Various ARM Linux Benchmarks - Spetember 2018

Various ARM board benchmarks... Tests for a future article on Phoronix.com by Michael Larabel.

Compare your own system(s) to this result file with the Phoronix Test Suite by running the command: phoronix-test-suite benchmark 1901135-SK-1809111RA40
Jump To Table - Results

View

Do Not Show Noisy Results
Do Not Show Results With Incomplete Data
Do Not Show Results With Little Change/Spread
List Notable Results

Limit displaying results to tests within:

Audio Encoding 2 Tests
C/C++ Compiler Tests 8 Tests
Compression Tests 2 Tests
CPU Massive 14 Tests
Creator Workloads 6 Tests
Database Test Suite 2 Tests
Encoding 3 Tests
Common Kernel Benchmarks 2 Tests
Multi-Core 8 Tests
Programmer / Developer System Benchmarks 3 Tests
Python 2 Tests
Renderers 3 Tests
Server 4 Tests
Server CPU Tests 8 Tests
Single-Threaded 8 Tests

Statistics

Show Overall Harmonic Mean(s)
Show Overall Geometric Mean
Show Geometric Means Per-Suite/Category
Show Wins / Losses Counts (Pie Chart)
Normalize Results
Remove Outliers Before Calculating Averages

Graph Settings

Force Line Graphs Where Applicable
Convert To Scalar Where Applicable
Prefer Vertical Bar Graphs

Additional Graphs

Show Perf Per Core/Thread Calculation Graphs Where Applicable
Show Perf Per Clock Calculation Graphs Where Applicable

Multi-Way Comparison

Condense Multi-Option Tests Into Single Result Graphs
Condense Test Profiles With Multiple Version Results Into Single Result Graphs

Table

Show Detailed System Result Table

Run Management

Highlight
Result
Hide
Result
Result
Identifier
Performance Per
Dollar
Date
Run
  Test
  Duration
ALL-H3-CC H2+
September 04 2018
  11 Hours, 9 Minutes
ALL-H3-CC H3
September 04 2018
  13 Hours, 14 Minutes
ALL-H3-CC H5
September 04 2018
  13 Hours, 49 Minutes
Banana Pi M3
September 06 2018
  6 Hours, 50 Minutes
Firefly ROC-RK3328-CC
September 03 2018
  6 Hours, 22 Minutes
Jetson TX1
September 10 2018
  5 Hours, 24 Minutes
Jetson TX2
August 28 2018
  3 Hours, 12 Minutes
ODROID-C1+
September 06 2018
  10 Hours, 14 Minutes
ODROID-C2
August 31 2018
  6 Hours
Pine64 1GB
August 31 2018
  8 Hours, 8 Minutes
Raspberry Pi 2 B
August 27 2018
  14 Hours, 22 Minutes
Raspberry Pi 3 B
August 31 2018
  9 Hours, 37 Minutes
Raspberry Pi 3 B+
August 27 2018
  7 Hours, 52 Minutes
Socionext Developerbox
August 24 2018
  5 Hours, 6 Minutes
Tinker Board
August 31 2018
  4 Hours, 10 Minutes
AML-S905X-CC 2GB
January 13 2019
  5 Hours, 45 Minutes
Invert Hiding All Results Option
  8 Hours, 12 Minutes

Only show results where is faster than
Only show results matching title/arguments (delimit multiple options with a comma):
Do not show results matching title/arguments (delimit multiple options with a comma):

ALL-H3-CC H2+

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 493MB, Disk: 32GB SC32G, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

ALL-H3-CC H3

Changed Memory to 1024MB.

Changed Disk to 32GB GB1QT.

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

AML-S905X-CC 2GB

Processor: ARMv8 Cortex-A53 @ 1.51GHz (4 Cores), Motherboard: amlogic p212 (2019.01-rc2-02349-gd3b0e919c1-dirty BIOS), Memory: 2048MB, Disk: 64GB USD00, Graphics: DRM emulated

OS: Ubuntu 18.04, Kernel: 4.19.14-01736-gab9cf1c7f085-dirty (aarch64), Compiler: GCC 7.3.0, File-System: btrfs, Screen Resolution: 720x576i

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: scpi-cpufreq performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

Various ARM Linux Benchmarks - Spetember 2018ProcessorMotherboardMemoryDiskMonitorGraphicsAudioOSKernelCompilerFile-SystemScreen ResolutionDisplay ServerDesktopDisplay DriverVulkanALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GBARMv7 rev 5 @ 0.91GHz (4 Cores)Allwinner sun8i Family Libre Board ALL-H3-CC H3493MB32GB SC32GVE228Ubuntu 18.044.14.65-sunxi (armv7l)GCC 7.3.0ext41920x10801024MB32GB GB1QTARMVv8 Cortex-A53 (4 Cores)Libre Board ALL-H3-CC H52048MBRaspbian 9.44.18.0-rc3-gfc36def997cf-dirty (aarch64)X Server 1.19.2GCC 6.3.0 20170516ARMv7 rev 5 @ 1.80GHz (8 Cores)sun8i32GB SC32G + 8GB M8G1GCPowerVRRaspbian 8.03.4.39-BPI-M3-Kernel (armv7l)LXDEX Server 1.18.4GCC 4.9.21280x720Rockchip @ 1.39GHz (4 Cores)Firefly ROC-RK3328-CC32GB GB1QTAcer P243WUbuntu 18.044.4.114 (aarch64)GCC 7.3.01920x1080p60ARMv8 rev 1 @ 1.73GHz (4 Cores)jetson_tx14096MB16GB 016G32NVIDIA TEGRAUbuntu 16.044.4.38-tegra (aarch64)Unity 7.4.5NVIDIA 1.0.01.0.8GCC 5.4.0 201606091920x1200ARMv8 rev 3 @ 2.04GHz (6 Cores)quill8192MB31GB 032G34DELL P2415Q3840x2160ARMv7 rev 1 @ 1.54GHz (4 Cores)ODROIDC804MB32GB GB1QTARM Mali3.10.107-190 (armv7l)1920x2160Amlogic @ 1.54GHz (4 Cores)ODROID-C22048MBOSDUbuntu 18.043.16.57-20 (aarch64)X Server 1.19.6GCC 7.3.01920x1200AArch64 rev 4 @ 1.15GHz (4 Cores)sun50iw1p11024MB32GB SC32GUbuntu 16.043.10.104 (aarch64)X Server 1.18.4GCC 5.4.0 201606091920x1080ARMv7 rev 5 @ 0.90GHz (4 Cores)BCM2835 Raspberry Pi 2 Model B Rev 1.1927MB32GB GB2MWBCM2708Raspbian 9.44.14.50-v7+ (armv7l)LXDEX Server 1.19.2GCC 6.3.0 201705161920x1200ARMv7 rev 4 @ 1.20GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Rev 1.232GB GB1QT4.14.62-v7+ (armv7l)656x416ARMv7 rev 4 @ 1.40GHz (4 Cores)BCM2835 Raspberry Pi 3 Model B Plus Rev 1.332GB GB2MW1920x1200Unknown (24 Cores)Socionext SynQuacer E- DeveloperBox (build #38 BIOS)32768MB8GB M32508 + 1000GB Samsung SSD 970 EVO 1TBASUS NVIDIA GeForce GT 710B 1024MBNVIDIA GK208 HDMI/DPASUS VG236Ubuntu 18.044.15.0-33-generic (aarch64)GCC 7.3.01920x1080ARMv7 rev 1 @ 1.80GHz (4 Cores)Rockchip (Device Tree)2048MB32GB GB1QTAcer P243WDebian 9.04.4.16-00006-g4431f98-dirty (armv7l)LXDEX Server 1.18.4GCC 6.3.0 20170516ARMv8 Cortex-A53 @ 1.51GHz (4 Cores)amlogic p212 (2019.01-rc2-02349-gd3b0e919c1-dirty BIOS)64GB USD00DRM emulatedUbuntu 18.044.19.14-01736-gab9cf1c7f085-dirty (aarch64)GCC 7.3.0btrfs720x576iOpenBenchmarking.orgCompiler Details- ALL-H3-CC H2+: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H3: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v- ALL-H3-CC H5: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Banana Pi M3: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v- Firefly ROC-RK3328-CC: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Jetson TX1: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Jetson TX2: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- ODROID-C1+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v- ODROID-C2: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Pine64 1GB: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v- Raspberry Pi 2 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 B: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Raspberry Pi 3 B+: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v- Socionext Developerbox: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v- Tinker Board: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v- AML-S905X-CC 2GB: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -vProcessor Details- ALL-H3-CC H2+: Scaling Governor: cpufreq-dt ondemand- ALL-H3-CC H3: Scaling Governor: cpufreq-dt ondemand- Banana Pi M3: Scaling Governor: sunxi-iks ondemand- Firefly ROC-RK3328-CC: Scaling Governor: cpufreq-dt performance- Jetson TX1: Scaling Governor: tegra-cpufreq interactive- Jetson TX2: Scaling Governor: tegra_cpufreq schedutil- ODROID-C1+: Scaling Governor: meson_cpufreq performance- ODROID-C2: Scaling Governor: meson_cpufreq performance- Pine64 1GB: Scaling Governor: cpufreq-sunxi interactive- Raspberry Pi 2 B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 B: Scaling Governor: BCM2835 Freq ondemand- Raspberry Pi 3 B+: Scaling Governor: BCM2835 Freq ondemand- Tinker Board: Scaling Governor: cpufreq-dt interactive- AML-S905X-CC 2GB: Scaling Governor: scpi-cpufreq performancePython Details- ALL-H3-CC H2+: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H3: Python 2.7.15rc1 + Python 3.6.5- ALL-H3-CC H5: Python 2.7.13 + Python 3.5.3- Banana Pi M3: Python 2.7.9 + Python 3.4.2- Firefly ROC-RK3328-CC: Python 2.7.15rc1 + Python 3.6.5- Jetson TX1: Python 2.7.12 + Python 3.5.2- Jetson TX2: Python 2.7.12 + Python 3.5.2- ODROID-C1+: Python 2.7.12 + Python 3.5.2- ODROID-C2: Python 2.7.15rc1 + Python 3.6.5- Pine64 1GB: Python 2.7.12 + Python 3.5.2- Raspberry Pi 2 B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 B: Python 2.7.13 + Python 3.5.3- Raspberry Pi 3 B+: Python 2.7.13 + Python 3.5.3- Socionext Developerbox: Python 2.7.15rc1 + Python 3.6.5- Tinker Board: Python 2.7.13 + Python 3.5.3- AML-S905X-CC 2GB: Python 2.7.15rc1 + Python 3.6.7Disk Mount Options Details- Jetson TX2: data=ordered,relatime,rw- ODROID-C2: errors=remount-ro,noatime,rw- Pine64 1GB: data=ordered,noatime,rw,stripe=1024- Raspberry Pi 2 B: data=ordered,noatime,rw- Raspberry Pi 3 B: data=ordered,noatime,rw- Raspberry Pi 3 B+: data=ordered,noatime,rw- Tinker Board: data=ordered,noatime,rwDisk Details- Socionext Developerbox: NONE / data=ordered,errors=remount-ro,relatime,rw

ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GBResult OverviewPhoronix Test Suite100%353%607%860%1113%PyBenchFLAC Audio EncodingPerl BenchmarksPHPBenchLAME MP3 EncodingTinymembenchAOBenchZstd CompressionHierarchical INTegrationC-Ray

Various ARM Linux Benchmarks - Spetember 2018tinymembench: Standard Memcpyttsiod-renderer: Phong Rendering With Soft-Shadow Mappingx264: H.264 Video Encodingcompress-7zip: Compress Speed Testc-ray: Total Time - 4K, 16 Rays Per Pixelprimesieve: 1e12 Prime Number Generationaobench: 2048 x 2048 - Total Timecompress-zstd: Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19encode-flac: WAV To FLACencode-mp3: WAV To MP3perl-benchmark: Pod2htmlperl-benchmark: Interpreterpgbench: Buffer Test - Normal Load - Read Onlypgbench: Buffer Test - Normal Load - Read Writeredis: GETredis: SETpybench: Total For Average Test Timeshint: FLOATphpbench: PHP Benchmark Suitegit: Time To Complete Common Git Commandsscikit-learn: ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB82710.731.131162416619756981407537.27535.902.273662230.0101216529409346378802662291.8391210.831.141197415619407001383537.42536.622.266156290.0101096529389346403332664287.372246133911.911301308816234911219566.38518.512.575798690.01057718547793792740680340037202132477.191515738265416698764611069279.92266.352.596381130.034732451242157988115990679353711820222115662.1219511773934289848293.37296.201.313661230.00514761297726326560818962314030611296125380240.04650386245.055.96452685140116544178.86113.140.600710340.0023586916079122248468833353563488838131311197923.664343798565067513445565.1595.910.487469040.00987031144271793660813432278535710398808713317517.5792814.151.46147727201591457978344.23331.011.731624180.00814231519934516734610056123773557298813405269.231631168823.072.8921981537599260822263.28266.801.118933610.00551193605971927154719458112775676732615917638.99664137715.732.1223429433521034352.20350.191.404496210.01025786455545625554615981020196501852043698852.6485395610.941.101125437518976671315534.59514.112.465045750.0134515538561331131116721037907359526602083697.322328129715.662.03186323571543333934387.09352.661.294479020.00842084664040921306713176424349500091353442057.19844128816.822.09179620741113290867336.07301.981.118339730.00742901652614424076115033720923579571934016551.84785154389.2812.419368391133400931390.76406.391.570880610.0065884031506416623572116005319386441503763892246.37899150227.804.4234721048192573122.05145.590.694156800.004280811330911423263512187479256807553256639826.06474209724.212.8322551592550273743275.96279.401.222434670.0049383432846322315812860646507695743437.71807OpenBenchmarking.org

Tinymembench

This benchmark tests the system memory (RAM) performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemcpyALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB8001600240032004000827912133973815663862379892816881377956129712881543150220971. (CC) gcc options: -O2 -lm

OpenBenchmarking.orgMB/s, More Is BetterTinymembench 2018-05-28Standard MemsetALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB3K6K9K12K15K2277227821931064733610374139132881360430931177173818717359419261181. (CC) gcc options: -O2 -lm

TTSIOD 3D Renderer

A portable GPL 3D software renderer that supports OpenMP and Intel Threading Building Blocks with many different rendering modes. This version does not use OpenGL but is entirely CPU/software based. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Jetson TX1ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB20406080100SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.07, N = 3SE +/- 0.06, N = 3SE +/- 0.01, N = 3SE +/- 0.05, N = 3SE +/- 0.02, N = 3SE +/- 0.25, N = 4SE +/- 0.03, N = 3SE +/- 0.07, N = 3SE +/- 0.02, N = 3SE +/- 0.04, N = 310.7310.8311.9145.0514.1523.0715.7310.9415.6616.8289.2827.8024.211. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++
OpenBenchmarking.orgFPS, More Is BetterTTSIOD 3D Renderer 2.3bPhong Rendering With Soft-Shadow MappingALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Jetson TX1ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB20406080100Min: 10.71 / Avg: 10.73 / Max: 10.74Min: 10.82 / Avg: 10.83 / Max: 10.84Min: 11.89 / Avg: 11.91 / Max: 11.92Min: 44.98 / Avg: 45.05 / Max: 45.19Min: 14.06 / Avg: 14.15 / Max: 14.27Min: 23.06 / Avg: 23.07 / Max: 23.1Min: 15.63 / Avg: 15.73 / Max: 15.79Min: 10.9 / Avg: 10.94 / Max: 10.97Min: 15.35 / Avg: 15.66 / Max: 16.41Min: 16.79 / Avg: 16.82 / Max: 16.89Min: 89.21 / Avg: 89.28 / Max: 89.41Min: 27.76 / Avg: 27.8 / Max: 27.83Min: 24.14 / Avg: 24.21 / Max: 24.281. (CXX) g++ options: -O3 -fomit-frame-pointer -ffast-math -mtune=native -flto -lSDL -fopenmp -fwhole-program -lstdc++

x264

This is a simple test of the x264 encoder run on the CPU (OpenCL support disabled) with a sample video file. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-07-28H.264 Video EncodingALL-H3-CC H2+ALL-H3-CC H3Firefly ROC-RK3328-CCJetson TX1ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB3691215SE +/- 0.00, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.06, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.01, N = 3SE +/- 0.00, N = 3SE +/- 0.01, N = 3SE +/- 0.05, N = 3SE +/- 0.00, N = 31.131.142.125.961.462.892.121.102.032.0912.414.422.831. (CC) gcc options: -ldl -lm -lpthread
OpenBenchmarking.orgFrames Per Second, More Is Betterx264 2018-07-28H.264 Video EncodingALL-H3-CC H2+ALL-H3-CC H3Firefly ROC-RK3328-CCJetson TX1ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB48121620Min: 1.13 / Avg: 1.13 / Max: 1.13Min: 1.13 / Avg: 1.14 / Max: 1.14Min: 2.11 / Avg: 2.12 / Max: 2.13Min: 5.87 / Avg: 5.96 / Max: 6.07Min: 1.45 / Avg: 1.46 / Max: 1.47Min: 2.88 / Avg: 2.89 / Max: 2.91Min: 2.11 / Avg: 2.12 / Max: 2.12Min: 1.09 / Avg: 1.1 / Max: 1.11Min: 2.01 / Avg: 2.03 / Max: 2.04Min: 2.08 / Avg: 2.09 / Max: 2.09Min: 12.39 / Avg: 12.41 / Max: 12.42Min: 4.32 / Avg: 4.42 / Max: 4.48Min: 2.82 / Avg: 2.83 / Max: 2.831. (CC) gcc options: -ldl -lm -lpthread

