: 450856.66 / Avg: 467080.01 / Max: 488519.81Min: 613496.94 / Avg: 634214.29 / Max: 649350.69Min: 139256.36 / Avg: 140829.76 / Max: 143000.14Min: 53058.84 / Avg: 53421.35 / Max: 53928.71Min: 99403.58 / Avg: 100814.84 / Max: 102051.23Min: 227014.75 / Avg: 228857.99 / Max: 229990.8Min: 215192.61 / Avg: 222715.56 / Max: 227169.471. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare90K180K270K360K450KSE +/- 3087.10, N = 3SE +/- 2189.13, N = 3SE +/- 1239.58, N = 3SE +/- 4436.84, N = 3SE +/- 5136.88, N = 3SE +/- 1235.45, N = 3SE +/- 241.82, N = 3SE +/- 221.42, N = 3SE +/- 993.31, N = 3SE +/- 2142.38, N = 3220545.00150984.00150661.00326632.00428084.00100198.0037485.0071892.00186566.00180524.261. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread
OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare70K140K210K280K350KMin: 215192.61 / Avg: 220545.01 / Max: 225886.61Min: 147145.38 / Avg: 150984.17 / Max: 154726.91Min: 148214.02 / Avg: 150660.77 / Max: 152230.17Min: 320821.28 / Avg: 326632.02 / Max: 335345.41Min: 418235.03 / Avg: 428084.31 / Max: 435540.06Min: 97933.59 / Avg: 100197.54 / Max: 102186.8Min: 37116.77 / Avg: 37484.84 / Max: 37940.59Min: 71469.41 / Avg: 71892.09 / Max: 72217.8Min: 184979.64 / Avg: 186566.12 / Max: 188394.88Min: 176273.58 / Avg: 180524.26 / Max: 183116.641. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare9K18K27K36K45KSE +/- 52.33, N = 3SE +/- 35.41, N = 3SE +/- 45.78, N = 3SE +/- 16.29, N = 3SE +/- 18.52, N = 3SE +/- 19.24, N = 3SE +/- 47.98, N = 3SE +/- 45.92, N = 3SE +/- 4.63, N = 3SE +/- 10.12, N = 3933720868210056373533523901406752291149155053
OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare7K14K21K28K35KMin: 9249 / Avg: 9336.67 / Max: 9430Min: 20819 / Avg: 20868.33 / Max: 20937Min: 20949 / Avg: 21005.33 / Max: 21096Min: 6353 / Avg: 6372.67 / Max: 6405Min: 5304 / Avg: 5334.67 / Max: 5368Min: 23865 / Avg: 23900.67 / Max: 23931Min: 40621 / Avg: 40675.33 / Max: 40771Min: 22827 / Avg: 22911.33 / Max: 22985Min: 4907 / Avg: 4915.33 / Max: 4923Min: 5036 / Avg: 5053 / Max: 5071

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare30K60K90K120K150KSE +/- 37.76, N = 3SE +/- 13.67, N = 3SE +/- 86.64, N = 3SE +/- 1489.93, N = 6SE +/- 877.80, N = 3SE +/- 91.49, N = 3SE +/- 131.84, N = 3SE +/- 22.10, N = 3SE +/- 606.00, N = 3SE +/- 1344.14, N = 36116840360380521092661333933400921211378269620795700
OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare20K40K60K80K100KMin: 61094 / Avg: 61168.33 / Max: 61217Min: 40346 / Avg: 40359.67 / Max: 40387Min: 37957 / Avg: 38052 / Max: 38225Min: 102309 / Avg: 109266.17 / Max: 112185Min: 131796 / Avg: 133393 / Max: 134823Min: 33858 / Avg: 34009 / Max: 34174Min: 20947 / Avg: 21210.67 / Max: 21344Min: 37783 / Avg: 37825.67 / Max: 37857Min: 95078 / Avg: 96207.33 / Max: 97153Min: 93386 / Avg: 95700 / Max: 98042

