dmesg - erwin
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-16-generic (buildd@zirconium) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #29-Ubuntu SMP Tue Feb 14 12:49:42 UTC 2012 (Ubuntu 3.0.0-16.29-generic 3.0.20)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
[ 0.000000] BIOS-e820: 000000007f680000 - 000000007f68e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f68e000 - 000000007f6d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6d0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI present.
[ 0.000000] DMI: ASUSTeK Computer INC. 1015PX/1015PE, BIOS 1301 05/06/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 2039M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 365ea000 - 372ed000
[ 0.000000] ACPI: RSDP 000fbe90 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 7f680100 0006C (v01 ACRSYS ACRPRDCT 05001106 ANNI 00000097)
[ 0.000000] ACPI: FACP 7f680290 000F4 (v04 A_M_I_ OEMFACP 05001106 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7f6804a0 085B1 (v02 A1563 A1563000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7f68e000 00040
[ 0.000000] ACPI: APIC 7f680390 0006C (v02 A_M_I_ OEMAPIC 05001106 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7f680400 0003C (v01 A_M_I_ OEMMCFG 05001106 MSFT 00000097)
[ 0.000000] ACPI: ECDT 7f680440 00055 (v01 A_M_I_ OEMECDT 05001106 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7f68e040 00061 (v01 A_M_I_ AMI_OEM 05001106 MSFT 00000097)
[ 0.000000] ACPI: HPET 7f688a60 00038 (v01 A_M_I_ OEMHPET 05001106 MSFT 00000097)
[ 0.000000] ACPI: GSCI 7f68e0b0 02024 (v01 A_M_I_ GMCHSCI 05001106 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7f691360 00999 (v01 PmRef CpuPm4 00003000 INTL 20051117)
[ 0.000000] ACPI: SLIC 7f688a98 00176 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f680
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f680
[ 0.000000] On node 0 totalpages: 521743
[ 0.000000] free_area_init_node: node 0, pgdat c17b54c0, node_mem_map f55fa200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292228 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5000000 s26240 r0 d22912 u1048576
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517665
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8349440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f680)
[ 0.000000] Memory: 2038576k/2087424k available (5340k kernel code, 48396k reserved, 2596k data, 696k init, 1178120k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc17c1000 - 0xc186f000 ( 696 kB)
[ 0.000000] .data : 0xc1537104 - 0xc17c0140 (2596 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1537104 (5340 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f440a000 soft=f440c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1666.364 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3332.72 BogoMIPS (lpj=6665456)
[ 0.004017] pid_max: default: 32768 minimum: 301
[ 0.004069] Security Framework initialized
[ 0.004103] AppArmor: AppArmor initialized
[ 0.004108] Yama: becoming mindful.
[ 0.004227] Mount-cache hash table entries: 512
[ 0.004497] Initializing cgroup subsys cpuacct
[ 0.004513] Initializing cgroup subsys memory
[ 0.004532] Initializing cgroup subsys devices
[ 0.004538] Initializing cgroup subsys freezer
[ 0.004544] Initializing cgroup subsys net_cls
[ 0.004549] Initializing cgroup subsys blkio
[ 0.004565] Initializing cgroup subsys perf_event
[ 0.004624] CPU: Physical Processor ID: 0
[ 0.004630] CPU: Processor Core ID: 0
[ 0.004637] mce: CPU supports 5 MCE banks
[ 0.004653] CPU0: Thermal monitoring enabled (TM2)
[ 0.004662] using mwait in idle threads.
[ 0.010777] ACPI: Core revision 20110413
[ 0.024027] ftrace: allocating 24901 entries in 49 pages
[ 0.032101] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032593] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073079] CPU0: Intel(R) Atom(TM) CPU N570 @ 1.66GHz stepping 0a
[ 0.076004] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.076004] ... version: 3
[ 0.076004] ... bit width: 40
[ 0.076004] ... generic registers: 2
[ 0.076004] ... value mask: 000000ffffffffff
[ 0.076004] ... max period: 000000007fffffff
[ 0.076004] ... fixed-purpose events: 3
[ 0.076004] ... event mask: 0000000700000003
[ 0.076004] CPU 1 irqstacks, hard=f44d2000 soft=f44d4000
[ 0.076004] Booting Node 0, Processors #1
[ 0.076004] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.164009] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.164009] Measured 20 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.164009] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.164202] CPU 2 irqstacks, hard=f44de000 soft=f44e0000
[ 0.164207] #2
[ 0.164211] smpboot cpu 2: start_ip = 9b000
[ 0.008000] Initializing CPU#2
[ 0.008000] Disabled fast string operations
[ 0.252328] CPU 3 irqstacks, hard=f44ea000 soft=f44ec000
[ 0.252335] #3 Ok.