7-Zip Compression

This is a test of 7-Zip using p7zip with its integrated benchmark feature or upstream 7-Zip for the Windows x64 build. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB2K4K6K8K10KSE +/- 1.45, N = 3SE +/- 1.20, N = 3SE +/- 43.13, N = 9SE +/- 0.67, N = 3SE +/- 28.68, N = 3SE +/- 11.46, N = 3SE +/- 13.74, N = 3SE +/- 17.25, N = 3SE +/- 8.84, N = 3SE +/- 3.84, N = 3SE +/- 16.51, N = 3SE +/- 58.09, N = 3SE +/- 36.57, N = 3SE +/- 1.00, N = 31162119713012654195145265650147721981125186317969368347222551. (CXX) g++ options: -pipe -lpthread
OpenBenchmarking.orgMIPS, More Is Better7-Zip Compression 16.02Compress Speed TestALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB16003200480064008000Min: 1159 / Avg: 1161.67 / Max: 1164Min: 1299 / Avg: 1300.67 / Max: 1303Min: 2526 / Avg: 2654.22 / Max: 2980Min: 1950 / Avg: 1950.67 / Max: 1952Min: 4469 / Avg: 4526 / Max: 4560Min: 5628 / Avg: 5649.67 / Max: 5667Min: 1451 / Avg: 1476.67 / Max: 1498Min: 2164 / Avg: 2197.67 / Max: 2221Min: 1116 / Avg: 1125.33 / Max: 1143Min: 1857 / Avg: 1862.67 / Max: 1870Min: 1765 / Avg: 1796.33 / Max: 1821Min: 9252 / Avg: 9367.67 / Max: 9435Min: 3422 / Avg: 3471.67 / Max: 3543Min: 2254 / Avg: 2255 / Max: 22571. (CXX) g++ options: -pipe -lpthread

C-Ray

This is a test of C-Ray, a simple raytracer designed to test the floating-point CPU performance. This test is multi-threaded (16 threads per core), will shoot 8 rays per pixel for anti-aliasing, and will generate a 1600 x 1200 image. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB9001800270036004500SE +/- 6.17, N = 3SE +/- 1.59, N = 3SE +/- 5.10, N = 3SE +/- 22.18, N = 3SE +/- 10.58, N = 3SE +/- 60.87, N = 9SE +/- 60.69, N = 9SE +/- 5.34, N = 3SE +/- 0.45, N = 3SE +/- 3.98, N = 3SE +/- 6.73, N = 3SE +/- 16.16, N = 3SE +/- 2.67, N = 3SE +/- 1.67, N = 3SE +/- 5.86, N = 3SE +/- 0.77, N = 341664156308816691773851675272015372342437523572074391104815921. (CC) gcc options: -lm -lpthread -O3
OpenBenchmarking.orgSeconds, Fewer Is BetterC-Ray 1.1Total Time - 4K, 16 Rays Per PixelALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB8001600240032004000Min: 4155.66 / Avg: 4165.56 / Max: 4176.88Min: 4154.2 / Avg: 4156.48 / Max: 4159.55Min: 3082.78 / Avg: 3088.06 / Max: 3098.27Min: 1624.84 / Avg: 1669.17 / Max: 1692.73Min: 1756.01 / Avg: 1773.48 / Max: 1792.56Min: 745.27 / Avg: 850.65 / Max: 1272.23Min: 533.29 / Avg: 675.11 / Max: 1049.69Min: 2710.69 / Avg: 2719.91 / Max: 2729.17Min: 1536.59 / Avg: 1537.34 / Max: 1538.14Min: 2335.85 / Avg: 2342.43 / Max: 2349.59Min: 4361.86 / Avg: 4374.65 / Max: 4384.67Min: 2333.64 / Avg: 2357.24 / Max: 2388.15Min: 2068.68 / Avg: 2073.96 / Max: 2077.3Min: 389.1 / Avg: 391.25 / Max: 394.53Min: 1038.98 / Avg: 1048.21 / Max: 1059.09Min: 1590.48 / Avg: 1591.5 / Max: 1593.011. (CC) gcc options: -lm -lpthread -O3

Primesieve

Primesieve generates prime numbers using a highly optimized sieve of Eratosthenes implementation. Primesieve benchmarks the CPU's L1/L2 cache performance. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPrimesieve 7.11e12 Prime Number GenerationALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxAML-S905X-CC 2GB400800120016002000SE +/- 21.10, N = 3SE +/- 15.03, N = 3SE +/- 19.70, N = 9SE +/- 13.52, N = 5SE +/- 15.71, N = 3SE +/- 15.34, N = 9SE +/- 31.20, N = 3SE +/- 3.10, N = 3SE +/- 14.59, N = 5SE +/- 5.62, N = 3SE +/- 21.17, N = 5SE +/- 11.17, N = 3SE +/- 0.13, N = 3SE +/- 4.40, N = 319751940162387693440115915999431897154311131335501. (CXX) g++ options: -O3 -lpthread
OpenBenchmarking.orgSeconds, Fewer Is BetterPrimesieve 7.11e12 Prime Number GenerationALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxAML-S905X-CC 2GB30060090012001500Min: 1936.16 / Avg: 1975.16 / Max: 2008.62Min: 1923.78 / Avg: 1939.68 / Max: 1969.73Min: 1548.69 / Avg: 1623.01 / Max: 1748.39Min: 843.85 / Avg: 875.71 / Max: 923.44Min: 909.1 / Avg: 934.06 / Max: 963.08Min: 322.25 / Avg: 401.14 / Max: 459.38Min: 1538.49 / Avg: 1591.16 / Max: 1646.48Min: 594.74 / Avg: 598.64 / Max: 604.77Min: 898.46 / Avg: 943.1 / Max: 975.63Min: 1887.73 / Avg: 1897.22 / Max: 1907.18Min: 1477.85 / Avg: 1543.37 / Max: 1609.91Min: 1095 / Avg: 1113.42 / Max: 1133.57Min: 132.63 / Avg: 132.86 / Max: 133.08Min: 542.91 / Avg: 550.06 / Max: 558.081. (CXX) g++ options: -O3 -lpthread

AOBench

AOBench is a lightweight ambient occlusion renderer, written in C. The test profile is using a size of 2048 x 2048. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB150300450600750SE +/- 0.03, N = 3SE +/- 0.21, N = 3SE +/- 1.23, N = 3SE +/- 5.31, N = 3SE +/- 0.18, N = 3SE +/- 0.11, N = 3SE +/- 0.07, N = 3SE +/- 2.17, N = 3SE +/- 0.05, N = 3SE +/- 0.24, N = 3SE +/- 0.55, N = 3SE +/- 0.44, N = 3SE +/- 3.87, N = 6SE +/- 0.28, N = 3SE +/- 0.05, N = 3SE +/- 0.13, N = 36987004914612891651344572603526673332904001922731. (CC) gcc options: -lm -O3
OpenBenchmarking.orgSeconds, Fewer Is BetterAOBenchSize: 2048 x 2048 - Total TimeALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB120240360480600Min: 698.35 / Avg: 698.4 / Max: 698.44Min: 699.35 / Avg: 699.76 / Max: 700.05Min: 489.25 / Avg: 490.95 / Max: 493.34Min: 453.65 / Avg: 461.09 / Max: 471.38Min: 288.83 / Avg: 289.12 / Max: 289.43Min: 165.12 / Avg: 165.28 / Max: 165.49Min: 133.69 / Avg: 133.79 / Max: 133.93Min: 453.09 / Avg: 456.84 / Max: 460.6Min: 259.6 / Avg: 259.69 / Max: 259.79Min: 351.3 / Avg: 351.6 / Max: 352.06Min: 666.71 / Avg: 667.31 / Max: 668.42Min: 332.64 / Avg: 333.14 / Max: 334.02Min: 285.17 / Avg: 290.12 / Max: 309.23Min: 399.65 / Avg: 400 / Max: 400.56Min: 192.21 / Avg: 192.26 / Max: 192.36Min: 272.75 / Avg: 272.89 / Max: 273.151. (CC) gcc options: -lm -O3

Zstd Compression

This test measures the time needed to compress a sample file (an Ubuntu file-system image) using Zstd compression. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB30060090012001500SE +/- 1.50, N = 3SE +/- 0.40, N = 3SE +/- 1.72, N = 3SE +/- 3.00, N = 3SE +/- 2.33, N = 3SE +/- 1.94, N = 3SE +/- 0.02, N = 3SE +/- 6.01, N = 3SE +/- 1.06, N = 3SE +/- 0.98, N = 3SE +/- 6.35, N = 3SE +/- 0.31, N = 3SE +/- 0.57, N = 3SE +/- 2.72, N = 3SE +/- 0.74, N = 3SE +/- 0.37, N = 3140713831219106984844145597882210341315934867931573743-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma-llzma1. (CC) gcc options: -O3 -pthread -lz
OpenBenchmarking.orgSeconds, Fewer Is BetterZstd Compression 1.3.4Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB2004006008001000Min: 1405.05 / Avg: 1406.6 / Max: 1409.61Min: 1382.74 / Avg: 1383.26 / Max: 1384.04Min: 1217.12 / Avg: 1219.28 / Max: 1222.68Min: 1063.26 / Avg: 1068.79 / Max: 1073.59Min: 843.22 / Avg: 847.69 / Max: 851.05Min: 437.58 / Avg: 440.75 / Max: 444.27Min: 454.67 / Avg: 454.72 / Max: 454.75Min: 965.98 / Avg: 977.98 / Max: 984.69Min: 820.21 / Avg: 822.32 / Max: 823.48Min: 1031.94 / Avg: 1033.77 / Max: 1035.29Min: 1306.18 / Avg: 1315.45 / Max: 1327.61Min: 933.44 / Avg: 933.95 / Max: 934.5Min: 866.05 / Avg: 867.15 / Max: 867.96Min: 927.83 / Avg: 931.27 / Max: 936.63Min: 571.73 / Avg: 572.7 / Max: 574.16Min: 742.09 / Avg: 742.8 / Max: 743.361. (CC) gcc options: -O3 -pthread -lz

