dmesg - 2012-02-14-Run
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.4.1.el6.x86_64 (mockbuild@c6b18n1.dev.centos.org) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Tue Jan 24 02:13:44 GMT 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cf699000 (usable)
BIOS-e820: 00000000cf699000 - 00000000cf6af000 (reserved)
BIOS-e820: 00000000cf6af000 - 00000000cf6ce000 (ACPI data)
BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
DMI 2.6 present.
SMBIOS version 2.6 @ 0xFCB00
DMI: Dell Inc. PowerEdge R510/0W844P, BIOS 1.1.4 11/04/2009
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 base 0100000000 mask FF00000000 write-back
4 base 0200000000 mask FFE0000000 write-back
5 base 0220000000 mask FFF0000000 write-back
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcf699 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000cf699000
0000000000 - 00cf600000 page 2M
00cf600000 - 00cf699000 page 4k
kernel direct mapping tables up to cf699000 @ 8000-e000
init_memory_mapping: 0000000100000000-0000000230000000
0100000000 - 0230000000 page 2M
kernel direct mapping tables up to 230000000 @ c000-16000
RAMDISK: 370a2000 - 37fef3a3
ACPI: RSDP 00000000000f1060 00024 (v02 DELL )
ACPI: XSDT 00000000000f1164 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000cf6c3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000cf6af000 03A66 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000cf6c6000 00040
ACPI: APIC 00000000cf6c3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000cf6c35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000cf6c362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 00000000cf6c3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000cf6c38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000cf6c3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000cf6c3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000cf6b2be8 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000cf6b2e58 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000cf6b2a68 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000cf6b2a98 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 00000000cf6c3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000cf6c3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000cf6c7000 041E4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 16 -> Node 0
SRAT: PXM 2 -> APIC 0 -> Node 1
SRAT: PXM 1 -> APIC 18 -> Node 0
SRAT: PXM 2 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 20 -> Node 0
SRAT: PXM 2 -> APIC 4 -> Node 1
SRAT: PXM 1 -> APIC 22 -> Node 0
SRAT: PXM 2 -> APIC 6 -> Node 1
SRAT: PXM 1 -> APIC 17 -> Node 0
SRAT: PXM 2 -> APIC 1 -> Node 1
SRAT: PXM 1 -> APIC 19 -> Node 0
SRAT: PXM 2 -> APIC 3 -> Node 1
SRAT: PXM 1 -> APIC 21 -> Node 0
SRAT: PXM 2 -> APIC 5 -> Node 1
SRAT: PXM 1 -> APIC 23 -> Node 0
SRAT: PXM 2 -> APIC 7 -> Node 1
SRAT: Node 1 PXM 2 0-d0000000
SRAT: Node 1 PXM 2 100000000-130000000
SRAT: Node 0 PXM 1 130000000-230000000
NUMA: Using 28 for the hash shift.
Bootmem setup node 0 0000000130000000-0000000230000000
NODE_DATA [0000000130000000 - 0000000130033fff]
bootmap [0000000130034000 - 0000000130053fff] pages 20
(8 early reservations) ==> bootmem [0130000000 - 0230000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000200c7e4] TEXT DATA BSS
#3 [00370a2000 - 0037fef3a3] RAMDISK
#4 [000009ec00 - 0000100000] BIOS reserved
#5 [000200d000 - 000200d461] BRK
#6 [0000008000 - 000000c000] PGTABLE
#7 [000000c000 - 0000011000] PGTABLE
Bootmem setup node 1 0000000000000000-0000000130000000
NODE_DATA [0000000000011040 - 000000000004503f]
bootmap [0000000000046000 - 000000000006bfff] pages 26
(8 early reservations) ==> bootmem [0000000000 - 0130000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000200c7e4] TEXT DATA BSS ==> [0001000000 - 000200c7e4]
#3 [00370a2000 - 0037fef3a3] RAMDISK ==> [00370a2000 - 0037fef3a3]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#5 [000200d000 - 000200d461] BRK ==> [000200d000 - 000200d461]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
found SMP MP-table at [ffff8800000fe710] fe710