[ 0.252339] smpboot cpu 3: start_ip = 9b000
[ 0.008000] Initializing CPU#3
[ 0.008000] Disabled fast string operations
[ 0.340095] Brought up 4 CPUs
[ 0.340102] Total of 4 processors activated (13331.58 BogoMIPS).
[ 0.342369] devtmpfs: initialized
[ 0.342369] PM: Registering ACPI NVS region at 7f68e000 (270336 bytes)
[ 0.348388] print_constraints: dummy:
[ 0.348428] Time: 3:17:44 Date: 03/21/12
[ 0.348517] NET: Registered protocol family 16
[ 0.348542] Trying to unpack rootfs image as initramfs...
[ 0.348868] EISA bus registered
[ 0.348895] ACPI: bus type pci registered
[ 0.349077] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.349088] PCI: not using MMCONFIG
[ 0.349362] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.349369] PCI: Using configuration type 1 for base access
[ 0.352637] bio: create slab at 0
[ 0.357792] ACPI: EC: EC description table is found, configuring boot EC
[ 0.363157] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.376844] ACPI: SSDT 7f690740 0033A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.378200] ACPI: Dynamic OEM Table Load:
[ 0.378213] ACPI: SSDT (null) 0033A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.378739] ACPI: SSDT 7f690c30 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.379940] ACPI: Dynamic OEM Table Load:
[ 0.379953] ACPI: SSDT (null) 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.380834] ACPI: SSDT 7f690520 00217 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.382178] ACPI: Dynamic OEM Table Load:
[ 0.382190] ACPI: SSDT (null) 00217 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.382513] ACPI: SSDT 7f690ba0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.383720] ACPI: Dynamic OEM Table Load:
[ 0.383731] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.384627] ACPI: SSDT 7f690300 00217 (v01 PmRef Cpu2Ist 00003000 INTL 20051117)
[ 0.385969] ACPI: Dynamic OEM Table Load:
[ 0.385982] ACPI: SSDT (null) 00217 (v01 PmRef Cpu2Ist 00003000 INTL 20051117)
[ 0.386315] ACPI: SSDT 7f690b10 00085 (v01 PmRef Cpu2Cst 00003000 INTL 20051117)
[ 0.387539] ACPI: Dynamic OEM Table Load:
[ 0.387552] ACPI: SSDT (null) 00085 (v01 PmRef Cpu2Cst 00003000 INTL 20051117)
[ 0.388458] ACPI: SSDT 7f6900e0 00217 (v01 PmRef Cpu3Ist 00003000 INTL 20051117)
[ 0.389828] ACPI: Dynamic OEM Table Load:
[ 0.389841] ACPI: SSDT (null) 00217 (v01 PmRef Cpu3Ist 00003000 INTL 20051117)
[ 0.390214] ACPI: SSDT 7f690a80 00085 (v01 PmRef Cpu3Cst 00003000 INTL 20051117)
[ 0.391458] ACPI: Dynamic OEM Table Load:
[ 0.391471] ACPI: SSDT (null) 00085 (v01 PmRef Cpu3Cst 00003000 INTL 20051117)
[ 0.392136] ACPI: Interpreter enabled
[ 0.392154] ACPI: (supports S0 S3 S4 S5)
[ 0.392217] ACPI: Using IOAPIC for interrupt routing
[ 0.392310] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.393953] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.393962] PCI: Using MMCONFIG for extended config space
[ 0.408234] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.411849] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.412454] ACPI: No dock devices found.
[ 0.412464] HEST: Table not found.