FLAC Audio Encoding

This test times how long it takes to encode a sample WAV file to FLAC format five times. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB120240360480600SE +/- 0.65, N = 5SE +/- 0.68, N = 5SE +/- 0.29, N = 5SE +/- 1.17, N = 5SE +/- 1.63, N = 5SE +/- 0.39, N = 5SE +/- 0.17, N = 5SE +/- 1.72, N = 5SE +/- 1.35, N = 5SE +/- 0.17, N = 5SE +/- 2.05, N = 5SE +/- 0.55, N = 5SE +/- 0.93, N = 5SE +/- 0.03, N = 5SE +/- 1.28, N = 5SE +/- 0.80, N = 5537.27537.42566.38279.92293.3778.8665.15344.23263.28352.20534.59387.09336.07390.76122.05275.96-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg-logg1. (CXX) g++ options: -O2 -fvisibility=hidden -lm
OpenBenchmarking.orgSeconds, Fewer Is BetterFLAC Audio Encoding 1.3.2WAV To FLACALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB100200300400500Min: 536.11 / Avg: 537.27 / Max: 539.82Min: 535.76 / Avg: 537.42 / Max: 539.82Min: 565.43 / Avg: 566.38 / Max: 567.13Min: 276.27 / Avg: 279.92 / Max: 283.17Min: 288.72 / Avg: 293.37 / Max: 297.93Min: 77.49 / Avg: 78.86 / Max: 79.45Min: 64.63 / Avg: 65.15 / Max: 65.58Min: 340.33 / Avg: 344.23 / Max: 350.39Min: 260.85 / Avg: 263.28 / Max: 268.23Min: 351.82 / Avg: 352.2 / Max: 352.84Min: 531.07 / Avg: 534.59 / Max: 542.22Min: 385.98 / Avg: 387.09 / Max: 389.17Min: 333.48 / Avg: 336.07 / Max: 338.95Min: 390.69 / Avg: 390.76 / Max: 390.83Min: 118.97 / Avg: 122.05 / Max: 125.06Min: 273.6 / Avg: 275.96 / Max: 277.991. (CXX) g++ options: -O2 -fvisibility=hidden -lm

LAME MP3 Encoding

LAME is an MP3 encoder licensed under the LGPL. This test measures the time required to encode a WAV file to MP3 format. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB120240360480600SE +/- 0.29, N = 3SE +/- 0.28, N = 3SE +/- 0.09, N = 3SE +/- 2.53, N = 3SE +/- 0.24, N = 3SE +/- 0.15, N = 3SE +/- 0.11, N = 3SE +/- 0.99, N = 3SE +/- 2.55, N = 3SE +/- 0.11, N = 3SE +/- 0.40, N = 3SE +/- 0.10, N = 3SE +/- 0.49, N = 3SE +/- 0.07, N = 3SE +/- 0.06, N = 3SE +/- 0.05, N = 3535.90536.62518.51266.35296.20113.1495.91331.01266.80350.19514.11352.66301.98406.39145.59279.40-lncurses1. (CC) gcc options: -lm
OpenBenchmarking.orgSeconds, Fewer Is BetterLAME MP3 Encoding 3.100WAV To MP3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB90180270360450Min: 535.39 / Avg: 535.9 / Max: 536.4Min: 536.06 / Avg: 536.62 / Max: 536.98Min: 518.34 / Avg: 518.51 / Max: 518.66Min: 263.29 / Avg: 266.35 / Max: 271.37Min: 295.75 / Avg: 296.2 / Max: 296.57Min: 112.88 / Avg: 113.14 / Max: 113.41Min: 95.73 / Avg: 95.91 / Max: 96.09Min: 329.43 / Avg: 331.01 / Max: 332.82Min: 264.06 / Avg: 266.8 / Max: 271.89Min: 349.98 / Avg: 350.19 / Max: 350.37Min: 513.5 / Avg: 514.11 / Max: 514.87Min: 352.5 / Avg: 352.66 / Max: 352.84Min: 301 / Avg: 301.98 / Max: 302.52Min: 406.29 / Avg: 406.39 / Max: 406.54Min: 145.49 / Avg: 145.59 / Max: 145.68Min: 279.3 / Avg: 279.4 / Max: 279.461. (CC) gcc options: -lm

Perl Benchmarks

Perl benchmark suite that can be used to compare the relative speed of different versions of perl. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB0.58421.16841.75262.33682.921SE +/- 0.00906752, N = 3SE +/- 0.00913039, N = 3SE +/- 0.01160841, N = 3SE +/- 0.02860806, N = 3SE +/- 0.01051258, N = 3SE +/- 0.00322779, N = 3SE +/- 0.00383151, N = 3SE +/- 0.06022970, N = 6SE +/- 0.02171209, N = 3SE +/- 0.00496104, N = 3SE +/- 0.04245993, N = 9SE +/- 0.00473476, N = 3SE +/- 0.01837187, N = 4SE +/- 0.00683757, N = 3SE +/- 0.00065111, N = 3SE +/- 0.00698763, N = 32.273662232.266156292.575798692.596381131.313661230.600710340.487469041.731624181.118933611.404496212.465045751.294479021.118339731.570880610.694156801.22243467
OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: Pod2htmlALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB246810Min: 2.26 / Avg: 2.27 / Max: 2.29Min: 2.25 / Avg: 2.27 / Max: 2.28Min: 2.55 / Avg: 2.58 / Max: 2.59Min: 2.57 / Avg: 2.6 / Max: 2.65Min: 1.29 / Avg: 1.31 / Max: 1.33Min: 0.59 / Avg: 0.6 / Max: 0.6Min: 0.48 / Avg: 0.49 / Max: 0.5Min: 1.57 / Avg: 1.73 / Max: 1.93Min: 1.08 / Avg: 1.12 / Max: 1.16Min: 1.4 / Avg: 1.4 / Max: 1.41Min: 2.27 / Avg: 2.47 / Max: 2.65Min: 1.29 / Avg: 1.29 / Max: 1.3Min: 1.09 / Avg: 1.12 / Max: 1.17Min: 1.56 / Avg: 1.57 / Max: 1.58Min: 0.69 / Avg: 0.69 / Max: 0.7Min: 1.22 / Avg: 1.22 / Max: 1.24

OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB0.00780.01560.02340.03120.039SE +/- 0.00001117, N = 3SE +/- 0.00003080, N = 3SE +/- 0.00001343, N = 3SE +/- 0.00011530, N = 3SE +/- 0.00002586, N = 3SE +/- 0.00001414, N = 3SE +/- 0.00012375, N = 3SE +/- 0.00000666, N = 3SE +/- 0.00001616, N = 3SE +/- 0.00011141, N = 3SE +/- 0.00021832, N = 3SE +/- 0.00021052, N = 11SE +/- 0.00021301, N = 12SE +/- 0.00001488, N = 3SE +/- 0.00014579, N = 12SE +/- 0.00000311, N = 30.010121650.010109650.010577180.034732450.005147610.002358690.009870310.008142310.005511930.010257860.013451550.008420840.007429010.006588400.004280810.00493834
OpenBenchmarking.orgSeconds, Fewer Is BetterPerl BenchmarksTest: InterpreterALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB12345Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0.03 / Avg: 0.03 / Max: 0.03Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0 / Avg: 0 / Max: 0Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0.01 / Avg: 0.01 / Max: 0.01Min: 0 / Avg: 0 / Max: 0.01Min: 0 / Avg: 0 / Max: 0

PostgreSQL pgbench

This is a simple benchmark of PostgreSQL using pgbench. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyFirefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker Board7K14K21K28K35KSE +/- 8.74, N = 3SE +/- 112.24, N = 3SE +/- 29.83, N = 3SE +/- 17.10, N = 3SE +/- 103.97, N = 4SE +/- 9.36, N = 3SE +/- 57.37, N = 3SE +/- 61.95, N = 3SE +/- 115.45, N = 3SE +/- 64.76, N = 3SE +/- 143.40, N = 32977160791442751996059455538566640652631506133091. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm
OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyFirefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker Board5K10K15K20K25KMin: 2959.37 / Avg: 2976.8 / Max: 2986.71Min: 15936.98 / Avg: 16078.65 / Max: 16300.28Min: 14376.69 / Avg: 14426.54 / Max: 14479.86Min: 5172.93 / Avg: 5199.05 / Max: 5231.22Min: 5783.27 / Avg: 6059.32 / Max: 6226.34Min: 4536.21 / Avg: 4554.89 / Max: 4565.39Min: 3762.74 / Avg: 3856.36 / Max: 3960.61Min: 6561.27 / Avg: 6640.3 / Max: 6762.45Min: 6396.35 / Avg: 6526.19 / Max: 6756.47Min: 31394.36 / Avg: 31505.7 / Max: 31618.69Min: 13035.52 / Avg: 13309.42 / Max: 13520.011. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteFirefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker Board9001800270036004500SE +/- 8.44, N = 12SE +/- 11.36, N = 3SE +/- 17.07, N = 3SE +/- 9.10, N = 12SE +/- 26.05, N = 12SE +/- 3.93, N = 3SE +/- 1.32, N = 3SE +/- 6.52, N = 12SE +/- 1.99, N = 6SE +/- 1.88, N = 3SE +/- 34.75, N = 1226312221793345719456133409144416611421. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm
OpenBenchmarking.orgTPS, More Is BetterPostgreSQL pgbench 10.3Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteFirefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker Board7001400210028003500Min: 206.36 / Avg: 263.4 / Max: 299.74Min: 1208.76 / Avg: 1222.44 / Max: 1244.98Min: 1760.75 / Avg: 1792.61 / Max: 1819.15Min: 292.33 / Avg: 344.86 / Max: 389.03Min: 463.9 / Avg: 719.27 / Max: 814.56Min: 448.73 / Avg: 456.18 / Max: 462.05Min: 130.43 / Avg: 132.78 / Max: 134.99Min: 345.4 / Avg: 409.32 / Max: 435.04Min: 135.82 / Avg: 144.12 / Max: 147.42Min: 4162.69 / Avg: 4166.34 / Max: 4168.95Min: 933.15 / Avg: 1141.84 / Max: 1265.391. (CC) gcc options: -fno-strict-aliasing -fwrapv -O2 -lpgcommon -lpgport -lpq -lpthread -lrt -lcrypt -ldl -lm