Reserving 128MB of memory at 48MB for crashkernel (System RAM: 8960MB)
[ffffea0004280000-ffffea00043fffff] potential offnode page_structs
[ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 1
[ffffea0004400000-ffffea0007bfffff] PMD -> [ffff880130200000-ffff8801339fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00230000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
1: 0x00000001 -> 0x000000a0
1: 0x00000100 -> 0x000cf699
1: 0x00100000 -> 0x00130000
0: 0x00130000 -> 0x00230000
On node 0 totalpages: 1048576
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
On node 1 totalpages: 1046072
DMA zone: 56 pages used for memmap
DMA zone: 109 pages reserved
DMA zone: 3834 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 831185 pages, LIFO batch:31
Normal zone: 2688 pages used for memmap
Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 32 CPUs, 16 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000cf699000 - 00000000cf6af000
PM: Registered nosave memory: 00000000cf6af000 - 00000000cf6ce000
PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s92632 r8192 d22056 u131072
pcpu-alloc: s92632 r8192 d22056 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Node order, mobility grouping on. Total pages: 2063179
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 8027932k/9175040k available (5084k kernel code, 796448k absent, 350660k reserved, 7229k data, 1244k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1208
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2266.542 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.08 BogoMIPS (lpj=2266542)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20777 entries in 82 pages
DMAR: Host address width 40
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
IOMMU fed90000: ver 1:0 cap c90780106f0462 ecap f020f6
DMAR: RMRR base: 0x000000cf7c8000 end: 0x000000cf7dffff
DMAR: RMRR base: 0x000000cf7b1000 end: 0x000000cf7bffff
DMAR: RMRR base: 0x000000cf7a1000 end: 0x000000cf7a1fff
DMAR: RMRR base: 0x000000cf7a3000 end: 0x000000cf7a3fff
DMAR: RMRR base: 0x000000cf7a5000 end: 0x000000cf7a5fff
DMAR: RMRR base: 0x000000cf7a7000 end: 0x000000cf7a7fff
DMAR: RMRR base: 0x000000cf7a9000 end: 0x000000cf7a9fff
DMAR: RMRR base: 0x000000cf7c0000 end: 0x000000cf7c0fff
DMAR: RMRR base: 0x000000cf7c2000 end: 0x000000cf7c2fff
DMAR: ATSR flags: 0x0
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05
Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 1, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 1, Processors #3 Ok.
Booting Node 0, Processors #4 Ok.
Booting Node 1, Processors #5 Ok.
Booting Node 0, Processors #6 Ok.
Booting Node 1, Processors #7 Ok.
Booting Node 0, Processors #8 Ok.
Booting Node 1, Processors #9 Ok.
Booting Node 0, Processors #10 Ok.
Booting Node 1, Processors #11 Ok.
Booting Node 0, Processors #12 Ok.
Booting Node 1, Processors #13 Ok.
Booting Node 0, Processors #14 Ok.
Booting Node 1, Processors #15
Brought up 16 CPUs
Total of 16 processors activated (72523.69 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xdc40-0xdc5f]
pci 0000:00:1a.1: reg 20 io port: [0xdc60-0xdc7f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xdc80-0xdc9f]
pci 0000:00:1d.1: reg 20 io port: [0xdca0-0xdcbf]
pci 0000:00:1d.2: reg 20 io port: [0xdcc0-0xdcdf]
pci 0000:00:1d.3: reg 20 io port: [0xdce0-0xdcff]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
pci 0000:00:1f.2: reg 10 io port: [0xd8e0-0xd8e7]
pci 0000:00:1f.2: reg 14 io port: [0xd8d0-0xd8d3]
pci 0000:00:1f.2: reg 18 io port: [0xd8e8-0xd8ef]
pci 0000:00:1f.2: reg 1c io port: [0xd8d4-0xd8d7]
pci 0000:00:1f.2: reg 20 io port: [0xdc00-0xdc0f]
pci 0000:00:1f.2: reg 24 io port: [0xdc10-0xdc1f]
pci 0000:00:1f.5: reg 10 io port: [0xd8f0-0xd8f7]
pci 0000:00:1f.5: reg 14 io port: [0xd8d8-0xd8db]
pci 0000:00:1f.5: reg 18 io port: [0xd8f8-0xd8ff]
pci 0000:00:1f.5: reg 1c io port: [0xd8dc-0xd8df]
pci 0000:00:1f.5: reg 20 io port: [0xdc20-0xdc2f]
pci 0000:00:1f.5: reg 24 io port: [0xdc30-0xdc3f]
pci 0000:01:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:00:01.0: bridge 32bit mmio: [0xda000000-0xddffffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xdf180000-0xdf1bffff]