[ 0.412475] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.412738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.413231] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.413241] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.413251] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.413260] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.413270] pci_root PNP0A08:00: host bridge window [mem 0x7f700000-0xfed8ffff]
[ 0.413308] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[ 0.413392] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[ 0.413415] pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff]
[ 0.413429] pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07]
[ 0.413443] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.413458] pci 0000:00:02.0: reg 1c: [mem 0xf7d00000-0xf7dfffff]
[ 0.413525] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[ 0.413544] pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff]
[ 0.413689] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.413725] pci 0000:00:1b.0: reg 10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
[ 0.413860] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.413873] pci 0000:00:1b.0: PME# disabled
[ 0.413922] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.414074] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.414088] pci 0000:00:1c.0: PME# disabled
[ 0.414142] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.414293] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.414306] pci 0000:00:1c.1: PME# disabled
[ 0.414356] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.414500] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.414512] pci 0000:00:1c.3: PME# disabled
[ 0.414562] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.414638] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
[ 0.414702] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.414776] pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f]
[ 0.414841] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.414916] pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f]
[ 0.414980] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.415056] pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f]
[ 0.415147] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.415184] pci 0000:00:1d.7: reg 10: [mem 0xf7cf7c00-0xf7cf7fff]
[ 0.415320] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.415332] pci 0000:00:1d.7: PME# disabled
[ 0.415370] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.415497] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.415682] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.415721] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087]
[ 0.415742] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003]
[ 0.415763] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07]
[ 0.415784] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883]
[ 0.415806] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc81f]
[ 0.415830] pci 0000:00:1f.2: reg 24: [mem 0xf7cf7800-0xf7cf7bff]
[ 0.415920] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.415931] pci 0000:00:1f.2: PME# disabled
[ 0.416073] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.416086] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.416099] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.416116] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.416234] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 0.416281] pci 0000:02:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
[ 0.416461] pci 0000:02:00.0: supports D1
[ 0.416468] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.416481] pci 0000:02:00.0: PME# disabled
[ 0.424087] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.424103] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.424117] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.424134] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.424259] pci 0000:01:00.0: [1969:2062] type 0 class 0x000200
[ 0.424306] pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.424332] pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.424513] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.424526] pci 0000:01:00.0: PME# disabled
[ 0.432091] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[ 0.432107] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.432120] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.432137] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.432259] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.432272] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.432285] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.432301] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.432312] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.432321] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.432331] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.432340] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.432350] pci 0000:00:1e.0: bridge window [mem 0x7f700000-0xfed8ffff] (subtractive decode)
[ 0.432391] pci_bus 0000:00: on NUMA node 0
[ 0.432407] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.432810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.432938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.433022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.433106] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.433118] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.433125] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.451860] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.452067] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.452237] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.452405] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.452586] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.452758] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.452923] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.453089] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.453400] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.453431] vgaarb: loaded
[ 0.453437] vgaarb: bridge control possible 0000:00:02.0
[ 0.454150] SCSI subsystem initialized
[ 0.454331] libata version 3.00 loaded.
[ 0.454494] usbcore: registered new interface driver usbfs
[ 0.454534] usbcore: registered new interface driver hub
[ 0.454626] usbcore: registered new device driver usb
[ 0.454913] PCI: Using ACPI for IRQ routing
[ 0.455001] PCI: pci_cache_line_size set to 64 bytes
[ 0.455135] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.455144] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.455153] reserve RAM buffer: 000000007f680000 - 000000007fffffff
[ 0.455470] NetLabel: Initializing
[ 0.455480] NetLabel: domain hash size = 128
[ 0.455485] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.455523] NetLabel: unlabeled traffic allowed by default
[ 0.455678] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.455692] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.455707] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.468103] Switching to clocksource hpet
[ 0.471219] Switched to NOHz mode on CPU #0
[ 0.471302] Switched to NOHz mode on CPU #3
[ 0.471314] Switched to NOHz mode on CPU #2
[ 0.471326] Switched to NOHz mode on CPU #1
[ 0.483351] AppArmor: AppArmor Filesystem Enabled
[ 0.483411] pnp: PnP ACPI init
[ 0.483448] ACPI: bus type pnp registered
[ 0.483668] pnp 00:00: [bus 00-ff]