Redis

Redis is an open-source data structure server. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB140K280K420K560K700KSE +/- 336.63, N = 3SE +/- 1833.04, N = 3SE +/- 3573.20, N = 6SE +/- 2915.59, N = 3SE +/- 2540.60, N = 3SE +/- 1992.94, N = 12SE +/- 777.10, N = 3SE +/- 3541.46, N = 3SE +/- 1911.33, N = 3SE +/- 1229.44, N = 3SE +/- 1090.67, N = 3SE +/- 2599.96, N = 3SE +/- 4435.65, N = 3SE +/- 5148.09, N = 3547791242152656084846886608131673462715472555461131112130672407612357213263513284631. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread
OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: GETALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB110K220K330K440K550KMin: 54303.55 / Avg: 54778.63 / Max: 55429.3Min: 122234.45 / Avg: 124215.23 / Max: 127877.23Min: 248756.22 / Avg: 265608.25 / Max: 273522.97Min: 479616.31 / Avg: 484687.74 / Max: 489715.94Min: 655737.69 / Avg: 660812.54 / Max: 663570Min: 154487.88 / Avg: 167345.86 / Max: 175870.56Min: 270343.34 / Avg: 271546.79 / Max: 273000.25Min: 251509.05 / Avg: 255546.44 / Max: 262605.03Min: 109517.03 / Avg: 113110.61 / Max: 116036.2Min: 211416.48 / Avg: 213067.17 / Max: 215470.81Min: 238948.62 / Avg: 240761.01 / Max: 242718.45Min: 230893.56 / Avg: 235721.41 / Max: 239808.16Min: 317561.12 / Avg: 326350.89 / Max: 331785Min: 318167.38 / Avg: 328463.37 / Max: 3336671. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB90K180K270K360K450KSE +/- 313.11, N = 3SE +/- 1043.53, N = 3SE +/- 335.35, N = 3SE +/- 3890.46, N = 3SE +/- 436.19, N = 3SE +/- 1526.07, N = 5SE +/- 2273.51, N = 3SE +/- 1081.64, N = 3SE +/- 744.95, N = 3SE +/- 881.60, N = 3SE +/- 677.69, N = 3SE +/- 368.39, N = 3SE +/- 2798.54, N = 3SE +/- 1741.76, N = 33792779881189623333535432278100561194581159810672101317641503371600532187472231581. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread
OpenBenchmarking.orgRequests Per Second, More Is BetterRedis 4.0.8Test: SETALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB70K140K210K280K350KMin: 37306.47 / Avg: 37927.09 / Max: 38309.77Min: 77833.12 / Avg: 79880.64 / Max: 81254.57Min: 189000.19 / Avg: 189622.58 / Max: 190150.22Min: 327546.69 / Avg: 333534.74 / Max: 340831.62Min: 431592.59 / Avg: 432277.54 / Max: 433087.91Min: 96655.72 / Avg: 100561.1 / Max: 105954.66Min: 190114.06 / Avg: 194580.96 / Max: 197550.39Min: 157703.83 / Avg: 159810.18 / Max: 161290.33Min: 66326.2 / Avg: 67210.11 / Max: 68690.76Min: 130005.2 / Avg: 131764.18 / Max: 132749.23Min: 149253.73 / Avg: 150336.83 / Max: 151584.05Min: 159489.64 / Avg: 160052.92 / Max: 160745.86Min: 213310.58 / Avg: 218747.13 / Max: 222617.98Min: 220215.81 / Avg: 223158.44 / Max: 226244.341. (CC) gcc options: -ggdb -rdynamic -lm -ldl -pthread

PyBench

This test profile reports the total time of the different average timed test results from PyBench. PyBench reports average test times for different functions such as BuiltinFunctionCalls and NestedForLoops, with this total result providing a rough estimate as to Python's average performance on a given system. This test profile runs PyBench each time for 20 rounds. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB9K18K27K36K45KSE +/- 50.90, N = 3SE +/- 35.56, N = 3SE +/- 54.78, N = 3SE +/- 60.92, N = 3SE +/- 46.73, N = 3SE +/- 21.11, N = 3SE +/- 16.86, N = 3SE +/- 37.03, N = 3SE +/- 167.68, N = 3SE +/- 32.08, N = 3SE +/- 51.49, N = 3SE +/- 25.83, N = 3SE +/- 85.92, N = 3SE +/- 13.74, N = 3SE +/- 16.41, N = 3SE +/- 20.88, N = 329409293894068015990140306348535723773127752019637907243492092319386925612860
OpenBenchmarking.orgMilliseconds, Fewer Is BetterPyBench 2018-02-16Total For Average Test TimesALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB7K14K21K28K35KMin: 29339 / Avg: 29409 / Max: 29508Min: 29347 / Avg: 29389.33 / Max: 29460Min: 40573 / Avg: 40680.33 / Max: 40753Min: 15886 / Avg: 15990.33 / Max: 16097Min: 13954 / Avg: 14029.67 / Max: 14115Min: 6313 / Avg: 6348.33 / Max: 6386Min: 5323 / Avg: 5356.67 / Max: 5375Min: 23700 / Avg: 23773.33 / Max: 23819Min: 12604 / Avg: 12774.67 / Max: 13110Min: 20133 / Avg: 20196 / Max: 20238Min: 37849 / Avg: 37907.33 / Max: 38010Min: 24300 / Avg: 24348.67 / Max: 24388Min: 20801 / Avg: 20923.33 / Max: 21089Min: 19360 / Avg: 19385.67 / Max: 19407Min: 9224 / Avg: 9255.67 / Max: 9279Min: 12837 / Avg: 12860.33 / Max: 12902

Hierarchical INTegration

This test runs the U.S. Department of Energy's Ames Laboratory Hierarchical INTegration (HINT) benchmark. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgQUIPs, More Is BetterHierarchical INTegration 1.0Test: FLOATALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB20M40M60M80M100MSE +/- 1621.71, N = 3SE +/- 1696.71, N = 3SE +/- 9829.94, N = 3SE +/- 132627.22, N = 3SE +/- 19531.90, N = 3SE +/- 466387.18, N = 3SE +/- 187708.64, N = 3SE +/- 359364.97, N = 3SE +/- 19085.92, N = 3SE +/- 27122.74, N = 3SE +/- 113633.28, N = 3SE +/- 73922.97, N = 3SE +/- 271590.74, N = 3SE +/- 3286.77, N = 3SE +/- 3664.18, N = 3SE +/- 21504.77, N = 33463788034640333340037206793537161129612883813131039880875572988167673261501852043595266050009135579571934415037680755325646507691. (CC) gcc options: -O3 -march=native -lm
OpenBenchmarking.orgQUIPs, More Is BetterHierarchical INTegration 1.0Test: FLOATALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB20M40M60M80M100MMin: 34634737.15 / Avg: 34637880.34 / Max: 34640144.87Min: 34637962.12 / Avg: 34640333 / Max: 34643620.97Min: 33986489.09 / Avg: 34003720.34 / Max: 34020533.29Min: 67670166.14 / Avg: 67935371.1 / Max: 68072410.9Min: 61090588.63 / Avg: 61129611.77 / Max: 61150666.29Min: 87448554.92 / Avg: 88381313.02 / Max: 88852462.25Min: 103698735.56 / Avg: 103988086.57 / Max: 104339910.81Min: 55012140.68 / Avg: 55729880.68 / Max: 56121408.12Min: 67645922.56 / Avg: 67673261.41 / Max: 67710001.55Min: 50131208.44 / Avg: 50185204.4 / Max: 50216703.05Min: 35746623.19 / Avg: 35952660.43 / Max: 36138739.63Min: 49864112.37 / Avg: 50009135.34 / Max: 50106548Min: 57667912 / Avg: 57957192.61 / Max: 58499981.31Min: 44143895.44 / Avg: 44150375.92 / Max: 44154570.68Min: 80748034.13 / Avg: 80755325.37 / Max: 80759608.91Min: 64616537.59 / Avg: 64650769.4 / Max: 64690435.321. (CC) gcc options: -O3 -march=native -lm