PHP Micro Benchmarks

Various small PHP micro-benchmarks. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPHP Micro BenchmarksTest: Zend benchASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare3691215SE +/- 0.02, N = 3SE +/- 0.02, N = 3SE +/- 0.02, N = 3SE +/- 0.02, N = 3SE +/- 0.01, N = 3SE +/- 0.04, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.05, N = 3SE +/- 0.02, N = 34.575.865.872.402.028.1210.155.883.043.00
OpenBenchmarking.orgSeconds, Fewer Is BetterPHP Micro BenchmarksTest: Zend benchASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare3691215Min: 4.54 / Avg: 4.57 / Max: 4.6Min: 5.85 / Avg: 5.86 / Max: 5.9Min: 5.85 / Avg: 5.87 / Max: 5.9Min: 2.38 / Avg: 2.4 / Max: 2.44Min: 2.01 / Avg: 2.02 / Max: 2.03Min: 8.05 / Avg: 8.12 / Max: 8.16Min: 10.14 / Avg: 10.15 / Max: 10.16Min: 5.87 / Avg: 5.88 / Max: 5.91Min: 2.95 / Avg: 3.04 / Max: 3.1Min: 2.97 / Avg: 3 / Max: 3.03

OpenBenchmarking.orgSeconds, Fewer Is BetterPHP Micro BenchmarksTest: Zend micro_benchASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare1326395265SE +/- 0.30, N = 3SE +/- 0.00, N = 3SE +/- 0.24, N = 3SE +/- 0.12, N = 3SE +/- 0.12, N = 3SE +/- 0.05, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.18, N = 12SE +/- 0.23, N = 324.1634.1834.8911.829.6941.5259.3534.1411.2211.48
OpenBenchmarking.orgSeconds, Fewer Is BetterPHP Micro BenchmarksTest: Zend micro_benchASUS Tinker BoardRaspberry Pi 3 Model A+Raspberry Pi 3 Model B+Jetson TX1Jetson TX2ODROID C1 PlusALL-H3-CC H5AML-S905X-CCODROID XU4ODROID XU4 20190713 bare1224364860Min: 23.59 / Avg: 24.16 / Max: 24.59Min: 34.17 / Avg: 34.18 / Max: 34.18Min: 34.41 / Avg: 34.89 / Max: 35.21Min: 11.65 / Avg: 11.82 / Max: 12.04Min: 9.54 / Avg: 9.69 / Max: 9.94Min: 41.42 / Avg: 41.52 / Max: 41.61Min: 59.32 / Avg: 59.35 / Max: 59.37Min: 34.12 / Avg: 34.14 / Max: 34.16Min: 10.52 / Avg: 11.22 / Max: 12.25Min: 11.14 / Avg: 11.48 / Max: 11.9

ASUS Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1024x768

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 4 December 2018 21:05 by user linaro.

Raspberry Pi 3 Model A+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model A Plus Rev 1.0, Memory: 431MB, Disk: 32GB SC32G, Graphics: BCM2708

OS: Raspbian 9.6, Kernel: 4.14.79-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1824x984

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 5 December 2018 10:14 by user pi.

Raspberry Pi 3 Model B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.6, Kernel: 4.14.79-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 5 December 2018 17:03 by user pi.

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 4096x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 6 December 2018 13:24 by user NVIDIA.

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (4 Cores / 6 Threads), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.0, Display Server: X Server 1.18.3, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609 + CUDA 9.0, File-System: ext4, Screen Resolution: 4096x4320

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Python Notes: Python 2.7.12 + Python 3.5.1+

Testing initiated at 6 December 2018 19:13 by user NVIDIA.

ODROID C1 Plus

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 7 December 2018 02:13 by user odroid.

ALL-H3-CC H5

Processor: ARMv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.6, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 7 December 2018 12:28 by user pi.

AML-S905X-CC

Processor: ARMv8 Cortex-A53 @ 1.51GHz (4 Cores), Motherboard: Libre Board AML-S905X-CC, Memory: 2048MB, Disk: 32GB SC32G

OS: Raspbian 9.6, Kernel: 4.14.53-00653-gc01abe8ba6bc (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: arm-big-little ondemand
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 7 December 2018 22:02 by user pi.

ODROID XU4

Processor: ARMv7 rev 3 @ 1.50GHz (8 Cores), Motherboard: ODROID-XU4 Hardkernel Odroid XU4, Memory: 2048MB, Disk: 16GB AJTD4R, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.37-135 (armv7l), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Kernel Notes: usbhid.quirks=0x0eef:0x0005:0x0004
Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

Testing initiated at 8 December 2018 17:51 by user odroid.

ODROID XU4 20190713 bare

Processor: ARMv7 rev 3 @ 1.50GHz (8 Cores), Motherboard: ODROID-XU4, Memory: 2048MB, Disk: 16GB AJTD4R

OS: Ubuntu 18.04, Kernel: 4.14.127-164 (armv7l), File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
System Notes: Python 2.7.15+.

Testing initiated at 13 July 2019 11:50 by user root.