[ 0.483676] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.483682] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.483688] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.483700] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.483707] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.483713] pnp 00:00: [mem 0x7f700000-0xfed8ffff window]
[ 0.483851] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.483882] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.483888] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.483978] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.483986] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.483994] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.484126] pnp 00:02: [dma 4]
[ 0.484133] pnp 00:02: [io 0x0000-0x000f]
[ 0.484138] pnp 00:02: [io 0x0081-0x0083]
[ 0.484143] pnp 00:02: [io 0x0087]
[ 0.484148] pnp 00:02: [io 0x0089-0x008b]
[ 0.484153] pnp 00:02: [io 0x008f]
[ 0.484158] pnp 00:02: [io 0x00c0-0x00df]
[ 0.484217] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.484247] pnp 00:03: [io 0x0070-0x0071]
[ 0.484267] pnp 00:03: [irq 8]
[ 0.484323] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.484400] pnp 00:04: [io 0x0060]
[ 0.484406] pnp 00:04: [io 0x0064]
[ 0.484418] pnp 00:04: [irq 1]
[ 0.484484] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.484563] pnp 00:05: [irq 12]
[ 0.484626] pnp 00:05: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
[ 0.484651] pnp 00:06: [io 0x0061]
[ 0.484718] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.484744] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.484757] pnp 00:07: [irq 13]
[ 0.484816] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.485107] pnp 00:08: [io 0x0010-0x001f]
[ 0.485114] pnp 00:08: [io 0x0022-0x003f]
[ 0.485119] pnp 00:08: [io 0x0044-0x004d]
[ 0.485124] pnp 00:08: [io 0x0050-0x005e]
[ 0.485129] pnp 00:08: [io 0x0063]
[ 0.485134] pnp 00:08: [io 0x0065]
[ 0.485139] pnp 00:08: [io 0x0067-0x006f]
[ 0.485144] pnp 00:08: [io 0x0072-0x007f]
[ 0.485149] pnp 00:08: [io 0x0080]
[ 0.485154] pnp 00:08: [io 0x0084-0x0086]
[ 0.485160] pnp 00:08: [io 0x0088]
[ 0.485165] pnp 00:08: [io 0x008c-0x008e]
[ 0.485170] pnp 00:08: [io 0x0090-0x009f]
[ 0.485176] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.485181] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.485187] pnp 00:08: [io 0x025c-0x025f]
[ 0.485192] pnp 00:08: [io 0x0380-0x0383]
[ 0.485197] pnp 00:08: [io 0x0400-0x041f]
[ 0.485203] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.485208] pnp 00:08: [io 0x0800-0x087f]
[ 0.485214] pnp 00:08: [io 0x0400-0x03ff disabled]
[ 0.485220] pnp 00:08: [io 0x0480-0x04bf]
[ 0.485226] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.485231] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.485237] pnp 00:08: [mem 0xfed50000-0xfed8ffff]
[ 0.485243] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.485249] pnp 00:08: [mem 0xfff00000-0xffffffff]
[ 0.485378] system 00:08: [io 0x025c-0x025f] has been reserved
[ 0.485386] system 00:08: [io 0x0380-0x0383] has been reserved
[ 0.485393] system 00:08: [io 0x0400-0x041f] has been reserved
[ 0.485400] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.485406] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.485413] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.485421] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.485429] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.485436] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.485443] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.485450] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.485459] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.485604] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.485669] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.485793] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.485800] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.485890] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.485899] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.485907] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.485996] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.486093] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.486103] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.486617] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.486624] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.486630] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.486636] pnp 00:0c: [mem 0x00100000-0x7f6fffff]
[ 0.486641] pnp 00:0c: [mem 0xfed90000-0xffffffff]
[ 0.486764] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.486772] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.486779] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.486787] system 00:0c: [mem 0x00100000-0x7f6fffff] could not be reserved
[ 0.486794] system 00:0c: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.486803] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.487212] pnp: PnP ACPI: found 13 devices
[ 0.487217] ACPI: ACPI bus type pnp unregistered
[ 0.487225] PnPBIOS: Disabled by ACPI PNP
[ 0.525848] PCI: max bus depth: 1 pci_try_num: 2
[ 0.525918] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.525928] pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.525937] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff]
[ 0.525946] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.525955] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.525962] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.525969] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.525980] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff]
[ 0.525990] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.526003] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.526010] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.526021] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.526031] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.526044] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[ 0.526051] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.526062] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.526071] pci 0000:00:1c.3: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.526084] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.526089] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.526099] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.526107] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.526129] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.526159] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.526170] pci 0000:00:1c.0: setting latency timer to 64
[ 0.526184] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.526202] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.526212] pci 0000:00:1c.1: setting latency timer to 64
[ 0.526234] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.526244] pci 0000:00:1c.3: setting latency timer to 64
[ 0.526258] pci 0000:00:1e.0: setting latency timer to 64
[ 0.526267] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.526273] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.526279] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.526285] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.526292] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff]
[ 0.526298] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.526304] pci_bus 0000:04: resource 1 [mem 0x80200000-0x803fffff]