PHPBench

PHPBench is a benchmark suite for PHP. It performs a large number of simple tests in order to bench various aspects of the PHP interpreter. PHPBench can be used to compare hardware, operating systems, PHP versions, PHP accelerators and caches, compiler options, etc. The number of iterations used is 1,000,000. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB30K60K90K120K150KSE +/- 26.01, N = 3SE +/- 27.36, N = 3SE +/- 7.80, N = 3SE +/- 84.14, N = 3SE +/- 238.66, N = 3SE +/- 1075.34, N = 3SE +/- 871.71, N = 3SE +/- 82.63, N = 3SE +/- 287.89, N = 3SE +/- 17.90, N = 3SE +/- 141.51, N = 3SE +/- 58.48, N = 3SE +/- 65.58, N = 3SE +/- 16.44, N = 3SE +/- 222.05, N = 3SE +/- 39.54, N = 32662226642213241820253802111979133175340525917636988208363442040165389226639857434
OpenBenchmarking.orgScore, More Is BetterPHPBench 0.8.1PHP Benchmark SuiteALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB20K40K60K80K100KMin: 26595 / Avg: 26622 / Max: 26674Min: 26587 / Avg: 26641.67 / Max: 26671Min: 21311 / Avg: 21324.33 / Max: 21338Min: 18061 / Avg: 18201.67 / Max: 18352Min: 53326 / Avg: 53802.33 / Max: 54067Min: 109952 / Avg: 111979 / Max: 113615Min: 131647 / Avg: 133175.33 / Max: 134666Min: 33906 / Avg: 34052.33 / Max: 34192Min: 58743 / Avg: 59175.67 / Max: 59721Min: 36953 / Avg: 36988 / Max: 37012Min: 20609 / Avg: 20836.33 / Max: 21096Min: 34344 / Avg: 34420 / Max: 34535Min: 40041 / Avg: 40165 / Max: 40264Min: 38891 / Avg: 38922 / Max: 38947Min: 65963 / Avg: 66398 / Max: 66693Min: 57371 / Avg: 57434.33 / Max: 57507

Git

This test measures the time needed to carry out some sample Git operations on an example, static repository that happens to be a copy of the GNOME GTK tool-kit repository. Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterGitTime To Complete Common Git CommandsALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB20406080100SE +/- 0.78, N = 3SE +/- 1.30, N = 12SE +/- 1.24, N = 12SE +/- 0.91, N = 12SE +/- 0.67, N = 12SE +/- 0.20, N = 3SE +/- 0.83, N = 12SE +/- 1.18, N = 12SE +/- 0.83, N = 3SE +/- 1.28, N = 12SE +/- 1.07, N = 3SE +/- 1.49, N = 12SE +/- 0.01, N = 3SE +/- 0.68, N = 12SE +/- 1.08, N = 1291.8387.3777.1940.0423.6617.5769.2338.9952.6497.3257.1951.8446.3726.0637.711. ALL-H3-CC H2+: git version 2.17.12. ALL-H3-CC H3: git version 2.17.13. ALL-H3-CC H5: git version 2.11.04. Firefly ROC-RK3328-CC: git version 2.17.15. Jetson TX1: git version 2.7.46. Jetson TX2: git version 2.7.47. ODROID-C1+: git version 2.7.48. ODROID-C2: git version 2.17.19. Pine64 1GB: git version 2.7.410. Raspberry Pi 2 B: git version 2.11.011. Raspberry Pi 3 B: git version 2.11.012. Raspberry Pi 3 B+: git version 2.11.013. Socionext Developerbox: git version 2.17.114. Tinker Board: git version 2.11.015. AML-S905X-CC 2GB: git version 2.17.1
OpenBenchmarking.orgSeconds, Fewer Is BetterGitTime To Complete Common Git CommandsALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB20406080100Min: 90.63 / Avg: 91.83 / Max: 93.29Min: 76.75 / Avg: 87.37 / Max: 93.48Min: 74.28 / Avg: 77.19 / Max: 86.28Min: 37.37 / Avg: 40.04 / Max: 46.28Min: 20.33 / Avg: 23.66 / Max: 28.94Min: 17.33 / Avg: 17.57 / Max: 17.97Min: 65.81 / Avg: 69.23 / Max: 77.08Min: 33.98 / Avg: 38.99 / Max: 49.1Min: 51.74 / Avg: 52.64 / Max: 54.3Min: 89.11 / Avg: 97.32 / Max: 103.77Min: 55.27 / Avg: 57.19 / Max: 58.96Min: 43.92 / Avg: 51.84 / Max: 59.21Min: 46.36 / Avg: 46.37 / Max: 46.38Min: 24.46 / Avg: 26.06 / Max: 32.06Min: 35.63 / Avg: 37.71 / Max: 46.021. ALL-H3-CC H2+: git version 2.17.12. ALL-H3-CC H3: git version 2.17.13. ALL-H3-CC H5: git version 2.11.04. Firefly ROC-RK3328-CC: git version 2.17.15. Jetson TX1: git version 2.7.46. Jetson TX2: git version 2.7.47. ODROID-C1+: git version 2.7.48. ODROID-C2: git version 2.17.19. Pine64 1GB: git version 2.7.410. Raspberry Pi 2 B: git version 2.11.011. Raspberry Pi 3 B: git version 2.11.012. Raspberry Pi 3 B+: git version 2.11.013. Socionext Developerbox: git version 2.17.114. Tinker Board: git version 2.11.015. AML-S905X-CC 2GB: git version 2.17.1

Scikit-Learn

Scikit-learn is a Python module for machine learning Learn more via the OpenBenchmarking.org test page.

OpenBenchmarking.orgSeconds, Fewer Is BetterScikit-Learn 0.17.1ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB5001000150020002500SE +/- 1.01, N = 3SE +/- 1.25, N = 3SE +/- 0.29, N = 3SE +/- 1.06, N = 3SE +/- 1.69, N = 3SE +/- 2.27, N = 3SE +/- 1.01, N = 3SE +/- 0.51, N = 3SE +/- 7.83, N = 3SE +/- 0.80, N = 3SE +/- 1.26, N = 3SE +/- 0.74, N = 3SE +/- 1.43, N = 3SE +/- 2.97, N = 32246151522165043416316648532328844785899474807
OpenBenchmarking.orgSeconds, Fewer Is BetterScikit-Learn 0.17.1ALL-H3-CC H3ALL-H3-CC H5Banana Pi M3Firefly ROC-RK3328-CCJetson TX1ODROID-C1+ODROID-C2Pine64 1GBRaspberry Pi 2 BRaspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB400800120016002000Min: 2244.29 / Avg: 2245.93 / Max: 2247.78Min: 1512.61 / Avg: 1515.11 / Max: 1516.47Min: 220.79 / Avg: 221.36 / Max: 221.77Min: 648.3 / Avg: 650.33 / Max: 651.86Min: 431.64 / Avg: 434.26 / Max: 437.42Min: 1626.12 / Avg: 1630.62 / Max: 1633.48Min: 663.2 / Avg: 664.49 / Max: 666.48Min: 851.49 / Avg: 852.5 / Max: 853.06Min: 2312.16 / Avg: 2327.8 / Max: 2336.46Min: 842.5 / Avg: 843.64 / Max: 845.17Min: 782.54 / Avg: 784.58 / Max: 786.89Min: 897.44 / Avg: 898.73 / Max: 900.01Min: 471.23 / Avg: 473.51 / Max: 476.14Min: 803.48 / Avg: 806.94 / Max: 812.86

Tinymembench

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterTinymembench 2018-05-28Performance / Cost - Standard MemcpyALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker Board91827364533.0830.4033.4831.328.106.9118.9426.8137.0732.381.2926.421. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.

TTSIOD 3D Renderer

OpenBenchmarking.orgFPS Per Dollar, More Is BetterTTSIOD 3D Renderer 2.3bPerformance / Cost - Phong Rendering With Soft-Shadow MappingALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Jetson TX1ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB0.13730.27460.41190.54920.68650.430.360.300.090.290.370.450.420.070.490.611. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Jetson TX1: $476.99 reported cost.5. ODROID-C1+: $49.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. Raspberry Pi 3 B: $34.99 reported cost.8. Raspberry Pi 3 B+: $39.78 reported cost.9. Socionext Developerbox: $1200.00 reported cost.10. Tinker Board: $56.85 reported cost.11. AML-S905X-CC 2GB: $40 reported cost.

x264

OpenBenchmarking.orgFrames Per Second Per Dollar, More Is Betterx264 2018-07-28Performance / Cost - H.264 Video EncodingALL-H3-CC H2+ALL-H3-CC H3Firefly ROC-RK3328-CCJetson TX1ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB0.0180.0360.0540.0720.090.050.040.040.010.030.050.060.050.010.080.071. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. Firefly ROC-RK3328-CC: $50.00 reported cost.4. Jetson TX1: $476.99 reported cost.5. ODROID-C1+: $49.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. Raspberry Pi 3 B: $34.99 reported cost.8. Raspberry Pi 3 B+: $39.78 reported cost.9. Socionext Developerbox: $1200.00 reported cost.10. Tinker Board: $56.85 reported cost.11. AML-S905X-CC 2GB: $40 reported cost.

