Xorg.0.log - ffte
X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-sb1-bcm91250a mips Debian
Current Operating System: Linux gns1 3.6.9-gnu #1 PREEMPT Tue Dec 4 08:14:59 UTC 2012 mips64
Kernel command line: console=tty no_auto_cmd machtype=8.9 root=/dev/sda6 resume=/dev/sda5 libata.force=80c PMON_VER=LM8089-1.4.9a EC_VER=PQ1D28 machtype=lemote-yeeloong-2f-8.9inches
Build Date: 30 September 2012 12:40:00PM
xorg-server 2:1.12.4-1 (Julien Cristau )
Current version of pixman: 0.26.0
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 9 09:24:34 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor ""
(**) | |-->Device "Card0"
(==) No monitor specified for screen "Screen0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x5ee010
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 12.1
X.Org XInput driver : 16.0
X.Org Server Extension : 6.0
(--) PCI:*(0:0:8:0) 126f:0712:0000:0000 rev 176, Mem @ 0x40000000/16777216
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 6.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.2.0
ABI class: X.Org Server Extension, version 6.0
(II) Loading extension DRI2
(II) LoadModule: "siliconmotion"
(II) Loading /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
(II) Module siliconmotion: vendor="X.Org Foundation"
compiled for 1.12.3.902, module version = 1.7.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 12.1
(II) SMI: driver (version 1.7.6) for Silicon Motion Lynx chipsets: Lynx,
LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR, MSOC
(++) using VT number 7
(WW) Falling back to old probe method for siliconmotion
(--) Assigning device section with no busID to primary device
(--) Chipset LynxEM+ found
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 0.1.0
ABI class: X.Org Video Driver, version 12.1
(II) SMI(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 16/16
(**) SMI(0): Depth 16, (--) framebuffer bpp 16
(==) SMI(0): RGB weight 565
(==) SMI(0): Default visual is TrueColor
(**) SMI(0): Option "pci_burst" "true"
(**) SMI(0): Option "HWCursor" "true"
(**) SMI(0): Option "VideoKey" "45000"
(**) SMI(0): Option "UseBIOS" "false"
(**) SMI(0): Option "PanelSize" "1024x600"
(**) SMI(0): Option "CSCVideo" "false"
(**) SMI(0): PCI Burst enabled
(==) SMI(0): PCI Retry enabled
(**) SMI(0): Using Hardware Cursor
(**) SMI(0): Option: Video key set to 0x0000AFC8
(**) SMI(0): Option: UseBIOS disabled.
(--) SMI(0): Chipset: "LynxEM+"
(==) SMI(0): Dual head disabled
(==) SMI(0): Using XAA acceleration architecture
(==) SMI(0): IOPortBase=76b3c000
(--) SMI(0): videoram: 4096kB
(II) SMI(0): Cursor Offset: 003FFC00
(II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
(II) SMI(0): Reserved: 003FF800
(II) SMI(0): OFF Panel Size = 1024x600
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) SMI(0): I2C bus "I2C bus" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(==) SMI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SMI(0): MCLK = 157.000
(II) SMI(0): Output LVDS has no monitor section
(II) SMI(0): Printing probed modes for output LVDS
(II) SMI(0): Modeline "1024x600"x59.9 49.00 1024 1072 1168 1312 600 603 613 624 -hsync +vsync (37.3 kHz)
(II) SMI(0): Output LVDS connected
(II) SMI(0): Using sloppy heuristic for initial modes
(II) SMI(0): Output LVDS using initial mode 1024x600
(II) SMI(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) SMI(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.12.4, module version = 1.2.1
ABI class: X.Org Video Driver, version 12.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) SMI(0): Cursor Offset: 003FFC00
(II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
(II) SMI(0): Reserved: 003FF800
(II) SMI(0): FrameBuffer Box: 0,0 - 1024,2047
(II) SMI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
28 128x128 slots
7 256x256 slots
32 8x8 color pattern slots
(==) SMI(0): DPMS enabled
(II) SMI(0): I2C device "I2C bus:SAA 7111A" registered at address 0x48.
(II) SMI(0): I2C device "I2C bus:SAA 7111A" removed.
(II) SMI(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) SELinux: Disabled on system
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) SMI(0): Setting screen physical size to 270 x 158
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.12.3, module version = 2.7.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 16.0
(II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
(**) AT Translated Set 2 keyboard: always reports core events
(**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
(--) evdev: AT Translated Set 2 keyboard: Found keys
(II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/event2)
(**) FSPPS/2 Sentelic FingerSensingPad: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'FSPPS/2 Sentelic FingerSensingPad'
(**) FSPPS/2 Sentelic FingerSensingPad: always reports core events
(**) evdev: FSPPS/2 Sentelic FingerSensingPad: Device: "/dev/input/event2"
(--) evdev: FSPPS/2 Sentelic FingerSensingPad: Vendor 0x2 Product 0xf
(--) evdev: FSPPS/2 Sentelic FingerSensingPad: Found 11 mouse buttons
(--) evdev: FSPPS/2 Sentelic FingerSensingPad: Found scroll wheel(s)
(--) evdev: FSPPS/2 Sentelic FingerSensingPad: Found relative axes
(--) evdev: FSPPS/2 Sentelic FingerSensingPad: Found x and y relative axes
(II) evdev: FSPPS/2 Sentelic FingerSensingPad: Configuring as mouse
(II) evdev: FSPPS/2 Sentelic FingerSensingPad: Adding scrollwheel support
(**) evdev: FSPPS/2 Sentelic FingerSensingPad: YAxisMapping: buttons 4 and 5
(**) evdev: FSPPS/2 Sentelic FingerSensingPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event2"
(II) XINPUT: Adding extended input device "FSPPS/2 Sentelic FingerSensingPad" (type: MOUSE, id 7)
(II) evdev: FSPPS/2 Sentelic FingerSensingPad: initialized for relative axes.
(**) FSPPS/2 Sentelic FingerSensingPad: (accel) keeping acceleration scheme 1
(**) FSPPS/2 Sentelic FingerSensingPad: (accel) acceleration profile 0
(**) FSPPS/2 Sentelic FingerSensingPad: (accel) acceleration factor: 2.000
(**) FSPPS/2 Sentelic FingerSensingPad: (accel) acceleration threshold: 4
(II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HotKeys (/dev/input/event1)
(**) HotKeys: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'HotKeys'
(**) HotKeys: always reports core events
(**) evdev: HotKeys: Device: "/dev/input/event1"
(--) evdev: HotKeys: Vendor 0 Product 0
(--) evdev: HotKeys: Found keys
(II) evdev: HotKeys: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/virtual/input/input1/event1"
(II) XINPUT: Adding extended input device "HotKeys" (type: KEYBOARD, id 8)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"