[ 0.526311] pci_bus 0000:04: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.526318] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.526324] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.526330] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.526337] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.526343] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.526350] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.526357] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.526363] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.526369] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.526375] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.526382] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff]
[ 0.526457] NET: Registered protocol family 2
[ 0.526614] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.527097] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.528091] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.528524] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.528530] TCP reno registered
[ 0.528540] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.528559] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.528800] NET: Registered protocol family 1
[ 0.528839] pci 0000:00:02.0: Boot video device
[ 0.529003] PCI: CLS 32 bytes, default 64
[ 0.529943] audit: initializing netlink socket (disabled)
[ 0.529965] type=2000 audit(1332299863.524:1): initialized
[ 0.578526] highmem bounce pool size: 64 pages
[ 0.578540] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.591714] VFS: Disk quotas dquot_6.5.2
[ 0.591877] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.593649] fuse init (API version 7.16)
[ 0.593886] msgmni has been set to 1680
[ 0.594962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.595032] io scheduler noop registered
[ 0.595040] io scheduler deadline registered
[ 0.595085] io scheduler cfq registered (default)
[ 0.595315] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.595398] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.595523] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.595595] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.595712] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.595783] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.595944] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.595999] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.596170] intel_idle: MWAIT substates: 0x20220
[ 0.596190] intel_idle: v0.4 model 0x1C
[ 0.596194] intel_idle: lapic_timer_reliable_states 0x2
[ 0.596337] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.596449] ACPI: AC Adapter [AC0] (off-line)
[ 0.596711] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.601366] ACPI: Lid Switch [LID]
[ 0.601469] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.601480] ACPI: Sleep Button [SLPB]
[ 0.601574] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.601583] ACPI: Power Button [PWRB]
[ 0.601694] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.601703] ACPI: Power Button [PWRF]
[ 0.601761] ACPI: acpi_idle yielding to intel_idle
[ 0.617136] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.617147] ACPI: Thermal Zone [TZ00] (36 C)
[ 0.617243] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.617326] ERST: Table is not found!
[ 0.617723] isapnp: Scanning for PnP cards...
[ 0.706746] ACPI: Battery Slot [BAT0] (battery present)
[ 0.971467] isapnp: No Plug & Play device found
[ 0.977590] Freeing initrd memory: 13324k freed
[ 1.235643] Linux agpgart interface v0.103
[ 1.235815] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 1.235984] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.236283] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.236534] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.239592] brd: module loaded
[ 1.241172] loop: module loaded
[ 1.242421] Fixed MDIO Bus: probed
[ 1.242496] PPP generic driver version 2.4.2
[ 1.242614] tun: Universal TUN/TAP device driver, 1.6
[ 1.242619] tun: (C) 1999-2004 Max Krasnyansky
[ 1.242829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.242899] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.242934] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.242942] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.243037] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.243076] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.243095] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.246996] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.247032] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[ 1.260036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.260317] hub 1-0:1.0: USB hub found
[ 1.260329] hub 1-0:1.0: 8 ports detected
[ 1.260492] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.260527] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.260600] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.260616] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.260623] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.260722] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.260766] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.261059] hub 2-0:1.0: USB hub found
[ 1.261071] hub 2-0:1.0: 2 ports detected
[ 1.261203] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.261218] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.261225] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.261315] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.261374] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 1.261668] hub 3-0:1.0: USB hub found
[ 1.261679] hub 3-0:1.0: 2 ports detected
[ 1.261818] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.261833] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.261841] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.261935] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.261995] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 1.262286] hub 4-0:1.0: USB hub found
[ 1.262297] hub 4-0:1.0: 2 ports detected
[ 1.262422] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.262440] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.262447] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.262544] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.262601] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.262916] hub 5-0:1.0: USB hub found
[ 1.262927] hub 5-0:1.0: 2 ports detected
[ 1.263179] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.280801] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.280823] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.281127] mousedev: PS/2 mouse device common for all mice
[ 1.282172] rtc_cmos 00:03: RTC can wake from S4
[ 1.282352] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.282393] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.282652] device-mapper: uevent: version 1.0.3
[ 1.282857] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.282936] EISA: Probing bus 0 at eisa.0
[ 1.282942] EISA: Cannot allocate resource for mainboard
[ 1.282949] Cannot allocate resource for EISA slot 1
[ 1.282954] Cannot allocate resource for EISA slot 2
[ 1.282959] Cannot allocate resource for EISA slot 3
[ 1.282965] Cannot allocate resource for EISA slot 4
[ 1.282970] Cannot allocate resource for EISA slot 5
[ 1.282976] Cannot allocate resource for EISA slot 6
[ 1.282981] Cannot allocate resource for EISA slot 7
[ 1.282986] Cannot allocate resource for EISA slot 8
[ 1.282991] EISA: Detected 0 cards.