7-Zip Compression

OpenBenchmarking.orgMIPS Per Dollar, More Is Better7-Zip Compression 16.02Performance / Cost - Compress Speed TestALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB142842567046.4839.9032.5339.029.4910.2730.1434.9253.2445.157.8161.0756.381. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

C-Ray

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterC-Ray 1.1Performance / Cost - Total Time - 4K, 16 Rays Per PixelALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB100K200K300K400K500K104150.00124680.00123520.0088650.00405918.49371243.25133280.0096754.1582471.4382503.72469200.0059578.8063660.001. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

Primesieve

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPrimesieve 7.1Performance / Cost - 1e12 Prime Number GenerationALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxAML-S905X-CC 2GB40K80K120K160K200K49375.0058200.0064920.0046700.00191272.9977959.0037707.0553989.5744275.14159600.0022002.401. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. ODROID-C1+: $49.00 reported cost.7. ODROID-C2: $62.95 reported cost.8. Raspberry Pi 3 B: $34.99 reported cost.9. Raspberry Pi 3 B+: $39.78 reported cost.10. Socionext Developerbox: $1200.00 reported cost.11. AML-S905X-CC 2GB: $40 reported cost.

AOBench

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterAOBenchPerformance / Cost - Size: 2048 x 2048 - Total TimeALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB100K200K300K400K500K17450.0021000.0019640.0014450.0078703.3573698.6622393.0016367.0011651.6711536.20480000.0010915.2010915.601. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

Zstd Compression

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterZstd Compression 1.3.4Performance / Cost - Compressing ubuntu-16.04.3-server-i386.img, Compression Level 19ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB200K400K600K800K1000K35175.0041490.0048760.0042400.00210352.59250245.4547922.0051744.9032680.6634489.261117200.0032575.0529712.001. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

FLAC Audio Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterFLAC Audio Encoding 1.3.2Performance / Cost - WAV To FLACALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB100K200K300K400K500K13431.7516122.6022655.2014668.5037615.4335831.8516867.2716573.4813544.2813368.86468912.006938.5411038.401. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

LAME MP3 Encoding

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterLAME MP3 Encoding 3.100Performance / Cost - WAV To MP3ALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB100K200K300K400K500K13397.5016098.6020740.4014810.0053966.6552749.5416219.4916795.0612339.5712012.76487668.008276.7911176.001. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

Perl Benchmarks

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: Pod2htmlALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB40080012001600200056.8467.98103.0365.68286.53268.1084.8570.4445.2944.491885.0639.4648.901. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterPerl BenchmarksPerformance / Cost - Test: InterpreterALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB2468100.250.300.420.261.135.430.400.350.290.307.910.240.201. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

PyBench

OpenBenchmarking.orgMilliseconds x Dollar, Fewer Is BetterPyBench 2018-02-16Performance / Cost - Total For Average Test TimesALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB5M10M15M20M25M735225.00881670.001627200.00701500.003027932.522946296.431164877.00804186.25851971.51832316.9423263200.00526203.60514400.001. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

Hierarchical INTegration

OpenBenchmarking.orgQUIPs Per Dollar, More Is BetterHierarchical INTegration 1.0Performance / Cost - Test: FLOATALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB300K600K900K1200K1500K1385515.201154677.77850093.001222592.24185289.66189072.691137344.511075031.951429240.781456943.0136791.981420498.241616269.241. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

PHPBench

OpenBenchmarking.orgScore Per Dollar, More Is BetterPHPBench 0.8.1Performance / Cost - PHP Benchmark SuiteALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB300600900120015001064.88888.07533.101076.04234.76242.14694.94940.05983.711009.6832.441167.951435.851. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

Git

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterGitPerformance / Cost - Time To Complete Common Git CommandsALL-H3-CC H2+ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB12K24K36K48K60K2295.752621.103087.602002.0011285.589663.323392.272454.422001.082062.2055644.001481.511508.401. ALL-H3-CC H2+: $25.00 reported cost.2. ALL-H3-CC H3: $30.00 reported cost.3. ALL-H3-CC H5: $40.00 reported cost.4. Firefly ROC-RK3328-CC: $50.00 reported cost.5. Jetson TX1: $476.99 reported cost.6. Jetson TX2: $549.99 reported cost.7. ODROID-C1+: $49.00 reported cost.8. ODROID-C2: $62.95 reported cost.9. Raspberry Pi 3 B: $34.99 reported cost.10. Raspberry Pi 3 B+: $39.78 reported cost.11. Socionext Developerbox: $1200.00 reported cost.12. Tinker Board: $56.85 reported cost.13. AML-S905X-CC 2GB: $40 reported cost.

Scikit-Learn

OpenBenchmarking.orgSeconds x Dollar, Fewer Is BetterScikit-Learn 0.17.1Performance / Cost -ALL-H3-CC H3ALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB200K400K600K800K1000K67380.0060600.0032500.00207013.6679919.0041798.8029531.5631227.301078800.0026946.9032277.601. ALL-H3-CC H3: $30.00 reported cost.2. ALL-H3-CC H5: $40.00 reported cost.3. Firefly ROC-RK3328-CC: $50.00 reported cost.4. Jetson TX1: $476.99 reported cost.5. ODROID-C1+: $49.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. Raspberry Pi 3 B: $34.99 reported cost.8. Raspberry Pi 3 B+: $39.78 reported cost.9. Socionext Developerbox: $1200.00 reported cost.10. Tinker Board: $56.85 reported cost.11. AML-S905X-CC 2GB: $40 reported cost.

Redis

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: GETALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB2K4K6K8K10K1369.485312.161016.141201.503415.224313.696089.376052.31196.435740.568211.581. ALL-H3-CC H5: $40.00 reported cost.2. Firefly ROC-RK3328-CC: $50.00 reported cost.3. Jetson TX1: $476.99 reported cost.4. Jetson TX2: $549.99 reported cost.5. ODROID-C1+: $49.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. Raspberry Pi 3 B: $34.99 reported cost.8. Raspberry Pi 3 B+: $39.78 reported cost.9. Socionext Developerbox: $1200.00 reported cost.10. Tinker Board: $56.85 reported cost.11. AML-S905X-CC 2GB: $40 reported cost.

OpenBenchmarking.orgRequests Per Second Per Dollar, More Is BetterRedis 4.0.8Performance / Cost - Test: SETALL-H3-CC H5Firefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker BoardAML-S905X-CC 2GB12002400360048006000948.183792.46699.25785.972052.273091.043765.763779.21133.383847.795578.961. ALL-H3-CC H5: $40.00 reported cost.2. Firefly ROC-RK3328-CC: $50.00 reported cost.3. Jetson TX1: $476.99 reported cost.4. Jetson TX2: $549.99 reported cost.5. ODROID-C1+: $49.00 reported cost.6. ODROID-C2: $62.95 reported cost.7. Raspberry Pi 3 B: $34.99 reported cost.8. Raspberry Pi 3 B+: $39.78 reported cost.9. Socionext Developerbox: $1200.00 reported cost.10. Tinker Board: $56.85 reported cost.11. AML-S905X-CC 2GB: $40 reported cost.

PostgreSQL pgbench

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read OnlyFirefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker Board5010015020025059.5433.7126.23106.1096.25189.77164.0526.26234.111. Firefly ROC-RK3328-CC: $50.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ODROID-C1+: $49.00 reported cost.5. ODROID-C2: $62.95 reported cost.6. Raspberry Pi 3 B: $34.99 reported cost.7. Raspberry Pi 3 B+: $39.78 reported cost.8. Socionext Developerbox: $1200.00 reported cost.9. Tinker Board: $56.85 reported cost.

OpenBenchmarking.orgTPS Per Dollar, More Is BetterPostgreSQL pgbench 10.3Performance / Cost - Scaling: Buffer Test - Test: Normal Load - Mode: Read WriteFirefly ROC-RK3328-CCJetson TX1Jetson TX2ODROID-C1+ODROID-C2Raspberry Pi 3 BRaspberry Pi 3 B+Socionext DeveloperboxTinker Board5101520255.262.563.267.0411.4211.693.623.4720.091. Firefly ROC-RK3328-CC: $50.00 reported cost.2. Jetson TX1: $476.99 reported cost.3. Jetson TX2: $549.99 reported cost.4. ODROID-C1+: $49.00 reported cost.5. ODROID-C2: $62.95 reported cost.6. Raspberry Pi 3 B: $34.99 reported cost.7. Raspberry Pi 3 B+: $39.78 reported cost.8. Socionext Developerbox: $1200.00 reported cost.9. Tinker Board: $56.85 reported cost.

Tinymembench

OpenBenchmarking.orgMB/s Per Dollar, More Is BetterTinymembench 2018-05-28Performance / Cost - Standard MemsetAML-S905X-CC 2GB306090120150152.961. $40 reported cost.

Meta Performance Per Dollar

OpenBenchmarking.orgPerformance Per Dollar, More Is BetterMeta Performance Per DollarPerformance Per DollarAML-S905X-CC 2GB20K40K60K80K100K85902.161. $40 reported value. Average value: 3436086.52.

ALL-H3-CC H2+

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 493MB, Disk: 32GB SC32G, Monitor: VE228

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:25 by user phoronix.