pci 0000:02:00.0: reg 18 io port: [0xfc00-0xfcff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xdf1c0000-0xdf1fffff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xdf100000-0xdf107fff]
pci 0000:02:00.0: supports D1
pci 0000:00:03.0: bridge io port: [0xf000-0xffff]
pci 0000:00:03.0: bridge 32bit mmio: [0xdf100000-0xdf1fffff]
pci 0000:03:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:07.0: bridge io port: [0xe000-0xefff]
pci 0000:00:07.0: bridge 32bit mmio: [0xdf200000-0xdf3fffff]
pci 0000:04:08.0: reg 10 io port: [0xec00-0xecff]
pci 0000:04:08.0: reg 14 64bit mmio: [0xdf3ec000-0xdf3effff]
pci 0000:04:08.0: reg 1c 64bit mmio: [0xdf3f0000-0xdf3fffff]
pci 0000:04:08.0: reg 30 32bit mmio pref: [0xdf200000-0xdf2fffff]
pci 0000:04:08.0: supports D1 D2
pci 0000:03:00.0: bridge io port: [0xe000-0xefff]
pci 0000:03:00.0: bridge 32bit mmio: [0xdf200000-0xdf3fffff]
pci 0000:07:03.0: reg 10 32bit mmio pref: [0xd9800000-0xd9ffffff]
pci 0000:07:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
pci 0000:07:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
pci 0000:07:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd9800000-0xd9ffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
vgaarb: device added: PCI:0000:07:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x880-0x8ff could not be reserved
system 00:07: ioport range 0x900-0x91f has been reserved
system 00:07: ioport range 0x920-0x923 has been reserved
system 00:07: ioport range 0x924-0x924 has been reserved
system 00:07: ioport range 0xc00-0xc7f has been reserved
system 00:07: ioport range 0xca0-0xca7 has been reserved
system 00:07: ioport range 0xca9-0xcab has been reserved
system 00:07: ioport range 0xcad-0xcaf has been reserved
system 00:08: ioport range 0xca8-0xca8 has been reserved
system 00:08: ioport range 0xcac-0xcac has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0xfed90000-0xfed91fff has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [0xda000000-0xddffffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: bridge window [0xf000-0xffff]
pci 0000:00:03.0: bridge window [0xdf100000-0xdf1fffff]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:03:00.0: PCI bridge to [bus 04-04]
pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
pci 0000:03:00.0: bridge window [0xe000-0xefff]
pci 0000:03:00.0: bridge window [0xdf200000-0xdf3fffff]
pci 0000:03:00.0: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 03-04]
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0: bridge window [0xe000-0xefff]
pci 0000:00:07.0: bridge window [0xdf200000-0xdf3fffff]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 05-05]
pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem disabled]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0a.0: PCI bridge to [bus 06-06]
pci 0000:00:0a.0: PCI bridge, secondary bus 0000:06
pci 0000:00:0a.0: bridge window [io disabled]
pci 0000:00:0a.0: bridge window [mem disabled]
pci 0000:00:0a.0: bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [0xd9800000-0xd9ffffff]
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:07.0: setting latency timer to 64
pci 0000:03:00.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0a.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:0a.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xda000000-0xddffffff]
pci_bus 0000:02: resource 0 io: [0xf000-0xffff]
pci_bus 0000:02: resource 1 mem: [0xdf100000-0xdf1fffff]
pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
pci_bus 0000:03: resource 1 mem: [0xdf200000-0xdf3fffff]
pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
pci_bus 0000:04: resource 1 mem: [0xdf200000-0xdf3fffff]
pci_bus 0000:07: resource 1 mem: [0xde000000-0xdeffffff]
pci_bus 0000:07: resource 2 pref mem [0xd9800000-0xd9ffffff]
pci_bus 0000:07: resource 3 io: [0x00-0xffff]
pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:03:00.0: rerouting interrupts for [8086:032c]
pci 0000:07:03.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15668k freed
DMAR: Device scope device [0000:00:1a.02] not found