[ 1.283008] cpufreq-nforce2: No nForce2 chipset.
[ 1.283315] cpuidle: using governor ladder
[ 1.283833] cpuidle: using governor menu
[ 1.283839] EFI Variables Facility v0.08 2004-May-17
[ 1.284525] TCP cubic registered
[ 1.284883] NET: Registered protocol family 10
[ 1.286260] NET: Registered protocol family 17
[ 1.286307] Registering the dns_resolver key type
[ 1.286371] Using IPI No-Shortcut mode
[ 1.286618] PM: Hibernation image not present or could not be loaded.
[ 1.286642] registered taskstats version 1
[ 1.302402] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.307200] Magic number: 4:593:260
[ 1.307357] rtc_cmos 00:03: setting system clock to 2012-03-21 03:17:45 UTC (1332299865)
[ 1.327478] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.327485] EDD information not available.
[ 1.327813] Freeing unused kernel memory: 696k freed
[ 1.328351] Write protecting the kernel text: 5344k
[ 1.328457] Write protecting the kernel read-only data: 2188k
[ 1.369373] udevd[90]: starting version 173
[ 1.453348] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.453378] atl1c 0000:01:00.0: setting latency timer to 64
[ 1.526042] ahci 0000:00:1f.2: version 3.0
[ 1.526103] ahci 0000:00:1f.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.526214] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.526359] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 1.526373] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.526388] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.528503] scsi0 : ahci
[ 1.529561] scsi1 : ahci
[ 1.533474] scsi2 : ahci
[ 1.535232] scsi3 : ahci
[ 1.535853] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 43
[ 1.535861] ata2: DUMMY
[ 1.535865] ata3: DUMMY
[ 1.535869] ata4: DUMMY
[ 1.572083] usb 1-6: new high speed USB device number 2 using ehci_hcd
[ 1.585491] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 1.852088] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.853032] ata1.00: unexpected _GTF length (8)
[ 1.853342] ata1.00: ATA-8: Hitachi HTS543232A7A384, ES2OA60W, max UDMA/133
[ 1.853351] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.854991] ata1.00: unexpected _GTF length (8)
[ 1.855277] ata1.00: configured for UDMA/133
[ 1.855571] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 ES2O PQ: 0 ANSI: 5
[ 1.856180] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.856246] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.856560] sd 0:0:0:0: [sda] Write Protect is off
[ 1.856573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.856692] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.904560] sda: sda1 sda2 < sda5 >
[ 1.905552] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.540136] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 15.038142] udevd[340]: starting version 173
[ 15.085316] lp: driver loaded but no devices found
[ 15.276696] wmi: Mapper loaded
[ 15.467933] cfg80211: Calling CRDA to update world regulatory domain
[ 15.514913] [drm] Initialized drm 1.1.0 20060810
[ 15.553797] type=1400 audit(1332274679.741:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=518 comm="apparmor_parser"
[ 15.559494] type=1400 audit(1332274679.745:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=518 comm="apparmor_parser"
[ 15.560449] type=1400 audit(1332274679.749:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=518 comm="apparmor_parser"
[ 15.562244] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.562272] ath9k 0000:02:00.0: setting latency timer to 64
[ 15.616128] ath: EEPROM regdomain: 0x60
[ 15.616137] ath: EEPROM indicates we should expect a direct regpair map
[ 15.616149] ath: Country alpha2 being used: 00
[ 15.616155] ath: Regpair used: 0x60
[ 15.616165] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616176] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616185] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616196] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616204] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616215] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616223] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616233] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616242] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616252] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616261] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616271] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616279] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616290] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616298] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616309] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616317] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616328] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616337] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616347] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616355] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616366] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616374] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616385] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616393] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616403] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.616412] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 15.616422] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.618609] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 15.635975] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.635992] i915 0000:00:02.0: setting latency timer to 64
[ 15.666277] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 15.671728] Registered led device: ath9k-phy0
[ 15.671756] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8260000, irq=17
[ 15.685774] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 15.685880] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 15.685888] [drm] Driver supports precise vblank timestamp query.