ALL-H3-CC H3

Processor: ARMv7 rev 5 @ 0.91GHz (4 Cores), Motherboard: Allwinner sun8i Family Libre Board ALL-H3-CC H3, Memory: 1024MB, Disk: 32GB GB1QT

OS: Ubuntu 18.04, Kernel: 4.14.65-sunxi (armv7l), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-libitm --disable-libquadmath --disable-libquadmath-support --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch=armv7-a --with-as=/usr/bin/arm-linux-gnueabihf-as --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-gcc-major-version-only --with-ld=/usr/bin/arm-linux-gnueabihf-ld --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt ondemand
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 4 September 2018 17:20 by user root.

ALL-H3-CC H5

Processor: ARMVv8 Cortex-A53 (4 Cores), Motherboard: Libre Board ALL-H3-CC H5, Memory: 2048MB, Disk: 32GB GB1QT

OS: Raspbian 9.4, Kernel: 4.18.0-rc3-gfc36def997cf-dirty (aarch64), Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 4 September 2018 15:18 by user pi.

Banana Pi M3

Processor: ARMv7 rev 5 @ 1.80GHz (8 Cores), Motherboard: sun8i, Memory: 2048MB, Disk: 32GB SC32G + 8GB M8G1GC, Graphics: PowerVR

OS: Raspbian 8.0, Kernel: 3.4.39-BPI-M3-Kernel (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 4.9.2, File-System: ext4, Screen Resolution: 1280x720

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-float=hard --with-fpu=vfp -v
Processor Notes: Scaling Governor: sunxi-iks ondemand
Python Notes: Python 2.7.9 + Python 3.4.2

Testing initiated at 6 September 2018 11:59 by user pi.

Firefly ROC-RK3328-CC

Processor: Rockchip @ 1.39GHz (4 Cores), Motherboard: Firefly ROC-RK3328-CC, Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Ubuntu 18.04, Kernel: 4.4.114 (aarch64), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080p60

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: cpufreq-dt performance
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 3 September 2018 13:17 by user firefly.

Jetson TX1

Processor: ARMv8 rev 1 @ 1.73GHz (4 Cores), Motherboard: jetson_tx1, Memory: 4096MB, Disk: 16GB 016G32, Graphics: NVIDIA TEGRA

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Vulkan: 1.0.8, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra-cpufreq interactive
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 10 September 2018 14:01 by user ubuntu.

Jetson TX2

Processor: ARMv8 rev 3 @ 2.04GHz (6 Cores), Motherboard: quill, Memory: 8192MB, Disk: 31GB 032G34, Graphics: NVIDIA TEGRA, Monitor: DELL P2415Q

OS: Ubuntu 16.04, Kernel: 4.4.38-tegra (aarch64), Desktop: Unity 7.4.5, Display Server: X Server 1.18.4, Display Driver: NVIDIA 1.0.0, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 3840x2160

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: tegra_cpufreq schedutil
Disk Mount Options Notes: data=ordered,relatime,rw
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 28 August 2018 17:19 by user NVIDIA.

ODROID-C1+

Processor: ARMv7 rev 1 @ 1.54GHz (4 Cores), Motherboard: ODROIDC, Memory: 804MB, Disk: 32GB GB1QT, Graphics: ARM Mali

OS: Ubuntu 16.04, Kernel: 3.10.107-190 (armv7l), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x2160

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --disable-werror --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-multilib --enable-multilib --enable-nls --enable-objc-gc --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 6 September 2018 14:27 by user odroid.

ODROID-C2

Processor: Amlogic @ 1.54GHz (4 Cores), Motherboard: ODROID-C2, Memory: 2048MB, Disk: 32GB GB1QT, Graphics: OSD

OS: Ubuntu 18.04, Kernel: 3.16.57-20 (aarch64), Display Server: X Server 1.19.6, Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Processor Notes: Scaling Governor: meson_cpufreq performance
Disk Mount Options Notes: errors=remount-ro,noatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 31 August 2018 13:22 by user odroid.

Pine64 1GB

Processor: AArch64 rev 4 @ 1.15GHz (4 Cores), Motherboard: sun50iw1p1, Memory: 1024MB, Disk: 32GB SC32G

OS: Ubuntu 16.04, Kernel: 3.10.104 (aarch64), Display Server: X Server 1.18.4, Compiler: GCC 5.4.0 20160609, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-browser-plugin --disable-libquadmath --disable-werror --enable-checking=release --enable-clocale=gnu --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --target=aarch64-linux-gnu --with-arch-directory=aarch64 --with-default-libstdcxx-abi=new -v
Processor Notes: Scaling Governor: cpufreq-sunxi interactive
Disk Mount Options Notes: data=ordered,noatime,rw,stripe=1024
Python Notes: Python 2.7.12 + Python 3.5.2

Testing initiated at 31 August 2018 21:03 by user ubuntu.

Raspberry Pi 2 B

Processor: ARMv7 rev 5 @ 0.90GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 2 Model B Rev 1.1, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.50-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 16:18 by user pi.

Raspberry Pi 3 B

Processor: ARMv7 rev 4 @ 1.20GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Rev 1.2, Memory: 927MB, Disk: 32GB GB1QT, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 656x416

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 13:01 by user pi.

Raspberry Pi 3 B+

Processor: ARMv7 rev 4 @ 1.40GHz (4 Cores), Motherboard: BCM2835 Raspberry Pi 3 Model B Plus Rev 1.3, Memory: 927MB, Disk: 32GB GB2MW, Graphics: BCM2708

OS: Raspbian 9.4, Kernel: 4.14.62-v7+ (armv7l), Desktop: LXDE, Display Server: X Server 1.19.2, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1200

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv6 --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfp --with-target-system-zlib -v
Processor Notes: Scaling Governor: BCM2835 Freq ondemand
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 27 August 2018 08:18 by user pi.

Socionext Developerbox

Processor: Unknown (24 Cores), Motherboard: Socionext SynQuacer E- DeveloperBox (build #38 BIOS), Memory: 32768MB, Disk: 8GB M32508 + 1000GB Samsung SSD 970 EVO 1TB, Graphics: ASUS NVIDIA GeForce GT 710B 1024MB, Audio: NVIDIA GK208 HDMI/DP, Monitor: ASUS VG236

OS: Ubuntu 18.04, Kernel: 4.15.0-33-generic (aarch64), Compiler: GCC 7.3.0, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-as=/usr/bin/aarch64-linux-gnu-as --with-default-libstdcxx-abi=new --with-gcc-major-version-only --with-ld=/usr/bin/aarch64-linux-gnu-ld -v
Disk Notes: NONE / data=ordered,errors=remount-ro,relatime,rw
Python Notes: Python 2.7.15rc1 + Python 3.6.5

Testing initiated at 24 August 2018 10:16 by user phoronix.

Tinker Board

Processor: ARMv7 rev 1 @ 1.80GHz (4 Cores), Motherboard: Rockchip (Device Tree), Memory: 2048MB, Disk: 32GB GB1QT, Monitor: Acer P243W

OS: Debian 9.0, Kernel: 4.4.16-00006-g4431f98-dirty (armv7l), Desktop: LXDE, Display Server: X Server 1.18.4, Compiler: GCC 6.3.0 20170516, File-System: ext4, Screen Resolution: 1920x1080

Compiler Notes: --build=arm-linux-gnueabihf --disable-browser-plugin --disable-libitm --disable-libquadmath --disable-sjlj-exceptions --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-gnu-unique-object --enable-gtk-cairo --enable-java-awt=gtk --enable-java-home --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-objc-gc=auto --enable-plugin --enable-shared --enable-threads=posix --host=arm-linux-gnueabihf --program-prefix=arm-linux-gnueabihf- --target=arm-linux-gnueabihf --with-arch-directory=arm --with-arch=armv7-a --with-default-libstdcxx-abi=new --with-float=hard --with-fpu=vfpv3-d16 --with-mode=thumb --with-target-system-zlib -v
Processor Notes: Scaling Governor: cpufreq-dt interactive
Disk Mount Options Notes: data=ordered,noatime,rw
Python Notes: Python 2.7.13 + Python 3.5.3

Testing initiated at 31 August 2018 16:13 by user linaro.

AML-S905X-CC 2GB

Processor: ARMv8 Cortex-A53 @ 1.51GHz (4 Cores), Motherboard: amlogic p212 (2019.01-rc2-02349-gd3b0e919c1-dirty BIOS), Memory: 2048MB, Disk: 64GB USD00, Graphics: DRM emulated

OS: Ubuntu 18.04, Kernel: 4.19.14-01736-gab9cf1c7f085-dirty (aarch64), Compiler: GCC 7.3.0, File-System: btrfs, Screen Resolution: 720x576i

Compiler Notes: --build=aarch64-linux-gnu --disable-libquadmath --disable-libquadmath-support --disable-werror --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-fix-cortex-a53-843419 --enable-gnu-unique-object --enable-languages=c,ada,c++,go,d,fortran,objc,obj-c++ --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-multiarch --enable-nls --enable-plugin --enable-shared --enable-threads=posix --host=aarch64-linux-gnu --program-prefix=aarch64-linux-gnu- --target=aarch64-linux-gnu --with-default-libstdcxx-abi=new --with-gcc-major-version-only -v
Processor Notes: Scaling Governor: scpi-cpufreq performance
Python Notes: Python 2.7.15rc1 + Python 3.6.7

Testing initiated at 13 January 2019 00:50 by user libre.