DMAR: Device scope device [0000:00:1a.02] not found
audit: initializing netlink socket (disabled)
type=2000 audit(1329210860.358:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15710
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 6026879AB64C543F
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:07.0: irq 58 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:09.0: irq 59 for MSI/MSI-X
pcieport 0000:00:0a.0: setting latency timer to 64
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:0a.0: irq 60 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
processor LNXCPU:08: registered as cooling_device8
processor LNXCPU:09: registered as cooling_device9
processor LNXCPU:0a: registered as cooling_device10
processor LNXCPU:0b: registered as cooling_device11
processor LNXCPU:0c: registered as cooling_device12
processor LNXCPU:0d: registered as cooling_device13
processor LNXCPU:0e: registered as cooling_device14
processor LNXCPU:0f: registered as cooling_device15
ERST: Could not register with persistent store
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.4.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.4.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000dc40
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-220.4.1.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000dc60
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-220.4.1.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dc80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-220.4.1.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dca0
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-220.4.1.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000dcc0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-220.4.1.el6.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000dce0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.32-220.4.1.el6.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2012-02-14 09:14:21 UTC (1329210861)
Initalizing network drop monitor service
Freeing unused kernel memory: 1244k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1040k freed
Freeing unused kernel memory: 1760k freed
dracut: dracut-004-256.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
megasas: 00.00.05.40-rh2 Thu. Aug. 4 17:00:00 PDT 2011
megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 2:slot 0:func 0
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
megaraid_sas 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
megaraid_sas 0000:02:00.0: setting latency timer to 64
megasas: FW now in Ready state
megasas_init_mfi: fw_support_ieee=0
megasas: INIT adapter done
usb 1-3: new high speed USB device using ehci_hcd and address 2
megaraid_sas: fw state:c0000000
megasas: fwstate:c0000000, dis_OCR=0
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:0:0: Direct-Access SEAGATE ST3146356SS HS0F PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access SEAGATE ST3146356SS HS0F PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
usb 1-3: New USB device found, idVendor=0424, idProduct=2514
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
scsi 0:0:32:0: Enclosure DP BACKPLANE 1.10 PQ: 0 ANSI: 5
scsi 0:2:0:0: Direct-Access DELL PERC 6/i 1.22 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0xd8e0 ctl 0xd8d0 bmdma 0xdc00 irq 23
ata2: SATA max UDMA/133 cmd 0xd8e8 ctl 0xd8d4 bmdma 0xdc08 irq 23
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata3: SATA max UDMA/133 cmd 0xd8f0 ctl 0xd8d8 bmdma 0xdc20 irq 22
ata4: SATA max UDMA/133 cmd 0xd8f8 ctl 0xd8dc bmdma 0xdc28 irq 22
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=0557, idProduct=7000
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-1: configuration #1 chosen from 1 choice
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: PLDS DVD+/-RW DS-8A3S, HD52, max UDMA/100
ata3.00: configured for UDMA/100
usb 5-1.1: new low speed USB device using uhci_hcd and address 3
usb 5-1.1: New USB device found, idVendor=0557, idProduct=2223
usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.1: Product: CS-64U V1.0.081
usb 5-1.1: Manufacturer: ATEN Advance Tech Inc.