[ 15.726456] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 15.767423] Linux video capture interface: v2.00
[ 15.778715] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[ 15.798684] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input5
[ 15.798969] usbcore: registered new interface driver uvcvideo
[ 15.798978] USB Video Class driver (v1.1.0)
[ 15.824636] psmouse serio1: ID: 10 00 64
[ 15.988529] elantech: assuming hardware version 2, firmware version 20.1.0
[ 16.050220] elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a.
[ 16.052884] [drm] initialized overlay support
[ 16.081279] fbcon: inteldrmfb (fb0) is primary device
[ 16.081612] Console: switching to colour frame buffer device 128x37
[ 16.081691] fb0: inteldrmfb frame buffer device
[ 16.081698] drm: registered panic notifier
[ 16.112709] acpi device:2c: registered as cooling_device4
[ 16.113031] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 16.113225] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 16.113373] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 16.113519] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.113645] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 16.113726] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.154423] asus_wmi: ASUS WMI generic driver loaded
[ 16.159409] asus_wmi: Initialization: 0x0
[ 16.159535] asus_wmi: BIOS WMI version: 0.8
[ 16.159781] asus_wmi: SFUN value: 0x0
[ 16.161928] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[ 16.176257] hda_codec: ALC269VB: BIOS auto-probing.
[ 16.189483] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 16.200911] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.200924] cfg80211: World regulatory domain updated:
[ 16.200931] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.200941] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.200950] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.200959] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.200968] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.200977] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.364130] elantech: retrying ps2 command 0xe6 (2).
[ 16.878226] elantech: retrying ps2 command 0xf8 (2).
[ 17.169909] asus_wmi: Backlight controlled by ACPI video driver
[ 17.580070] elantech: retrying ps2 command 0xf8 (1).
[ 18.145870] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[ 19.680537] Adding 262136k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262136k
[ 19.752450] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[ 20.046794] type=1400 audit(1332274684.233:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=800 comm="apparmor_parser"
[ 20.058142] type=1400 audit(1332274684.245:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=800 comm="apparmor_parser"
[ 20.059415] type=1400 audit(1332274684.245:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=800 comm="apparmor_parser"
[ 20.069444] type=1400 audit(1332274684.257:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=811 comm="apparmor_parser"
[ 20.077063] ppdev: user-space parallel port driver
[ 20.089593] type=1400 audit(1332274684.277:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=811 comm="apparmor_parser"
[ 20.093824] type=1400 audit(1332274684.281:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=799 comm="apparmor_parser"
[ 20.107786] type=1400 audit(1332274684.293:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=822 comm="apparmor_parser"
[ 20.398310] init: failsafe main process (752) killed by TERM signal
[ 20.403126] init: apport pre-start process (860) terminated with status 1
[ 20.456180] init: apport post-stop process (891) terminated with status 1
[ 20.701885] Bluetooth: Core ver 2.16
[ 20.701987] NET: Registered protocol family 31
[ 20.701994] Bluetooth: HCI device and connection manager initialized
[ 20.702002] Bluetooth: HCI socket layer initialized
[ 20.702009] Bluetooth: L2CAP socket layer initialized
[ 20.703059] Bluetooth: SCO socket layer initialized
[ 20.720255] Bluetooth: RFCOMM TTY layer initialized
[ 20.720273] Bluetooth: RFCOMM socket layer initialized
[ 20.720280] Bluetooth: RFCOMM ver 1.11
[ 20.790833] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.790842] Bluetooth: BNEP filters: protocol multicast
[ 20.925157] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.950740] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
[ 21.037079] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.044770] init: anacron main process (883) killed by TERM signal
[ 22.517290] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=600
[ 22.988895] init: plymouth-stop pre-start process (1180) terminated with status 1
[ 24.074803] wlan0: authenticate with 00:25:9c:8a:82:71 (try 1)
[ 24.076816] wlan0: authenticated
[ 24.077911] wlan0: associate with 00:25:9c:8a:82:71 (try 1)
[ 24.098603] wlan0: RX AssocResp from 00:25:9c:8a:82:71 (capab=0xc11 status=0 aid=1)
[ 24.098622] wlan0: associated
[ 24.106272] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.107409] cfg80211: Calling CRDA for country: GB
[ 24.118929] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 24.118943] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.118951] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 24.118961] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.118969] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 24.118978] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.118987] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 24.118996] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.119004] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 24.119013] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.119021] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 24.119031] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.119038] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 24.119048] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.119056] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 24.119065] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.119073] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 24.119082] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.119090] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 24.119099] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.119108] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 24.119117] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.119125] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 24.119135] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.119142] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 24.119152] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 24.119159] cfg80211: Disabling freq 2484 MHz
[ 24.119173] cfg80211: Regulatory domain changed to country: GB
[ 24.119180] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 24.119189] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.119197] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.119206] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 24.119214] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 30.228688] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=600
[ 34.824037] wlan0: no IPv6 routers present
[ 48.252090] CE: hpet increased min_delta_ns to 20113 nsec
[ 9769.004657] kbd_keycode: 21 callbacks suppressed
[ 9769.004669] keyboard: can't emulate rawmode for keycode 240
[ 9769.004705] keyboard: can't emulate rawmode for keycode 240
[ 9769.004726] asus_wmi: Unknown key 58 pressed
[ 9775.589257] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[15105.941556] keyboard: can't emulate rawmode for keycode 240
[15105.941583] keyboard: can't emulate rawmode for keycode 240
[15105.941594] asus_wmi: Unknown key 57 pressed
[15112.483084] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=600
[15705.700677] keyboard: can't emulate rawmode for keycode 240
[15705.700776] keyboard: can't emulate rawmode for keycode 240
[15705.700799] asus_wmi: Unknown key 58 pressed
[15709.127595] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[21968.062525] keyboard: can't emulate rawmode for keycode 240
[21968.062547] keyboard: can't emulate rawmode for keycode 240
[21968.062558] asus_wmi: Unknown key 57 pressed
[21969.289775] cfg80211: All devices are disconnected, going to restore regulatory settings
[21969.289791] cfg80211: Restoring regulatory settings
[21969.289820] cfg80211: Calling CRDA to update world regulatory domain
[21970.129485] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[21970.129497] cfg80211: World regulatory domain updated:
[21970.129504] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[21970.129514] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21970.129524] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[21970.129533] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[21970.129542] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21970.129550] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[21970.622177] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=600
[22921.664843] keyboard: can't emulate rawmode for keycode 240
[22921.664877] keyboard: can't emulate rawmode for keycode 240
[22921.664891] asus_wmi: Unknown key 58 pressed
[22923.005466] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[23006.777422] wlan0: authenticate with 00:25:9c:8a:82:71 (try 1)
[23006.782423] wlan0: authenticated
[23006.802549] wlan0: associate with 00:25:9c:8a:82:71 (try 1)
[23006.821960] wlan0: RX ReassocResp from 00:25:9c:8a:82:71 (capab=0xc11 status=0 aid=1)
[23006.821972] wlan0: associated
[23006.829808] cfg80211: Calling CRDA for country: GB
[23006.845011] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[23006.845024] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845033] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[23006.845043] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845050] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[23006.845060] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845068] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[23006.845077] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845085] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[23006.845095] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845103] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[23006.845112] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845120] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[23006.845130] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845138] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[23006.845147] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845155] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[23006.845165] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845173] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[23006.845182] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845190] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[23006.845200] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845208] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[23006.845217] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845225] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[23006.845235] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[23006.845242] cfg80211: Disabling freq 2484 MHz
[23006.845256] cfg80211: Regulatory domain changed to country: GB
[23006.845262] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[23006.845271] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[23006.845280] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[23006.845289] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[23006.845297] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[23017.600030] wlan0: no IPv6 routers present
[42356.982469] keyboard: can't emulate rawmode for keycode 240
[42356.982494] keyboard: can't emulate rawmode for keycode 240
[42356.982509] asus_wmi: Unknown key 57 pressed
[42358.287984] cfg80211: All devices are disconnected, going to restore regulatory settings
[42358.288035] cfg80211: Restoring regulatory settings
[42358.288549] cfg80211: Calling CRDA to update world regulatory domain
[42359.313282] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[42359.313293] cfg80211: World regulatory domain updated:
[42359.313298] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[42359.313306] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[42359.313313] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[42359.313322] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[42359.313331] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[42359.313340] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[42362.629041] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=600