usb 5-1.1: configuration #1 chosen from 1 choice
input: ATEN Advance Tech Inc. CS-64U V1.0.081 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input2
generic-usb 0003:0557:2223.0001: input,hidraw0: USB HID v1.00 Keyboard [ATEN Advance Tech Inc. CS-64U V1.0.081] on usb-0000:00:1d.0-1.1/input0
input: ATEN Advance Tech Inc. CS-64U V1.0.081 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input3
generic-usb 0003:0557:2223.0002: input,hidraw1: USB HID v1.00 Mouse [ATEN Advance Tech Inc. CS-64U V1.0.081] on usb-0000:00:1d.0-1.1/input1
usb 5-1.4: new low speed USB device using uhci_hcd and address 4
ata2.00: failed to resume link (SControl 0)
usb 5-1.4: New USB device found, idVendor=413c, idProduct=2003
usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4: Product: Dell USB Keyboard
usb 5-1.4: Manufacturer: Dell
usb 5-1.4: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.4/5-1.4:1.0/input/input4
generic-usb 0003:413C:2003.0003: input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0
ata4: failed to resume link (SControl 0)
ata4: SATA link down (SStatus 4 SControl 0)
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 0 SControl 0)
ata2.01: SATA link down (SStatus 0 SControl 0)
scsi 3:0:0:0: CD-ROM PLDS DVD+-RW DS-8A3S HD52 PQ: 0 ANSI: 5
Fusion MPT base driver 3.04.19
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.19
alloc irq_desc for 38 on node -1
alloc kstat_irqs on node -1
mptsas 0000:04:08.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068 B0: Capabilities={Initiator}
scsi5 : ioc0: LSISAS1068 B0, FwRev=000a3300h, Ports=1, MaxQ=366, IRQ=38
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x5a4badb419313904
scsi 5:0:0:0: Direct-Access DELL MD3000 0735 PQ: 0 ANSI: 5
scsi 5:0:0:31: Direct-Access DELL Universal Xport 0735 PQ: 0 ANSI: 5
sd 0:2:0:0: [sda] 285474816 512-byte logical blocks: (146 GB/136 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 5:0:0:0: [sdb] 23429677056 512-byte logical blocks: (11.9 TB/10.9 TiB)
sda:
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 77 00 10 08
sda1 sda2 sda3 sda4 <
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sdb: sda5 >
sd 0:2:0:0: [sda] Attached SCSI disk
sdb1
sd 5:0:0:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda3
dracut: Loading SELinux policy
type=1404 audit(1329210893.408:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 225695 rules.
SELinux: 2048 avtab hash slots, 225695 rules.
SELinux: 9 users, 12 roles, 3576 types, 179 bools, 1 sens, 1024 cats
SELinux: 81 classes, 225695 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda3, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1329210893.918:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead-collector: starting
udev: starting version 147
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
bnx2 0000:01:00.0: setting latency timer to 64
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1a.fw
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:01:00.0: eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 36, node addr 00:26:b9:4f:cd:ad
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
bnx2 0000:01:00.1: setting latency timer to 64
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1a.fw
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:01:00.1: eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 48, node addr 00:26:b9:4f:cd:ae
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Jan 24 2012
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU8 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU9 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU10 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU11 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU12 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU13 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU14 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU15 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
Microcode Update Driver: v2.00 , Peter Oruba
scsi 0:0:32:0: Attached scsi generic sg0 type 13
sd 0:2:0:0: Attached scsi generic sg1 type 0
sr 3:0:0:0: Attached scsi generic sg2 type 5
sd 5:0:0:0: Attached scsi generic sg3 type 0
scsi 5:0:0:31: Attached scsi generic sg4 type 0
sd 5:0:0:0: Embedded Enclosure Device
scsi 5:0:0:31: Embedded Enclosure Device
ses 0:0:32:0: Attached Enclosure device
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88012db2a7e0), AE_AML_BUFFER_LIMIT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88012db2a790), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC (20090903/power_meter-759)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sdb1, type ext4), uses xattr
Adding 4193272k swap on /dev/sda5. Priority:-1 extents:1 across:4193272k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 61 for MSI/MSI-X
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 65 for MSI/MSI-X
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 66 for MSI/MSI-X
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 67 for MSI/MSI-X
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 68 for MSI/MSI-X
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 69 for MSI/MSI-X
bnx2 0000:01:00.0: eth0: using MSIX
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2 0000:01:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
eth0: no IPv6 routers present
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
type=1305 audit(1329210936.048:58505): auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 op="remove rule" key=(null) list=4 res=1
type=1305 audit(1329210936.048:58506): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1
readahead-collector: sorting
readahead-collector: finished
type=1400 audit(1329210947.722:58507): avc: denied { read } for pid=5377 comm="gdm-session-wor" name="root" dev=sda3 ino=1048577 scontext=system_u:system_r:xdm_t:s0-s0:c0.c1023 tcontext=system_u:object_r:admin_home_t:s0 tclass=dir
fuse init (API version 7.13)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
ERST: NVRAM ERST Log Address Range is not implemented yet
megaraid_sas 0000:02:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.